Attempting to use "backup and Restore" giver error message

In November 2014 I backed up my PC ( see below ) onto  a 2TB ecternal drive ( Lacie).  This ok and can restore.  Spare space 1.2TB
Now when I attempt to Backup again, using Windows Backup and restore, with same settings  I get an error message :
"The requested operation cannot be performed on a file with a user-mapped section open"  This appears after some time of activity. There is no mention of WHICH file causes the problem.  I have repeated with different settings ie with
part backups only, or just one drive only.
The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
I would very much appreciate some advice.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere.  Eventually I succeeded after disabling start menus and uninstalling some programs.  I also disabled my Kaspersky anti-virus completely and disconnected
the internet!!  This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!!  Thank you.  Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

Similar Messages

  • Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on new iMac.

    Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on Firefox on new iMac.

    Firefox 2 versions use the file bookmarks.html to store the bookmarks.
    See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    With Mac OS X 10.4 you can use Firefox 3.5 or 3.6
    * http://www.mozilla.com/firefox/all.html
    * http://www.mozilla.com/firefox/all-older.html
    *http://www.mozilla.com/en-US/firefox/system-requirements.html
    *http://www.mozilla.com/firefox/system-requirements-v3.html

  • HELP! iPhone 3GS stuck in recovery loop and iTunes gives error message" iPod update server can not be contacted"

    As I said, it's an iPhone 3GS (never jailbroken), iOS 4.1, PowerPC G4 OS X 10.4.11, iTunes 9.2. I have had the phone since new, never had any issues with it and am at my wits end trying to figure it out. I have seen many different solutions to this exact problem, but none have worked for me. Anyone have any ideas?

    This is what I posted to someone else having an update issue... Just for your information:
    I having the same issue about the and iTunes says "The iPhone cannot be  restored at this time because the iPhone software update server could  not be contacted or is temporarily unavailable.". I've had the  iPhone  3GS since it came out. It was working fine until I just tried to  update  it. It has NEVER been hacked or jailbroken. WE AND A FEW OTHERS are  having  the same issue then it is more than likely that this is an  update issue.  I took mine to the Apple store and the tech tried to  update it and he came to the same problem and told me he couldn't  update it. My assumption is that we are not the only one's with this  issue and that if  there was a way to update it to the update before  this last one it  might be a solution. I don't know how to get the  previous update. Apple  probably is aware of the problem, and hasn't  come up with a solution yet. Or, enough people haven't complained yet.  The tech suggested that  there might be something wrong with the phone  itself, but that couldn't  be since it was working perfectly before I  updated it and others are  having the same issue. It is highly unlikely  that a lot of people are having the same hardware issue all of a  sudden at the same time. Apple/iTunes needs to fix this... and hopefully soon
    Also:  I can update or restore my iPhone 5 and other iPhones so it is not an  issue with my firewall or other software on my computer. No one touches  my iPhone or my computer they are secure, locked all the time, and I  have no jailbreak software on my computer (Apple tried it and they are  clueless at the moment from what I can tell).

  • Files download 90% and then give error message

    When I download a large file (e.g., video, app) with Firefox 4, the download moves along fine and, when it's almost complete, the download stops and says the source can no longer be found.
    I never had this problem with Firefox 3. Sadly, I now have to use IE when I want to download a file. I don't use IE for anything else and I'd prefer to download files from within Firefox again.

    Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • The backup and restore function in windows 8.1 seems is changed!

    hi,
    I don't see the real backup and restore function in windows8.1 .
    I have  in search entered  backup and I see some other things
    thanks
    johan
    h.david

