Attachments: Name of Attachment inserted at bottom of email once the attachment is saved or deleted
Folks:
When I get an email with an attachment and I delete the attachment before filing the email to keep my pst file small, there is no record of the attachment name left.
It would be nice if Exchange added the attachment name to the bottom of the email at the moment the attachment is deleted so that when you look at the email in the future you would see what attachments had been part of the original email.
Regards,
Keith
Hi Keith,
I suggest ask Development for help.
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchangesvrdevelopment
Thanks
Similar Messages
-
iOS 8.1, mail fumction, date at bottom of email accounts the date hasn't changed since 9/26/14. How can I fixed this?
Thanks for the reply Brenden. However the problem is:
At the very bottom of the "Mailboxes" screen (where I've got 6 email addresses that do work) there is on the far right (bottom right corner) an icon to compose a new message.
In the center of that space is a generated message that says: 1) "downloading x of y" and 2) when finished downloading it says "Updated on 9/26/14." today is 11/6/14!
My problem is that that date hasn't changed since I upgraded to iOS 8.1. The emails are current, but that date isn't!
Can you help? -
Just bought the iPhone 5. After adding my Yahoo! Mail account and checking my email, I noticed that none of my emails have a "Reply" option toolbar at the bottom of the email screen and I am unable to compose any emails from the mail app.
Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W. -
All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please helphttp://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0
-
Email Billing document as PDF Attachment while saving from VF01/02
Hi,
Can anybody suggest if there is any BADI/User Exit/Configuration exists in order to email Billing document as a PDF attachment while saving from VF01 or VF02?
We need to trigger this while saving the Output type say, VF02 GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the sapscript and an email is sent when an output is issued from VF01/02/03 where as the requirement is to send email whenever the document is saved.
Thanks in Advance,
SrinivasHi,
While saving subroutine FORM_OPEN will get triggerred, and this will be included in the Z Program. If it is not contained in the Z program, include this subroutine. This subroutine will have include RVADOPFO.
The above include will have the function module ADDR_GET_NEXT_COMM_TYPE, and the import parameter LVS_COMM_VALUES will contain the address number and email address to whom the pdf needs to be sent.
So here, i.e. In place of standard include RVADOPFO, put custom include ZRVADOPFO, and modify the code as below.
After the function module ADDR_GET_NEXT_COMM_TYPE, read the email address from any custom table based on the various conditions or hard coded value, then move it to the below variable.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
And remaining functionality will be taken care by the standard code. i.e. converting the spool to PDF and attaching it while sending the email etc....
If I am not wrong, the same functionality will work even while saving the sales order etc..
Regards,
Santu. -
Send e-mail Billing document as PDF Attachment while saving from VF01/02
Hi all,
I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the smartform and an email is sent when an output is issued manually from VF02/03 where as the requirement is to send email whenever the document is saved.
We need to trigger this while saving the Output type say, <b>VF01</b> GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
need ur help on this.
thanks,
Subba.Hello,
Just like you have defined an ouput type for smartforms ,you can define new output type with external email option as medium which will first generate a PDF from invoice data & then send it as email .
I am not sure but you can also try this ::::::
If you have custom-developed smartforms program,then you can add email code at the end of smartform execution by generating PDF, in the same output type instead of creating new.
Thanks. -
How to get List Item attachments name without write any custom code or any database query?
Hi,
How to get List Items attachments name without write any custom code or any database query?You can get it from Rest,
There are 2 options,
1) create a 'Result Source' which has a search query for that List which has attachments
- Use rest query to get the 'Filename' , it will have the attachment file name
For example, if the result source id is : 73e6b573-abf8-4407-9e5f-8a85a4a95159 , then the query will be
http://[site URL]/_api/search/query?querytext='*'&selectproperties='Title,Path,FileExtension,SecondaryFileExtension,Filename'&sourceid='73e6b573-abf8-4407-9e5f-8a85a4a95159'&startrow=0&rowLimit=100
You can refine the query, be giving proper 'querytext'
2) Use the List rest api
For example if your list guid is :38d524a1-e95c-439f-befd-9ede6ecd242e
You can get he attachments for 1st item using this
http://[Site URL]/_api/lists(guid'38d524a1-e95c-439f-befd-9ede6ecd242e')/items(1)/AttachmentFiles
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you. -
Mac Mail to Gmail truncates attachments names and removes exstenstions
I have a user that has mac Mail 2.1.1 and is on OS X 10.4.9. Sometimes when he sends mails to his colleagues, the attachments are truncated and the extensions are removed. For Example:
In Mail, he attaches a file called "Heid Survey.doc". Mail sends the file and the Sent mail looks ok. On a windows machine, using firefox and gmail.com, another person checks the email and gets an attachment named "heid". It does not recognize it as a word file. If the attachment is downloaded and the .doc added to it, it will open. If the same recipient checks the mail message in Mac Mail, the email and attachment come through fine.
