Attempting to use Clearwire for iChat A/V

Clearwire is a new wireless ISP. We are attempting to use the service to hold audio and video chats. All of our iSights work fine inside and outside or WAN, I even telecommute using iSight from home. We are testing the Clearwire service for portable data connectivity in out remote television production truck. Clearwire allows us to use the test chat, but not audio or video. What ports need to be opened on the Clearwire system for video and audio to work?
Thank you,
Shawn Bockoven
METV EBS Station Manager

Hi Shawn,
iChat uses these ports an these Protocols.
TCP
5190 for AIM Login
5298 for Bonjour
5220, 5222, 5223 for Jabber stuff
UDP
5060, 5190, 5678, 16384-16403 for AIM (Mac to Mac Jabber A/V chats will also use some of these).
5297, 5298, 5353 for Bonjour.
See table here. Scroll down just below the planes.
Your main problem is that ClearWire is reported to block port 5060 and prevents iChat being used. They seem reluctant to anything about this.
It may be because they offer a VoIP phone service. Unblocking this port would allow Users to purchase other equipment/services.
10:11 PM Wednesday; March 22, 2006

Similar Messages

  • Attempting to use bluetooth for the first time, and it never sees any other devices

    I have an iPad 2 about a year old, running iOS 6.0.1.  This morning I tried to connect to another iPad, over bluetooth, and neither iPad is able to discover the other.  This is the first attempt to use bluetooth on either of these iPads.  The other iPad is also running iOS 6.0.1.  The iPads were less than 10 feet apart.
    On both devices, I went to settings:bluetooth, and turned blutooth "on".  This opened up a "Devices" box, which says "Searching...", with a spinning wheel icon. Below this box is says "Now discoverable".  Both devices remained in this state.
    I haven't used bluetooth before so I have no idea what I am doing wrong.
    Later in the day I fiddled with the bluetooth systems prefs panel on my desktop (a circa 2005 intel mac running OSX 10.6.8).

    (hadn't finished my earlier message but somehow it posted it before I was ready).
    From the OSX bluetooth panel, I turned bluetooth on, and made my computer discoverable.  I then hit "setup new device", and was taken to the Bluetooth setup assistant.  After a few seconds it showed me my ipad as one of the devices it had discovered.  Over on the ipad, though, it did not discover the desktop machine.
    After about a minute, I then selected the ipad from the list of devices on the desktop machine, and hit "continue".  At this point it said "attempting to pair with MyIpad", and "connection established".  At the same time, a panel popped up on my iPad, listing my desktop machines name, and asking for a PIN.  It is not clear to me whether it is asking for a PIN that I have supposedly set up on the desktop machine, or if it is asking me to establish a PIN.  So I quit.
    In any case, my goal in going through this attempt on the destop machine was solely to establish whether the bluetooth hardware is working on the ipad.  I believe that has to be true.
    So, can someone explain to me what steps I am *supposed* to go through to pair up two ipads over bluetooth?

  • Using dbms_job for the 1st time

    I am attempting to use dbms_job for the 1st time and doing some test, but I can't get it to run.
    Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production
    SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 1 10:36:18 2006
    I have alter system set job_queue_interval = 10;
    When I tried
    SQL> alter system set job_queue_interval = 10;
    alter system set job_queue_interval = 10
    ERROR at line 1:
    ORA-25138: JOB_QUEUE_INTERVAL initialization parameter has been made obsolete
    my code is as below.
    1 create or replace procedure d1 is
    2 v_job_no binary_integer;
    3 begin
    4 DBMS_JOB.SUBMIT(
    5 v_job_no,
    6 'test_dbms_job',
    7 trunc(sysdate,'hh')+1/24,
    8 'trunc(sysdate,''hh'')+2/24');
    9 commit;
    10* end;
    SQL> /
    Procedure created.
    SQL> exec d1;
    BEGIN d1; END;
    ERROR at line 1:
    ORA-06550: line 1, column 107:
    PLS-00103: Encountered the symbol "END" when expecting one of the following:
    := . ( @ % ;
    The symbol ";" was substituted for "END" to continue.
    ORA-06512: at "SYS.DBMS_JOB", line 79
    ORA-06512: at "SYS.DBMS_JOB", line 136
    ORA-06512: at "PMC_ERP_PROD.D1", line 4
    ORA-06512: at line 1
    Any clues??

    sorry, when I cut and pasted this I but in
    job_queue_interval in twice.
    I alredy have the following set also.
    SQL> alter system set job_queue_processes = 4;
    System altered.Well, it's good...
    And what about semicolon ? ;-)

  • Why did AIM for Ichat suddenly return an error?

