"Attempting to copy to disk ipod failed unknown error occurred (-69)"

wat is happening to my ipod ? im using a 3rd generation 15gb ipod. after i try to refort using the lastest ipod updater it become like this ? and my connector is using a firewire. can any one help me with this ? pls .

ok in short it is like this
I have a fire wire ipod.
I know the device is recognized by the PC because it shows up in "my computer" and I can see what is on the ipod.
When I try to update the songs in Itunes the Ipod is recognized but updates fail.
The error reads: "attempting to copy to disk "IPOD" Unknown error -69"
I try to run the IPOD update /restore software and that give an error also.
"IPOD Manager internal error" and then the window closes.
so after everything i went to check my ipod drive to see if there is any folders in it . this is all i got calander notes and contacts. tat is all i have and if i put files into my ipod folders. it can. but it jus cant transfer music over from itune. man im at my wit end

Similar Messages

  • " Attempting to copy to disk "---- ipod" failed.The disk could not be.... ?

    hello every one and happy holidays.
    " Attempting to copy to disk "---- ipod" failed.The disk could not be read from or written to. "
    I have this problem and I can find a solution
    I had try every possible tip
    including.
    - reset many times
    - restore
    - diskwarrior
    - disk utility
    - erase disk
    - erase disk Zero out data
    - erase disk 7-Pass Erase
    - iPod Updater 2005-03-23
    - iPod Updater 2005-09-06
    - iPod Updater 2005-09-23
    - MacOSXUpdateCombo10.4.3
    - iTunes6.0.1 reinstall
    the ipod works just fine and operates properly
    it just does NOT whant to sync with itunes
    I know I'm not the only one with this issue
    there are many post in regard of this problem
    I believe that this is a software issue and not a hardware
    please comment and give any tip for me and the other people with this problem
    thank you
    sam
    dual 800 G4   Mac OS X (10.4.3)  

    I had the same problem. And to think I actually HESITATED at installing the update. Oh wait... this happened AFTER the update. Funny how often that happens, eh? But I digress...
    Anyway, I had two errors- initially the iPod stated my music library was somewhere else, and did I want to sync to that library. When I said yes, it reverted then to the "attempting to copy to disk"error. Further, iTunes showed that my iPod on the iTunes was EMPTY. However, my actual iPod hadn't lost any data. Confused yet? So am I.
    *Last ditch effort- I went back in, and updated all my permissions, did a permission repair and then a permission verify.
    * Also did a disk verify on the iPod to make sure it wasn't sick.
    *I also drug a new song into my library.
    *Changed from the USB plugin to the firewire. (Although I did this earlier in the day, and hadn't seen a noticeble change)
    * Opened the bottle of Sauvignon Blanc. (should have done that a few hours ago)
    When my first pop up asked about did I want to sync to the mystery persons library, I said yes. (At the worst, I have all my music and could reimport all 30G of it, if necessary.) And immediately, the sync began, and began appropriately. However, it IS re-syncing every single song I had on the iPod to begin with.
    I suspect something nasty happened in the iTunes update, ever since the intel thing happened, the updates have been a bit sketchy. I really like Apple products, but I've gone through 3 iPods due to software meltdowns, and it's a bit frustrating.
    Good luck!
    iMac G4   Mac OS X (10.3.9)   iPod scroll wheel,
    iMac G4   Mac OS X (10.3.9)   3rd generation I think...

  • 30gb Video error message "Attempting to copy to disk "Ipod" failed.

    I have a 30gb ipod video and over the past day it is come up with this error message when I have tried to put songs from itunes into it. "Attempting to copy to disk "Ipod" failed. This disc could not be read from or written to". I've tried restarting it with no joy, I've evne tried resetting it back to it's factory settings now and nothing. Right now the Ipod had no songs on it can not even in use due to this. It was all fine till I updated to the lastest Itunes. Anyone out ther no whats wrong?

    I have and 80gb Classic and Im getting the same message now it just started last night when i was syncing some new podcasts now everything that was on my ipod is gone and it acts like its syncing then i disconnect and its all gone I've reset and restored default settings nothing works
    and my warranty expired 2 days ago

  • MSSGE attempting to copy to disk "Ipod" failed the disk could not be read..

