Attempting to create a rollover in Dreamweaver

Attempting to create a rollover in Dreamweaver but when doing so the only way it works is if you approach it from the bottom and not all around. Please see code below and please advise if this is correct or if there is something i may need to change.
<div class="polibox"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image2','','images/PoliticianOneRO.jpg',1)"><img src="images/politicianone.jpg" width="142" height="142" id="Image2" /></a></div>
Thank you.

More often than not, these kinds of symptoms are the result of partial masking of the rollover by an absolutely positioned element. Are you using absolute positioning on the page?
For sure, though, the only way someone can diagnose this accurately is to actually see the page and its underlying code. Can you post a link to the page, please?

Similar Messages

FW8 Can't Seem To Create Disjoint Rollover Effect

Hello,
I used previous versions of FW to create "disjoint rollover"
effects without any problem. This time I'm using FW8 to create the
same effect but so far it has proved unsuccessful, I have even
tried the step by step instruction of "help" menu with no success.
Can somebody pease help me with how to achieve this effect
with FW8 if it is possible.
Many thanks in advance!

More than half of the trouble posts on the DW forum are the
result of using
a graphics editor to write HTML. It's a grand idea that
utterly fails.
Such HTML is rigid, and fragile. You cannot avoid HTML if you
are going to
be working on the web, no matter what the marketing hype
says.
Harsh? Perhaps. True and well intentioned? Yes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"WollombiWombat" <[email protected]> wrote
in message
news:eo4c1j$kmn$[email protected]..
> Murray: I think you are being a little harsh here for a
newbie. If the
> doco
> says it works then it bloody well should!
>
> Linda: A voice of moderation and consideration as
always. No wonder I like
> your books and contributions at places like PVII and did
I see you at
> Community
> MX ?
>
> Cobbyfred: Can I suggest that you take up Murray's
veiled suggestion and
> attempt to build the disjointed rollover using DW8 ?
>
> Cheers all.
>

Create a rollover image that appears in a different box?

Is there a way to create a rollover so that when your mouse moves over the first, the rollover appears as a larger image (right next to / above / over) the first?

Pure CSS Disjointed Menu Rollover
http://alt-web.com/DEMOS/CSS-Disjointed-Menu-Rollover.shtml
Pure CSS Disjointed Text Rollover
http://alt-web.com/DEMOS/CSS-Disjointed-Text-Rollover.shtml
Dreamweaver Disjointed Rollovers with Image Swap behaviors
http://www.communitymx.com/content/article.cfm?cid=E11E8
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

How to create a rollover button effect in Captivate 7?

Hi,
I recently upgraded from Captivate 6 to Captivate 7 and am curious to know how I can create a rollover state for a SmartShape button. Basically, let's say I have a SmartShape being used as a button. What I want is to have the button have a glow effect and a shadow effect each time the mouse is hovered over it. Is there an easier way than having two objects on the slide -- one as the normal state and one the mouse hoever image. What I'm thinking is that the mouse hovered state image will have it's 'Visible in Output' set as unchecked and I can use an Advanced Action to show the object on mouse hover. Perhaps I can have the mouse hovered state image as a rollover SmartShape too?
Nonetheless, this looks like too much work. If I have 10 clickables on the page for which I want rollover effects, I would need to have 10 additional objects with their rollover states -- just seems like too much, but perhaps that's the Captivate way. Or I am I missing the obvious?
Any help would be appreciated.
Thanks,
Sean

Most people would say the easiest way to achieve what you are talking about would be to just create your own custom image button in a graphics editor and give the Over state image having the glow effect that you want.
If you decide to go that route, this tutorial describes the process of creating an image button:
http://www.infosemantics.com.au/adobe-captivate/create-custom-image-buttons
Another possibility is that you can use the Infosemantics Event Handler widget to trigger an Apply Effect action and use the Glow filter as the effect.
However, this may require some tweaking since it's not that easy to time effects that are applied via an advanced action.