    I was using AIM for iChat earlier this morning and everything was working fine. Then suddenly, without warning, it logs out of every iChat account and returns the error: "An internal error occured that disconnected you from all iChat services. To resume iChat, log in again to your instant messaging account." I can log into my bonjour and jabber account, but as soon as I try to connect to AIM, it brings them all offline. I went to AIM.com and signed in and have been using the web client since, but apparently this has happened to about half of my friends on iChat. Why would this be and what can I do to fix it?

    Hi,
    Now and then the AIM Servers have a blip and many people seems to get kicked Off Line.
    I have server accounts/AIM IDs and keep some using SSL and the api.oscar.aol.com server on port 443 and some using the login.oscar.aol.com server on port 5190 without SSL.
    Usually it only effects one group of my logins and not all of them.
    It can of course be a server local to you that is having issues.
    10:48 PM      Sunday; February 26, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Smallest / Highest quality DV Cam for iChat

    I'm looking to help my father setup an iChat "station" (hooking his mac mini to his plasma monitor in living room). After using iSight for a long while, I realized I would be much more comforatable having an iChat from my couch, so I hooked up my camcorder, and away I was, zooming, changing exposure, etc. I use a Sony DVR-PC105 digital video camera (camcorder) with my iChat. I'd like it if we could find a camera that fit the following "restraints":
    -very small size (ideally we can mount it tucked behind the monitro, or in the wall?)
    -very high quality (high quality optics, good optical zoom, etc.)
    -firewire out (of course there are ways around this in using usb for iChat, but I want the quality)
    -color
    -OSX compatable (or at least works in OSX)
    -can be either permanent (mounted), or temporary (on a sort-of tripod, and can be used for shooting family videos, etc.)
    Of course we could just buy a small Canon or Sony camcorder, but I'm wondering if there isn't something out there that's smaller, with the same quality. I looked at the JVC HD (hard drive) cams, but apparently only USB out.
    Anyone have any thoughts on what camera might work best for this?

    Hi David,
    Apple has this http://www.apple.com/macosx/upgrade/camcorders.html
    It used to be an actual list but now there are so many.
    11:18 PM Wednesday; June 21, 2006

  • Why is my Apple ID being locked out every time I go to use it?  I haven't even attempted to log in for about 4 or 5 days, but today on my first attempt to do so, it said my account had been locked for security reasons.  This is the third time.

    I only sign in to iTunes' store about once a week or so.  But during each of my last 3 attempts (on different days, several days apart) on my first attempt to enter my password and hit submit, I am immediately told that my Apple account has been locked for security reasons and it wants to take me to a page to reset my 'forgotten' password.  I am using the CORRECT password.
    Perhaps someone else is trying to break into my account or is mis-entering theirs but my account should not be getting locked like this.  It is very frustrating to have to go through the reset password procedure each and every time I want to go into the store.  It seems to me that Apple really doesn't want me to buy any more apps from them as they keep refusing me entry into my own account, each and every time I have tried to use it, for the past few weeks.  I am not their best customer, but they aren't giving me much of a welcome invitation to become one, if I'm going to be treated like this.
    I just bought my iPhone 4 less than 2 months ago.  I paid extra money to upgrade early, just to get this phone because it was so highly recommended by everyone I spoke with in different stores (BestBuy and Verizon).  I even bought the 2 year upgrade to my Apple services in case I needed to ever call them, and so far I haven't had to, yet.  But I definitely will call them if this isn't straightened out.
    It looks like this other user could be tracked and an email could be sent to them from Apple to let them know what they are doing - trying to sign into the wrong account, and are locking somebody else out of their own account because of their error....and to remind them of their correct information or how to get it and to write it down or save it somewhere so they don't keep on doing this.
    I have seen literally DOZENS of other people in these discussions with exactly the same issue that I'm having so it is NOT an isolated incident, and it seems to be a growing problem as Apple's sales and user base continues to grow, so this problem is seriously needing to be addressed in some way, and soon, before they start losing new customers because of it.  If I was still within my original 14 day return period with this phone, I would definitely be returning it and buying an Android model because of how frustrating this is to me.  If my bank was doing this to me, I'd have already switched banks by now if they hadn't fixed it - just to give an example of how I feel about this.