    What is going on with this alert message " Attempting to copy to the disk " Ipod" failed the disk could not be read from or written to." I down loaded a song from Itunes and all of the sudden I get this message and Itunes went crazy, it wouldn't eject my Ipod, I took it to apple and they restored my Ipod saying it was fine, then I get home and I can't put alot of songs in my library back on it, itunes keeps repeating that message. I had no problem putting them on before. I have uninstalled both Itunes and Ipod updater numerous times to no avail HELP!

    See if any of the troubleshooting steps in this article help: "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • Solved "Attempting to copy to disk "ipod" failed. Could not be read from or

    Finally found a solution that worked for me when getting this error message on an 2nd Gen. iPod Nano.
    There is a lot of discussion on this topic with no real answers coming back other than to read this article/topic. So, I wanted to share a solution that worked on mine.
    The background: Computer running Windows XP Pro. Up-to-date iTunes and iPod software. I downloaded several CDs into iTunes and synced with no problem. I made a few purchases from iTunes Store and would get to one song that when I tried to sync, the following error message appeared; "Attempting to copy to the disk "ipod" failed. The disk could not be read from or written to." When I deleted the song, then I could sync without receiving the error message, but the purchased song would not be included. I restored my iPod, my iTunes was up-to-date, ran chk dsk, emailed support, searched the forums, followed instructions, re-downloaded the problem song from iTunes Store, BUT as long as that problem song was included, I could not sync without getting the error message.
    The solution (this worked in my situation): After doing all of the above and not getting rid of this problem, I set the iPod to manually manage my music and synced the iPod (without the problem song, which was already deleted from iTunes). When I deleted the song from the iTunes library, I would always click the button to keep the song in the files instead of sending it to trash. I then went into the iTunes music folder where my songs were kept and opened the file for the problem song. I dragged the song back into my purchases folder in iTunes. From the purchases folder, I dragged the song over to my iPod in iTunes. Then synced. The problem song synced without any problems and the error message did not appear. Thinking that something was still not right, I went back and clicked on the button to NOT manually manage my music and then re-synced. Same good result. No error message. The problem song sings along just fine now with no more error message.
    I haven't tried to download another song just yet, so this may not hold, but at least this worked and resolved this problem song. There may be some other factors through all of the work that I did above in trying to resolve this problem that contributed, but it wasn't until I set the iPod to manually manage the music and brought back in the problem song that the error message disappeared. Hopefully this might help. It worked for me so I'm happy now.
      Windows XP Pro  

    I see you've stumbled upon the catch-all article for this incredibly generic error message. Note the phrasing of it: "DISK cannot be READ FROM or written to." Notice that the error doesn't specifically state that it's the iPod disk that cannot be read or written. I used to get this error all the time when I had my library stored on a remote server. The issue being that my machine couldn't access my songs fast enough to copy them to the iPod w/o timing out, and so the disk, in this case my file server, could not be read from. Since you mentioned previously that you're having some anomalies with your library, I would say concentrate on correcting that, rather than worrying that your iPod is kaput.
    regards,
    -c.

  • Attempting to copy the disk "IPOD" failed. Disk could not be read from or written to?

    So.....
    I own a 5th genereation Ipod Nano. On a windows PC.
    On my iTunes all my music and playlists exist. On my actual Ipod it only shows 3/4 of my music (for some reason it wont sync the rest). It also shows zero playlists on my Ipod. I now cant sync new music onto the device, despite it showing up on my library. Also I've noticed that for some reason the artwork is messed up e.g. the artwork for Aerosmith is now showing up when a Thin Lizzy song plays :S
    I have tried restoring to to factory setting but got the same error message!
    Please please please can somebody help me fix it!!!!!!!!!!!!!!!

    Have you worked through the suggestions in this Apple support document yet?
    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    B-rock

  • Windows 8 issue - Attempting to copy to disk "X" Failed. You do not have enough access privileges for this operation

    Let me give you a quick rundown of my setup
    I have a fresh copy of windows 8 64bit with a slave drive installed to handle alll my media.
    Im logged in as admin and salve drive has all permissions marked as "allowed"
    The error messege that occures when i go to add a new song to the itunes library (which also makes a copy in the music folder on the slave)
    The Error reads as follows "Attempting to copy to disk "X" Failed. You do not have enough access privileges for this operation"
    I have tried a uninstall followed by reboot and a fresh install but that made no difference......  Please help me.
    _Kevin

    You are showing problems with permissions on the drive. You need to either run iTunes as an administrator, or check to make sure that you are logged in with administrative priviledges on the computer. Despite having done it before, something has changed your permissions on the computer, has nothing to do with the phone.

