Attempt to locate which DIMM is bad

I've been reading tons today trying to identify which pair of DIMMs contain the bad bits. Unfortunatly, the messages are not terribly legible. Here's the uname and message dump:
SunOS 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-V240
Feb 27 05:25:08 unix: [ID 321153 kern.notice] NOTICE: Scheduling clearing of error on page 0x00000002.0760e000
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 127435 kern.info] [AFT3] errID 0x00089fc9.ee53b75c Above Error detected by protected Kernel code
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 901215 kern.warning] WARNING: [AFT1] Uncorrectable memory (FRU) Event detected by CPU0 at TL=0, errID 0x00089fc9.ee54425c
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 470563 kern.notice] [AFT1] errID 0x00089fc9.ee54425c More than four Bits were in error
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 938397 kern.info] NOTICE: [AFT0] Corrected remote memory/cache (RCE) Event detected by CPU1 at TL=0, errID 0x00089fc9.ee53b75c
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 529959 kern.info] NOTICE: [AFT0] Corrected memory (FRC) Event detected by CPU0 at TL=0, errID 0x00089fc9.ee54633c
Feb 27 05:25:08 SUNW,UltraSPARC-IIIi: [ID 387639 kern.info] [AFT0] errID 0x00089fc9.ee54633c Data Bit 79 was in error and corrected
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 688270 kern.info] NOTICE: [AFT0] Corrected memory (CE) Event detected by CPU0 at TL=0, errID 0x0008c713.d9b49d5e
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 196078 kern.info] [AFT0] errID 0x0008c713.d9b49d5e Corrected Memory Error on is Persistent
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 238949 kern.info] [AFT0] errID 0x0008c713.d9b49d5e Data Bit 79 was in error and corrected
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 255204 kern.info] [AFT2] errID 0x0008c713.d9b49d5e E$tag PA=0x00000003.2ca8f580 does not match AFAR=0x00000002.0760f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 219024 kern.info] [AFT2] errID 0x0008c713.d9b49d5e PA=0x00000003.2ca8f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00200043.00590043 0x004c0045.002d0054 ECC 0x140
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x004f002d.00440041 0x00540045.0020004d ECC 0x042
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00450052.00430048 0x0041004e.00440049 ECC 0x096
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00530045.00200049 0x00540045.004d0020 ECC 0x1f7
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 255204 kern.info] [AFT2] errID 0x0008c713.d9b49d5e E$tag PA=0x00000002.29f4f580 does not match AFAR=0x00000002.0760f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 219024 kern.info] [AFT2] errID 0x0008c713.d9b49d5e PA=0x00000002.29f4f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.b0100008 0x104fffe0.01000000 ECC 0x17d
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x90100019.b6100011 0x104fff94.01000000 ECC 0x0a0
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0xb2100001.82100011 0x94100017.a0100008 ECC 0x118
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0xa4100004.a2100005 0xa6100003.ac10000a ECC 0x106
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 255204 kern.info] [AFT2] errID 0x0008c713.d9b49d5e E$tag PA=0x00000002.2394f580 does not match AFAR=0x00000002.0760f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 219024 kern.info] [AFT2] errID 0x0008c713.d9b49d5e PA=0x00000002.2394f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 255204 kern.info] [AFT2] errID 0x0008c713.d9b49d5e E$tag PA=0x00000013.13e4f580 does not match AFAR=0x00000002.0760f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 219024 kern.info] [AFT2] errID 0x0008c713.d9b49d5e PA=0x00000013.13e4f580
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 929717 kern.info] [AFT2] D$ data not available
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 335345 kern.info] [AFT2] I$ data not available
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 181299 kern.warning] WARNING: [AFT1] Uncorrectable memory (UE) Event detected by CPU0 Privileged Data Access at TL=0, errID 0x0008c713.d9c1047f
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 520596 kern.notice] [AFT1] errID 0x0008c713.d9c1047f More than four Bits were in error
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 737218 kern.info] [AFT2] errID 0x0008c713.d9c1047f E$tag PA=0x00000013.13e4f640 does not match AFAR=0x00000002.0760f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 182908 kern.info] [AFT2] errID 0x0008c713.d9c1047f PA=0x00000013.13e4f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000003.d7717650 0xd77176e0.d7717730 ECC 0x11d
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000001.f4046530 0x00000020.f435b008 ECC 0x1e4
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0xf4359f58.f435a888 0xf435a7c0.f40131a0 ECC 0x00d
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0xf400e4f0.f400d970 0xf499f2c0.f498edd8 ECC 0x039
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 737218 kern.info] [AFT2] errID 0x0008c713.d9c1047f E$tag PA=0x00000002.29f4f640 does not match AFAR=0x00000002.0760f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 182908 kern.info] [AFT2] errID 0x0008c713.d9c1047f PA=0x00000002.29f4f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x7ff8adf0.01000000 0x00000000.90103ff9 ECC 0x13a