How do I create a webpage in Dreamweaver WITHOUT using layers?

I'm reading a lot about how we should not use layers and
tables when creating a website in Dreamweaver because of something
called "absolute placement" (or something), which is the reason the
text in my website is constantly misaligned or overlapping when
opened up in Firefox. Although, I've never had this problem before
for the past three years I've been using Dreamweaver to create my
sites, which is what's most frustrating I think.
So, I guess I'm wondering how, then, do I create a webpage in
Dreamweaver WITHOUT using layers and tables? The only thing I've
been able to do w/o layers/tables is to literally hit "enter" and
"tab" continuously until the cursor is somewhere close to where I
want it to be on the page. But that seems a little old-school (for
lack of a better term) to really be the way to do it.
Also, if I've used a lot of layers/tables already in my
website, is the general recommendation for be to rebuild my site
completely w/o layers/tables, or is it feasible for me to have
someone who knows HTML just come in and fix the actual HTML code
for me to make it all work?
Ideally, I just want something to help me fix this problem
w/o having to hire someone else to come in, cause I've been working
this site for about a year now and am just now finally getting it
up online only to find that the way it looks online is not the way
it looks in Dreamweaver. I'd really really appreciate any
suggestions/advice.
Thank you so much!

Hello,
The first bit of advice, which you may already be doing, it
to learn HTML
and CSS.
CSS is used to style and position elements.
Instead of adding numerous to add spacing, for
example, you can use
CSS to add margins or padding to elements to move them away
from other
elements.
Also, IMHO there is nothing wrong with using tables,
specially as you learn.
You can also use <divs> and CSS to position them (a
table-less layout).
There are a number of threads in this forum comparing them
and giving many
designer's views.
It's Dreamweaver's "Layout Mode" you should stay away
from.Use "Standard
Mode"
It creates tables with rowspanss and colspans that are very
fragile.
Something as simple as a user having a different text size
setting in their
browser than what you had in yours when you designed can make
the page break
apart.
More info:
http://apptools.com/rants/spans.php
Also, "Layers" are an older DW term for AP Divs (Absolutely
Positioned).
They can cause you a lot of frustration.
More info:
http://apptools.com:80/examples/pagelayout101.php
I would strongly suggest you take a couple of hours to do
these tutorials.
They are a great introduction to using CSS, making a
stylesheet and using
DW's "wizards".
They are very well written, illustrated and easy to follow.
I promise you will walk away with a different outlook on how
you can design
a page.
They are not intended to replace learning HTML or CSS in any
way, I just
think it will benefit you greatly seeing what you can do.
http://projectseven.com/tutorials/css/css_td/index.htm
http://projectseven.com/tutorials/css/qdmacfly/index.htm
I hope that helps.
Take care,
Tim
"darkpwca" <[email protected]> wrote in
message
news:[email protected]...
> I'm reading a lot about how we should not use layers and
tables when
> creating a
> website in Dreamweaver because of something called
"absolute placement"
> (or
> something), which is the reason the text in my website
is constantly
> misaligned
> or overlapping when opened up in Firefox. Although, I've
never had this
> problem
> before for the past three years I've been using
Dreamweaver to create my
> sites,
> which is what's most frustrating I think.
>
> So, I guess I'm wondering how, then, do I create a
webpage in Dreamweaver
> WITHOUT using layers and tables? The only thing I've
been able to do w/o
> layers/tables is to literally hit "enter" and "tab"
continuously until the
> cursor is somewhere close to where I want it to be on
the page. But that
> seems
> a little old-school (for lack of a better term) to
really be the way to do
> it.
>
> Also, if I've used a lot of layers/tables already in my
website, is the
> general recommendation for be to rebuild my site
completely w/o
> layers/tables,
> or is it feasible for me to have someone who knows HTML
just come in and
> fix
> the actual HTML code for me to make it all work?
>
> Ideally, I just want something to help me fix this
problem w/o having to
> hire
> someone else to come in, cause I've been working this
site for about a
> year now
> and am just now finally getting it up online only to
find that the way it
> looks
> online is not the way it looks in Dreamweaver. I'd
really really
> appreciate any
> suggestions/advice.
>
> Thank you so much!
>

