Attachments are not sent correctly?

When I send an email with an attachment, the recipient does not receive the attachment; even though I use the "send windows friendly attachments". This happens very often, specially when the recipient is a PC and uses any of the following servers: hotmail, yahoo, bellsouth, comcast, aol...etc.
Why is this and what can I do?

I had the same problem and it cleared up by placing the attached file at the bottom of the message box instead of just after the current message you are creating as part of a larger thread..
For example, you have a long thread that started a couple of days ago and you reply with your new message and you need to attach a file. Instead of placing the file after your new text, scroll down to the bottom of the entire thread and place the attachment as the last item.
Hope that helps,
bg

Similar Messages

When using Mac email, my attachments are not sent as an attachment.it's received as part of the email

Whn sending my emails with an attachment they are not received by the recipient as an attachment. It forms part of the email rather than as a n attachment. Recipient therefore cannot save or download my PDF. How can I change this?

Hi roddycam!
I have an article here that can explain what is happening and how to change the viewing of PDF's in Mail:
Mac OS X Mail: About PDF attachments
http://support.apple.com/kb/TA22343
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Mail created with "Send to Mail Recipient" disappear and are not sent

I have a small setup with a SBS 2011 server (Exchange 2010) 10 users with Windows 8.1 and Outlook 2013.
One user is trying to send mails with attachments to his college´s
but they are never send, are not shown in sent items and can not be found on the server.
The user right click on a PDF file and press "Send to Mail Recipient" Outlook opens his mail is entered into the receiver (internal receiver) and press send. The mail do not show up and as mentioned even in sent items.
I then try to do the same but send through the address book in Outlook / Exchange and these messages appears as they should.
One week later, the disappeared mails suddenly appears in the college’s mailboxes and it turns out there are some mails to external addresses as well, which were not sent until a week. All messages are now in sent mail but they have not
appeared anywhere else before.
I did some tests with the "send to" function which also had the mails disappearing - those mails has not turned up until now. (a week ago)
Now the user (AND all colleagues) are very nervous that something is wrong with their system and the mail does not arrive.
It is only 1 user this has affected but he is responsible for the majority of sales in this company and they are very afraid that they are not responding correctly to large customers.
Is there anyone who can help with debugging in such a case?
I have tried repairing Outlook, started in safe mode, checked the mail server for hanging mails but nothing shows any errors.
Thanks in advance.
Michael Grøn
Michael Gron

Hi,
Have the user logon OWA and send the attachment, will this issue persist?
Please also confirm if the issue exists when inserting an attachment when composing a new email isntead of using the "Send to Mail Recipient" function.
Since only one user has been affected, use MFCMAPI to find if the message is stuck in the user's mailbox:
https://mfcmapi.codeplex.com/releases/view/118446
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Wf mails are not sent

Hi
Workflow mails are not sent.
The global preference was set as Do not send emails, we changed the same to mail with attachments. After that we ran resend failed or undelivered messages request. Even then the messages are not sent.
mail_status is null in wf_notifications table for all of these messages.
None of the activities are errored.
I appreciate if any body faced similar situation and can point me where things are going wrong.
Thanks
Prasad

The notifications that were sent when the preference was set to "Do not send mail" are not considered failed or undelivered. Those notifications at the time they were sent were not supposed to be sent as e-mail.. so not sent. If you want them to sent as e-mail, you will have to manually update the MAIL_STATUS to MAIL, run $FND_TOP/sql/wfntfqup.sql to rebuild the mailer queue. This will take care of sending all those e-mails.

HT3939 Hi! Special characters such as è, ê and À are not dislayed correctly when received on an iphone, they appear like ¨c,¸e and R, why?

Special characters such as è and À are not displayed correctly on my iphone but are no problem in my Outlook.
Emails are sent from a blackberry Z10
Thanks

Special characters such as è and À are not displayed correctly on my iphone but are no problem in my Outlook.
Emails are sent from a blackberry Z10
Thanks

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

PO screen custom fields are not in correct order

Hi Experts,
After creating Shopping cart and purchase order successfully created.
Added my custom fields for PO structure INCL_EEW_PD_ITEM_CSD_PO fields are visible in PO screen automatically with out adding my custom fields in PO layout /SAPSRM/WDC_DODC_PO_I_BD
when i go to PO screen i can see my custom fields but all fields are not in correct order.How can my fields should be in order.
and i added two custom buttons in my PO layout for WD component /SAPSRM/WDC_DODC_PO_I_BD i am not able to see my buttons?
Could you please help me out in this issues its urgent.
Thanks,
Venkatesh G

I've had this problem. There may be a more elegant solution, but what I do is make a playlist of the album and put the movements in the correct order in the playlist. I've also put numbers (01, 02, etc.) in front of the name of the movements. Either one works.
Hope this helps.
Ben

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Some icons are not shown correctly in Gnome tray

The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
I noticed that Synergy icon behaves also wrongly.
thanks
Jan

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Search for member activities - points are not displayed correctly

Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
Anne

Sometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt

Vietnamese fonts are not displayed correctly.

The Vietnamese input program worked fine in the previous version but in version 4 the texts are not aligned correctly. See this http://i485.photobucket.com/albums/rr219/september17th/untitled-16.jpg
The character set used is Composite Unicode and input method is VNI. I tried VN forum but no one care about it =.= Also this is the FF problem those texts displayed correctly in Chrome. Those posts are here http://www.tinhte.vn/tin-tuc-su-kien-10/hp-va-dell-cong-khai-chi-trich-ipad-2-cua-apple-644640/index15.html

I also have this problem, hope this problem will be fixed in the next release. More info: http://vozforums.com/showpost.php?p=28008790&postcount=61

Entity Descriptions are not displayed correctly in Combo box dropdown list

In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?

Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha

Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

Firefox display problems regarding this customers site:
http://gardenia.dk/collections/collection/
Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards,
Annette

This article might help you-
https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

Files from Windows 7 are not alphabetized correctly on OS X, and can match identically named files in the same folder

I receive MS Word files from students using Macs or Windows-based computers. This year, files prepared by students using Windows 7 are not alphabetized correctly on my Mac (under Snow Leopard or Mountain Lion). The same four students keep having their files put at the END of the alphabetical sort by name, even though the files should appear earlier in the list. I have to copy the file contents and paste the contents into a new document to get the new document to appear in the right order, and if I do so, then BOTH the old and new files appear in the Finder, even though the names appear to be identical! So can have to files with the same name in the same folder, which ought to be impossible. Does anyone have any idea what's going on?

Bingo!
The problem is not the letters themselves, but non-letter characters in the file name; this showed up with the fixed-width fonts. The apparent duplicates and mis-sorting are caused by dashes, which differ because they're done as en-dashes in one file name and em-dashes in the other file name, or by curly or straight apostrophes. I didn't see that in the Finder window.
I never saw this behavior before this year. Last year, when I was using a Mac for the first time, I did not see any such problem, even though my students' files were named using the same conventions. When I was using a Windows-based laptop before that, I never saw the problem.
Windows must do something to style the non-letter characters differently than a Mac. Is there any place in Windows Explorer or the OS X Finder that styles characters this way? I can see this being a big problem for someone who needs to sort very important data by name, when the files are coming from different operating systems!
(I just Googled en-dash, em-dash, and curly quotes with file names, and found a good number of posts on various sites about similar problems based on ASCI character coding, html coding, Windows Explorer, and other applications. Sometimes the files don't appear at all, because the application reading the file name can't deal with a certain ASCI code. What a mess.)

Attachments are not sent correctly?

Similar Messages

Maybe you are looking for