Attachments Cox Communications

I noticed an article detailing difficulties receiving sent images.
I use Cox Communications as my ISP. For the last two-three weeks, any image sent to me via e-mail, either embedded or attached, takes 'seems like foreve'r to open.
I've thought maybe Cox had installed some fancy new filtering system. My e-mail preferences have been checked and rechecked. Nothing out of sync.
Any suggestions, anyone.
G5 iMac Mac OS X (10.4.5) 1 Gig Ram
G5 iMac Mac OS X (10.4.5) 1 Gig Ram

Is there a network/ethernet jack you can plug your router into? If so plug a network cable from the jack to the internet port on your router. Then another cable from the 1, 2, 3, or 4 port on the back of the router to a PC. Now access the routers user interface by opening your browser and typing in http://192.168.1.1 into the address field. That should open the routers log on window and by default the user if left blank (some routers the user is admin) and the password is admin. That should get you into the routers set up and make sure the router is set to Obtain IP address automatically. Then go to the status tab and make sure it shows a WAN IP address. If so you are on line. So if you plan on using the wireless option go to the wireless tab. From there change the SSID to something other then linksys so you can identify your wireless network. Then go to the security tab and set up what ever security you need.
Here is a link you may find other hints. You should print it out and give it to the other Condo owners.
(Mod note: Inserted hyperlink to keep other browser from stretching.)
Message Edited by OnnagokorO on 07-09-2007 05:06 PM
Richard Aichner (Ikester)

Similar Messages

I have an older IMAC running 10.6.8. No more than 4GB available. Cox Communication just updated my email service, which requires 10.7 or greater. I can use my email but cannot attach a document. Any help?

I have an older Imac running 10.6.8 with 4 GB capacity. Cox Communications just updated the email service, now I cannot attach a document to an email. Cox says my operating system not compatible. Any suggestions?

If Firefox doesn't work, check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.

Unable to setup a second email using cox communications

I have a droid razr maxx and have set up one e-mail account with no issues, but I've tried to set up one using cox communications and I'm unable to connect to their server... Any thougts?

Give this a Look an See if Can Help ya
Quick links
Personal Email set up
Delete Email Accounts
Some common ISP / Email provider manual settings
Unable to add email accounts which were previously added. Error message "you have already added this email account".
Corporate Sync, Enterprise, Corporate Exchange Server Email
Corporate Sync provisioning errors
Community Advice
Email community advice and discussions
Follow the steps listed below to set up your personal email account or Exchange (corporate sync) email accounts. If for any reason, your email account is not listed here, or you are having problems with your email account, please contact your emailprovider for assistance.Adding an Email Account
Open the Applications tray, tap MyAccounts.
Tap Add Account
Tap Email Accouns
Select an email account to add
Enter the username and password. Some of the more popular email accounts will be able to set up automatically.If you are unsuccessful with setting up your account automatically, touch Other from the email accounts screen and deselect automatically configure account by removing the checkmark. Use the chart listed below for the more popular email settings.
Tap Next.
Tap Incoming Server.
Enter the appropriate information.
Tap Outgoing Server.
Enter the appropriate information.
Tap Ok.
Tap OK.
During the connection, you may be asked to complete a manual set-up if your email provider is not recognized, your email address/password is incorrect, or if your email provider has restrictions on mobile email set-up. Please check with your email provider to obtain any of that detail. You will need your password, login name, POP3 or IMAP port, and server settings to complete a Manual set-up. If you have this information ready, proceed to next section regarding Manual setup. We have listed a chart of manual settings for some POP3/IMAP email providers at the bottom of this FAQ.
Unable to add email accounts which were previously added.Error message is "you have already added this email account"
Logon to myverizon.com using the account tied to your phone. Once you are logged in, go to Sync & Connect accounts and delete any existing account. CLICK HERE to view example.
Delete or remove Email & IM accountsThe process below describes how to delete all email accounts set-up under your Email application; not your Gmail application. You can only remove the Gmail account set-up under your Gmail application by completing a Factory Data Reset.
To delete either your Personal or Exchange email account, follow these steps:
From the home screen, tap Apps
Tap My Accounts
Touch the email account you wish to remove
Once you are in the account Take you finger an gently roll the page up to were you can See REMOVE ACCOUNT
Touch Remove account an the account should remove itself. Then Tap the Home button to Exit
If you do not see you email account listed under My accounts, Logon to myverizon.com using the account tied to your phone. Once you are logged in, go to Sync & Connect accounts and delete any existing account. CLICK HERE to view example.
Some common ISP / Email provider manual settings.!!!!!!
Click on ISP name link for more detailed set-up instructions:
POP3/IMAPAccount
ServerType
Incoming Server
Incoming Port
Usesecureserver
VerifyCert.
Outgoing Server
OutgoingPort
Use secureserver
VerifyCert.
Aim.com
IMAP4
imap.aim.com
993 (or 143)
Yes
Yes
smtp.aim.com
465 (or 587)
Yes
Yes
aol.com
IMAP4
imap.aol.com
993 (or 143)
Yes
Yes
smtp.aol.com
465 (or 587)
Yes
Yes
Aim.com
POP3
pop.aim.com
995
Yes
Yes
smtp.aim.com
587
Yes
Yes
aol.com
POP3
pop.aol.com
995
Yes
Yes
smtp.aol.com
587
Yes
Yes
att.net
POP3
pop.att.yahoo.com
995
Yes
Yes
smtp.att.yahoo.com
465
Yes
Yes
bellsouth.net
POP3
pop.att.yahoo.com
995
Yes
Yes
smtp.att.yahoo.com
465
Yes
Yes
charter.net
IMAP4
mobile.charter.net
993
No
No
mobile.charter.net
587
No
No
charter.net
POP3
mail.charterinternet.com
110
No
No
smtp.charterinternet.com
25
No
No
comcast.net
POP3
mail.comcast.net
995 (or 110)
No
No
smtp.comcast.net
587
No
No
cox.net
POP3
varies by location
995 (or 110)
Yes
Yes
varies by location
587 (or 465)
No
No
earthlink.net
POP3
pop.earthlink.net
110
No
No
smtpauth.earthlink.net
587 (or 25)
No
No
excite.com
POP3
pop3.excite.com
110
No
Yes
smtp.excite.com
25 (or 587)
No

