Attachments in module pool
HI iam working on a Module pool, is it possible to have an attachments on the screen where we can upload or download any file.please help me in this if it is possible thanks in advance.
Regards
Hi Kiran,
have you looked at [Generic Object Services|http://help.sap.com/saphelp_nw70/helpdata/en/c4/3fe63659241157e10000009b38f889/frameset.htm]?
Cheers
Graham Robbo
Similar Messages
-
Hey guys,
i need to implement attachments in my module pool program, can anyone help me with this scenario in step by step procedure with code...
Thanks,
Abhishek.Hi,
To attach documents this is the flow.
You must be saving the transaction no in a table.
This transaction no. must be a key field there. If not make it as key field.
After that, define a new business object using SWO1 transaction. Accept what ever it proposes and sounds correct.
Create table key field(your transaction no field) as Key field in this business object.
Now go to OAOR transaction and execute, enter the business object you created in class name, BO in class type and a transaction no. already existing in your table.
In the next popup say Ok.
Here you can add attachments in the create attachments on the lower left tab.
Now go to FM GOS_EXECUTE_SERVICE in R/3 and execute with this details..you can see what you have attached.
If you are in Solution Manager or CRM system then you have different FM which is better. Unfortunately that is not there in R/3.
what you can do is make a BDC recording such that it takes the transaction no. from your module pool and lands directly in attachment screen where user can attach attachments directly.
Now go to FM GOS_EXECUTE_SERVICE in R/3 and execute using same transaction no. you will get to see the attachments.
Let me know if its not clear.
chk this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
Hope this helps.
Regards
Satish -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to use table maintenance view in module pool screen
hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.You can simply call it via SM30. Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = 'Z_Table_Name'
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
Regards,
RIch Heilman -
Error while transporting modification in module pool of a specific infotype
HI experts,
While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
Any suggestion .
Tanhks a lot .Hi ,
Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
And it would be great if you can just put in your remarks about the best solution you had in solving that problem.
It might be useful to other users when they encoutner such problem.
BR,
Vijay. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Module pool - table control - update ztable
hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
zc2p_lider_crtl-lines = ln + 10.
init = 'X'.
endif.
ENDMODULE. "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule. " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'LIDM'.
CALL SCREEN 101.
WHEN 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'SORT'.
DATA: fldname(100),help(100).
READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
SPLIT col-screen-name AT '-' INTO help fldname.
SORT it_zc2p_lider_modul BY (fldname).
WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
flg = 'Y'.
WHEN 'BACK'.
CALL SCREEN 100.
LEAVE SCREEN.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'SAVE'.
MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
COMMIT WORK.
ENDCASE.
ENDMODULE. "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
MODULE set_screen_fields.
MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
> MODULE status_0101.
> LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
> MODULE set_screen_fields.
> MODULE change_sdyn_conn.
> ENDLOOP.
> *
> PROCESS AFTER INPUT.
> MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
> LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
> MODULE read_table_control.
> ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
MODULE read_table_control.
ENDLOOP.
MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT". -
Can we use Initilization event in module pool program?
Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL -
Module Pool - Table Control - Data not getting displayed in Control
Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
SELECTED TYPE C,
TEXT TYPE DPR_CAUSE_T-TEXT,
end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA: lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.Hi Sonali,
When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed -
Hi,
How can we print Descriptions and other text as text lable in module pool????
Thx,
Shashi.Hi,
IF you want text for box heading in moodule pool...
than just double click on that box and write for lable in text part of attribute window.
<REMOVED BY MODERATOR>
Gaurav J.
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 3:46 PM -
Edit a field in ALV tree in a subscreen of a module pool
Hi
I want to make a field editable in the ALV tree based on some condtions in a subscreen of a module pool. I used the edit = 'X' field in the fieldcatalog still it is showing the field as display and not edit.
Please help me to get the field as editable and save it to the database table.
Please not this is ALV TREE
Regards,
MozilaHi Mayank,
Thanks for the reply
I am using oops method.
I tried making the field which is to be made editable as wa_fieldcatalog-edit = 'X'. But its not working. I didnt get you when you said edit in layout object.
I also went through the demo programs but these programs are not having editable fields.
My code is as follows:
IF tree4 IS INITIAL.
* create container for alv-tree
l_tree_container_name = 'TREE4'.
CREATE OBJECT l_custom_container
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
* create tree control
CREATE OBJECT tree4
EXPORTING
i_parent = l_custom_container
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_multiple
i_item_selection = 'X'
i_no_html_header = 'X'
i_no_toolbar = 'X'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
* create hierarchy
CALL METHOD tree4->set_table_for_first_display
EXPORTING
is_layout = s_layo
CHANGING
it_sort = it_sort
it_outtab = it_final
it_fieldcatalog = it_fieldcat.
ELSE.
CALL METHOD tree4->refresh_table_display
EXPORTING
it_sort = it_sort
EXCEPTIONS
program_error = 1
failed = 2
cntl_system_error = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif. -
Remove field in Alv grid module pool
Hi Experts,
I have a requirement where in I need to remove a field on the display screen for a particular record.
