Attachments to be enabled for approver as well.

Hello Colleagues,
As per one of our prospect in India, they would like to have attachment section/block to be enabled for an approver as well.
The scenario goes this way,
Once an employee creates a trip request, it goes to a travel desk (first level of approval). Travel desk would find different quotations and needs to send these quotations along with the trip request to the respective manager (second level of approval). Currently, the approver cannot attach any files and hence, in this case travel desk cannot attach quotations to the trip request and send to the manager for further approval.
Can we enable attachment section for approver as well? Or could there be any work around?
Kindly assist.
Thank You!
Best Regards,
Divya

Dear Divya,
As of now development has no configuration to make the UI editable right now.
I recommend you to place this requirement in Ideaplace.
Thanks & Regards,
Manasa

Similar Messages

Enable the approval workflow for the Sales Orders (Standard)

Dear All,
I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
The version of apps is 11i
many thanks in advance...
Edited by: santark on Oct 27, 2010 3:47 PM

Dear All,
I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
The version of apps is 11i
many thanks in advance...
Edited by: santark on Oct 27, 2010 3:47 PM

Enable decision type 4 for 'Approval with completion' for BUS2121

Hi Experts,
Kindly let me know how to enable decision type 4 for 'Approval with completion' as the system is not allowing to select decision type 4..
I know there is a limitation and allow only 1 & 2 decision types for BUS2121. But, how to enable decision type 4 as I need to enable for parallel approval.
Thanks in advance!
Thanks,
Krishna.

Hello Krishna,
decision type 4 for SC is not allowed for completion process level: this is SAP standard.
1465831 - List of decision types available for SRM documents
Check for below OSS note to allow fields edition:
1277921 - Allow/Disallow to edit fields for approver/reviewer
Regards.
Laurent.

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

Hi All,
Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
Message was edited by: jespada

BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
Legend:
SLFM - Super Low Freq Mode
LFM - Low Freq Mode
HFM GV - High Freq Mode (Geyserville/Speedstep)
HFM - High Freq Mode
Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
Freq VID
SLFM -- --
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
Freq VID
SLFM 798Mhz 0.8750V
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Message was edited by: jespada
Message was edited by: jespada

Can't reliably create a PDF enabled for commenting in Reader

I've hit a brick wall trying to find out why my Acrobat Pro 7.0.8 is broken. As of yesterday, I cannot reliably create a PDF that is enabled for commenting in Reader. I get an error message: "You do not have permission to write to this file." However, this message is halfway false Acrobat does indeed create a PDF where I tell it to. It's just not a reviewable file, which you can tell when you re-open it and see the special dialog box that first pops in front of you, and there's a key/starburst icon in the lower left corner of the Acrobat window. So the resulting output file isn't really enabled, and I've made no progress.
All I know is that before May 1st, this Acrobat Pro feature worked flawlessly every time I used it.
I tested my own file on two other co-workers' PCs and they also cannot save my file as enabled for commenting. One of them has Acro. Pro 7.0.5 and the other one has Pro 7.0.9. Nor can they save other PDF files as enabled for commenting. But creating a short (one-line) PDF from Word or WordPad DOES work, and I can save that file as enabled for commenting.
I tested a few of my existing PDFs: some of them can be output to the reviewable format without any problem, but some of the more recent ones I can't especially if they're larger. Even a Word file as small as 9 pages will not convert. I tried both printing it to the Adobe PDF printer as well as using PDFMaker. Neither one works on this file. But I was able to create reviewable PDFs from simple Word files and some older (April 2008 or earlier) Word files that were longer.
I think some incompatibility happened because of the Windows updates that get silently shoved to our PCs every Tuesday (I work for a large company). But I could be wrong to blame Microsoft.
Would the new Acrobat Pro 7.1.0 update fix this problem?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3948
My system: Windows XP, Svc. Pack 2, Word 2003.

After I removed the comma in the filenames of my problematic test files, this solution worked for me, too. I was able to again save the PDFs as enabled for commenting in Adobe Reader (to make them reviewable).
Thank you, thank you!
This definitely looks like a bug to me, because a comma IS allowed in filenames in both the PC Windows and Mac OS X operating systems.
Andrea

Enabling Journal approval in 11.5.10.2

Hi all,
We have to enable journal approval in Oracle General Ledger on 11.5.10.2 .Can anyone suggest the steps for implementing this process.
Regards,
Sushank Vashishtha

