Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on same NT box.
1) I attempted to install 8.1.6 client first in c:\oracle\ora81, then Forms 6 in c:\oracle\forms6. The installer (3.3.1.2.4) errors, saying forms 6 does not support a multi-home installation.
2) Attmpted to install Forms 6 first in c:\orant. Then installed 8.1.6 client in c:\oracle\ora81. After beginning installation (application user) the following Dependency message displays and the installation is canceled: "Installation cannot continue for the follwoing reason(s). [Oracle ODBC Driver is a single Oracle home product. It is already installed in location c:\oracle\ora81. Oracle provider for OLE DB is a single oracle home product. It is already installed in location c:\oracle\ora81. Oracle objects for OLE is a .... Pracle Provider for OLE is a single home ... You can either de-install these products or install the products in the same location as the single home products."
Click ok and the installation cancels.
How do I install these two products on the same box?

We had to upgrade from 7.3.2 to 7.3.4 when we moved over to Forms
6.0.5.0.2 and it's working fine.
We are using Net 8 as well.
Finn Ellebaek Nielsen (ChangeGroup ApS) (guest) wrote:
: I have problems with Forms 6.0.5.0.2 running against an Oracle
: 7.3.4 with Net8. When trying to insert or update records I get
: an FRM-40508: ORACLE error: unable to INSERT record/FRM-40509:
: ORACLE error: unable to UPDATE record. The Help | Display Error
: menu item shows statement = "S3AVWU3wo|$6o|" (garbled
: message), error = "ORA-12663: Services required by client not
: available on the server" (sometimes it's "ORA-01403: no data
: found").
: It works fine against 8.0.5. As far as I'm aware Forms 6 is
: certified against 7.3.4?
: Any clues?
: Thanks for your help.
: Finn
null

Similar Messages

Unsuccessful attempt to install FORMS 11g

Hello all,
OS: Windows Server 2008 R2 64 bit
DB: 11gR2
These are the steps I took in my attempt to install FORMS 11g:
1) Install JDK6U22 Windows 64 bit
2) Installs wls1033_generic.jar from http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar
3) Installs RCU from http://download.oracle.com/otn/nt/middleware/11g/ofm_rcu_win32_11.1.1.3.3_disk1_1of1.zip (this is the only place where issue arises. I chose everything except Oracle Adaptive Access Manager and Oracle Adaptive Access Manager (Partition Support) because our test environment is NOT Enterprise version). Another possible issue is the zip files - it's for 32 bit; but I can't find 64bit.
4) Installs Fusion Middleware (all 4 files downloaded) starting from http://download.oracle.com/otn/nt/middleware/11g/ofm_pfrd_win_11.1.1.2.0_64_disk1_1of1.zip
5) Patch with http://download.oracle.com/otn/nt/middleware/11g/ofm_pfrd_win_11.1.1.3.0_64_disk1_1of1.zip
6) Configure using Oracle Classic 11g - Home1, Configure Classic Instance (run as Administrator). Here I unchecked PORTAL and DISCOVERER because I just need FORMS and REPORTS.
7) New rule on firewall to allow port 9001.
Issue:
Move my existing 10g FMX to {directory}\MIDDLEWARE\AS_1\FORMS
http://myservername:9001/forms/frmservelet?form=xxx.fmx doesn't come up.
Move my existing 10g FMX to {directory}\MIDDLEWARE\ASINST_1\FORMSCOMPONENT\FORMS
http://myservername:9001/forms/frmservelet?form=xxx.fmx doesn't come up.
http://localhost:9001/console on the server doesn't return anything. But, Oracle Process Manager (asinst_1) service is started.
Any help is greatly appreciated.
Thanks
-andy-

I started the weblogic from Middleware\user_projects\domains\ClassicDomain\startweblogic.cmd. Annoyingly, I cannot close the Command Prompt and not kill the weblogic console. But I am able to get to http://localhost:7001/console.
However, I cannot start WLS_FORMS and WLS_REPORTS from the console with the following error:
For server WLS_FORMS, the Node Manager associated with machine xxx is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.Came across this Forms 11g - Weblogic Server - Command prompts stay open? but did not say how WLS_FORMS got started. The only suggestion I see in that thread was a suggestion for the Command Prompt annoyance; which is, requiring a service account to keep the command prompt running on the service account logged in.
Another thread http://kr.forums.oracle.com/forums/thread.jspa?threadID=933484 seems to suggest just contact Oracle Support and let them set it up.
I did look at the manual http://download.oracle.com/docs/cd/E14571_01/install.1111/e10421/install.htm#BABHJFIC without much help there.
Edit: Started WLS_FORMS by going to Oracle Classic Instance, Forms Services, Start Weblogic Server - WLS_FORMS. http://localhost:7001/console shows the state for WLS_FORMS as ADMIN. I don't know what that means; but I still can't get to http://localhost:9001/forms/frmservlet
Any other suggestions?
Edited by: apex_disco on Nov 15, 2010 12:29 PM

Is there a way to install exe of a vi on an XP machine without LV run-time and not have to restart?

