"attempt to burn disk failed"

Hello,
I have not been able to burn a disk successfully on my imac g5 for what seems forever. I create playlist, burn to disk, insert blank sony cdr, it begins the process, burns the first hand full of songs, then stops burning and I get this error message. "ATTEMPT TO BURN DISK FAILED, UNABLE TO RESET OR RESTART DEVICE" The CD drive makes a really funny noise when it is burning, almost laboring, do you think something is wrong with the burning device>? any recommendations??

Have you tried a different brand of CD media, that can sometimes be the issue rather than the drive.
Good quality media is key.

Similar Messages

Attempt to burn disk failed error 4261

Never had a problem burning disks. Just downloaded a new cd from itunes, and when I try to burn it onto a disk, part way through the burn I get a message "canceling disk burn" then an error message pops on "Attempt to burn disk failed, unknown error 4261". This has happened 4 times, and I am only allowed 7 burns on this new cd.
HELP!!!!!!!!!!!

CD Diagnostics posted below. Please advise. Thanks.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DV051
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), Cdr4_xp (7.0.0.162),
UpperFilters: Cdralw2k (7.0.0.162), pwd_2k (7.0.0.162), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82915G/GV/910GL Express Chipset Family\Intel(R) 82915G/GV/910GL Express Chipset
IDE\DiskST3160828AS____________________________8.03___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________D108___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 11 songs on CD, playing time 64:37 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 05:15:10
Track 3, start time 12:43:37
Track 4, start time 17:42:52
Track 5, start time 26:47:65
Track 6, start time 29:53:15
Track 7, start time 36:04:72
Track 8, start time 41:36:10
Track 9, start time 42:24:25
Track 10, start time 48:12:12
Track 11, start time 53:05:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.

The Attempt to burn disc failed. The burn failed because of a medium write error.

When trying to burn a CD, I'm getting an error that reads:The Attempt to burn disc failed. The burn failed because of a medium write error. I experienced this message before and took my Macbook in to the store and the the genius was stumped but when he tried one of his CD's it burned fine to he concluded that the problem was in the CD's NOT the Macbook or program HOWEVER, months later, I'm having the same issue using the NEW CD's. Does anyone have any information about this?

3 methods to fix this:
The first is to reset pram
at boot up hold four keys down till you hear 3 chimes:
command(apple)=option+p+r
release keys and it will now reboot.
The second is to reset nvram
at boot up hold four keys down:
command(apple)+option+o+f
a black screen will appear
now type: reset-nvram
click enter
now type: reset-all
click enter
it will now reboot
The third is to open system preferences.
go to international
under languages: drag any of the other languages to the top, then drag english back to the top.
make sure "order for sorted lists" is set to english
make sure "word break" is set to english(united states, computer)
then restart.
I hope this helps you as it certainly did me. :^)

I am getting an error every time i try to burn a playlist. The error reads The Attempt to burn disc failed. The burn failed because of a medium write error.

Can somebody help me. I used to be able to burn with no problem. But now while finishing discs, I get the following message.
The Attempt to burn disc failed. The burn failed because of a medium write error.

Try a different brand of discs. Try restarting your computer.

"The attempt to burn disc failed."

Hi,
I have an older MBP, from July of the first year they were sold...2006? Can't remember. Anyway. I am running tiger still and everything is up to date. 10.4.11, iTunes 7.6 etc etc....
Anyway. My problem is, I can't get anything to burn!! Extended hardware test does not reveal any problems...
Here is what is happening..
I want to burn music so that I can play it in my car. I had a stack of 2 year old Sony CD-R's that I was using and they were perfectly, except I ran out of them. So I bought the same exact thing again...and iTunes spits out the cd and says "The attempt to burn disc failed. The burn failed because of a medium write error." Ok so I tried another disc. Same issue. Then I went and took one of my brothers 2 year old Sony CD-Rs and it worked perfectly. So I exchanged my new stack of cds for the same thing, same issue and returned them.
Since then I have burned a couple of movie DVDs on Sony DVD-Rs and they work fine. I have even burned data DVDs on Playo DVD-Rs.
This evening I purchased a stack of HP Music CD-Rs and guess what! My computer spit them out and said the same exact error message!!!
Does anyone have any suggestions?
Is it a Tiger issue?
It can't be hardware related because I have proven it can burn with no problem (just on older cds). Is it maybe a cd issue? Are newer cds somehow formated in a different way that will not work with my combination of hardware and software?
Maybe I should just spend the $300 and get an ipod adapter installed in my car...
Thanks
Adam
Other info...
MATSHITA DVD-R UJ-857:
Firmware Revision: HAEA
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No