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0xa210001b.7ff8adeb 0x01000000.00000000 ECC 0x050
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x104fffa7.b0102001 0xb0100008.104fffa7 ECC 0x1ed
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x01000000.90103ff9 0x7ff8ade2.01000000 ECC 0x0f9
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 737218 kern.info] [AFT2] errID 0x0008c713.d9c1047f E$tag PA=0x00000003.2ca8f640 does not match AFAR=0x00000002.0760f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 182908 kern.info] [AFT2] errID 0x0008c713.d9c1047f PA=0x00000003.2ca8f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00200043.00590043 0x004c0045.002d0054 ECC 0x140
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x004f002d.00440041 0x00540045.0020004f ECC 0x165
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00560045.0052004c 0x0049004d.00490054 ECC 0x047
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00200046.00450045 0x00530000.00000000 ECC 0x044
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 737218 kern.info] [AFT2] errID 0x0008c713.d9c1047f E$tag PA=0x00000013.1998f640 does not match AFAR=0x00000002.0760f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 182908 kern.info] [AFT2] errID 0x0008c713.d9c1047f PA=0x00000013.1998f640
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0xffffffff.ffffffff 0x00000000.474d5400 ECC 0x085
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x43445400.00000000 0x00005460.00004650 ECC 0x090
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000001.00888308 0xfe03f650.00000000 ECC 0x06f
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00004d58 0x00000000.00000000 ECC 0x147
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 929717 kern.info] [AFT2] D$ data not available
Feb 27 17:25:07 unix: [ID 321153 kern.notice] NOTICE: Scheduling clearing of error on page 0x00000002.0760e000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 970695 kern.info] [AFT3] errID 0x0008c713.d9c1047f Above Error detected by protected Kernel code
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 541374 kern.warning] WARNING: [AFT1] Uncorrectable memory (UE) Event detected by CPU0 Privileged Data Access at TL=0, errID 0x0008c713.da17741a
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 901406 kern.notice] [AFT1] errID 0x0008c713.da17741a More than four Bits were in error
Feb 27 17:25:07 unix: [ID 321153 kern.notice] NOTICE: Scheduling clearing of error on page 0x00000002.0760e000
Feb 27 17:25:07 SUNW,UltraSPARC-IIIi: [ID 767297 kern.info] [AFT3] errID 0x0008c713.da17741a Above Error detected by protected Kernel code
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 263992 kern.info] NOTICE: [AFT0] Corrected memory (FRC) Event detected by CPU0 at TL=0, errID 0x0008ee5e.3e15af1a
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 545619 kern.info] [AFT0] errID 0x0008ee5e.3e15af1a Data Bit 76 was in error and corrected
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 806120 kern.info] NOTICE: [AFT0] Corrected remote memory/cache (RCE) Event detected by CPU1 at TL=0, errID 0x0008ee5e.3e1634e4
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 666021 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 E$tag PA=0x00000000.14bcf400 does not match AFAR=0x00000002.0760f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 212348 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 PA=0x00000000.14bcf400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x4134da4e.000946c2 0x00010000.00000000 ECC 0x004
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000009.1465517b ECC 0x016
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.0000000c 0x00000000.00000000 ECC 0x00a
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00251f98.00000008 ECC 0x158
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 666021 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 E$tag PA=0x00000013.3fa8f400 does not match AFAR=0x00000002.0760f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 212348 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 PA=0x00000013.3fa8f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x92102001.81c7e008 0x91e83fff.d2592030 ECC 0x153
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x9fc24000.01000000 0xb0100008.913e6000 ECC 0x011
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x7ffc95ee.92102001 0x81c7e008.81e80000 ECC 0x152
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x9de3bf00.c0762050 0xc0762058.c0762090 ECC 0x1f1
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 666021 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 E$tag PA=0x00000002.1634f400 does not match AFAR=0x00000002.0760f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 212348 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 PA=0x00000002.1634f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00010000.00000000 0x00000000.00000000 ECC 0x0a4
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000026.02ed5217 0x00000000.0000000b ECC 0x1f7
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x005aaca0.00000026 0x00000000.00000000 ECC 0x122
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 666021 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 E$tag PA=0x00000013.3818f400 does not match AFAR=0x00000002.0760f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 212348 kern.info] [AFT2] errID 0x0008ee5e.3e1634e4 PA=0x00000013.3818f400
