Attempted to perform an unauthorized operation error on windows 8.1 while installing SQL server 2008
Hi,
I am getting the error "Attempted to perform an unauthorized operation" on windows 8.1 while installing
SQL server 2008.
The specific error is The error is Attempted to perform an unauthorized operation."
at stepSqlBrowserConfigAction_install_ConfigNonRC_Cpu32 .
I have tried everything from copying to the C drive. I am the admin on the machine. I also checked access in registry. It already has acesss to HKLM\System\CurrentControlSet\Control\WMI\security
Can someone comment on how to resolve this issue. I also tried NT
AUTHORITY\SYSTEM but getting the same error.
Any help would be appreciated.
Hello,
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with
Windows 8.1. Please perform an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
If it fails again, please share with us the Summary.txt log file and the details.txt log file. The following article
may help you locate those files on disk::
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine
Hi Team,
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
Feature enabled and with Latest version.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
Regards,
Muthukumar.S.P.Hi,
Can you follow workaround mentioned in below msdn blog
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
As per the blog you have to open the msi log files which must be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
I've been trying fresh installation of SQL Server 2008 R2 enterprise on Windows Server 2012 R2 standard VM server several times for two weeks, but always get the error "Attempted to perform an unauthorized operation". At first, I attempted
to install all features, but failed several times. So I decided to try install just Database Engine service, and still fail at the SqlBrowserConfigAction_Install_ConfigNonRC_Cpu32, with the error "Attempted to perform an unauthorized operation".
I remote login to server with my admin domain account. This account is in server local Administrators group. I
1. Right-click on setup.exe file | properties | Compatibility tab | select compatibility to Windows 8.Then click OK.
2. Right-click on setup.exe file | Run as Administrator, to start the Installation Center.
I have the document of my installation steps and zip file of the installation logs, if you need to take a look.
Appreciate for any help!
ntthHi ntth,
"Attempted to perform an unauthorized operation"
The above error is always related to the Windows account SID mapping. I recommend you login into Windows using another Windows account which has administrative privileges and run SQL Server setup using that Windows account.
Besides, please note that we need to apply SQL Server 2008 R2 Service Pack 2 or a later update when installing SQL Server Windows Server 2012 R2. For more information, please review this
KB article.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Error while installing sql server 2008 r2 on win7
what can i do? i had .net framework 3.5 sp1
details is:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\seven\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
--- End of inner exception stack trace ---
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
at System.Configuration.SettingsBase.get_Item(String propertyName)
at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
LandingPage
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///d:/1ce672d6bc649fad4aefc7b7a6/x64/LandingPage.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.SqlServer.Configuration.Sco
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///d:/1ce672d6bc649fad4aefc7b7a6/x64/Microsoft.SqlServer.Configuration.Sco.DLL
Microsoft.SqlServer.Chainer.Infrastructure
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///d:/1ce672d6bc649fad4aefc7b7a6/x64/Microsoft.SqlServer.Chainer.Infrastructure.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///d:/1ce672d6bc649fad4aefc7b7a6/x64/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.Hi mahdy,
According to the error message, this issue is probably caused by a LandingPage.exe error. It couldn't bind to System assembly. The issue occurs while reading user.config
in the configuration file, there is code like this <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >. In this issue, it seems the application tried
to call the LandingPage.exe version 4.0.0.0, and this version is not existing in the machine. That should be the cause. So would you please kindly to check if LandingPage.exe 4.0.0.0 is existing?
As a workaround, Please try deleting the following sub folder to see if this will work:
Driver:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, please using following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose
Folder Options then go to the view tab.
2. Turn on
Show hidden files, folders or drives and disable Hide protected Operating System files (recommended)
Please read the following blog:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx
If there are any other questions, please feel free to ask.