Hi ASal,
If your Optical drive is reading correctly then the report suggests that there is already data on that disc and it cannot be written to again. Needless to say, only a CD/RW can be burned to more than once. Your info suggests that it is definitely a CD-R.
Double click your disc mounted on the desktop and see if there is any data on it. If there is then you cannot burn to it again. (Not without burning the data in "Sessions."-- A CD-R can have multiple burns in different sessions, but it cannot write over the top of already existing data. You will need a CD/RW if you wish to be able to completely erase and write again. See how you go. Hope this helps.
It appears that your profiler is well able to SEE the CD-R, but you still might have CD Burn issues. Have you tried just burning data to a CD-R through the Finder to see if burns successfully..? If it does, then you should be able to burn audio through iTunes too. Make sure youre not trying to fit too much data on the disc too. That is a common error with people...
Make sure the discs you are using are completely blank.
Regards,
Ben.

Updated itunes to 12.1 and can't burn playlist. Error "attempt to burn disc failed, disc cannot be read or written to" have tried every troubleshooting solution to no avail. please help!

Updated itunes to 12.1 and can't burn playlist. Error "attempt to burn disc failed, disc cannot be read or written to" have tried every troubleshooting solution to no avail. please help!

Greetings akite2high,
If you are having an issue with being unable to burn a CD using iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
Can't burn a CD in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Attempt to Burn Disc Failed Unknown Error (4450)

Attempt to Burn Disc Failed Unknown Error (4450) this is what i get whenever i try to burn a disc, help?

I've been having the exact same problem and it's really making me angery cause every CD I try and burn ends up with not even a full song on it and the computer ejects it with error4450 popping up on the screen any help would be greatly apreciated

"The Attempt to burn disc failed. The device failed to calibrate the laser

I was trying to burn a cd the other day and it failed and this massage came up.
"The attempt to burn disc failed. The device failed to calibrate the laser power level for this media."
does anyone know how to get rid of this or know how to fix it?

In my experience the problem is random. Sometimes I burn with no problem. This morning my first burn worked fine. Then I had 4 failures in a row. Tried changing nothing. Tried changing burn speed. Tried quitting itunes,etc. Nothing always works so I assume that my manipulations are having no effect even though eventually it works. I am now having a sucessful burn. Thank goodness that it does not ruin the blank but it seems to be increasing in frequency. I used to have the problem once and then could burn 4-5 successfully. Now I've had 3 successes our of 8-9 tries.
Why doesn't apple address this problem? I see hundreds of posts with the same problem. Many are archived. Some like this thread claim to answered. But the problem is that, in my experience, the problem comes and goes. Sometimes I have sucess without changing anything after a failure. Today I quit iTunes and when I started it up again it failed once and now its just finished a sucessful burn. I'm burning the same playlist each time of unprotected music but I notice no difference whether I'm burning purchased music, ripped music, downloaded music, aiff, aac, acc protected, mpeg or a mixture of same.
My sucessful burn was at 6X. Now I'm having a sucessful burn at maximum possible (6X takes too long!). Two in row!
I am using tiger 10.4.5 1 ghz powerpc g4 512 mb ddr sdram with about 10 gigs free on the hard drive it that's of any relevance.
Just realized that if I can count to 30 before the intialization goes to writing it is going to fail. So what? I don't know, can't stand the suspense.