I have tried this using both "Send Windows Friendly attachments" and with out it.
This does not always happen he reports, but I was able to recreate it with my gmail account and his laptop consistently. My Mac Mail shows the attachments fine as well.
I also tried to zip the file before sending it to gmail, and gmail recognized that it was a zip file, but when I tried to save it to the desktop on windows, it only saved the truncated version after gmail un-zipped it.
I do not know if this is a Mac Mail or a Gmail issue. I am not sure what is happening to these messages. Can any shed some light or give me some troubleshooting tips? Anything that I can try would be great. Thanks!It has nothing to do with the contains. I believe it's a bug, and if you search translators lists like Systran's, you will discover this issue is spreading virically. Do not know what happens. What is known about this by embattled Mac users who now have to stop using Mail app: the phenomena begins out of the blue, one day works, one do not, it affects every file type (seems to be a problem with the name only, nothing to do with ASCII issues) and also, activating the "windows friendly" part does nothing. My case is really funny because I have one mac account with several mail accounts included, and it began with the main one (the others sent files ok) and now every account is affected. My boss is crazy with this. After a certain amount of time in the gmail account, the names appear fully sometimes, but obviously you can't tell a client, "sorry, you have to wait one day to check your mail, because I'm using Mac and it looks great, but it can't send attchments". Google says it's Apple's error, and Apple do not answer.
-
Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
Cheers, Tom -
How to get the table name and bind columns names in an INSERT statement ?
I have an INSERT statement with input parameters (for example
INSERT INTO my_table VALUES (:a, :a, :a)) and I want to know
without parsing the statement which is the name of table to
insert to and the corresponding columns.
This is needed to generate the SELECT FOR UPDATE statement to
refetch a BLOB before actually writing to it. The code does not
know in advance the schema (generic code).
Thanks in advance,
Joseph CanedoOnce you have prepared your statement, you can execute the
statement with the OCI_DESCRIBE_ONLY mode before binding any
columns. Then you can use OCIParamGet to find out about each
column (column index is 1-based). You should get OCI_NO_DATA or
ORA-24334 if there are no more columns in the statement. Note
that the parameter descriptor from OCIParamGet is
allocated/freed internally by OCI; you do not need to manage it
explicitly. The parameter descriptor is passed to OCIAttrGet in
order to obtain for instance the maximum size of data in the
column OCI_ATTR_DATA_SIZE. You can also get the column name in
this way, although I do not remember the #define off the top of
my head. Getting the table name appears to be much more
difficult; I have never had to do that yet. Good luck. -Ralph -
I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address. Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes
Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder. That is what you need to do if you don't want your site name to be included in yoru url.
It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
It really isn't rocket science! -
Printing name of attachment in e-mail body
I'm looking for a way to print the file name of an attachment that arrives in the Mail app. We can print the attachment and the email but the name of the attachment is not printed.
Hello, and welcome to the Discussions.
Do you mean routinely, or for one special message?
Ernie -
Dynamic name for attachment in the Receiver Mail Communication Channel
Hi All,
I want to dynamically set the name of attachment in receiver mail Communication Channel.
Example: IN__9907211000004_4048454000005_20081211_01000000002643
The first two numbers 9907211000004 & 4048454000005 I want to read it from the message
20081211 this is the date and
And againg this number 01000000002643 is read from message.