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • I am attempting to use my new adobe photoshop elements 12. I asked for a serial number per instructions, typed in the serial number and am being told it's not valid- please help.

    I am attempting to use my new adobe photoshop elements 12. I asked for a serial number per instructions, typed in the serial number and am being told it's not valid- please help

    First make sure you are using the correct code for the serial number.  To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
    https://redeem.licenses.adobe.com/getserial
    If you still have a problem you can contact Adobe Support using chat and they might be able to assist you.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • TS3274 My friend's iPad has not been used for several weeks. When I first turned it on, asked for a four digit pass code. After several wrong "guess" attempts it kept asking for more, with a note saying I cou

    It on, it asked for a four digit pass code. After several guess attempts, making me wait for an hour to try each time, I gave up. The next day, it asked me to connect to iTunes. I remain locked up with that request. I've re-booted several times and get same request.
    Advice!! Help!

    You have to reset the iPad using iTunes if you can not remember your passcode.
    http://support.apple.com/kb/ht1414

  • When I attempt to use software Update, and am then prompted for my Apple ID and password, my apple ID is not complete and it is 'grayed out' so I cannot change it.

    When I attempt to use Software Update, then go to 'Update All', I am then prompted to enter the password for my Apple ID, however my Apple ID does not come up as complete, and it is 'grayed out' and I cannot change it, therefore it is impossible for me to update my software.  How can I change the Apple ID to the correct ID?

    You need to delete the application and then download it from the desired Apple ID.
    (96010)

  • Use Camcorder for iMovie and iChat?

    Hi,
    I want to find a way to be able to plug a video camera into my iBook to use with iMovie and iChat.
    I'm having a difficult finding a definitive solution in finding a webcam to use with my iBook.
    Does anyone know if a firewire camcorder will work with iMovie and iChat? (iBook, 500mhz, 384mb RAM, running Panther.
    Thanks very much,
    Ted

    Hi Ted,
    In addition to Tom's good comments, here are a couple of other things that may be of interest.
    I would suggest you select a Mini-DV camcorder that claims Mac compatibility with Panther (OS X 10.3.9). Some other camcorders may not work easily with at least one of the two apps you specify. For instance, if you decide to get a Canon Mini-DV, see this Apple article concerning a possible FireWire Issue With Some Canon Mini-DV Cameras.
    If your 500mhz iBook has a G3 processor, its processor power falls below Apple's minimum iChat AV: System requirements (for iChat 2.1 video). (Mac OS X 10.4: iChat AV system 3.x requirements are different.)
    iChatUSBCam can allow slower G3s to work with iChat AV, although you may experience less than smooth video performance. iChatUSBCam is try-before-you-buy software, so you can determine whether it meets your needs before you pay for it. See the web site for FAQs, an explanation of all of iChatUSBCam's features, and camera compatibility if you need iChatUSBCam.
    Jim
      Mac OS X (10.4.7)    G5 DP 1.8

  • Anyone use M-Audio FireWire Solo for iChat AV 3.1 audio output?

    Using an up to date iSight, audio output for iChat AV 3.1 works perfectly through my G5 internal speaker but does not work through my FireWire Solo. It yields 100% digital distortion everytime the person on the other end speaks. Everything else in my setup works beautifully with my M-Audio device (Logic Pro, Pro Tools, Reason, iTunes and all other applications). M-Audio is looking into it, but does not have an answer yet.
    Powe Mac G5   Mac OS X (10.4.3)  

    Hi,
    Checking olderpost I found your had been missed.
    Add-on Capture cards for Video and MIDI audio devices have to have the most recent drivers.
    I would alos recommend setting up MIDI devices with the MIDI Set Up Utility found in Applications/Utilities
    Ralph

  • Risks when using DV camcorder for ichat video conferencing..

