Attempting to use Ultrabeat...and no Tutorial Drumset

I am trying to learn patiently using the Plug-in Manual documentation in the help menu. It asks me to load a Tutorial Drumkit listed in the "settings" folder in Ultrabeat.
does this mean the pulldown menu where such drumkits as "Deep trance Kit" which is a pulldown menu below the Bypass switch?? If so, This Tutorial drumkit doesn't exist! Anyone know where to find this kit? Thanks.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere.  Eventually I succeeded after disabling start menus and uninstalling some programs.  I also disabled my Kaspersky anti-virus completely and disconnected
the internet!!  This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!!  Thank you.  Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

Similar Messages

  • How do I use Ultrabeat and other plug-ins

    I have a triton LE, MOTU 828, and an M-Audio MIDISPORT 2x2. I just recently got Logic pro running but I can't seem to be able to record the loops that I create with Ultrabeat. How do I record them??? Do I need to bus or send them? If so, how do I do that?

    How do I record them??? Do
    I need to bus or send them? If so, how do I do that?
    Solo the track you want to record (ultrabeat). go to File> Bounce...set start and end position of the loop and then bounce it. Then you have a loop you can import back into Logic or where ever you want to use it. Hope this helps....
    PowerBook G4 1gig   Mac OS X (10.4.3)   768 mb DDR SDRAM
    PowerBook G4 1gig   Mac OS X (10.4.3)   768 mb DDR SDRAM

  • Attempting to use "backup and Restore" giver error message

    In November 2014 I backed up my PC ( see below ) onto  a 2TB ecternal drive ( Lacie).  This ok and can restore.  Spare space 1.2TB
    Now when I attempt to Backup again, using Windows Backup and restore, with same settings  I get an error message :
    "The requested operation cannot be performed on a file with a user-mapped section open"  This appears after some time of activity. There is no mention of WHICH file causes the problem.  I have repeated with different settings ie with
    part backups only, or just one drive only.
    The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
    I would very much appreciate some advice.

    Hi and thank you Mandy.
    After many failed attempts - even backing up a few files to test - I was getting nowwhere.  Eventually I succeeded after disabling start menus and uninstalling some programs.  I also disabled my Kaspersky anti-virus completely and disconnected
    the internet!!  This time the backup and system image appeared to be OK .
    You have helped, Mandy, by identifying the anti-virus as a possible culprit!!  Thank you.  Next time I backup I will just
    temporally disable it and see what happens.
    Kind regards
    Malcolm

  • Do you copyemail from a PC running windows live mail? I have attempted to use Thunderbird and was successful in converting the live mail files to Mbox format but when I tried to import these files to the Mac only one message from each file was shown.

    I am having a problem trying to migrate some old email messages from a PC running Windows live mail.
    I downloaded Thunderbird to the PC and imported the email messages and folders into Thunderbird and was able to create Mbox files for all the folders and messages. I  copied these files to a usb stick and then tried to export the folders and messages to my iMac running Lion. It appeared  to copy the folders to the Mac but only one message per folder was placed on the computer. Does anyone have any ideas on how I should proceed to copy these email messages over? Thanks.

    I am having a problem trying to migrate some old email messages from a PC running Windows live mail.
    I downloaded Thunderbird to the PC and imported the email messages and folders into Thunderbird and was able to create Mbox files for all the folders and messages. I  copied these files to a usb stick and then tried to export the folders and messages to my iMac running Lion. It appeared  to copy the folders to the Mac but only one message per folder was placed on the computer. Does anyone have any ideas on how I should proceed to copy these email messages over? Thanks.

  • Using PWM and digital outputs of myDAQ to power multiple solenoids

    Hello,
    I am attempting to use LabVIEW and myDAQ to power 3 independent solenoids with PWM. I am new to Labview, so I am having trouble grasping the best was to use a digital output to power my solenoids. I have many codes to generate PWM to digital output, but I cannot figure out how to actually power my solenoid from these signals. Any help would be greatly appreciated. 
    Zach

    Google ULN2003 which is a relay/solenoid driver chip. The digital outputs of your card feed to the inputs of the chip, Review the max current/voltage specs of your solenoids and compare to teh driver chip max ratings to ensure the chip can power them.
    How fast do you plan to PWM the solenoids? Can they achieve your PWM rate?
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4) and attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and need assistance

    I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4).  The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices.  Please advise.

    I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?

  • I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

    I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

    I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"

  • Attempting to use bluetooth for the first time, and it never sees any other devices

    I have an iPad 2 about a year old, running iOS 6.0.1.  This morning I tried to connect to another iPad, over bluetooth, and neither iPad is able to discover the other.  This is the first attempt to use bluetooth on either of these iPads.  The other iPad is also running iOS 6.0.1.  The iPads were less than 10 feet apart.
    On both devices, I went to settings:bluetooth, and turned blutooth "on".  This opened up a "Devices" box, which says "Searching...", with a spinning wheel icon. Below this box is says "Now discoverable".  Both devices remained in this state.
    I haven't used bluetooth before so I have no idea what I am doing wrong.
    Later in the day I fiddled with the bluetooth systems prefs panel on my desktop (a circa 2005 intel mac running OSX 10.6.8).