Thanks
Grace
Please kindly mark the answer if it is a workaround. Thanks a lot *^_^* -
SETUP ERROR WHILE INSTALLING SQL SERVER 2008 R2
Hi ,
I'm coming across the following error while installing Microsoft SQL Server 2008R2
SQL Server Setup has encountered the following error:
The required MSI package 'D:\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Error code 0x84B20001.
I tried reinstalling the same. But results the same.
Please suggest. :)Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi'
doesn't exist.
Start time: 2013-12-31 20:47:50
End time: 2013-12-31 20:55:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xD2FD83B3%400xC2B0B50B%401202%401
Machine Properties:
Machine name: SAMPLE-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2005
Tools 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient 1033
Express Edition 9.2.3042 No
Sql Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.2.3042 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: TEST
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: TEST
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.TEST\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TEST
INSTANCENAME: TEST
ISSVCACCOUNT: TEST
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: SAMPLE-PC\TEST
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: TEST
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SAMPLE-PC\SAMPLE
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131231_204629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInvalidOperationException
Message:
The required MSI package 'D:\softwares\SQL Sever 2008 R2 Developer Edition\x86\setup\sql_engine_core_shared_msi\sql_engine_core_shared.msi' doesn't exist.
Data:
ChainerInvalidOperationExceptionData = InstallPackage
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
at Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) -
SQL Server 2008 Developer install failed - Attempted to perform an unauthorized operation
I'm trying to install SQL Server 2008 Developer edition on my laptop running Windows XP Professional SP2. I ran the installer as a domain user with admin rights to the local box. The installation advisor program certified that my system was ready for the install, but nevertheless I had to uninstall SQL Server 2005 Express edition and install .NET framework 3.5 SP1 first. Once that was done, the installer finished, having successfully installed all the components of SQL Server 2008 except for the core database engine. It failed with this error message: Attempted to perform an unauthorized operation.
I uninstalled SQL Server 2008 and reinstalled with the same results.
Below is a snippet from my C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081014_203925\Detail.txt which seems like it may be relevant.
Can anyone offer any assistance? Would be greatly appreciated.
2008-10-14 20:50:15 SQLEngine: --EtwSetup: Updating WMI Security
2008-10-14 20:50:15 SQLEngine: --EtwSetup: WMI sddlA;;0x120fff;;;SY)(A;;0x120fff;;;BA)
2008-10-14 20:50:15 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2008-10-14 20:50:15 Slp: Sco: Attempting to open registry subkey SYSTEM\CurrentControlSet\Control\WMI\Security
2008-10-14 20:50:15 Slp: Prompting user if they want to retry this action due to the following failure:
2008-10-14 20:50:15 Slp: ----------------------------------------
2008-10-14 20:50:15 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2008-10-14 20:50:15 Slp: Inner exceptions are being indented
2008-10-14 20:50:15 Slp:
2008-10-14 20:50:15 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2008-10-14 20:50:15 Slp: Message:
2008-10-14 20:50:15 Slp: Attempted to perform an unauthorized operation.
2008-10-14 20:50:15 Slp: Data:
2008-10-14 20:50:15 Slp: WatsonData = HKEY_LOCAL_MACHINE@SYSTEM\CurrentControlSet\Control\WMI\Security
2008-10-14 20:50:15 Slp: DisableRetry = true
2008-10-14 20:50:15 Slp: Inner exception type: System.UnauthorizedAccessException
2008-10-14 20:50:15 Slp: Message:
2008-10-14 20:50:15 Slp: Attempted to perform an unauthorized operation.
2008-10-14 20:50:15 Slp: Stack:
2008-10-14 20:50:15 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
2008-10-14 20:50:15 Slp: ----------------------------------------
2008-10-14 20:50:31 Slp: User has chosen to cancel this actionHi,
I have recently donwloaded the evaluation version of SQL SERVER 2010. I have a similar problem to this user as shown below. I have tried changing the registry permissions for Microsoft SQL Server but this made no difference. Since the registry entries are created by the installation process it seems odd that it cannnot subsequently update the entry.