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x40000000.fffffdfc 0x80000013.2967c4b0 ECC 0x0f3
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x090603ff.fffffdf3 0x87000003.116026b2 ECC 0x183
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x40000000.000003a6 0x81000013.1aeda6b2 ECC 0x0a8
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x40000000.fffffdfc 0x83000013.296824b0 ECC 0x11b
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 929717 kern.info] [AFT2] D$ data not available
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 335345 kern.info] [AFT2] I$ data not available
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 675072 kern.warning] WARNING: [AFT1] Uncorrectable memory (FRU) Event detected by CPU0 at TL=0, errID 0x0008ee5e.3e237525
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 731414 kern.notice] [AFT1] errID 0x0008ee5e.3e237525 More than four Bits were in error
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 164577 kern.warning] WARNING: [AFT1] Uncorrectable remote memory/cache (RUE) Event detected by CPU1 Privileged Data Access at TL=0, errID 0x0008ee5e.3e2378ba
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 373169 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba E$tag PA=0x00000013.0808f640 does not match AFAR=0x00000002.0760f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 888466 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba PA=0x00000013.0808f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 373169 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba E$tag PA=0x00000013.00b0f640 does not match AFAR=0x00000002.0760f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 888466 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba PA=0x00000013.00b0f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0xfd9c37fc.fd9b287c 0xfd6a3380.fd989b50 ECC 0x0ac
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0xfd9ac118.fd98fe70 0xfd9b8da8.fd9c2ca8 ECC 0x192
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0xfd9af0d0.fd979380 0xfd679088.fd9bbbe4 ECC 0x0f4
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0xfd9b1ca0.fd9a5c20 0xfd60b120.fd9c3820 ECC 0x1b0
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 373169 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba E$tag PA=0x00000013.3d80f640 does not match AFAR=0x00000002.0760f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 888466 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba PA=0x00000013.3d80f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x40000000.000c4407 0x84000000.2a6e47b6 ECC 0x142
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x40000000.000c4407 0x85000000.11ee67b6 ECC 0x1e8
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x40000000.000c3c07 0x86000002.206e87b6 ECC 0x0ad
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.000a8407 0x87000012.0caea636 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 373169 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba E$tag PA=0x00000012.2400f640 does not match AFAR=0x00000002.0760f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 888466 kern.info] [AFT2] errID 0x0008ee5e.3e2378ba PA=0x00000012.2400f640
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.78335680 0x00000300.0f7b5398 ECC 0x0f5
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000300.332b7550 ECC 0x1d8
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 929717 kern.info] [AFT2] D$ data not available
Feb 28 05:25:07 unix: [ID 321153 kern.notice] NOTICE: Scheduling clearing of error on page 0x00000002.0760e000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 385988 kern.info] [AFT3] errID 0x0008ee5e.3e2378ba Above Error detected by protected Kernel code
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 501753 kern.info] NOTICE: [AFT0] Corrected memory (FRC) Event detected by CPU0 at TL=0, errID 0x0008ee5e.3e237525
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 339710 kern.info] NOTICE: [AFT0] Corrected remote memory/cache (RCE) Event detected by CPU1 at TL=0, errID 0x0008ee5e.3e2378ba
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 190037 kern.warning] WARNING: [AFT1] Uncorrectable remote memory/cache (RUE) Event detected by CPU1 Privileged Data Access at TL=0, errID 0x0008ee5e.3ea3b5d4
Feb 28 05:25:07 unix: [ID 321153 kern.notice] NOTICE: Scheduling clearing of error on page 0x00000002.0760e000
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 896518 kern.info] [AFT3] errID 0x0008ee5e.3ea3b5d4 Above Error detected by protected Kernel code
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 692672 kern.warning] WARNING: [AFT1] Uncorrectable memory (FRU) Event detected by CPU0 at TL=0, errID 0x0008ee5e.3ea44c38
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 551470 kern.notice] [AFT1] errID 0x0008ee5e.3ea44c38 More than four Bits were in error
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 716248 kern.info] NOTICE: [AFT0] Corrected remote memory/cache (RCE) Event detected by CPU1 at TL=0, errID 0x0008ee5e.3ea3b5d4
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 108747 kern.info] NOTICE: [AFT0] Corrected memory (FRC) Event detected by CPU0 at TL=0, errID 0x0008ee5e.3ea46b25
Feb 28 05:25:07 SUNW,UltraSPARC-IIIi: [ID 250707 kern.info] [AFT0] errID 0x0008ee5e.3ea46b25 Data Bit 76 was in error and corrected
Can anyone let me know which one seems to be the culprit?