I continue to have a problem attempting to create Panorama with PE 7

Has anyone ever received and answer from Adobe for this problem that actually worked?
Updated
Sunday, November 1, 2009 12:39:26 PM PST
Opened
Wednesday, October 21, 2009 2:47:58 PM PDT
Status
Open - Pending Adobe Response
Product
Photoshop Elements 7.0
Support contract
Adobe Support Program
Subject
Panorama function does not work
Notes & responses
Notes from Customer
Sunday, November 1, 2009 12:39:26 PM PST
I followed your directions and closed all open files including "spySweeper" and "Norton". I went to "run" and entered %appdata% and
deleted "Adobe" NOTE: there was another file titled AdobeUM which I did not delete. I opened Adobe Elements and went to File->New
->Photomerge Panorama and immediately
got
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I tried this several times from both the edit screen and the screen that shows the individual images and always got the same results
Notes from Customer
Friday, October 30, 2009 9:41:22 AM PDT
I have tried your suggested solution several times and it does not work......fortunately I have found another product that does work
and have moved on to it. I would like to know what is causing the problem particularly since a "lot" of other users are reporting
the same problem on the Internet.
Notes to Customer
Thursday, October 29, 2009 1:10:51 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
Our engineers hopefully will find the issue and post a document about it
in the Adobe Knowledge Base and/or release a fix.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Wednesday, October 28, 2009 5:10:30 PM PDT
I followed your instructions and still have exactly the same problem, but thanks for the attempt. I hope your engineers can find th
e problem as if you look on the internet a lot of other people are having exactly the same difficulty.
Notes to Customer
Wednesday, October 28, 2009 10:03:39 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I received your images and was able to reproduce your problem on my
machine several times and also triggered the same error even after
resaving the images using the "Save for Web" function.
Interestingly, after deleting the program's preferences, I was able to
use Photomerge successfully on your images and could not reproduce the
error.
Try the following and see if these steps fix the issue for you as well:
1. Close all open programs.
2. Click on Start > Run.
3. In the run dialog field, type: "%appdata%" [without the quotes].
4. Delete the Adobe folder shown there (this will delete all Adobe
software preferences and settings).
5. Close the window.
6. Launch Photoshop Elements Editor and try using the Photomerge command
on your images again.
The files are being forwarded to our engineers to see if they can
isolate why these images may corrupt or damage Photoshop Elements'
preferences and settings.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Tuesday, October 27, 2009 1:29:17 PM PDT
Second file
Notes to Customer
Tuesday, October 27, 2009 11:32:49 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
We show only one image uploaded to our Support Portal. Its file name is
Slide-2.jpg. We will need all the images that you are attempting to
merge uploaded to the Web Portal in order to test and to properly
investigate your issue.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 5:40:57 PM PDT
Files used to attempt to create panorama are attached
Notes to Customer
Monday, October 26, 2009 4:05:05 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that even after using “Save For Web” that you got the same
error message when you attempted to use Photomerge.
I checked the attachments on the case and did not see the files that I
suggested you upload for our engineers to examine.
Could you please attach the files and we will then see if we can solve
your problem.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 3:14:06 PM PDT
Will this help?
Notes from Customer
Monday, October 26, 2009 11:03:21 AM PDT