Email issues with iP4, Cox Communications

So I convinced my mother to get an iPhone 4 yesterday, and I have been setting it up for her.
She has Cox Communications (omaha, ne) email, and the AT&T guy told me it should be easy to set up her email on the phone.
I set it up with her name, email, password, etc on the phone, but the phone wouldnt download any messages to the inbox?
It can recieve the emails I send as tests, but it wont recieve messages from my dad or others that show up in her outlook on her computer.
I went to the Apple store here in omaha, but he just deleted the account and reset it up and the problem still is there. we logged on to the webmail version of the email, and it was also empty. But she still had messages on her Outlook on her computer, but they wouldnt transfer to the phone.
She can still recieve my emails from both my own iphone and macbook.
I am totally at a loss. The Apple guy who helped us could send her an email and it showed up (on both the Outlook and the iPhone), but no other messages will. He said it was probably an issue with Cox, and to call them. But when I called them earlier (first step to try to resolve the issue, before driving out to the Apple store), they just gave me the servers for incoming and outgoing, along with ports, and they said to go to Apple if it still didnt work. Then I had the Apple guy direct me back to Cox.
I'm getting the run around, and no solutions.
Any help?

Note this procedure may be a little different depending on the version of Outlook.
Open Outlook. Click "Tools" on the top menu bar. Select "Account Setting". Click on the name of the account.(on the "E-Mail" tab). Click on "Change". Click on "More Settings". Click on the "Advanced" tab. If not checked, click on the check box for "Leave a copy of the message on the server"

HT2693 When I updated to the new security fix, my COX Communications e-mail server will no longer send e-mails.

When I updated my MacBook Air to the newest vwesion of Mountain Lion, because of the seurity fix.
My CoxCommunications outgoing mail server no longer works.
I called COX and they indicated that they had received thousands of calls asking for help with the same issue,
Any halp would be appreciated...
Best,
Mike

Hey MJB1101!
You may need to try the troubleshooting steps located in this article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

TS3899 Cox Communications & iPhone/iPad/Mac email

There are several of us here at the office that have cox email and iPhones or iPads. We can receive email on our cox account but can't send. In my case I can't send on my phone, tablet or macbook. Any suggestions why all of a sudden this would happen?