I actually suspect it's an ecache issue with cpu0.
Your Solaris kernel patch level is so far down-rev (from 2004) that the OE can't retire the cache page properly, thus the log entries.
These log entries == "Hey, there's an issue and I'm unable to fix it for you."
Also, notice the every-twelve-hour timestamps?
That's cache scrubbing.
The UE's are noted for cpu0 and are REMOTE to cpu1.
Ecache uses an ECC design, just as RAM uses an ECC design.
Glance at Spectrum Infodoc 76028 for a description how your system is down by more than 25 kernel patch revs.
I think you'll need to open a service case with Sun techsupport.
Have an Explorer available when you do.

Similar Messages

Getting message Attempt to determine which Adapter Engines......

Hello All
1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
Updating SOAP Adapter (Sender channel).
Refreshed all caches...
2. Also while testing using SOAP Test client getting response
HTTP/1.1 500 Internal Server Error
connection: close
set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
server: SAP J2EE Engine/6.40
content-type: text/xml; charset=utf-8
any idea?
Thanks in advance

Hi Naveen
Thanks for your reply...
Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
I was getting the error because of wrong namespace in channel (Case sensitive).
So i updated this name space and after activation i am getting above message while testing.
Regards

My iTunes says there are 17 songs it cannot locate. How do I locate which songs these are without clicking on each song in my whole library?

My iTunes says there are 17 songs it cannot locate. How do I locate which songs these are without clicking on each song in my whole library?

To locate all of the broken links in your library try:
Lost & Found Playlists
Create a regular playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. They can be deleted with Ctrl+A to select them and then Shift+Delete to discard them.
The exercise can be repeated with different media sources if needed.
Or try iTunes Folder Watch with its option to check for dead tracks on startup.
tt2

Can In Design CS 5.5 locate which page uses a particular color swatch?

In Design has powerful search abilities. It can even find where a STYLE is used inside a document with many pages/
Can In Design CS 5.5 locate which page uses a particular color swatch?

Maybe. Try Find/Change, Object tab, or look at the Blatner Tools plugin

When i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

when i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

Which User Exit / BADI I can use?

Hello All,
While Saving PO or PR I need to check the value of commitment Item(FIPOS).
Which User Exit / BADI I can use?
Regards,
Lijo John

try this method;
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
when u run the po transaction it will repeatedly stop at the breakpoint check the value of exit name there press f8 to continue now when u just save the po then check the values of exitname in the debugger

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7. I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it. Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message. Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
I've also done a factory restore followed by a restore from backup and have the same problem.