I tried the work around with the "save for web" and got the same message:
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I can't believe with as many people as are having this problem that Adobe had not developed a solution and released it as a "bug" fi
x. I see that it is also a problem for people using Elements 8 and I can not imagine that is a very good endorsement for your new p
roduct.
Notes to Customer
Monday, October 26, 2009 10:28:41 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you attempt to use the Photomerge feature in
Photoshop Elements that you immediately get the errors:
Error 1: Unable to create Window
- OS error:[1400]
Line: 364
-> var w = new Window(res);
We have seen customer reports of this error and have the matter under
investigation.
Currently, it has been determined to be image specific and isolated to
problems processing the metadata in some images.
Our software engineers have been unable to isolate the exact issue with
these problematic images' metadata and have requested that people who
have images exhibiting this behavior be asked to upload them via the
Adobe Support Portal so that they can be examined.
Fortunately, we also do have a potential workaround that may allow you
to merge your images.
Try the following:
1. Open your images in Photoshop Elements Editor.
2. Save each one using the "Save for Web" command available in the File
menu in JPG format with the quality set to "High".
[This will remove all metadata from the images]
3. Close Photoshop Elements Editor and all open images.
4. Open the images that you just removed the metadata from using "Save
for Web" and use Photomerge on them.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Sunday, October 25, 2009 9:03:21 AM PDT
PLEASE!!!!!!!!!!!!!
Look here
http://forums.adobe.com/message/2275858#2275 858
Notes from Customer
Friday, October 23, 2009 2:42:48 PM PDT
When I go into Elements 7 and select File->New->Photomerge Panorama I get the message
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
and can not go any further. If you look at this on your Forum Site
http://forums.adobe.com/thread/362825 you will note that a lot of other users are having the same problem
or look here
http://www.elementsvillage.com/forums/showth read.php?t=44409
Same thing.
I even notice that people usiong Elements 8 are now having the problem.
Notes to Customer
Thursday, October 22, 2009 11:52:08 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you try to use the Panorama function in Elements,
you receive a message “unable to create window.”
Does this problem happen when you are trying to merge specific images or
does it happen with all images?
What size are the images you are trying to merge? What dimensions, dots
per inch, and file type are the images?
How many images are you trying to merge? Do you have the same problem
if you try merging just two images?
Make sure when you are going to do the photomerge that any extra
programs are closed. The merging process is rather memory intensive so
the less programs running at once, the better.
Try to resize each of the photos to a smaller size, and then retry the
command.
If you receive the error when saving a panorama, try flattening the file
(use the Layer>Flatten Image command), or save the panorama in the
smaller, JPEG format.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Scott K.
Adobe Web Support
Notes from Customer
Wednesday, October 21, 2009 2:47:58 PM PDT
When I try to use the panaroama function I get this message
Error 1; unable to create window
-Internal error
Line; 364
-> var w = new Window(res);
I have tried all the solutions from the forum and they do not work. I even bought a new copy of the program, but no luck.
The function worked before and then stoped working (I had a downloaded version of release 7) That prompted me to buy the new copy A
LL COPIES WERE PURCHASED BY ME
Operating System: Windows XP Home
Has it ever worked? If so, what's changed? (provide comments in description field): Yes
Same results with different file?: Yes
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: No