What is the procedure to create Adapter Module? I am new to Adapter Module.
Any Ideas ideas?
Thank You,
MukhtarHi Michal,
I had a look to your blog and tried to modify according to my requirement.
Here is the code
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.*;
import com.sap.aii.af.ra.ms.api.*;
@ejbHome <{com.sap.aii.af.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.mp.module.ModuleRemote}>
@stateless
public class SetAttachmentName implements SessionBean, Module{
private SessionContext myContext;
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext context) {
myContext = context;
public void ejbCreate() throws CreateException {
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
throws ModuleException{
try {
Message msg = (Message) moduleData.getPrincipalData();
//creating parsable XML document
InputStream XIStreamData = null;
XMLPayload xmlpayload = msg.getDocument();
XIStreamData = xmlpayload.getInputStream();
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse(XIStreamData);
//finding the tag's name from the Modules tab in the Directory that will hold the attachment's name
String SenderIDTag = null;
SenderIDTag = moduleContext.getContextData("SenderIDTag");
//finding the content of the tag that will be used as the attachment's name (assuming it's the only tag with this name)
Element element = doc.getDocumentElement();
NodeList list = doc.getElementsByTagName(SenderIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
String anIDTag = null;
ReceiverIDTag = moduleContext.getContextData("ReceiverIDTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(ReceiverIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
Date date= new Date(System.currentTimeMillis());
//Add date to the Message
SimpleDateFormat dateFormat= new SimpleDateFormat("yyyyMMdd");
mailFileName += "_" + dateFormat.format(date);
String BillNrTag = null;
BillNrTag = moduleContext.getContextData("BillNrTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(BillNrTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
//creating the attachment
byte by[] = xmlpayload.getText().getBytes();
XMLPayload attachmentXML = msg.createXMLPayload();
attachmentXML.setName(mailFileName);
attachmentXML.setContentType("text/pdf");
attachmentXML.setContent(by);
//adding the message to the attachment
msg.addAttachment(attachmentXML);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
throw new ModuleException(e);
return inputModuleData;
I hope this is right Adapter Module coe for my requirement.
Thank you in Advance,
Mukhtar -
BEx Brodcaster for Workbook - Cannot change the name of attachment file.
Dear All Experts,
I am using the BEx Broadcaster to distribute report of workbook via email. The name of attchament file in email is the technical of workbook. I want change the name of attchment file and found this thread
[Broadcasting Workbook - Change attachment filename|Broadcasting Workbook - Change attachment filename] that reference to method in background process. Can I create customize program or method to change the name of file.
Thank you and really appreciate your help.
Zilla D.Hello Zilla,
By SAP methods, this is not possible. There is no way to do that. May you can suggest it on our Community of Innovation. See note 11.
This is not only your concern. Some customers already request this functionallity.
Best Regards,
Edward John -
Proper syntax of the file name to attach files in FNDATTCH.fmb
Can you please tell me the proper syntax of the file name to attach files in FNDATTCH.fmb ?
i am not able to open attached document if it contains & in the file name..So i wanted to know the rules to give the file nameThis has nothing to do with the TB display. You should repost in the computer forum
Maybe you are looking for
-
What is diff b/w order series and time seriesu2026
what is diff b/w order series and time seriesu2026
-
Dreamweaver CS6 The application was unable to start correctly (0xc000007b).
Hi I have just done a clean install of Windows 8 64BIT on a new SSD, I then installed Dreamweaver CS6 (trial) but when I try to launch it I keep getting the same error: "The application was unable to start correctly (0xc000007b)". I have ran chkdsk a
-
I updated itunes yesterday and then yosemite. Since then my: -itunes wont work, it bounces, opens, then starts thinking then closes. -Mail doesn't work, it can't connect to the server -Safari doesn't work, can't connect to the wifi, but chrome does a
-
How to select data from table having date in timestamp
hi All, I have table and having one field date in type (Timestamp(6)) Date Timestamp(6) I want to select the data from this table for yesterday or current date or someother day Please let me know the query for the same. Regards Kumar
-
Backward compatibility of Captivate 2
If a demo was created in Captivate 2, can it be opened and edited in Captivate 1?