    (hadn't finished my earlier message but somehow it posted it before I was ready).
    From the OSX bluetooth panel, I turned bluetooth on, and made my computer discoverable.  I then hit "setup new device", and was taken to the Bluetooth setup assistant.  After a few seconds it showed me my ipad as one of the devices it had discovered.  Over on the ipad, though, it did not discover the desktop machine.
    After about a minute, I then selected the ipad from the list of devices on the desktop machine, and hit "continue".  At this point it said "attempting to pair with MyIpad", and "connection established".  At the same time, a panel popped up on my iPad, listing my desktop machines name, and asking for a PIN.  It is not clear to me whether it is asking for a PIN that I have supposedly set up on the desktop machine, or if it is asking me to establish a PIN.  So I quit.
    In any case, my goal in going through this attempt on the destop machine was solely to establish whether the bluetooth hardware is working on the ipad.  I believe that has to be true.
    So, can someone explain to me what steps I am *supposed* to go through to pair up two ipads over bluetooth?

  • HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears  The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

    i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
    The SIM card inserted in this iPhone does not appear to be supported
    This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

    It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
    How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

  • I have an Iphone 4S on ios7.0.3 and am attempting to use airplay with an airplay enabled AV receiver from Pioneer (VSX-53). I also recently upgraded my wireless router. I no longer get the airplay icon on my iphone? Any suggestions?

    I have an iphone 4S on ios 7.0.3 and am attempting to use airplay with an airplay enabled AV receiver (Pioneer VSX-53). I also recently upgraded my wireless router and the roouter is working fine with the five elements on the network. Prior to the upgrade to 7.0.3 and the router upgrade the airplay feature working fine and i was able to consistently use airplay to stream music th the AV receiver. After the upgrades the airplay icon no longer appears on my iphone or on my macbook running itunes. Any suggestion on how to trouble shoot the missing airplay icon is much appreciated.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I am attempting to use my new adobe photoshop elements 12. I asked for a serial number per instructions, typed in the serial number and am being told it's not valid- please help.

    I am attempting to use my new adobe photoshop elements 12. I asked for a serial number per instructions, typed in the serial number and am being told it's not valid- please help

    First make sure you are using the correct code for the serial number.  To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
    https://redeem.licenses.adobe.com/getserial
    If you still have a problem you can contact Adobe Support using chat and they might be able to assist you.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • When I attempt to use software Update, and am then prompted for my Apple ID and password, my apple ID is not complete and it is 'grayed out' so I cannot change it.

    When I attempt to use Software Update, then go to 'Update All', I am then prompted to enter the password for my Apple ID, however my Apple ID does not come up as complete, and it is 'grayed out' and I cannot change it, therefore it is impossible for me to update my software.  How can I change the Apple ID to the correct ID?

    You need to delete the application and then download it from the desired Apple ID.
    (96010)

  • Developer-Online New Tutorial Released: Create a Flickr gallery using jquery and JSON

    Create a Flickr gallery using jquery and JSON
    Hello everyone, In this tutorial I'll show how is simple to build your Flickr photo gallery using jQuery framework and JSON. We'll see how to setup thumbnail's numbers, convert your RSS Flickr in a JOSOn format and display theme. Thank You for your attention!
    Posted on:                                       2010-01-11 10:20:48
    Author: patrizio Quatrini
    Best Regards
    Waleed Barakat

    Heya,
    When I first read your post I originally thought you were posting a tutorial about whether a chosen username has already been resigtered or not on the signup page like this tutorial:
    http://DwFAQ.info/signup_demo.php
    Spry Check Username Availability
    Date Created: Sunday, July 5, 2009 2:29 PM
    Then after looking at the page you've linked to and trying to understand the objective of the tutorial I've noticed that you are talking about something like this:
    http://DwFAQ.info/home.php?id=7
    Spry Search
    Date Created: Sunday, March 1, 2009 8:51 PM
    It's pretty simple to do with the link I've referenced. Simply create your database with populated tables, use the mentioned script to convert the database data into xml syntax, then enter your dynamic database script as the location of the xmlDataSet in the spry page linked.
    View source on this page which shows the non-destructive filter in action to see how it's done! You can also spice it up a little for products, etc. by using this method. The key is to create a dynamic xml syntax from your database and then use the dynamic xml script location as your xmlDataSet in the search page.
    I have an example of the auto suggest search on my homepage http://DwFAQ.info
    On the top-left side of the page click on the link that says Search Tutorials to reveal the search form. Then start typing characters into the search box to see the entries instantly filter according to the characters that are typed. You can also filter further by clicking on the category checkboxes to filter by keywords AND category.
    You can view the source code on my homepage to see the location of the dynamic xml syntax referenced as the xmlDataSet location and how it was implemented into the site.

  • I switched to Apple Mail in the last two months.  When I attempt to print an email message, I get a blank piece of paper.  When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened.  Any ideas?

    I switched to Apple Mail in the last two months.  When I attempt to print an email message, I get a blank piece of paper.  When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened.  Any ideas?

    Which version of Mail are you using as well as which Snow Leopard version you are using? 

Maybe you are looking for