Hi,
I need to deploy an application that reads channels from a FP module for testing purposes. The problem is, I cannot restart the system I need to install this on because it is running critical control software which cannot be interrupted. The system does not have the labview run-time engine and I know installing this requires a restart of XP probably due to registering DLLs or something.
I'm using "Fieldpoint Network Read" to read from the module. The simple answer would be to simply install this on a machine on the same network that I can restart. However, I have no such luxury because I am connecting to the system in question over a long distance VPN connection and I need to be able to poll the data from the FP every 250ms which may be too much for the connection.
So basically, I need to find a way to read data from this FP in a manner similar to "FP Network Read" without restarting the system. Is there any way to do this with labview? Alternatively, I may be able to write this app using LabWindows since I know some software is already running on that machine programmed with that.
Solved!
Go to Solution.

The first thing I'd say is that a restart may not be necessary. I have in the past installed LabVIEW development environment and when asked I said I would restart later. Then I opened LabVIEW and started coding. I'm not sure what it thinks it needs to restart for but it may not be required.
The other thing I'd like to mention is that LabVIEW 7.1 and older can run EXEs without needing to install a run time engine. So it is possible to build a EXE in 7.1, then include some files and DLLs in the same directory as the EXE, and when it is ran it will use them. There's probably issues with talking to DAQ devices without MAX and I have no idea how you address this but it is another possibility.
Of course you already know the best answer and that is to reboot the system when most convenient.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Open second form at run-time (and transfer variables)

Hi,
i'm searching for a method to open a second (maybe attached) form from an existing form at run-time.
The goal would be to have a button in a form which runs a function as click event that opens the second form and transfer field values from the existing form to the new opened form.
To new form should opened in a separate Adobe Reader window because the user should have the possibility to save or print the both forms separately.
Regards

Hi,
check this solution.
http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_2.html

Attempting to install Forms 6i on 10.2.0.1 and SUSE 9.2

1) Downloaded d2k6irelease2.tar from Oracle into /OracleForms6i directory.
2) unTAR'd onto an AS400 running SUSE 9.2 (/app/OracleForms6i/)
3) From /app/OracleForms6i/stage/10gR2 directory executed
/opt/oracle/app/oracle/product/10.2.0.1/rdbms/oui/bin/runInstaller.sh
4) Loaded OUI and pointed to /app/OracleForms6i/stage/10gR2/products.xml file.
5) Progresses to 80% in loading of products.html- then hangs with no further progress.
Any suggestions, etc?

You are trying to use a 10gR2 database Universal Installer with a Developer 6i installation source. After you untar it, cd to the orainst directory and run orainst. If orainst /m does not spawn the motif installer, you have to use the character mode installer. Search the forums for d2k6irelease2.tar and you will see references around the RDBMS error message you will probably see.
There was a Metalink forum note that describes this:
Search on 380046.996.
d2k6irelease2.tar : this is how you start the installer:
I was searching for an answer to this question a few days ago and only found other people asking the same question and not getting a valid answer.
I have managed to start the installer in character mode (I don't have motif installed but apparently this can run under motif).
Download this file to your server and untar it somewhere (eg. /stage/d2k). Then cd /stage/d2k/orainst and run ./orainst
It seems obvious to me now but I was initially searching for product.jar or orainst.sh or an install directory. Hope this saves you some time...

When I attempt to install iTunes I get an error message about Apple Support Service needed to run iTunes.

What is Apple Support Services and where can I get it so I might download iTunes?

Apple Support Services
What's the precise text of the message, please? (There's an Apple Mobile Device Service, and Apple Mobile Device Support, and Apple Application Support ... so it's not clear what you might be having trouble with at the moment.)

After installing update, I repeatedly get message "your computer must be restarted to finish a previous upgrade," and I've restarted several times, and I when trying uninstall receive same message.

Yesterday, I ran an update that was available. This morning when opening the browser, it stated that I needed to retsart my computer to complete the upgrade. I rebootted five times (at least) and it will not start Firefox. I tried uninstalling and planned to reload (apparently losing all of my favorites) and I can't do that--receive same message. I'm using IE today :(

Run the Firefox program once as Administrator (right-click: Run as Administrator).
If that doesn't help then do a clean reinstall.
Download a fresh copy of Firefox ( http://www.mozilla.com/firefox/all.html ) and do a reinstall of Firefox on top of the current version. You won't lose your personal data like bookmarks doing that ([http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]).
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)<br />
You may need to remove the files in the updates and updates\0 folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)

I am getting a runtime error message when attempting to install iTunes.