    Here's an article that will help:
    http://windows.microsoft.com/en-us/windows-8/what-happened-to-backup-restore
    In previous versions of Windows, you could use Backup and Restore to back up your files or create and use a system image backup or repair disc.
    Windows 8.1 gives you choices about how you can recover your PC and back up your personal files.
    Reset or refresh your PC
    If you’re having a problem with your PC, you can refresh Windows without losing your photos, music, videos, and other personal files. You can also start over by resetting it to factory settings. For more info, see
    How to refresh, reset, or restore your PC.
    Back up or restore personal files
    You can use File History to back up the files on your PC in the Documents, Music, Pictures, Videos, and Desktop folders. Over time, File History builds a history of your files. You'll first need to set up a File History drive and turn File History on. For
    more info, see
    Set up a drive for File History. If your original files are lost, damaged, or deleted, you can restore them. You can also browse and restore different versions of your files. For more info, see
    Restore files or folders using File History.
    Use System Image Backup
    You can use System Image Backup like you did in previous verison of Windows.
    To open System Image Backup
    Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click
    Search.)
    Enter File History in the search box, tap or click File History, and then click
    System Image Backup.

  • Backup and Restore in Server 10.3

    Hello all,
    Server 10.3.9
    Mac G4 Tower
    In Workgroup Manager, if I highlight all the users, and select FILE > EXPORT I get the following message:
    http://homepage.mac.com/lintila/export.png
    It says I should use Backup and Restore, but I can not find these functions anywhere...
    I need to reinstall my server, and I want to back up the users... How can I do this?
    Thanks
    Andy

    Does this page contain anything useful?
    (15233)

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • Backup and Restore Error 0x81000010 after Windows 7 join member of domain

    I test windows 7 backup and restore working propery afteer I join this computer to member of domain.
    I got error when I try to run backup and restore Plase see picture below.
    Please kindly advise sloution to fixed this problem.

    I ensure that my user have admin right. I also try this solution but not working.
    To troubleshoot the issue, please try the following steps.
    1. Add the standard user to AppLocker.
    Type Secpol.msc in Search box in Start menu> Application Control Policies > AppLocker > Executable Rules > New hash rule forBackup Operators
    to allow them to use sdclt.exe
    2. Tried to add user in the following GPO:
    Computer Configuration>Windows settings>Security settings> Local policies>User rights assignements> Back up files and directories.
    3. Plug an external hard drive and try to back up information to the driver for a test.

  • Windows 7 Backup and Restore error code 0x80070013 The media is write protected

    I have had a problem using Windows 7 64-bit Backup and Restore on two different brand new PCs. After setting up a backup to a WD MyBook 500GB external USB hard drive and performing the initial backup succesfully, when it tries to do another backup I am
    getting a "The media is write protected, (error code 0x80070013) " error. I have even tried to reformat the external drive with no luck in solving the problem. In doing some web searching I did come across someone with a similar problem running a Windows 7
    beta last year that appeared to have be fixed by an beta update. Any help would be appreciated. Thanks

    Hi,
    Please try this:
    1)   
    Click Start and type: diskmgmt.msc in Start Search box.
    2)   
    Open Disk Management, right click on the external hard disk.
    3)   
    Click Properties and click Policies.
    4)   
    Check “Better performance”.
    5)   
    Click OK.
    Then backup again.
    Resource:
    When I tried to backup my files, I recieved an error
    (0x80070013) saying that media is write protected
    Best Regards
    Dale
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Can I backup and restore my itunes media using a hard drive?

    Can I backup and restore files if I used a hard drive?
    I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
    Thanks!

    The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
    RealDave

  • Has anyone sucessfully used the new Winclone 3.2 to backup and restore  Bootcamp partittion with Windows 7 Ultimate on MBP with Lion 10.7.3?

    Bought late 2011 MBP 17" with Bootcamp partition (Windows 7 Ultimate) and Lion OS 10.7.3
    I am trying to make a backup of Bootcamp partition before I start using my laptop but it proves to be a difficult task.
    I don’t have any installation disk for Windows 7 and I am afraid that, if a disaster strikes and I loose the HDD, my copy of Windows will be gone. 
    The only way to restore Windows partition according to what I read so far is to do the following:
    • Use Windows to backup data from BootCamp Partition
    • Reinstall OS Lion formatting full hard drive in the process
    • Use BootCamp Assistant to create BootCamp partition
    • Install Windows 7 on bootcamp partion
    • Use Windows 7 to restore data from backup file created in the first step
    The only problem is that I don't any image or disk to re-install Windows 7. With Windows 7 I can create only 'repair disk' (for what it is worth) or system image but according to other users it would format the whole drive including OS Lion partition when reinstalling
    Winclone 3.2 seems like the answer to my prayers but would like to hear from the users if it worked for them (most imprtantly, did the restore work?). 

