Attempting to restore ipad, recovery starts and then quits with msg saying ipad cannot be restored, error 3014
attempting to restore ipad, recovery starts and then quits with msg saying ipad cannot be restored, error 3014
Try the troubleshooting on this page : Error 3194, Error 17, or "This device isn't eligible for the requested build".
Similar Messages
-
My iPhone became wet at the beach. I put it in rice for 4 days. When I connect to itunes, it says the phone must be restored. It starts and then gives either the error 2001, or 2006. What exactly does this mean, and is it worth getting repaired?
Thank you...http://support.apple.com/kb/TS1275
Water damage isn't covered by warranty, but you could always purchase a refurbished device from Apple. -
My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time' I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
When I try to launch the Itunes app on my Iphone, it starts and then quits right away. What should I do?
I would reinstall iOS 7.
Open iTunes (11.1 or later) on your computer and plug your iPhone into your computer.
Sync your iPhone with iTunes.
Click on your iPhone device and from the Summary Tab, Back up using iCloud and/or iTunes.
On your iPhone, open Settings/iCloud and turn off Find My Phone.
In iTunes, click on the Restore button on the Summary tab next to Check for Updates.
iTunes will completely wipe your phone and reinstall iOS 7.
Setup your iPhone as new and restore from your back up.
Check to see if the iTunes app is functioning correctly and not closing on you.
I did this last night when setting Limit Ad Tracking kept closing Settings and taking me back to the Home screen. After reinstalling iOS 7, the issue went away. -
What happens if I make a picture album on my ipad or iPhone and then sync with my Mac? Will it add a new album to iPhoto on my Mac? Also, what will happen if I add pictures on my ipad to existing albums that I made in iPhoto on my Mac?
ubercoder wrote:
So what I have gleemed from this thread - is that Apple will not help me if an iPad mini is dropped and the screen breaks. I would have lived without the insurance if I could have simply bought a new screen and then had it replaced by Apple.
On something so fragile I would have expected a piece of glass to be a replacement part. But I am glad I made this post because now I no for sure if I break the screen there is no way to have it fixed by Apple and keep it in Warranty.
Yup, kind of like anything else you accidentally break that is more cost effective to replace than to repair. Keep that iPad away from the toddler -
IChat starts and then quits right away...
The title pretty much says it all....
I start iChat/Tiger up and and I see the iChat window briefly (say, 2 seconds or so) and then the application disappears. It does not give an error message and it's process is most definitely dead when I check Activity Monitor. I should note that the iChat previously worked without any problems.
Interestingly enough, it looks like it does successfully log into AIM, because after trying to start the app 10 or so times, I got an AIM message saying that I've attempted to login too many times in too short a period of time.
Any idea what's going on? The only event I can correlate is the fact that I downloaded the newest Tiger security update this past Monday...I believe that is the only change to my computer since it was last working.
Any help is greatly appreciated!Ralph,
I have the same exact problem on two brand new macs, a mac mini and an ibook g4. I tried reinstalling ichat, which made it worse; my buddy list would no longer open, instead, the little black arrow appeared under the ichat logo, and then disappeared after a few seconds. I then copied and pasted that command into the Terminal app, and here's what I got:
2005-08-17 22:32:36.138 iChat[1252] WARNING: Exception while initializing service (null): [NOTE: this exception originated in the server.]
* Object does not implement or has different method signature
2005-08-17 22:32:36.148 iChat[1252] WARNING: Exception while initializing service (null): [NOTE: this exception originated in the server.]
* Object does not implement or has different method signature
2005-08-17 22:32:36.153 iChat[1252] WARNING: Exception while initializing service (null): [NOTE: this exception originated in the server.]
* Object does not implement or has different method signature
223237.348464 Loading hardware rules from hardwarerulesH264-G4.plist
223237.349202 Checking H264 hardware rules
223237.349511 Satisfied rule #4 (30:160x120)
223237.350335 setLocalUserName: Aaron [email protected]
223237.383300 ### NEW STATE: to: VC_INIT, from: VC_INVALID
223237.385628 ### NEW STATE: to: VC_IDLE, from: VC_INIT
223237.390962 ++++++++ confStatusMapRemoveAll
223237.392017 UPnP init passed
223237.392603 NATTraversal created
223237.393258 QT automatic setting = 1
223237.393596 Bandwidth based on QT prefs = 0
223237.419602 BWD: No existing BWD cache
223237.420192 BWD: Launching thread to determine focus capability based on bandwidth.
223237.422392 BWD bandwidth: 0 kbits up, 0 kbits down.
223237.422908 videoNetworkCapable: 0 -- 0 max participants.