Any ideas?
Dominic
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xD3BEBD98@1211@1
Configuration error description: Attempted to perform an unauthorized operation.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100408_135119\Detail.txt
2010-04-08 14:01:43 Slp: ----------------------------------------
2010-04-08 14:01:43 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2010-04-08 14:01:43 Slp: Inner exceptions are being indented
2010-04-08 14:01:43 Slp:
2010-04-08 14:01:43 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2010-04-08 14:01:43 Slp: Message:
2010-04-08 14:01:43 Slp: Attempted to perform an unauthorized operation.
2010-04-08 14:01:43 Slp: Data:
2010-04-08 14:01:43 Slp: WatsonData = Microsoft SQL Server
2010-04-08 14:01:43 Slp: DisableRetry = true
2010-04-08 14:01:43 Slp: Inner exception type: System.UnauthorizedAccessException
2010-04-08 14:01:43 Slp: Message:
2010-04-08 14:01:43 Slp: Attempted to perform an unauthorized operation.
2010-04-08 14:01:43 Slp: Stack:
2010-04-08 14:01:43 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2010-04-08 14:01:43 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2010-04-08 14:01:43 Slp: ---------------------------------------- -
Hello,
I'm new to SharePoint development. I just created a empty sharepoing app in VS2010, added a webpart and in .cs file of this webpart, add hello inside RenderContents. Its compiling fine. but giving following error while deploying
Error occurred in deployment step 'Add Solution': Attempted to perform an unauthorized operation.
My VS 2010 is running under Administrator privileges & I'm admin to this machine.
Comments?Hi, just had the same problem (on a 2013 enviroment) and was able to solve it partly by this post.
Also experience a problem with dublicate ports, see here: http://technicaltrix.blogspot.dk/2014/11/error-occurred-in-deployment-step-add.html
http://technicaltrix.blogspot.dk/ -
Hi,
I'm unable to deploy a custom workflow/ visual web part or anything using Visual Studio.
Here is the Output trace:
------ Build started: Project: TestWorkflow, Configuration: Debug Any CPU ------
TestWorkflow -> E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.dll
Successfully created package at: E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.wsp
------ Deploy started: Project: TestWorkflow, Configuration: Debug Any CPU ------
Active Deployment Configuration: Default
Run Pre-Deployment Command:
Skipping deployment step because a pre-deployment command is not specified.
Recycle IIS Application Pool:
Recycling IIS application pool 'SharePoint - 1111'...
Retract Solution:
Retracting solution 'Testworkflow.wsp'...
Deleting solution 'Testworkflow.wsp'...
Add Solution:
Adding solution 'TestWorkflow.wsp'...
Deploying solution 'TestWorkflow.wsp'...
Activate Features:
Activating feature 'Feature1' ...
Error occurred in deployment step 'Activate Features': Attempted to perform an unauthorized operation.
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Points to be noted:
I have opened the visual studio using the System Account and "Run as Administrator".
I checked the User policy for the particular web app and it has Full read and Full control for the System account
I checked SharePoint administration under services and verified the system account credientials.
Can you please help me solving this.
Thanks,
SachinPlease try giving permissions
pen the SharePoint 2010 Central
Administration.
- Go to Application Management
–> Change site collection administrations
- Select the correct site
collection and type your windows account as the secondary site collection administrator.
- Try deploying now, it should work.
or
You can grante permissions in "SITE ACTIONS > SITE PERMISSIONS"
Ref :http://learnsharepointwithme.blogspot.in/2013/04/error-occurred-in-deployment-step.html
Please remember to click 'Mark as Answer' on the answer if it helps you -
Office 365 - Access User Profile -Error: Attempted to perform an unauthorized operation
Hi,
I am using a console application to read the user profile data in office 365.
I am getting the error as "Attempted to perform an unauthorized operation", while running the console.