    Got the response from Winclone regarding my confusion in step 18 of the procedure to create bootcamp backup.  The message displayed on the screenshot under step 18 can be ignored.  It refers to creating a Windows partition using Boot Camp Assistant but in fact this partition has already been created in earlier steps using Disk Utility. 
    I bought Winclone 3.3 as it promises to make backup and restore of Bootcamp partition with Windows 7 on it really easy, the steps to do this task are easy and well documented, and the owner of the program was very prompt responding to my queries.
    I performed the following as an insurance against disaster prior to creating Winclone image:
    Since my Windows 7 came pre-installed but without any installation disk I used Windows 7 to create 'Windows 7 system image' . From what I read on forums the system image created using Windows 7 apparently can't be used to easily restore Boot Camp partition (as it wipes out OS X in the process).  I created this image as a last resort backup rescue - some users reported that it can be used to recover Windows but the process is painful and involve a number of steps, swapping hard drives, and paid software to assist in the process.  I did not bother to make notes on this process - thanks to Winclone I am not suppose to need this backup if everything works as promised
    I also created 'Windows 7 repair disk' prior to running Winclone.  Not sure what the value of it will be but again, this is something I did just in case I need it in the future
    Then I installed Winclone 3.3 and created Windows 7 Ultimate Boot Camp image without any problems (on MBP running Lion 10.7.4).  My Winclone image file of 150GB Windows 7 Boot Camp partition prior to installing any programs and without any data on it ended up being nearly 8GB (saved to the external USB HDD).
    I have not restored and don't plan to restore the Winclone 3.3 image just to test if it works (don't want to risk loosing my perfectly well running Windows 7 in case of any disaster).  So ultimately only time or experience of other users will tell me if I spent my money well buying Winclone 3.3.  I  know it worked for you JBLTZ so hopefully it will work for me when I need it one day.
    Cheers
    Swavek

  • HT1414 Ipod Touch can't find Bluetooth device. (Jam Box)  Upgraded Itunes software did a backup and restore on the Ipod.  My PC sees it fine.  IPod used to work with JamBox.  Reset Jambox, no luck. Followed every instruction from the forums. Still no luck

    Ipod Touch can't find Bluetooth device. (Jam Box) 
    Upgraded Itunes software did a backup and restore on the Ipod.
    My PC sees Jam Box fine.  IPod used to work with JamBox.  Reset Jambox, no luck.
    Followed every instruction from the forums. Still no luck.
    Reset Jam Box to factory settings. 

    Did a network reset on the Ipod after the backup and restore.  No luck

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

  • HT1212 iPhone diabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). Now what to try to reset iPhone?

    iphone disabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). How to restore iPhone?

    Try here   =   http://support.apple.com/kb/TS3221

  • Synchronization Issue backup and restore errors

    Hi,
    I have implemented synchronization in local on two instances and worked well for me. But when I am trying to implement the same in Prod server, it is giving exception backup and restore errors. Please let me know, is it possible to implement Synchronization
    on same server in two different instances ?
    Thanks,
    Moorthy

    Hi Moorthy2015,
    According to your description, you get issue when sychronizing SSAS database server. Right?
    In Analysis Services, it is supported to do sychronization for SSAS databases between different instances on same server. We can also sychronize two different SSAS servers. So in this scenario, you can do sychronization between Pro server and Dev server.
    Please refer to links below:
    How to synchronize two SSAS Servers
    Synchronization with Microsoft SQL Server Analysis Services
    If you issue still persists, plesae share some detail information about the error.
    Best Regards,
    Simon Hou
    TechNet Community Support

Maybe you are looking for