TS1436 The attempt to burn disc failed. An unknown error occured (4310)

Trying to burn audio CD for first time using new acer computer with windows 8, and get the following message:
"The attempt to burn disc failed. An unknown error occured (4310)"

same deal.
acer 4752, windows 8 x64, less than 1 year old.. used to burn CD's ok in iTunes but now gets error 4310.
I tried..
lowering the CD write speed (even down to 1x). --> fail. still 4310. I tested the CDR by burning some random files in windows and it worked fine.
using compatibility mode with windows 7 and windows XP. not only did both not help, but XP mode crashed iTunes. --> fail.
giving up and using windows media player. This worked! resolved, yay..

The attempt to burn disc failed. An unknown error occurred (4310).

This is a fairly brand new Windows 8 laptop with all hardware and most software out of the box. I did have Virtual Clone Drive installed, but I unistalled it to rule it out as a culprit.
Every time I try to burn a disk, it briefly says "Initializing..." then "Cancelling..." then the error in the subject. This happens at every speed (down to 4x), and regardless of audio or MP3 CD option chosen. Below are the diagnostics results.
P.S. I was able to successfully burn an audio CD from Windows Media Player at 24x (I think).
Please help!
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Acer Aspire V5-571P
iTunes 11.1.3.8
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00CXXXXXXXXXX58
Current user is not an administrator.
The current local date and time is 2013-12-29 21:08:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: aa9b92XXXXXXXXXXXXXXXXf7c05d85c
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: UBHelper (2.0.0.14),
UpperFilters: NTIDrvr (1.0.0.10), GEARAspiWDM (2.2.3.0),
D:   HL-DT-ST DVDRAM, Rev
Audio CD in drive.
Found 16 songs on CD, playing time 27:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:44:72
Track 3, start time 02:43:63
Track 4, start time 04:00:68
Track 5, start time 05:39:62
Track 6, start time 08:03:65
Track 7, start time 10:09:68
Track 8, start time 12:29:18
Track 9, start time 14:28:73
Track 10, start time 15:32:42
Track 11, start time 17:16:09
Track 12, start time 18:53:09
Track 13, start time 19:32:32
Track 14, start time 21:22:06
Track 15, start time 23:42:29
Track 16, start time 26:02:18
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   10 16 24.
The drive CDRW speeds are:   10.
The drive DVDR speeds are:   10.
The drive DVDRW speeds are:   10.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVDRAM on CDR media at speed 24X.

This is a fairly brand new Windows 8 laptop with all hardware and most software out of the box. I did have Virtual Clone Drive installed, but I unistalled it to rule it out as a culprit.
Every time I try to burn a disk, it briefly says "Initializing..." then "Cancelling..." then the error in the subject. This happens at every speed (down to 4x), and regardless of audio or MP3 CD option chosen. Below are the diagnostics results.
P.S. I was able to successfully burn an audio CD from Windows Media Player at 24x (I think).
Please help!
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Acer Aspire V5-571P
iTunes 11.1.3.8
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00CXXXXXXXXXX58
Current user is not an administrator.
The current local date and time is 2013-12-29 21:08:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: aa9b92XXXXXXXXXXXXXXXXf7c05d85c
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: UBHelper (2.0.0.14),
UpperFilters: NTIDrvr (1.0.0.10), GEARAspiWDM (2.2.3.0),
D:   HL-DT-ST DVDRAM, Rev
Audio CD in drive.
Found 16 songs on CD, playing time 27:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:44:72
Track 3, start time 02:43:63
Track 4, start time 04:00:68
Track 5, start time 05:39:62
Track 6, start time 08:03:65
Track 7, start time 10:09:68
Track 8, start time 12:29:18
Track 9, start time 14:28:73
Track 10, start time 15:32:42
Track 11, start time 17:16:09
Track 12, start time 18:53:09
Track 13, start time 19:32:32
Track 14, start time 21:22:06
Track 15, start time 23:42:29
Track 16, start time 26:02:18
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   10 16 24.
The drive CDRW speeds are:   10.
The drive DVDR speeds are:   10.
The drive DVDRW speeds are:   10.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVDRAM on CDR media at speed 24X.