Hi Mujeeb,
To enable Journal approval you need to do the following:
1)In your set of books journal approval should be enabled
2)Define employees(in GL ,in case you are using HRMS you need to define there) and their supervisors
3)Go to Journal Source form and check the box "requires approval"
4)In profile options set "Allow Preparer Approval" to yes
5)In profile options set "Find Approver method" to the appropriate value for your setup
6)Define Authorisation limit in your GL setup
Now Journal approval is ready to be used!!!
Regards,
Sushank

Edit option not enabled for workflow content from within Content Presenter in Webcenter Spaces

I have a webcenter spaces portal page with a content presenter displaying a html page using the default out of the box template. The html page is located in webcenter content / UCM under a folder on which the " All Reviewer" seeded workflow is enabled. The issue i am seeing is when the file is in workflow the edit option is not being enabled even though the reviewer should be able to edit/approve the content in this step. The other functions like workflow approve or reject and switching between workflow version and published version are all enabled. Also when rejected the content does not show edit option from the content presenter (cntrl-C option) for the original author to make any updates.
What would need to be done to enable editing from within the content presenter for workflow content?
Thanks for your help

Hi Sreedhar
We are using WCP 11.1.1.8.5
To recreate the issue
1) Login to WCC Portal: Spaces as admin user , create a New Page under a webcenter spaces portal
2) Under the space , Pages Section , select the page and click edit
3) In Design mode , choose Content Management and Add Document Explorer and Add Content Presenter on the page
4) The Document Explorer will default to the Current Space/portal directory under MyWebcenterSpaces in UCM
5) Create a directory "content" under the Portal space using the document explorer.
6) Right Click on Content folder and choose details. In Details view , go to File->workflow settings and pick a seeded workflow -> MyWCSAllReviewer. Add a user as workflow approver
7) After workflow is enabled on this folder upload a basic html page with simple text into this folder
8) Now in the design mode choose edit in the content presenter and select the "single content view" with default template to display an Image or HTML. Click browse and select the html that was added to workflow
9) Save the Page and view the portal. Workflow should now be enabled for any content changes to that html page.
10) Click Cntrl-shift-c in portal/space as an authenticated user with edit access to content and make an edit to content , this will trigger worklow . The author currently will see edit option get disabled once content enters workflow
11) Login as approver to the portal and cntrl-shift-C to the portal and workflow options(approve and reject) are enabled but the edit option is not. If you reject content , the author should be able to edit content in the content presenter mode, this also is not available. The issue is the content is now no longer available for editing from wthin content presenter if it is in workflow to either the approver or the original author depending on workflow step. If you check the same content under the document explorer the option to edit is enabled. Is this a bug /issue with content Presenter or some option needs enabled?

How to make a row enabled for lead selection and make other Rows disabled?

Hi,
What I require is:
In a webdynpro table , which can have multiple rows, I want to make the rows which are retrieved fom backend as disabled for selection.
And when I add a new row (using an ADD functionality) , this newly added row should only be enabled for lead selection.
The Table property "enabled" can be assigned a context , and can be used to control the disabling of whole table.But then if I add the new row to this table, even this will be disabled.
I can set lead selection to a the new row, but if the whole table is disabled, this won't work.
Please suggest a solution for this.
Thanks,
Richa

Do not set the enabled flag to the whole table but to the editors of each column. Bind the enabled property to a calculated boolean flag in the data source node. In the get method of this flag add a code that will make the editor enabled only if it belongs to the lead selection element.
Now do not allow the selection of rows in the table (there is a property for this, perhaps is named rows selection I don't remember well now), but change the lead selection of the data source node to the desired element when you add the element programatically.
Hope it helps.

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
              ^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
               ^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
                     ^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
                                             ^

Should FTP on the system be ENABLED for SFTP Adapter to work from BPEL Code

Hi,
I am trying to SFTP files from server1 to server2. I am getting the below fault message,
faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Unable to read response. Unable to read response. Unable to read response from host: earth.as.local Please make sure that the ftp server settings are correct and that the ftp server is up. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary> ,detail=<detail>Read timed out</detail> ,code=<code>null</code>}
I have configured FTP Adapter JNDI name and other details correctly,
hostname, username, password, usesftp(true),port(22).
On the server2, the FTP was disabled and was getting the aforesaid error.
But when we enabled FTP on server2, the SFTP started working fine with the same configurations of JNDI.
So, to conclude, Should FTP on the system be ENABLED for SFTP Adapter to work from SOA BPEL Code?
Please give your valuable comments and suggestions.
Thanks & Regards,
Nagaraj Ganapa

Yes, if you are trying to write a file using SFTP/FTP to any machine, a SFTP/FTP server should be running on that machine and there should be a process listening on the correct port(22/21). This is true for any other application as well and not just for Oracle BPEL. You can not send a file to a server using SFTP/FTP when the FTP/SFTP process is not running on that server.