When attempting to install iTunes I keep getting a Runtime Error! message under the Microsoft Visual C++ Runtime Library. Anyone have this same issue and an idea on how to remedy?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

3 Attempts to Install Failed @ the 41 minute mark!

I have attempted to install SL since the release. It always restarts on its own, then at the 41 minute mark. it fails. Same place all three times. I have a 2GHz Imac, maybe 2 years old. This is the first time I have seen a failure since my 512 when upgrading systems. I have done the utility and checking the disk, everything is OK. I repaired the permissions! Most anyway, what is going on.

John
This may be a long shot, but I notice your signature says you are on OS10.5.1 - is that still correct?
Maybe you could try to upgrade that first using Software Update. That might either get you to a version that will upgrade to SL, or reveal a problem with your present setup.
HTH.

When attempting to install ios5 iTunes starts to backup the iPod but the back doesn't finish and the progress bar keeps moving left to right, any ideas why please?

When attempting to install ios5 on my iPod touch , iTunes starts to backup but doesn't get anywhere and the progress bar just keeps going from left to right, any ideas please as to what I can do? Thanks

Try resetting the iPod while it is connected to your computer.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
Then try again.
If that didn't help, try restarting the AMDS > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

BIP Desktop Install Problem: Run-time error '9' Subscript out of range

Hi All,
I am trying to get my BIP Desktop to work. I have notice previous threads regarding the internet explorer security patches affecting BIP Desktop and my problem is similar. Here is my problem:
1. I installed BIP Desktop 5.7.146.
2. I start Template Builder for Word Language by selecting Start>Programs>Oracle BI Publisher Desktop.
3. A dialog box prompts for UI Language and I select English
In the midst of the Template Builder for Word Language attempting to initiate/change the user interface language to English, it throws the following error:
Run-time error '9' Subscript out of range
Here are some details regarding my PC:
XP sp2, MSXML6, jre1.5.0_15
Also, my CPU performance hits it maximum while I am doing this
Any thoughts on how to correct this?
Thanks,
Patrick

Patrick,
Were you able to find a solution to this problem?
One of my colleagues is having the same issue.
Regards,
Srini

Install Labview DSC Run Time without SQL Express

Hi
I have an application of DSC run time that I tested successfully but now must be installed on a server and my client does not allow install an instance of SQL Server Express because he are already using the Enterprise version. What should I do to not install the SQL Server Express incorporated in the DSC Run Time and use the SQL Server Enterprise already installed on the server?

Hello Jdrendon
Did you try to install your application on a PC with an instance of the Enterprise version?
Maybe another instance of SQL will not be installed in this case, because you already have a later version installed.
The second possibility is just uncheck the option to install the SQL Server Express when you are installing your application.
Let me know if it is possible and if it solve your problem.
Plínio Costa
Application Engineer
National Instruments Brazil

Install Forms 11g FM on Windows 2008 64 bit

Has anyone been able to install FM 11g (Forms etc) on Windows 2008 Server 64 bit.
Every time I attempt an install I get the OUI checking for swap space and monitor configuration. After that the OUI goes away and nothing else happens.
The entries in the installactions file is below.
Using paramFile: D:\Install\Disk1\install\win64\oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 7154 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The commandline for unzip:
D:\Install\Disk1\install\win64\unzip -qqqo ..\..\stage\Components\oracle.jdk\6.0.10.33.0\1\DataFiles/"*.jar" -d "C:\Users\S-OTG~1.MAT\AppData\Local\Temp\2\OraInstall2009-09-22_08-56-31AM"
I have installed the WLS using the 64 bit version of JRockit with no problems.