I just got a retro clock from brookstone and in setting it up it asked if I want to use current location which is incorrectly "Buffalo" but I do not know how to change it. Can anyone help me find where to change location?

I just got a retro clock from brookstone and in setting it up it asked if I want to use current location which is incorrectly "Buffalo" but I do not know how to change it. Can anyone help me find where to change location?

As I understand it, Apple gets your location from the wi-fi router to which your iPod is connected. Location Services identifies the router and then checks for its location in Apple's database. If the router has been recently relocated or if there is a glitch in Apple's database, you will get an incorrect location. I don't think that there is anything you can do about it. You could send Apple a message about the error, but I doubt if they would do anything about it.

I am attempting to locate a converter....I need help

I am attempting to locate a converter / adapter from (female) Lightning to Mini Usb (samsung Galaxy S3) - (MALE). Ive spent countless hours looking for it, but my technical level of expertise was surpassed when I turned on the item. Help a guy out.....

PDF might not be the best format for control over the size in html signature file
http://matt.coneybeare.me/how-to-make-an-html-signature-in-apple-mail-for-maveri cks-os-x-10-dot-9/

How do I know which bank my bad DIMM is in?

I've run the AHT and it identified a bad DIMM, which I can return to the vendor for replacement. I'm just not sure which of the 2 DIMMS to send them. Here's what the AHT said:
2mem/1/4:DIMM2/J13
Can anyone tell me if this DIMM is in the top bank or the bottom bank?
Thanks!

Hello! It's saying the bad one is located in J13. Look closely at the motherboard at the end of the ram slots and you should see the labeling. Tom

How to Determine which DIMM to Replace Given Kernel Panic Report

I have a dual cpu, mid-2010 Mac Pro with 32GB of Kingston RAM (8 4gb modules). Once a week or so, it suffers a kernel panic that appears to be caused by a RAM problem. Here is a typical one:
Mon Jul 18 10:01:26 2011
Machine-check capabilities (cpu 17) 0x0000000000001c09:
family: 6 model: 44 stepping: 2 microcode: 15
Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 1 logged:
IA32_MC8_STATUS(0x421): 0xfe0000800001009f valid
Channel number:         15 (unknown)
Memory Operation:       read
Machine-specific error: Read ECC
COR_ERR_CNT:            4
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
   Error overflow
IA32_MC8_ADDR(0x422): 0x0000000408aa4340
IA32_MC8_MISC(0x423): 0x29d7aef000040383
DIMM:     0
Channel: 1
Syndrome: 0x29d7aef0
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
They all point to DIMM 0, Channel 1, and indicate addresses like 0x00000004xxxxxxxx. My question is: If I am interested in replacing the suspect DIMM, which one is it?
In the User Guide, it indicates I have 8 memory slots, organized in two chunks, each chunk adjacent to a cpu. The diagram says that Slots 1-4 are adjacent to one CPU, and Slots 5-8 are adjacent to the other. I, of course, filled all of them myself. System Profiler tells me about DIMMs 1-8. The kernel panic report seems to tell me that DIMM 0 is to blame, perhaps DIMM 0 in Channel 1. Here is a representation of the slot layout in the User Guide:
slot 5        CPU
slot 6        slot 4
slot 7        slot 3
slot 8        slot 2
CPU         slot 1
latch         latch
where the bottom of the diagram is toward the side of the tray that has the latches that release the tray. The form of answer I'd like to see is something like: Replace the DIMM in Slot 1. Or perhaps: Replace the DIMMs in slot 1 and slot 5.

Perhaps I wasn't clear. The Genius *did* look it up - it took him about 5 actual minutes - and he said that all he could tell was that it was a memory error of some sort. I was asking him specifically what the 4 and 66 meant as well as the hex number. And with a ton of google I was unable find much about it.
I know quite a lot about how to eventually find the bad DIMM, if there is one. The machine in question is used heavily for Photoshop, InDesign, audio editing, some video editing, and programming, and if the memory failures (or memory controller errors) were more frequent, I would engage in classical isolation techniques - and I probably will have to. It simply seemed to me that the information I need is in the kernel panic logs.