The attempt to burn disc failed. An unknown error occurred (4450).

Microsoft Windows XP Professional Service Pack 3 (Build 2600)
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 208CDC9094D8E98D
Current user is an administrator.
The current local date and time is 2010-03-21 19:07:30.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce 8600 GTS
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
I've tried all the fixes I've found... including the one's here. Any advice?

I get the same message but the number is 4000. Ever since I upgraded to iTunes 7.5 I have been unable to burn CDs. Do you have a solution yet?

Attempt to burn disc failed 4251

what is that?

could you post your DVD/CD diagnostics for us Cadolux?
in iTunes, go "help > run diagnostics", select DVD/CD diagnostics, and paste the complete results into a reply.

The attempt to burn a disc failed. The disk is locked and cannot be written

I am having a problem burning CDs. iTunes begins to burn CD than cancels with the following message "The attempt to burn a disc failed. The disk is locked and cannot be written." After some research I found the following article "Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error." I followed directions as noted, this worked for the burning of one CD, then failed message returned. I have tried different CDs and lowering record speed to no avail. Burner worked up until updating to latest iTunes. Here is the diagnostic report
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Sony Corporation PCG-GRT390ZP(UC)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce FX Go5600 (Sony)\GeForce FX Go5600
IDE\DiskIC25N060ATMR04-0______________________MO3OAD1A, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskLexar__JumpDrive______1.00, Bus Type USB
USBSTOR\DiskSony___MSC-U04________3.00, Bus Type USB
IDE\CdRomSONYCD-RW__CRX830E_____________________JFK1___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: SONY CD-RW CRX830E, Rev JFK1
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4 0 0 0 0 0 0 0.
The last failed audio CD burn had error code -46(0xffffffd2). It happened on drive E: SONY CD-RW CRX830E on CDRW media at speed 4X.
Any help would be appreciated.
Sony Vaio Windows XP

hmmmm. i see that there's a chipset driver revision listed on the drivers and downloads page for your M520:
Gateway M520 > Windows XP
are your chipset drivers currently up to date?

The attempt to burn a disk failed. An unknown error occurred (4000).

Whenever I try to burn a CD from iTunes, the burning process starts and continues for about two minutes, cancels automatically and then displays the following statement: "The attempt to burn a disk failed. An unknown error occurred (4000)."
Several Apple technicians have tried but been unable to assist me. They have pointed me to articles at http://docs.info.apple.com/article.html?artnum=93360 and http://docs.info.apple.com/article.html?artnum=93286 but none of the suggested solutions solve the problem.
1. I have the most recent version of iTunes (6.0.1).
2. All of the songs that I am trying to burn are authorized. For example, they include the Complete U2 Collection, which I recently downloaded from the iTunes Music Store.
3. I am not trying to burn a CD with the same Playlist more than seven times.
4. My CD burner works perfectly fine using other CD burning software, such as Windows Media Player or Roxio Easy Media Creator. However, these programs are not compatible with any of the many pieces of music that I have purchased and downloaded from the iTunes Music Store.
My hardware configuration is as follows:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 PJ467AA-ABA M1180N
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Iviaspi (1.0.0.0), Pfc (2.5.0.204), Cdr4_xp (7.5.0.47),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.47), pwd_2k (7.5.0.47),
Video Driver: RADEON X300 Series\RADEON X300 Series
Found aspi32 running.
Does anyone have any suggestions as to how I can restore my ability to burn CDs from iTunes? Thank you very much!

I am having the same problem. I get an error 4450 - unknown. I have purchased several songs but it appears I will not be able to burn them to CD.

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

"attempt to burn disk failed"

Similar Messages

Maybe you are looking for