I have used the below code:
static void Main(string[] args)
Uri test_targetSite = new Uri(test_siteurl);
string decryptedPwd = Decryptdata(password);
foreach (char c in decryptedPwd)
securePassword.AppendChar(c);
SharePointOnlineCredentials onlineCredentials = new SharePointOnlineCredentials(login, securePassword);
//getting UserProfile Service
TestAdminUserProfileService.UserProfileService admin_ups = new TestAdminUserProfileService.UserProfileService();
admin_ups.UseDefaultCredentials = false;
string authCookieValue = onlineCredentials.GetAuthenticationCookie(test_targetSite);
admin_ups.CookieContainer = new CookieContainer();
admin_ups.CookieContainer.Add(new Cookie("FedAuth", authCookieValue.TrimStart("SPOIDCRL=".ToCharArray()), String.Empty, test_targetSite.Authority));
// Gets the first profile
GetUserProfileByIndexResult pResults = admin_ups.GetUserProfileByIndex(-1);
int totalUsers = (int)admin_ups.GetUserProfileCount();
int counter = 0;
//Loop through all UserProfiles and Add to custom Group
while (pResults.UserProfile != null)
try
// Get the next profile
pResults = admin_ups.GetUserProfileByIndex(Convert.ToInt32(pResults.NextValue));
How to fix this for Office 365?
ThanksHi,
Thanks for the reply.
1. How to check, which is the App pool account for office 365 portal?
2. Which account has access to user-profile service application? if yes, how to verify the same?
3. How to access Manage service applications in office365? Like in SharePoint 2010 or 2013
Go to SharePoint Central Admin > Application Management > Manage Service Application
Thanks -
Installing SCCM 2012 R2 "Attempted to perform an unauthorized operation"
Hi all.
I'm a student with a mission of reviewing SCCM 2012 R2 for a company in a lab environment. I have access to a bladesystem with 4 physical servers. On these I have 7 virtual machines: 2 DCs, 2 servers for SCCM and SQL and 3 clients. The SCCM installation
is supposed to be a single standalone primary server with the SQL database on another physical server.
When I try to install the SCCM i get to the point where I have to submit my SQL information, but I keep getting the error message:
"Attempted to perform an unauthorized operation".
I've searched the internet for 2 days now and I'm near a mental breakdown...
I've installed the SQL server, made my admin account (which I use everywhere for simplicity) member of all the admin groups (schema, domain, enterprise etc.), I've extended the AD schema and the SPNs are set, I have full connectivity between the all servers
with ping and nslookup both returning correct values, the servers are not clustered, I have installed all required features, all firewalls are disabled.
Please, if anyone knows whats wrong give me a hand, all help is appreciated! :)Well I'm installing the trial version downloaded directly from Microsoft, I'm not sure if that's what you mean by reviewing, but I'm performing the acutal install in a lab environment. I do install the SCCM on another server than the SQL, both are virtual
machines on different physical servers within the same bladesystem. I could try to install them on the same machine, but I have limited amounts of RAM and hard drive space. I'd prefer to keep them separate but if it's too hard to find the source of the error,
I could have a look if I have enough for the install on the same machine. How much RAM and hard drive space would you recommend if I install it on the same server? -
Attempted to perform an unauthorized operation sql server 2008 ( Windows 7 )
Dear All,
I am facing following error Sql 2008 setup "Attempted to perform an unauthorized operation sql server 2008 ( Windows 7 )"
I tryed to run setup as administrator
I tryed to run setup to create new user as an administrator and login in new user then run setup
I tryed to run in compatible mode windows xp sp3.
I tryed to login in Administrato account and run setup
in this all time same error came i am tired too much. because of this i format my pc and install windows 7 but still it is same please help me.
Thanks is advance
Regards
Uday
[email protected]Hi,
Can you locate summary.txt file and details.txt file from location
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
Upload these to files on some shared location like dropbox, onedrive etc and post link here I would analyze and see where actually problem is coming.