223237.423184 audioNetworkCapable: 0 -- 0 max participants.
223237.423492 vcCapabilities returns: 0x00000007
223237.423760 VCCapAudio
223237.423958 VCCapVideo
223237.424145 VCCapMultiAudio
Broken pipe
Do you know what's wrong? I'm really frustrated at this point.
Thanks,
Aaron -
i did an update on my sons iphone 4s and now it says it is in recovery mode and that it can not reboot or restore the phone?! it will not power down normal and keeps saying hook to itunes. all i did was an update and it went into recovery mode and will now not restore! how do i fix this???
Do exactly as it says, connect to a computer running iTunes and restore.
-
help
You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.
-
Workflow Manager Backend services starts and then immediately stops.
I cannot start the Workflow Manager Backend service. It starts and then immediately stops. The event log shows the error "Service cannot be started. System.Security.Crytography.CryptographicException: Keyset does not exist".
This problem may have started when the password for the account that the service runs under expired.
The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
SJT00I cannot start the Workflow Manager Backend service. It starts and then immediately stops. The event log shows the error "Service cannot be started. System.Security.Crytography.CryptographicException: Keyset does not exist".
This problem may have started when the password for the account that the service runs under expired.
The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
SJT00 -
Could someone please tell me why the motion application on my final cut studio starts and then quits? all of the other final cut applications are working. I did a reinstall and the same thing happens. What to do? Thanks. Terrence
What version of Motion are you using and on what machine?
Trying to use a PPC version of Motion on an Intel box will cause the problem you have
Peter -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
iPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen. One time I was able to run the disk utility in time and reformat the hard drive, but the red x ended up appearing again and the hard drive started skipping again.
Is there anything I can do besides get a new hard drive?
P.S. I have also tried the banging on palm/floor trick and it hasn't worked yet for me.There nothing we can suggest to save a bad iPod hardisk, except to try some 3rd Party software to try repair the Hardisk.
The Super Fix for Most iPod Problems
See this earlier post on partition repair using 3rd Party EaseUS Partitipon Master software. -
I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!
http://support.apple.com/kb/ht1212
-
IOS 7 will not load on ipad 2. It starts and then gives an error message. I'm in Florida.
iOS 7 will not load on ipad 2. It starts and then gives an error message. I'm in Florida.
the servers are overloaded at the minute. keep t it and it will download eventually!
-
I'm going from an IPAD1 to an IPAD4. If I back up my IPAD to the cloud and then download to the new IPAD, will it retain game data so I won't have to start my games over?
Welcome to the Apple Community.
Babs5819 wrote:
.....will it retain game data so I won't have to start my games over?
Yes, however you would be much better backing it up to iTunes to do this rather than iCloud.
Maybe you are looking for
-
How do I create more than one navigation button in Adobe Fireworks CS6?
Hi guys, Apologies if this comes across as very stupid question. I am a complete beginner with Adobe Fireworks and I'm in the process of creating my first website and I have got to the stage where I want to create navigation buttons and the book I h
-
Volume for 'IMG ... JPG' cannot be found
As a MAC novice i am having no fun with the above message which has appeared recently when trying to import photo's from a Canon 350D, which up until now has been working fine. At this time the spinning disc then appears and i then have to Force Quit
-
Why is my creative cloud app on windows 8.1 blank, no menu items.
I have a Dell XPS 15 laptop running windows 8.1 When I run the creative cloud app, all I get is a blank window, with no menu items. How can I fix this?
-
Ora-01744 error inappropriate into.
Please help to fix this issue. How do i modify it create or replace FUNCTION BILLING_AMOUNT (p_bill_key IN varchar2) RETURN NUMBER AS l_total NUMBER; l_dum_bill NUMBER; p_count NUMBER:=0; BEGIN BEGIN SELECT count(*) into p_count
-
What is the FCPX equivalent to sequences?
I have a large project, in which I want to work with each sequence on its own. In FCP 7 I would create sequences and work inside those, collecting them in a master sequence. But in FCPX there doesn't seem to be any equivalent, so what do people do?