Attempt to reinstall PSE 11 stalled by problems with Shared Technologies

I am attempting to reinstall my copy of PSE 11. I get about half-way through the installation and I get a popup that says:
The installation process has encountered an error while installing Shared Technologies.
Please restart your system and try again.
It has happened twice. What is Shared Technologies and why isn't it working?
I'm using Win7.
John in Houston

Please uninstall all instances (any residue left) of PSE first using CS Cleaner tool (http://www.adobe.com/support/contact/cscleanertool.html)
Then restart your machine and try installing afresh. You should ideally not see this issue again.
Thanks
Andaleeb

Similar Messages

Installing PSE12 encounters problem with Shared Technologies

Can you help me
I can't install PSE12 on my computer (Windows 7) : installing stops with a message about a problem with installing Shared Technologies
I don't know what is Shared Technologies. Is it downloaded with PSE 12?
Thanks

Hi,
Could you please share the logs from the location(s) mentioned below:
%temp%\PREInstall.log, PRE11.log,
PDApp.log,
amt.log,
C:\Program Files\Common Files\Adobe\Installers\<*PRE11*>.log.gz
I'd be able to comment & suggest better once I have the logs but meanwhile, you might like to upgrade the Adobe Application Manager from the following location just to rule out any incompatibilities or upgrade failures of AAM:
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Thanks.

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD under iMac 1TB Seagate Hard Drive Replacement Program.
Would appreciate any help navigating the installation failure message. THANKS!

Thanks for your response! Here's the error message -
"The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

Premiere Elements 11 gives error "encountered a problem installing shared technologies" and does not install.

I have Photoshop Elements 11 installed but Premiere Elements will not install due to the problem installing shared technologies. I would appreciate any suggestions as to how to fix the issue. I tried the installation several times.

205EdMLewis
On what computer operating system is your Premiere Elements 11 running on? For now I will assume Windows 7, 8, or 8.1 64 bit. Are you installing the program from
an installation disc or from installation files?
The Shared Technologies error is an old story that afflicts several versions of Premiere Elements on several different computer operating systems. My encounters with this error
have been using installation disc for the program involved.
There are numerous home remedies. The one that has been working for me lately and consistently has been the disabling of the OOBE Folder which is found
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder is the OOBE which you disable by changing the folder name from OOBE to OLDOOBE.
Please let us know if that worked for you.
Do not give up.
ATR

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problem with shared objects synchoronization.

I encountered a small problem with shared objects.
I'm working on a program that creates chat rooms of a fixed
size of 30 users. When the 31th user comes, a new room is created.
The idea is that the client first connects to the first room
and checks if it's full by connecting to shared objects. If it is
full, connection is closed and process is reapeated on a new
instance of the application.
I use a function to connect to an instance, which takes as a
parameter a number (1 for instance room_1, 2 for room_2, etc). The
function itself creates the necessary Netconnection and
sharedObject objects.
If a room is full, Netconnections and sharedObjects are
closed and function is called again with another number.
I have no problem for connecting to the first room, but after
closing the first connection and connecting to the new room, there
seem to be some problems with the shared objects (especially,
OnSync doesn't seem to execute again after the connection to the
shared objects of the new instance).
I was wondering if you had any ideas what could cause this.
Is it the use of the same variable names for connecting at two
different shared objects?
Here is the function :
function initStreams(room) {
client_nc = new NetConnection();
client_nc.connect("rtmp://192.168.0.4/Elearning/room_"+room);
in_ns = new NetStream(client_nc);
in_ns2 = new NetStream(client_nc);
Replay_video.attachVideo(in_ns);
out_ns = new NetStream(client_nc);
out_ns2 = new NetStream(client_nc);
in_ns.play("my_recorded_stream");
users_name = SharedObject.getRemote("users_name",
_root.client_nc.uri, false);
users_name.connect(_root.client_nc);
users_language = SharedObject.getRemote("users_language",
_root.client_nc.uri, false);
users_language.connect(_root.client_nc);
users_picture = SharedObject.getRemote("users_picture",
_root.client_nc.uri, false);
users_picture.connect(_root.client_nc);
users_finger = SharedObject.getRemote("users_finger",
_root.client_nc.uri, false);
users_finger.connect(_root.client_nc);
I you need more info, I can post more of the code on the
forum.
Any help would be really appreciated

I don't see any onStatus events in the code you posted above.
If you're defining the onstatus event outside the function, that's
the problem. When you define the shared object, you also need to
define it's onStatus event handler.
Also, you really should wait for the onStatus event of the
netConnection before you connect your sharedObjects. If you try to
connect the SO before the netConnection is established, the SO will
never connect.

