Attempting to work with documents and sandbox

I am working on a document organizer and I am trying to integrate such features into the sandbox model. However I have run into a snag - the app cannot access ~/Documents or if a user has dropbox ~/Dropbox. From the list of entitlements it does not appear there is any way for me to scan these directories regularly to allow the user to view them. If a user adds the files using the File interface, it requires many steps and is not seamless. For now there is the temporary entitlement to access and write files and directories relative to the users home. However I do not imagine this will last for long. So I am not really sure how to proceed. Has anyone else had a similar situation, how did you get around this liitation?

Does anyone know how to fix this?
Upgrade to Aperture 3
Seriously Aperture 2 has been marginal ever since Lion came out. People have been able to get it to limp along but there have been major issues. That is has worked at all till now is somewhat amazing.
If you continue to try and work with Aperture 2 in Mavericks make sure you have good working backups of your libraries. There is a chance that using 2 with Mavericks will corrupt your libraries.

Similar Messages

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

Working with documents via BEx Analyzer not using the portal

Hello,
i read that we are able to create (work) with documents (comments) via
BEx Analyzer. When i want to add a comment how it is described in the
help we get connected to the portal. We dont want to use the portal for
that. Therefore we searched a way to skip the portal. We read that in
BW Versions before 7.0 the portal was not connected but since 7.0 we
have the portal connectivity, but it should also possible to not use
the portal and to access directly the BI Server. I searched for the
Customizing to do so but i could not find it where to switch to the old
logic.
And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
Can anyone give me a hint?
Kind regards,
Murat

Hi Murat,
We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
Awaiting for your reply.
Thanks,
V.Senthilkumar

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Working with placeholders and templates in 10gR4

I am new to 10gR4 features. Can someone help me in working with placeholders and templates in 10gR4. Is there a document available on that?
This is what is did. I created a primary page which contains a contribution region for list of articles(dynamic list fragment). Next, I created a secondary page (hcsp file) which is designed to create/update new artcicles. I also added a placeholder before the contribution region for this article by name ArticleDetail.
I was able to add new articles and work with them as usual like in 10gR3.
But when I tried to access the contents of a particular article using wcm_place_holder service I am not able to see any contents.
This is the url for the request
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&siteId=TestSite&dataFileDocName=TESTCONTENTFILE&templateDocName=ArticleDetail
where the TESTCONTENTFILE is the content id of the article data file and ArticleDetail is the name of the placeholder placed above article contribution region.
I tried changing the value of templateDocName to content id of the article (TESTCONTENTFILE) and also tried the content id of eondary page file for article, but the same result. I am not able to see anything on the screen.
Also tried the same with above values with placeholderDefinitionDocName instead of templateDocName parameter but no good.
Anything wrong I am doing here?
Regards,
Pratap

I tried something different and I am getting the response but the content is not html.
This is what I tried
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=TESTARTICLE&templateDocName=TESTARTICLE
and I got the response which is xml data. I think it is the contributed data file for TESTARTICLE.
What we are looking for is the html text for presenting the article directly on external sites. The documentation for WCM_PLACEHOLDER says that it should get html directly. I am not able to get it.
This is the snippet of code of articleDetails.hcsp secondary page
================================================================================================


 



 
 




================================================================================================
Can you please suggest what else needs to be done in order to get html repsonse from WCM_PLACEHOLDER service.
Regards,
Pratap

Working with Classes and Arrays

hello to all,
public class Store
//private data
private Person list[];
private int count;
private int maxSize;
//constructor starts
public Store(int max)
count = Person.count(); //sets count to 0
maxSize = max;//maxSize is equals to max
Person list[] = new Person[maxSize];
}//end of store
//constructor ends
//accessor starts
public int getCount()
for(int i=0; i<list.length; i++)
int result = list;
return result;
}//returns the number of elements currently in store
the code above is working with classes and some arrays
what am trying to do is to display what the array holds
and then i meet an error saying that
INCOPATIBLE TYPES - FOUND PERSON BUT EXPECTED INT
Please note that am new to this!
Thank you in advanced!
<img src="file:///C:/Documents%20and%20Settings/fh84/Desktop/untitled.JPG" alt="" />

public class Store
 //private data
 private Person list[];
 private int count;
 private int maxSize;
//constructor starts
 public Store(int max)
 count = Person.count(); //sets count to 0
 maxSize = max;//maxSize is equals to max
 // Person list[] = new Person[maxSize];
 Person list[] = new Person[maxSize]; //set tne
 }//end of store
//constructor ends
//accessor starts
 public int getCount()
 for(int i=0; i<list.length; i++)
 int result = list;
return result;
am sending the code again

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

Attempting to work with documents and sandbox

Similar Messages

Maybe you are looking for