Hi TJ,
I'm sorry for the delayed reply! Have you been able to get your email working correctly on your iPhone and iPad? If you are still unable to send mail, check your settings using the steps outlined HERE.
If your settings are correct and you are still having difficulty, feel free to email my team at [email protected] We will get it figured out for you!
Sincerely,
Becky K.
Cox Social Media Support Specialist

Cox Communications & Verizon are Teaming Up

Just seen the Commercial setting on my Couch and i about fell out of it.. The more i find out i will Post..
They did say on the Commercial that you can get Wireless at the Solution Stores and for Signing up for Certain services you can get a $400.00 Visa Pre-Paid Card..
Message was edited by: b33 .
Here is the Link: for Verizon / Cox
http://shop.verizonwireless.com/?id=coxcommunications

Wildman i seen it for the First time in with the 10:00 O clock news and like i mention was Very surprised but then again i'm wondering if Cox is try to fix there little Debacle when they tried to start there own Cell service using Sprint and it back fired back on em.! Now there Going this Route we shall see i guess..
i'm going the same Route & Not changing my Stuff.! b
Edited: at 3:47am b33

Problem opening docx Word attachments in Communications Express

We have a problem where some Word documents of the .docx type won't open properly in IE. IE will treat the docx file as a zip file, and offer to open it up using zip, instead of Word. The strange thing is that some docx files open fine into word, but others don't. Also, we have yet to see any such problem in Firefox. The basic work-arounds are to right-click on the attachment link and save, and then open it in Word, or to suggest the user uses Firefox.
We're at a point where we think the problem is with the version of Word (or OpenOffice or whatever) that creates the document, and that it's putting weird things into the headers of the document. Our thought was that adding "docx" to the MIME types for Word could fix the problem, so I did the following on our test system. I opened up /var/opt/SUNWwbsvr7/https-{SERVER-HOSTNAME}/config/mime.types and changed the following line:
type=application/msword exts=doc,dot,wiz,rtf
to read:
type=application/msword exts=doc,dot,wiz,rtf,docx
I then stopped the webserver, removed the cached(generated) files, start the webserver, deleted the cache on IE and tried again. IE still treats the docx file as a ZIP file. Our patch level for UWC is 122793-30.
Is there some other place to look at for modifying MIME types for UWC?

Kdcypher wrote:
On our test server, which has both UWC & Messaging Server running on the same box (in prod, these functions are on separate hardware), I made these changes in /var/opt/sun/comms/messaging64/config/mappings and [same_path]/conversions, which I understand to be the config dir for the back-end Messaging Server (in case you hadn't guessed, I'm not necessarily our mail guru, but his plate is extremely full at the moment, and I'm getting to learn more about Messaging Server by working this problem). Do I need to be setting this up elsewhere, as in under UWC?You only need to configure these files at the MTA level. Make sure the conversions file is owned by the messaging server user/group (mailsrv:mail by default).
Also make sure the mappings entry is exactly how I provided (including leading spaces).
My testing yesterday, using your configuration suggestions, was all from Firefox, which could explain why your code wasn't working because (as I understand it) your code was set to convert anything with a content-type of "application/x-zip-compressed" and would ignore anything with "application/octet-stream"You can add additional rules to the conversions file to handle the various scenarios.
So it did not get changed by the server.Please provide the mail.log_current entry for the above attempt.
Is there any way to tell "imsimta cnbuild" to be verbose and actually tell me what it's doing?The cnbuild command compiles the MTA configuration files. It either works or it doesn't.
Or is there a log file that contains details of what it's doing?You can enable more verbose MTA logging e.g.
=> add "slave_debug" to the source channel (e.g. tcp_intranet) in the MTA imta.cnf file
=> add MM_DEBUG=3 to the MTA option.dat file
=> run ./imsimta cnbuild;./imsimta restart
=> re-run your test, this should result in a file called tcp_local_slave.log-<something>
In that file you should see something like the following:
12:22:48.59: Checking CONVERSION entry #1
12:22:48.59:   IN-TYPE pattern: application, actual type: application
12:22:48.60:   IN-SUBTYPE pattern: x-zip-compressed, actual subtype: x-zip-compressed
12:22:48.60:   Checking IN-DPARAMETER-NAME #0
12:22:48.60:     Dvalue: filename, pattern: *.docx, actual value: SR7285240.docx
12:22:48.60:   Out channel pattern: ims-ms, actual out channel: ims-ms
12:22:48.60:   Entry matched.
12:22:48.60:   New content type: application
12:22:48.60:   New content subtype: vnd.openxmlformats-officedocument.wordprocessingml.document
12:22:48.60:   New content disposition: attachmentRegards,
Shane.