In detail..
I have a created a module pool program where in the final out put was shown using CL_gui_alv_grid on the new screen.The normal display will start with a check box(editable),kunnr,ktokd etc..The requirement is for a particular record the check box should either disappear or disable.Please help me out in achieving this.Thanks in advance.
Initially I got very good response from Neha and Satya and felt very confident enough in the fix but I dont know where I am doing wrong the issue is not yet fixed.Satya or Neha can you tell me where am I doing wrong seeing the below code.
types:BEGIN OF lty_final,
chbox TYPE char1,
org_nam TYPE name1_gp,
vkorg TYPE vkorg,
parvw TYPE parvw,
ktokd TYPE ktokd,
kunnr TYPE kunnr,
pr_cnt TYPE char3,
fir_nam TYPE name1_gp,
las_nam TYPE name1_gp,
parau TYPE parau,
telf1 TYPE telf1,
STYLE TYPE lvc_t_styl, " New field added in the structure
END OF lty_final.
data:lt_final type table of lty_final,
ls_final type lty_final.
DATA : ls_stylerow TYPE lvc_s_styl ,
lt_styletab TYPE lvc_t_styl .
loop at lt_final into ls_final. """Final internal table
if ls_final-pr_cnt = lc_yes.
ls_stylerow-FIELDNAME = 'CHBOX'.
ls_stylerow-STYLE = cl_gui_alv_grid=>mc_style_disabled .
APPEND ls_stylerow TO lt_styletab.
CLEAR ls_stylerow.
ls_final-STYLE = LT_STYLETAB.
MODIFY lt_final INDEX sy-tabix FROM ls_final TRANSPORTING style.
endif.
endloop.
gs_layout-zebra = 'X'.
gs_layout-edit = ' '.
gs_layout-no_rowmark = 'X'.
gs_layout-stylefname = 'LT_STYLETAB'.
CALL METHOD grid_display->set_table_for_first_display
EXPORTING
i_save = 'X'
i_default = 'X'
is_layout = gs_layout
CHANGING
it_outtab = lt_final
it_fieldcatalog = gt_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards,
Srini...Use the following codes in loop it will work.
Loop at lt_final into ls_final. """Final internal table
if ls_final-pr_cnt = lc_yes.
ls_stylerow-FIELDNAME = 'CHBOX'.
ls_stylerow-STYLE = cl_gui_alv_grid=>mc_style_disabled .
INSERT ls_stylerow INTO TABLE lt_final-STYLE. " use insert
*APPEND ls_stylerow TO lt_styletab.
*CLEAR ls_stylerow.
*ls_final-STYLE = LT_STYLETAB.
*MODIFY lt_final INDEX sy-tabix FROM ls_final TRANSPORTING style.
endif.
endloop.
Regards,
Gurpreet -
Regarding selection-screen in module pool
hi
experts,
i am having doubt in module pool programing...
i want create selection screen(pop screen with field) in modulepool., before the display screeen deatils
ex : if i want display the record details for that particular
record number.......
while i am click on display..
pop-up-selection screen will come with record number field..
i f enter the record no, display s the details...
AnanandPlease see Rich's answer here:
[Dialog programming - How to place a select-option field in a dialog screen;
Rob -
Input must bein module pool and the output should be in ALV report
Dear Friends,
Greetings.....................
Please give me solution for my problem.
Consider there is one module pool screen with the fields empno, edob, ecity.There is one search button.if the user clicks the search button.it should display the employee details based on empno and output must be in ALV reports.
Thanks in advance
RajHi,
Try to use
call function 'REUSE_ALV_POPUP_TO_SELECT'
exporting
i_title = text-021
i_zebra = 'X'
i_tabname = 'P_YSIZE1'
it_fieldcat = p_fieldcat[]
it_excluding = p_excltab[]
i_screen_start_column = 02
i_screen_start_line = 02
i_screen_end_column = 45
i_screen_end_line = 15
importing
e_exit = p_exit
es_selfield = p_selfield
tables
t_outtab = p_ysize1.
a® -
Icon display in Module pool screen not visible to some users
Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
SumithAs I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell
Maybe you are looking for
-
Unresponsive/dead iPhone 5 after iOS 8 update.
-
Multiple independent devices on Single installation with independent monthly rental charges
Hi Experts, 4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I
-
Mandatory field Export/Import Procedure for Foreign Trade
Hello all! Is there any possibilty to define the field Export/Import Procedure for Foreign Trade within the infoset as a mandatory field? Table T162 doesn't show me this field. Kind regards, Barbara
-
Dynamic MailAdapter Receiver Agreement using S/Mime
Hi, I need some help at an specific problem with the SAP XI Mail Adapter. First a little scenario description: In our business there are 10 Email addresses and we have 250 businesspartners. We want to send Emails in a secure way (S/Mime), but we woul
-
Having problem when i try to save an image
i had firefox on my old laptop then i backup my profile with MozBackup and transfer it to my new laptop after that when i try to save an image from web using "Save Image As..." a "rb" extension appears at the end of file name like this : "FILENAME.jp