TO Find out which DIMM is faulty in server.

SIR/mam,
we have V480 server at our Data Center.AND it shows only 6GB out of 8GB RAM in printdiag command.Now is there any command by which we can identify particular DIMM NO which got faulty?
Please reply .its urgent for me.

Is this question related in any way to your other (very recent) forum posts about RAM?
Re: Soft errors.
Re: DIMM Memory module related problem
Review the contents of your /var/adm/messages file for any errors at each bootup timestamp.
If there are entries, you will see them specify the individual cpu/memory boards as well as the specific DIMM slots. If the fault has existed for some time before you noticed it, you may need to go through older files as well (messages.0, messages.1, messages.2, etc).
If you cannot find any information that way, you will need to schedule a maintenance window, bring the system down to the OK prompt and then reboot it through a diagnostic POST. Keep in mind that a proper fully diagnostic POST on a V480 can easily take 30 minutes or more.
Once you have narrowed it down, you can power the system down and reseat the questionable memory modules. A normal POST after that will tell you whether all the RAM is working again.
When all else fails, you can grab your service contract number and open a SR to Oracle support.
That should have been your first action when you noticed this, not post a forum question.
Advice:
user8694422 wrote:
Please reply .its urgent for me.Your urgency is your problem not anyone else's.
These forums are NOT technical support.
Oracle employees are not expected to read anything posted here.
There is no obligation for ANY question to ever get an answer.

Have recently acquired an additional black MacBook, and installed Snow Leopard onto it. Trying to get it to connect via a plug-in USB wifi unit (poor reception on Airport) I have an extra Network Location which does not work. How can I remove it?

Need to get a second hand black MacBook connected. Poor reception on Airport so tried a plug in wifi aerial. That didn't work, but now have a Network Location I can't get rid of. How do I remove it ?

Hello my ginger,
I tried what you suggested - but to no success. The problem came up when I was re-entering the new settings. If I left it as using DHCP it would run for a few seconds with no IP address, then drop in a 169.254 one which would not connect through. To overcome this I tried using the 'Using DHCP with manual address' option and entered in an address which it had set up from the clone boot. This appeared to be okay. When I then tried renewing DHCP lease sometimes that address held. When I tried connecting though - no sight of the internet, and the exclamation mark was across the wifi icon in the menu bar. If I switched it to Using DHCP it would randomly fall back to the 169.254 address.
The only significant differences I could see when cross checking all the settings info was in the WINS panel the NetBIOS had a slightly different configuration of the name - but as they ended in the same numbers I assumed they were the same. And, when looking under Keychain Access, in the System section list (it also appeared in the login section) additional info box they had different locations - 28 characters in four groups. I don't have a clue what this refers to. Also the allow access list in the boot clone included System Preferences, but did not in the Snow Leopard boot, so I added it in. With no success.
I am so frustrated I am thinking of giving up. I seen have loads of postings on the net about a variety of problems with wifi connection on Snow Leopard. I have version 10.6.3. Did it get any better in later Snow Leopard ? Or in any of the OS s after that ? It was always so easy and so solid under Leopard - why the h**l did they change it ?

Which method for badi WORKORDER_UPDATE

i need to trigger error message if user enter a specific qty at CJ20N, activity level,
in which method shall i use, i tried BEFORE_UPDATE method, but it triggers short dump, AT_SAVE method only enables at header level, is there any way i can trigger the error msg ? pls adivce

I checked the documentation for this BADI which says-
"Note that no system messages may be sent in the methods. The only exception is the AT_SAVE method. Within this method, a system message may be issued, but only if you trigger the exception ERROR_WITH_MESSAGE at the same time."
So , It doesnt seem to be possible for any other method as per the documentation.
Cheers,
Disha

Attempt to locate which DIMM is bad

Similar Messages

Maybe you are looking for