I cannot add an e-mail account (Cox) on my iPhone 5S that is in the "Other" category and is a POP account. The phone seems to automatically create the account as IMAP. How to I create a POP account?

I cannot add an e-mail account (Cox communications) on my iPhone 5S that is in the "Other" category and is a POP account. Yhje phone automatically creares the account as IMAP. How do I create a POP account?

This indicates corrupt files.
A restore should resolve.

PO attachments - sending a selected attachment

Hi,
Scenario: Created a PO, added several attachments in PO. Trying to send selected attachment to Vendor but all the attachments are communicated.
Need to know how to send a particular attachment in the PO to Vendor of the PO.
Is there any customization required "to send a particular attachment in the PO to Vendor of the PO ."?
In Which user exit / badi I can control the documents, so that i can send only the particular document to Vendor.
Thanks in Advance,
Baburaj

Hi,
Can you let me know the procedure of sending the PO along with attachemnts as i am not bale to send attachmnets for the PO. when i send a mail only the PO is sent but not the attachments linked to the PO.
Thanks and Regards,
Sireesha

Any other Cox users having trouble sending?

Was just wondering if any other cox communications email users are having trouble sending email when using 3G? When I'm home and connected to my wifi, it's fine. but as soon as I leave the house and try to send from my cox accounts, it tells me the sender's address is invalid, even though it's not. it does this for everyone...not just one recipient.

Cox is one of the ISPs which blocks the outgoing port 25 outside of their network.
On your iPhone, go to Settings>Mail, Contacts, Calendars> Your email account.
Tap on SMTP.
On the next screen you should see a list of secondary servers.
Tap on AT&T SMTP server.
Turn the Server ON.
Go back out and you should be able to connect when away from your home network.

Modbus Protocol Communication using RS 485

Hi all,
I am facing one problem while communicating with Radix Instrument using Modbus RS 485 Interface.can anybody help me in this,
The instrument which i am going to communicate is Radix ISOSCAN(16 Channel Temperature Scanner).
The instrument is having Modbus RS 485 interface facility.
To that instrument,RS 485 Configuration is there.And I am using RS 485 to RS 232 Converter for communicating with my PC.
I downloaded Modbus VI Library from NI and I programmed using Modbus VIs.
I got the instrument Register Addresses also.From this instrument,I want to read 16 channel temperature values.For this,in Modbus terminology we will call as Process Variables(PV).
For this,I used Read Input Registers(Function Code 04) and I have doubt in configuring Starting Address terminal of "MB Serial Master Query.vi".Because,here if we see the datatype of this terminal,it is U16.But if we see the Instrument register addresses,it is of floating point type.
Actually first of all I am not getting any out put from "Registers" terminal of "Modbus Master Serial Query.vi"
Actually as i have to read(Read Only) 16 channel Data from the instrument,and as per the link mentioned in ni "Introduction to Modbus" topic,
http://zone.ni.com/d...a/tut/p/id/7675
I selected "Read Input Registers" with Function Code "04".
As per the link above,If starting address is 40008,we have to give 7,If it is 40009,we have to give 8 ...
So as per the instrument register addresses,what i got from the instrument design people,Addresses are starting from 40001,
So I tried in the following ways
Test 1:
Following as inputs for "Modbus Master Query.vi",
1.With Read Input Registers
2.With Starting address as "0",
Test 2:
Following as inputs for "Modbus Master Query.vi",
1.With Read Holding Registers
2.With Starting address as 1 also,
But in both the cases I am not getting any value from the Registers terminal of "Modbus Master Query.vi"
Also i have gone through the link which is in ni developer zone forums,i.e.
http://forums.ni.com...uireLogin=False
Also i observed one thing while running the code anna,
I am using RS 485 to RS 232 converter for communicating with the instrument.
From this converter,there are two output terminals(TXD) and (RXD) with boolean indicators(one for the TXD and one for RXD).I think these are send and receive commands for serial communication(RS 232)
Observation is that,whenever i am running the code,the boolean which correspond to TXD is blinking,
But there is no indication from boolean of RXD.
I think,the code which is running in my PC is sending command but because of some reasons there is no reply(as there is no indication from RXD boolean) from the instrument.
I am thinking that the with the starting address what i am giving in the VI,its not able to search for the registers...,
Regarding RS 485 to RS 232 Converter,
In front end,one side, two terminals(D+ and D-) are connected to Instrument D+ and D- Terminals.
Another side,three terminals(230 VAC,Neutral and Earth) given supply Line,Neutral and Earth Terminals.
And in front end,9 Pin Female(RS 232) Connector is there and i used one Serial Female to Male cable for connecting my PC to the Converter RS 232 port.
Can anybody support me so that i can solve this problem...,
Regards,
Bujjin
Attachments:
Modbus Communication RS 485(8.2).vi ‏31 KB
RS 485 to 232 Converter Front View.JPG ‏12 KB
MODBUS-RS485-STD.pdf ‏128 KB