WIN/Vista, PSE 7.0: Organizer problems with dates

Im working with our scanned photos now, so there is no EXIF data and the only dates are the scanned date and any later corrections in Photoshop CS3 before or after importing into PSE 7.0. I now have two date related problems that I didnt have with PE 5.0.
1) In the Organizer view, when I right click on the date to bring up the Adjust Date and Time screen, then click on Change to a specified date and time and click OK the day automatically changes to a day earlier, which has caused much confusion since all I am wanting to do is set a time to sequence photos from multiple cameras. How do I keep it from automatically changing the date?
2) Also, Ive had multiple times that Ive changed the date on a couple of photos and PSE 7 will place them incorrectly so that they are non-chronological. Specifically I now have two photos from a string of many on Dec 24 & 25, and some on Dec 26 and after. These two photos belong on Dec 26 chronologically, as well as where they fit in my file naming system. If I change the date on these to 12/26/1976, though, they are placed in my 12/25/1976 photos, not 12/26 where they should be. I have another photo dated 1/17/1977 that PSE has placed between 1/16 and 1/9/1977.
I thought these were quirky enough that I actually removed and reinstalled PSE 7.0, but these issues are unchanged.
FYI: Settings in Edit>Preferences:
General/Display Options/Date (Newest First): Show Newest First within Each Day is selected
Files/File Options: Use Last Modified Date if EXIF . . . is unchecked.

> In the Organizer view, when I right click on the date to bring up the "Adjust Date and Time" screen, then click on "Change to a specified date and time" and click "OK" the day automatically changes to a day earlier, which has caused much confusion since all I am wanting to do is set a time to sequence photos from multiple cameras. How do I keep it from automatically changing the date?
When a photo has a date but unknown time, PSE 6 and 7 (and perhaps 5 too) behave this way. Its a bug thats been reported to Adobe.
> 2) Also, I've had multiple times that I've changed the date on a couple of photos and PSE 7 will place them incorrectly so that they are non-chronological. Specifically I now have two photos from a string of many on Dec 24 & 25, and some on Dec 26 and after. These two photos belong on Dec 26 chronologically, as well as where they fit in my file naming system. If I change the date on these to 12/26/1976, though, they are placed in my 12/25/1976 photos, not 12/26 where they should be. I have another photo dated 1/17/1977 that PSE has placed between 1/16 and 1/9/1977.
When this happens, which view are you in? Display > Thumbnail View or Display > Folder Location view? Is this using Smart Albums to search by date? If this is still happening, can you upload a screen shot, the incorrect 12/26/1976 photo, and the adjacent 12/25/1976 photo? You can post these for free at www.pixentral.com. Ill take a look at their metadata.
There are a number of problems with time unknown, so Ive stopped using it:
http://www.adobeforums.com/webx?128@@.59b6aaa0
In particular:
- Search with date ranges doesnt properly handle time unknown.
- Other tools, such as Vista Explorer, dont correctly handle dates with time unknown in metadata written by PSE.
- If you have a series of slides youve scanned, you know their relative time ordering (due to the slide numbering) but not their absolute time. Theres no convenient way of preserving that ordering within PSE thumbnail view if you use time unknown.
So instead of unknown, I assign the times 12:00 AM, 12:05 AM, 12:10 AM, etc. (leaving gaps in case I need to insert another scan later).

The "power search" yields no results whatsoever when i attempt to search. Is this a problem with itunes or my computer? Everything else seems to load just fine involving the itunes store.

I am attempting to search for artists on itunes and for some reason it keeps telling me there are no results when I know I am tying in the correct artist. I have been trying this repeatedly and using different artists and song names and I am still getting no results. Is this a problem with itunes?

The only thing I would be concerned about is.
1st, Where did the media come from.
2nd, Was it clean and free of scratches.
Most of the CD&DVD Drives in Powerbooks seem to be very very picky about the media they like to play with.
Always be carefull of the Source from where it came.
Commercially produced Media is rarely a problem.
It doesn't take much eiter to make them act silly.
Good Luck....Don

Problem with shared column mapping

I have a problem with mapping different fields onto the same column. In most cases Kodo handles it very well but one tough case it does not
Modification references contract N-1 using contract_id field
Contract back references two modifications out of all modification owned by THIS contract (last_modification and executed_modifcation)
when both modifications are not null it works fine since I make sure both fields point to modification owned by the same contract
hovewer when I set one of the fields (executed_modifcation) to null (after it was not null) Kodo attempts to set not only executed_modifcation field to null but contract_id as well. Which obviously not desired
I understand that it is a pretty hard corner case. Do you think you can handle it or it is a dead end?
Attached are my files