Your Apple ID isn't enabled for iTunes Connect. Learn More

Trying to connect to iTunes connect - Getting this message.
Your Apple ID isn't enabled for iTunes Connect. Learn More
Clicking on the link takes me to the front page of apple support which is not very helpful.
I have an enrolled enterprise Dev account - or at least I think I do as the moneys gone out but apple isn't communicating on the process at all.
ITunes account is verified - twice.
Last Apple Dev took six weeks to get processed - this one is taking at least as long.
Any ideas what next.
NZ Support number asks for an extention and then says beep when you put it in - no go there.
Australian desk is theoretically open but keep getting - this support center is closed messages.
Singapore is a generic help desk - not Apple Dev support.
And now, despite clicking on Dev support it asks me what device I want support for - Well Duh !!! None. Apple Support - oxy moron.

Hey Syed Hassan,
Thanks for the question. iTunes Connect is a service for developers and content providers to manage the content they have offered on the iTunes Store. If this is indeed what you are attempting to do, you’ll want to get started with the online application:
Apple - iTunes - Working with iTunes - Sell Your Content - iTunes Connect
https://www.apple.com/itunes/working-itunes/sell-content/connect/
Otherwise, if you are a consumer that is looking for more information on Game Center, check out this resource:
Using Game Center on your Mac or iOS device - Apple Support
http://support.apple.com/en-us/ht4314
Thanks,
Matt M.

Waiting for approval from other device on mac

Im waiting for the macs keychain access to send approval to one of my other devices for approval after a fresh installation of mavericks 10.9.3,
my question is how long should it take because its been 3 hours so far.
it doesnt appear to be working for me

Hello pj o\'connell,
Thanks for using Apple Support Communities.
Please see below for instructions on troubleshooting this issue of not receiving the verification code:
I'm not receiving the verification code via SMS.
Make sure that you have a good cellular network connection on your phone.
Check that your phone number is one that can receive SMS messages. You can do this by having someone send you a text message.
Check that you have the correct phone number associated with your account:
Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.
Check Apple System Status to see if there is currently a service outage affecting iCloud Keychain.
If you do not have access to a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity for help completing iCloud Keychain setup.
iCloud: Troubleshooting iCloud Keychain
http://support.apple.com/kb/TS4644
Take care,
Alex H.

Document not reported for approval

I have an urgent issue related to workflow, it is like a lot of document that should report for approval, has not been reported since many days. Now when i am checking the log of the documents it is showing a SWW_WI_ERROR_MESSAGE_SEND_S in technical details of the agent list.
Can any one help me for the same?

> And this is the step in WF-Batch.
>
So it is a background step. That is (well, at least it can be) significant information. Have you checked that they haven't messed with the authorizations of WF-BATCH?
> Every document posed after 15 september by a user is having the same problem, workflow is not triggering. And in SM58 it is showing "time limit exceeded".
>
So the documents are of different types, it is not restricted to e.g. only purchase orders. Have you checked that the user has normal authorizations (e.g. the same basic roles as another user)?
I assume you have chekced most of the obvious things, such as the document referred in the workflow actually existing.
Surely the workflow must be triggering when this problem can be found in the workflow log. What exactly do you mean by that statement - do all the workflows fail early in the process - perhaps even before the first step is created?
What should the step that fails do? I assume the failure occurs in a customer-developed BOR object type, so please give a bit more information about where the problem occurs.

Validation at "Save and Send for approval" in Create Expense Report

Hello gurus,
I have an issue where in at Create Expense report we have two options:
1. Save
2. Save and Send for Approval.
When this trip is SAVED and SEND FOR APPROVAL the validation should trigger and error message should appear if expense type XXXX is used in any of the line item of the trip.
I have been told that this can be done by user exit at the backend level. But, at the frontend we will have to make some changes as well.
I know WD JAVA, but a little short on knowledge in WD ABAP.
Could you please help me by telling me as to how to do a validation in this scenario or even if its necessary to do it ?? I mean, is it possible that the backend validation will hold true if someone will create a expense report from the frontend as well ??
Please explain me ...

Hello friend,
Its easy to handle this problem,
To know how you can use the message effectively see this details about the interface,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6c/7aae42cd7fb611e10000000a155106/content.htm
For clear understanding about the steps for creating messages see the code below,
http://e-university.wisdomjobs.com/sap-abap-web-dynpro/chapter-105-274/messages-exceptions-and-web-dynpro-abap.html
I think you will be clear after reading this code. Any queries please revert back to me.
Thanks,
Sri Hari

Attachments to be enabled for approver as well.

Similar Messages

Maybe you are looking for