I reviewed your SR and wanted to clarify a few things. In the SR, you were not exactly told that installing (in general) was not supported on Win2008(x64). You were simply told that you could not use the 32bit download on a 64bit machine or install the Builders on x64. If you were told something else in a call I apologize as that information may have not been correct. Additionally, the SR is very confusing because you go from talking about Win2008 to XP to 2003 back to 2008 and so on. This is a very difficult way to troubleshoot. Dealing with one problem at a time will almost always result in the fastest resolution time. That said, here are the facts based on the platforms you mentioned in the SR.
1. Windows 2008 (64bit): This platform is intended for deployment (server). Although it may be possible to install the Forms/Reports Builders on this platform, Oracle is currently not supporting the Builders on any 64bit platform. Plans to support 64bit Operating Systems for Builders is still under review. So, for now, you must use the 64bit download to install on a 64bit platform. If you choose to attempt the installation of the Builders on this platform, you do it at your own risk.
2. Windows XP and Vista (32bit): These platforms are generally considered "client" platforms. These platforms are supported for using Builders. Technically they are not supported to be used as servers. Therefore, HTTP Server and Web Cache are not supported on these platforms. More details are explained in the Release Notes:
http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
3. Windows 2003 (32bit): This platform can be used with both the deployment components and the design-time components. That said, being a 32bit platform, I would not recommend trying to run a prod system and attempt to develop on it as well. Certainly, doing application maintenance on this machine would be fine, but if you were running a prod environment here, I would not suggest running the Builders full time too. 4gig of RAM or more would definitely be needed. See the following:
http://support.microsoft.com/kb/283037
Now, the actual problems you had/have:
Configuration failing when installing on Win2008 (64) - Looking at the SR, this appears to have been the result of trying to use the 32bit installation on the 64bit box. Upon initial release of the product, 64bit Windows distributions were not available. However, they are now and must be used on 64bit Windows 2008 and 2003 platforms. Refer to the OTN Download area.
Also seen in the error log was a connection issue. This is often caused as a result of several things, but the most common causes are WLS (node manager) is not running or the machine is under powered (usually lack of RAM). Regardless of what is documented, experience shows that a Windows machine will need to have at least 3.5 gig of RAM in order to support the installation process. This assumes that nothing else is running during the installation process unless it is absolutely needed. It seems that 4gig or more offers the most likely chance of a successfull installation on the first attempt.
Regarding the error which suggests that a given service already exists. This could likely happen if you attempted an installation, but it failed then you attempted to re-run the installation without first doing a thorough clean-up.
On the XP installation it appears that there was some memory issues. From the log: java.lang.OutOfMemoryError. As I mentioned, for the most likely chance of success, the machine should have at least 3.5 gig of RAM. If you are just installing the Builders you can have less, but if the config portion fails, you will probably see the connection failure seen in your other attempts. When/if this failure occurs, do not exit or do anything with the installer. Allow a minute or two (or more) for the new instance to completely start then select the Retry option. You will likely find that the configuration will complete successfully.
Also, important for any installation type.... When installing WLS, UNcheck the Launch Quick Start option that appears near the end of the WLS installation. Running this creates a default or demo instance. Unless you are planning to use this example instance, leaving it out can give back as much as 500 meg RAM in some cases. If you have already installed it and don't want to reinstall, stop whatever processes start as a result of that example instance.
SUMMARY
1. Be sure you are installing the correct software for your platform type. 64bit software for 64bit OS
2. On Windows, ensure that you have either installed the Loopback adapter or added your host name to the hosts file. Refer to Section 2.3:
http://download.oracle.com/docs/cd/E12839_01/install.1111/e10421/install.htm#CHDEAAGD
3. Ensure that the machine has at least 3.5 gig RAM. For systems with less, expect to see failures during the configuration portion of the install. Use "Retry" to overcome this.
4. Builders are only supported on 32bit platforms at this time:
http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
5. Ensure that WLS node manager is running before installing FMw
I don't think I missed anything, but just be sure to review the Installation Guide AND the Release Notes.

Attempting to install Creative Cloud Installer crashes my computer

I am attempting to install Adobe products from Creative Cloud using Creative Cloud installer. I am on a Macbook Pro version 10.6.8 Build 10K459 if that helps at all.
When I try to install, the authentication window asking for the admin password crashes and I can't type in the window. When I cancel the download, Finder crashes and the only course of action is to reboot the computer manually via the power button.
I can install other programs which go through the same administrator permission without issue, so I'm quite sure this is not my computer's problem. I have re-downloaded the installer several times to no difference.
One additional detail that may help is that I had trials of Photoshop and Flash Pro on the same computer in the past, which have been uninstalled.
Thank you for any help!!

Just another detail - I was advised to try creating a new user with administrator privilege on my computer, this didn't work either, just had the same problem.

Do I need to install forms 6.0 & reports 6.0 on separate homes

Hello All,
I need to install Oracle developer suite 6.0 & Oracle Developer suite 10g on the same computer.
I have planned to install both on separate homes.
My question is that "Do I need to install forms 6.0 & reports 6.0 on separate homes?".
Regards,
D

Hello,
no, it is not necessary to Install Forms6i and Reports6i in a different Oracle Home.
Francois

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

Similar Messages

Maybe you are looking for