Abe,
I fully agree with your analysis. In my case we can use precedence of direct
mappings over reference mapping in null situation.
However as you noted, there are cases when we have only references and so
you can not say which mapping is more important. However since we are
resolving NULL issue here, I am not sure we need to know precedence of
references - not null case should always take precedence. In other words:
priority 1: direct mapping
priority 2: not null reference
priority 3: null reference
Of course all three cases are subject rule of not changing value of shared
column
"Abe White" <[email protected]> wrote in message
news:[email protected]...
I admit that I didn't go through all your metadata, but I do believe that
3.0 final will handle this case. My plan is to implement updates such
that direct field mappings always take precedence over foreign key
mappings.
Let's say column CONTRACT_ID is used by int field contractId and is
also used by field lastModification as part of an FK to a Modification
instance (which I believe is close to your mapping). Because contractId
is a simple field rather than a foreign key, Kodo will give it the final
say on nulling/defaulting the CONTRACT_ID column. So if you null the
lasetModification field, CONTRACT_ID will retain the value of the
contractId field. Any non-null value of the lastModification field will
stilly have to jive with the contractId field, though, or else we'll
throw an exception like we do currently when you try to set 1 column to
multiple values.
I believe this solves the common case of shared
columns between direct mappings and FK mappings. There are other cases
in which multiple FK mappings overlap on certain columns, and this does
not solve nulling problems in those instances. However, I think those
cases are very rare and not worth the effort. Correct me if I'm wrong
and your situation actually is one of sharing columns between multiple
FKs and no primitives after all.

When attempting to install trial elements 11get amessage error installing shared technologies

when attempting to install trial elements 11get amessage error installing shared technologies

Hi hutchie4,
The error indicates that one or more of the following Shared Technologies failed to install:
Adobe Player for Embedding
Adobe Help
Camera Raw plug-in
Camera Raw profiles
Adobe ExtendScript Toolkit
Adobe XMP Panels
Microsoft Visual Studio runtimes
To resolve these issues, use the Adobe Support Advisor (ASA) to analyze the installation log file. For instructions, see Analyze install logs with Adobe Support Advisor (ASA).
Note: If you are using a downloaded installer, or running the installation from the hard drive, the Shared Technologies can fail because of the installation path. Copy the installation files to a folder to the root of the drive, such as C:\PSE<versionnumber>Installer\, and rerun the installation.
This Adobe document lists installation troubleshooting steps, including the "Shared Technologies" error
: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

PSE 12 error with 'shared technologies'

It seems I have fallen foul of what seems a common error. I am running Windows 7 and installing (or trying to) an Upgrade edition of both PSE and PSE Premiere. I have tried so far a normal install, shared technologies error. A clean install,error.
Virus and firewalls down. error. My opical drives seemed to be playing up so am using a new USB DVD drive, error.
Having tried to read the logs and still not how to resolve the problem. I have never had this sort of problem before with any program and I certainly dont expect it from Adobe. Help.

Certainly Fpben then I would recommend contacting our support team directly. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.
If you do decide to review your installation logs please see Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html. You are welcome to post any specific error messages you discover to this discussion thread.

Solution to the "Disappearing Comments" problem with shared reviews

I've been having repeated problems with users losing their comments on shared reviews, hosted on my webDAV server. After tearing my hair out for days, I wanted to share the simple fix to this issue, plus another tip:
DON'T USE PERIODS OR SPACES IN FILE NAMES. Use hyphens and underscores instead.
Illegal characters seem to gradually corrupt the file to the point where potentially every comment can get overwritten with a blank .xml file, permanently losing all your comments.
My wish to Adobe is that they would put a pop-up warning at the time of saving a file for shared reviews, something to the effect of:
"WARNING! saving a shared file with a space or a period could result in data corruption when shared over network drives or webDAV. Do you want to replace illegal characters with underscores?"
My other tip is this:
If using a webDAV server as I am, be sure to use the IP address rather than the domain name when specifying the location of the server.

With all the issues you describe, I would search for something conflicting with Mountain Lion.
Have you booted into Safe Mode and checked to see if it works correctly there? It will take a while to boot, and it will run a bit slow, so just look for the issues you described above. If they don't appear, you've got something installed that is causing the issues.

Problem with shared services,, cannot load "assign access control"

i m using 11.1.1.3 version of EPM.
I have configured Essbase with Shared Services.
When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours..
I re configured essbase ,, but problem remained same...
Could you please suggest what I can do assign filters to users.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Attempt to reinstall PSE 11 stalled by problems with Shared Technologies

Similar Messages

Maybe you are looking for