  • What does it mean when I have my iphone plugged in trying to sync it and just when it gets to step 7,  something pops up that says "attempting to copy the disk 'TI10653500D'  failed. The device is not connected"

    what does it mean when I have my iphone plugged in trying to sync it and just when it gets to step 7,  something pops up that says "attempting to copy the disk 'TI10653500D'  failed. The device is not connected"

    Have you tried a different cable?

  • ITunes could not copy [song title] because an unknown error occurred (-54)

    For the past month or so I've been unable to sync it with iTunes. When I do, it starts but after a few hundred songs, I get the error that "itunes could not copy [song title] because an unknown error occurred (-54). When I click OK, it then says "synching" but nothing is actually happening, and the only way to even get my browser working again is to restart my pc. I have deleted the song in question, but it will just do it again with a different song. I have uninstalled and reinstalled iTunes to the most recent version, reset the iPod Touch numerous times, As well as deleting the iTunes files off of my computer and reloading all the muisc to it. To make things more interesting, it does all of this on my laptop pc as well as my desktop. Now. all of this may have started before upgrading the software, but that was the last time in months that I tried to sync it, so there may or not be a correlatoin there.
    Any help is greatly appreciated, and thanks in advance.

    Try:
    https://discussions.apple.com/message/18687758#18687758
    https://discussions.apple.com/message/19573110#19573110
    https://discussions.apple.com/message/20050391#20050391

  • When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    Hi msclaude,
    Welcome to the Support Communities!  I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201263
    If you can't update or restore your iPhone, iPad, or iPod touch
    You can put your iOS device into recovery mode, then restore it using iTunes.
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    I hope this information helps ....
    - Judy

  • Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • TS3694 Error message "Itune could not copy 'song' because of an unknown error occured"??

    I purchased a couple of albums from Amazon and downloaded to Itunes. I have done this many times in the past. I can play the songs on Itunes but when I try to upload that music to my Ipod I get an error message "Itunes could not copy "song" to the Ipod because of an unknown error has occured. I have purchased many albums and songs from Amazon and even the Apple store and never had this problem. Has anyone had this happened and was there a fix to be able to upload the music to the Ipod??? Any help would be much appreciated!!

    1.Update your Quicktime
    2.If you have local Admin rights righ click Flash and try "Run as administrator"
    When trying to export a MOV file
    Are you importing a mov file and having trouble to export to swf/mov
    or
    do you mean you have an animtion you want to export to Quicktime?

  • Attempting to copy to disk "Ipod of ME" failed. Unknown Error occured (-69)

    I dont Know what to do! This error comes up when I try to update my ipod Shuffle and hardly lets me put songs on it.

    See if this helps: iTunes displays a -69 error when syncing iPod

  • HT201210 I cannot restore my Ipod - An unknown error occured (2001).

    I cannot restore my Ipod touch - An unkown error occored (2001)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

Maybe you are looking for

  • Send an email base on data in database

    Hi, I have created an stored procedure,which will send an email on certain condition but it doesn't seen to work. can anyone pls help. sp := CREATE OR REPLACE procedure AMC.amc_renewal(amc_date date) as begin for dates in (select serial_no, ORION_SUP

  • Java Security... FRM-92100 Error

    Here is the error. Only 3 out of 24 machines are getting the error. The other 21 are able to select the button(s) and access reports and/or pics. FRM-92100: Your connection to the Server was interrupted. This may be the result of a network error, or

  • After Effects error: crash occurred while invoking effect plug-in "particular"

    Hi, I was trying to following the Kramer's tutorial "The Ring" in AFx (http://www.videocopilot.net/tutorials/the_ring/), that involves the use of Trapcode Particular, and all went well.. Then I've customized it, not drawing a circle, but a square, an

  • GE module in Catalyst 4500 family

    I want to connect 18 GBIC in my Edge switch to one Catalyst 4506 in Distribution Layer. can I use 18 port Gigabit Ethernet Module, server switching (WS-X4418-GB) or I have to use 3x 6port Gigabit Ethernet Module (WS-X4306-GB). Thanks for your help.

  • Multiple deliveries to one invoice in export sales

    Hi Dear teamsters, The client requirement is, In export sales we have to create one invoice for many deliveries.the preriquisite to do is some parameters like payer,payment terms etc should be same,Inspite all above are same in the split analysis the