If you have a 32bit Floating point number (Single Precision) in your register than you must read to U16 number, concanate them by using the "join Numbers.vi and then typecast them into a Single Precisio. See the image Below for more detailed information.
I'm not sure if you are still having problems with this if you are please re post and we will be glad to help you
thanks
Regards,
CharlesD
Digital MultimetersSchedule a Free 1 Hour LabVIEW Tutorial with an NI Applications Engineer

Why does my phone only offer attachments to be opened in drop box and evernote, when before it always gave me the "open in i-note" option-suggestions

does the iphone 4 only offer 2 "open-in" options when dealing with email attchements?
mine used to always offer teh I-note option now it only offers evernote and dropbox- any ideas?

Hello,
Sorry to just now be getting back to you, but with Thanksgiving and my granddaughter's wedding yesterday, I've been too busy and stressed to worry about my phone again until now.
Yes, I used the default email application, and the email provider is Cox Communications. Anything you can do to help would be appreciated. Also I was wondering if I should change to IMAP (from POP3)....perhaps that would help the problem? Don't know, as I don't know anyone else who uses IMAP. Your help, again, would be appreciated.
Thank you.
Margie Barber

TCP Communication Problem - not passing data???

Hello.
I am working on TCP communication. I need to pass data from one PC to another and vise versa. I started with the shipped example TCP Communicator Active and Passive VI. Using the shipped example only with the Wireless Unit connected to both PC i am able to communicate and pass data between each PC.
Now, placing the shipped example VI to my Main VI (separate while loop), I am NOT able to make it run properly. What happens is even if i move the control data on one PC it does not update to the other PC.
I am attaching the example VI and I would appreciate for any advise.
Thank you very much.
regards,
jtc
Attachments:
TCP Communicator Active.vi ‏51 KB
TCP Communicator Passive.vi ‏53 KB

Hi jtc,
"if you need to share data aquiired rapidly, a work-around is to accumulate the acquired data and send larger "bundles" less frequently" - do you have a simple example VI for this?
No! - though we could develop something - but a solution for the current example, might not be helpful to your final program. For instance, we would capture & accumulate a "batch" of data "produced" by individual user actions, then send the "batch" of data to the other machine and what? Perform all the updates to the GUI in rapid succession (what's the point?.) Show the last user action/setting?
It might be a good time to develop the architecture for the Master and Slave applications.
This sounds like an interesting application! Do you mind sharing some detail? For instance, are the slaves generating data? Are there a fixed number of slaves? Is it necessary to mirror the Master's data on all the connected slaves?
Like Johnny-5 said: "Input, I need Input!"
Cheers!
Message Edited by tbd on 10-17-2008 08:29 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Trouble connecting AEBS with Cox & Motorola cable modem

I am able to set up my new AEBS however I cannot connect to internet. I am told via Airport Utility that I have set up correctly and have the steady green light and the wireless connection however it just won't pick up the Internet. I've called my ISP Cox Communications and they told me it's an issue w/my router. I noticed a similar problem in discussion boards with Comcast and followed the same instructions and it did not resolve. I've tried to power off cable modem for 10 sec, 2 min and 10 min and just no luck. I immediately plug back in my Linksys router and am able to connect to internet just fine.
Anyone know what to do?

Magand wrote:
I've tried to power off cable modem for 10 sec, 2 min and 10 min and just no luck. I immediately plug back in my Linksys router and am able to connect to internet just fine.
Anyone know what to do?
Power off your cable modem for at leat 10 HOURS! Cox like every other ISP "caches" the MAC address of your router. The only way to "reset" this and allow a new MAC address to be accepted, is to turn off the cable modem overnight for 8-10 hours.
Some routers have the ability to "clone" a previous router MAC address, therefore not requiring the above process, but the AEBSn does NOT have this capability.

Attachments Cox Communications

Similar Messages

Maybe you are looking for