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

How do I create a guestbook in Dreamweaver CS3, Plz Help....

Hi I want to create a guestbook in dreamweaver cs3 my website is www.freewebzs.com
Also it would be brilliant if you guys could help me and recommend me background colours, is there a free website I can get background colours from?
And also what fonts and colours are most popular for websites.
Im new to dreamweaver as ive just started using it so any advice would be great, thanks

I have to agree with David, if you are new to DW, then creating a guest book will be difficult for you. However, you don't have to re-invent the wheel, there are many guestbook scripts available to save you the time and certainly the headaches :-)
Take a look here for a selection: http://php.resourceindex.com/Complete_Scripts/Guestbooks/
As for colours kuler is good, but you can also look at;
These palettes may help:
http://www.colourlovers.com/palettes/search?hsv=&sortType=rank&sortBy=asc&query= spring&hex=&lover=&hueOption0=&hueOption1=&hueOption2=&publishedBeginDate=12%2F2 7%2F2004&publishedEndDate=04%2F12%2F2009&x=26&y=17
More colour schemes here:
http://www.colorschemer.com/schemes/
For fonts, you are better staying with web-safe fonts that will ensure cross browser compatibility:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Unable to Create New RecordSet in Dreamweaver 8

Hi,
I'm new to databases. I'm trying to create a RecordSet using
Dreamweaver 8. When I go to the Bindings panel and click the "+"
sign and choose RecordSet, I name the RecordSet, I choose a
connection, but there are no tables and the setup dialog box needs
me to choose a table to create a RecordSet.
The problem is when I try to create a dynamic table, I get an
error stating that a cannot create the table without first creating
a RecordSet. Worse, I cannot create a RecordSet without first
creating a table. I'm stuck! How do I create the two if one cannot
exist without the other?
Yes, I have successfully connected to my testing server.

First of all .. what server model? what database are you
using?
There are tables and there are tables. The "tables" you
should see when
creating a recordset are database tables. If you don't see
them in the
recordset window .. what is your connection string? Or is
this a DSN?
the "dynamic table" on the other hand is a table on your page
created from
the recordset and is not the same thing as the tables you see
from your
database. I wanted to make sure you knew the difference.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"sandisi" <[email protected]> wrote in
message
news:fkbuqt$pnd$[email protected]..
> Hi,
> I'm new to databases. I'm trying to create a RecordSet
using Dreamweaver
> 8.
> When I go to the Bindings panel and click the "+" sign
and choose
> RecordSet, I
> name the RecordSet, I choose a connection, but there are
no tables and the
> setup dialog box needs me to choose a table to create a
RecordSet.
>
> The problem is when I try to create a dynamic table, I
get an error
> stating
> that a cannot create the table without first creating a
RecordSet. Worse,
> I
> cannot create a RecordSet without first creating a
table. I'm stuck! How
> do I
> create the two if one cannot exist without the other?
>
> Yes, I have successfully connected to my testing server.
>

Problem attempting to create a purchase order via SRM Portal instance.

Unsing SRM7.0 with PPS; When attempting to create a purchase order via the "Create Purchase
Order" button in SRM Portal instance, after select ECPO type; the following message is show in the screen: "Object or set with GUID 00000000000000000000000000000000 does not exist".
Could you please advise what the problem might be and what to do.Thanks, responds would be very appreciated.Kind regards.
Edited by: ital230 on Jun 30, 2010 10:37 AM
Edited by: ital230 on Jun 30, 2010 11:05 AM

Solve!
The problem was the attributes specialy the BSA.
chekout the attribute should be at highest level and in the user not excluded (grayed).
Also
Define Backend System for Product Category: check that the system for category transfer should be from srm to backend:

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

How to create a Calender in Dreamweaver

I received a calender to put in a webpage made in Microsoft
publisher which seems only work in that program
Soi I am trying to create a calender in Dreamweaver
Anyone have any ideas
Thanks
Text

Dreamweaver is not a click and drag application. You need to build a layout with HTML and CSS code. Or start your project with one of the pre-built CSS Layouts in DW. Go to File > New > Blank Page > HTML. Choose a layout from the 3rd panel and hit CREATE button.
Then use the insert button to add an image to your layout. That said, you must resize and optimize images for the web beforehand using your graphics program (Photoshop). Otherwise, your images will be way too big.
Nancy O.

Creating a subdirectory in Dreamweaver MX

I am trying to create a subdirectory in Dreamweaver MX that
would house images for one of my clients to view. I have a web site
and was trying to link the folder of images to a page in my web
site. Does anyone know how to do this?

right click on your root folder, select "new folder". Name as
"images".
Save your images here.
HTH,
Jon
"superfly349" <[email protected]> wrote in
message
news:e53dhp$pqs$[email protected]..
>I am trying to create a subdirectory in Dreamweaver MX
that would house
>images
> for one of my clients to view. I have a web site and was
trying to link
> the
> folder of images to a page in my web site. Does anyone
know how to do
> this?
>

Attempting to create a rollover in Dreamweaver

Similar Messages

Maybe you are looking for