    I have a sony dcr pc350. Bought it January of this year and havent had problems with it until recently. For some reason, the video head was damaged. When i play my DV tapes on it, thick gray horizontal lines appear, or sometimes it refuses to play the tapes completely. I just recently read one of the topics in the ichat AV FAQ and it mentioned that there's a risk that using a DV camcorder for ichat AV video conferencing can actually damage the camcorder. Now i'm wondering if that's the reason why my dv cam is damaged now. I haven't been using it to shoot some video footage for a while now, but i have been using it to video conference very often for about over a month now. And then recently, when i had to use it to shoot some video, that's when i saw that the camera needed repairs. As i've mentioned, I havent been using it for anything else (not even to shoot video) and i havent dropped it or anything. I pretty much take good care of it. So i'm thinking that it was my constant use of it for video conferencing that did the damage.
    So my question is:
    Has anyone else experienced some camcorder damage that might be related to frequent video conferencing use? If it does indeed damage the camcorder, what specifically does it do to it (what does it damage, how exactly does it cause the damage, etc...)? I'd like to know so I can be more specific when I bring it to the service shop for repairs.

    Hello Albert,
    I do NOT think that using your Sony with iChat AV poses any greater risk than using it for other things.
    I used my Sonys (DCR-TRV17 and DCR-TRV70) for a while, but I switched to iSight before I damaged them. (I am clumsy.)
    The kinds of damage I contemplated in the iSight vs Camcorder or other web-cam FAQ were:
     - dropping or tipping the camera or the tripod upon which it was mounted,
     - contamination from dirt, body oils, or dust, etc.,
     - wear on the heads and internal moving components, and
     - wear on the camera's electrical connections.
    Moreover, regular professional clean and adjust is required for my Sonys based on usage hours. Such is NOT required for iSight.
    Some of those risks can be mitigated by careful placement and use and by keeping the tape out when using the camera, but some risk always exists when using the equipment. My thought was that, if I wore out or damaged a camera by using it for hundreds of hours of video chat, I would rather wear out or damage iSight, which is cheaper than my Sonys were.
    Please post back what your Sony Service Tech finds. I will be eager to read whether your camera needed more than a professional clean and adjust.
    EZ Jim

  • Signed up for 30 free trial of Pro version, but when attempt to use am only told to subscribe to $20 month service.

    Help!
    Signed up for 30 free trial of pro version, but any attempt to use merely advises to sign up for $20 monthly service and will not work further.  What do I do?
    Merrill

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html
    Regards
    Rajshree

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • Anyone using M-Audio FireWire Solo for iChat audio output?

    Audio output for iChat works perfectly through my G5 internal speaker but does not work through my FireWire Solo. It yields 100% digital distortion everytime the person on the other end speaks. Everything else in my setup works beautifully with my M-Audio device (Logic, Pro Tools, Reason, iTunes and all other applications).

    You have landed in iSight Discussions. You may find better help in the Expanding your Power Mac G5 Discussions or iChat AV 3 Discussions area.
    I do not use M-Audio or any of the other things you post about except iChat AV, and iChat AV does NOT work through my DP G5's internal speaker.
    I offer the following possibilities for your consideration if you cannot find better help:
    (0) When using iSight or iChat AV, you may be experiencing Possible hardware or software conflicts. This link gives tips for investigating that possibility.
    (1) You may be trying to use M-Audio FireWire Solo for other than its intended purpose. The web site states, in part: The FireWire Solo is designed from the ground up as an easy-to-use, high-quality interface for songwriters to record guitars, vocals and more on the computer.Perhaps your M-Audio's documentation or the "Support" information linked on the web site can help you determine whether your device is compatible with iChat AV and your other AV equipment.

Maybe you are looking for