This link would also help you in searching log files.
PS: Dont reply to duplicate thread you posted
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
QueryService SoapException Attempted to perform an unauthorized operation
Hi, im trying to use the search web service of a moss 2007 and i get:
Server was unable to process request. ---> Attempted to perform an unauthorized operation.
Look like a credentials issue, similar to this thread:
http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/45414695-7baa-4d4a-9656-7b1a10acc397/
But i dont understand hwo to solve it, moss 2007 is in a domain, with ntlm auth, im logged in a windows machine inside the same domain, there is an active directory, i dont know ...
Im trying to use the /_vti_bin/search.asmx service...
The add web service reference works, but my call to status method fails with this error...Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. Appreciate your patience.
Thanks & Regards,
Emir Liu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Emir Liu
TechNet Community Support -
Attempted to perform an unauthorized operation.
Hi all,
In the installation process, i am getting below error for Database engine service,reporting service and integration service.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x21C1C994%400xBB814387&EvtType=0x21C1C994%400xBB81438
Details:-
64 bit machine,HP probook,I5 processor,windows 8 OS.
Pls help me.
thanks
SelvaCheck if the related forum threads are helpful:
http://stackoverflow.com/questions/19451714/error-while-installing-sql-server-2012-standard-edition
http://social.msdn.microsoft.com/Forums/en-US/b652086c-e69c-4031-8ff0-97ed819009c7/sql-server-2012-rc0-setup-failed?forum=sqldensetup
I had to run a registry cleaner product (RegCure Pro) when I could not install SQL Server 2014.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Attempted to perform an unauthorized operation sccm 2012 sql 2012
Hi,
I'm trying to install System Center 2012 SP1 Primary Site, I' ve selected Install the primary site as a stand-alone Site option, after I completed Database Information page in Installation Wizard and clic next, i get this error message
"Attempted to perform an unauthorized operation".
I have a SQL 2012 SP1 Ent Cluster (2 nodes, Windows Server 2012), the installation account is local administrator in both nodes, and sysadmin in SQL Instance. Firewall Service is disable in all servers.
I tested connecting remote WMI from Primary Site Server to both SQL Server Nodes and the conectionn was succesfully. I created a udl file to test SQL conection and also was succesfully.
I'm not using CAS.
Any Help?
Thanks.HI,
The problem was an issue with the Cluster network name resource.
Cluster network name resource 'SQL Network Name (Name)' failed registration of one or
more associated DNS name(s) for the following reason:
The
handle is invalid
After fix this error on SLQ Cluster nodes, the Database Information page passed successfully
try this
http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/ -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li
Maybe you are looking for
-
Format external HD for use with Mac Network and PC
System config: Home network: Mac Pro & MacBook Pro connected via AirPort Extreme. Both run OS X 10.5.6. The Mac Pro also runs Windows XP Pro. Work computer: Dell, Latitude D830 running Windows XP Pro. Situation: I have a Western Digital WDMT5000TN 50
-
Expdp error with query parameter
i am trying to use datapump and using query parameter in there as below... but when i use the below, its exporting some system "repcat$" tables and nothing realted to scott.audit table or anything realted to my query where clause...what am i doing wr
-
My old IMAC is a few years old. Just bought a new one OS X 10.8.2. The old one is OS X 10.5.8. Can I install Lion or equivalent and then synch both on ICLOUD. Or is there another way to synch the two computers.
-
I'm new to DW CS3 and am having a hard time getting a web page to play an FLV file. I set everything up in DW and it plays just fine when I preview it but when I upload the new Page and the FLV file and try to view it on the web, nothing, nada. I als
-
Data from servlet to jsp.. how to
Dear Developer, i've a resultset that consists of nearly 500 records, now i want to display all records using a jsp , how could i pass the data returned by result set to jsp, as well how the jsp can receive this data. please reply me. thanku