Attendance/absence 03.04.2010 - 03.04.2010 during non-working period

Hi,
When we are entering absences through PA61, getting an error message - Attendance/absence 03.04.2010 - 03.04.2010 during non-working period (att./abs.type CL01).
I think this is the holiday day calendar problem...or any other problem??
Plz guide..

Yes,
Check the work schedule of the employee for whom you are trying to enter the leave on that day.
Check if the date type is other than 0 or blank.
check through SCAL if any public holiday is assigned on that day.
check your absense type CL01's config for more details.
cheers
Ajay

Similar Messages

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

    Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

    Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
    That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
    ... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
    If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
    Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

  • HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

    I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

    Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
    MacBook Pro
    (13-inch, Mid 2010)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

  • Exporting from PDF to Word 2010 is not working in Acrobat 8

    Exporting from PDF to Word 2010 is not working in Acrobat 8.  I'm getting the following errors/messages.  Any suggestions?
    The instruction at “0x29034c05” referenced memory at “0x0000030”. The memory could not be “written”.
    Click OK to terminate the program 
    Click onCANCEL to debug the program
    Runtime Error!
    Program: C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrobat.exe
    R6025
    -pure virtual function call

    Not supported by Acrobat 8. Supported by Acrobat X.
    Be well...

  • Only records of less than one day allowed for attendance/absence type 1002

    Hi All,
    I am getting an error while maintaining my sick leave absence type
    "Only records of less than one day allowed for attendance/absence type 1002"
    how to resolve this
    SD

    Bcz recently i made a change like this
    For our sick leave
    "First 14 days(1- 2 weeks) Full Salary
    Next 14 days (3- 4 weeks) 75% Salary
    Next 14 days (5- 6 weeks) 50% salary
    Next 28 days (7- 10 Weeks) 25 % Salary
    More than 10 Weeks no Salary"
    so what i did is
    I mantain one Sick leave type and counting rule as -
    seq no 1 for "First 14 days(1- 2 weeks) Full Salary
    seq no 2  for Next 14 days (3- 4 weeks) 75% Salary
    like this for all the conditions
    and in deduction rule I maintained deifferent Absence quotas
    Plz suggest me this solution will work out
    SD

  • Only records of less than one day allowed for attendance/absence type COMP

    Hi Friends
    I configured all the process in IMG for compensatory off
    ie ,Absence types,Attendance Types ,counting rules and assignment
    but when I tried to create attendances on a particular public holiday in PA 30 then the system shows 'Only records of less than one day allowed for attendance/absence type COMP' (Compensatory Off)
    Anyone pls help me to solve this problem
    regards
    Lakshmi

    Hi
    In PA30 which infotype I should maintain  and where I can see the result.
    Eg If the person works on 25/12/2007(public holiday) ,he wants to take compensatory off on the next working day.
    In this case How I can configure
    Pls help
    Regards
    Lakshmi

  • Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

    Hi all,
    I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
    In application syslog/protocol I get this error:
    Function  'CISearch::EcGetRowsetAndAccessor' found, content indexing for database  'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
    Can anybody help me with this, if its necessary I can give further information :-)
    Thomas
    Thomas Deinert

    Hi,
    What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
    Download the script
    Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
    Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
    On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
    Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
    Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
    Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
    You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
    After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
    Similar thread:
    https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
    Best Regards.

  • Samsung Printer ML 2010 doesn't work since Mountain Lion

    Upgraded to Mountian Lion today and now my Samsung printer (ML 2010) doesn't work.  I uninstalled it then added it back and still doesn't work. 

    Hey majiqlady,
    I have a couple of articles here for you that may help you resolve this issue. This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • PT91 Attendance/Absence Report

    Hi Friends,
    I am running a standard report PT91 which gives attendance/absence report.
    I defined the indicators for the attendances like P for Present etc., And when I enter a attendance record in IT2002, the indicator is coming as "P". But if I enter the time in CAT2 and transfer through CAT6, when I run the report again, there I am getting "p" for that date.
    Can you please tell me from where I am getting this small p. User wanted to see only "P".
    Pls help.
    Regards,
    Venkat

    Hi,
    I checked both the tables and everywhere I am seeing like P only.
    One thing is, if I add the attendance in 2002 directly, its showing P and from CATS transfer its showing as p. Is there any config for this from CATS side?
    Rgds,
    Venkat

  • Default attendance/absence type in cat2

    Hi,
    I am getting two values as default for the attendance/absence type while going to cat2 transaction for time sheet entry for a particular pernr only.
    Please let me know its reason.What needs to be done in order to remove these.
    Thanks & Regards,
    Soumya.

    Hi,
    Thank you for your reply. Attendance type is not maintained as defalut in customization.
    Thanks & Regards,
    Soumya.

  • Error Not enough quota 30 for attendance/absence in ESS Leave Request

    Good Morning
    I am trying to create a "Leave Request" using ESS with  "Floating Days".  It has a cuota manual.  When trying to create the leave request in ECC all works fine, but when trying to create the same leave request in ESS the following error occurs:
    Not enough quota 30 for attendance/absence 0261 on 05.03.2008 for personnel no. 20001140
    Some can help me?
    Best Regards,
    Wilman

    Hi,
    I would suggest the following :
    Step1: Check your IT 2006/IT 2007 for your Absence and Attendance Quotas.
    Step 2: You can also verify the same information using the PT50 transaction ( quota Overview)
    Step 3: By doing the above you ensure that the person has the required quotas.
    Step4: logon to ESS and do the request for leave.if it does not let you, then there is some problem in the config in the ESS. I cannot tell you this from top of my head. We need to look into the portal to see what exactly the problem.
    regards
    Vijay

  • Attendance/Absence Text not available in CATS_APPR_LITE layout

    In the display layout of CATS_APPR_LITE the attendance/absence type description is not available for display.  Is there a way to display the attendance/absence type description in the layout?

    SAP suggested the following
    you can fairly easily include the desired textual descriptions in the
    report list by using the BADI CATS_REPORTING. In order to include the
    fields the following needs to be done:
    a) a new field zzawart_text needs to be appended to the structures
    CATSXT_COMP_DETAIL and CATSDB_ALV
    b) In the BADI Method BEFORE_DISPLAY_APPR
    the function module CATS_HR_ABSENCE_ATTEND_TEXT needs to be
    called for every record that has the AWART field filled
    the result of the function call is moved into the new field
    zzawart_text.

  • Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error

    Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error my internal and external domains are different i have godaddy certificate and i have redirected HTTP to HTTPS for OWA, but when i run the test-ActiveSyncConnectivity
    https://mail.mycompany.com/Microsoft-System-ActiveSync it gives me error unable to connect to remote server, the connected party did not respond after a period of time because connected server failed to respond 67.57.66.23:443 
    From outside owa and activesync is working but my outlook 2007 SP2 shows disconnect every 25 minutes and then connected again when i see windows evenyviewer i am getting error that CAS Server failed to connect to mailbox server. Later it disconnected for
    60 seconds, I think thats when outlook gives disconnect error to all users
    Your quick help is really appreciated

    Hi,
    Hope below KB will help you for resolution the issue
    http://support.microsoft.com/kb/2469722
    http://www.wiki-errors.com/err.php?wiki=443
    Dinesh S.

  • New Lync 2010 Deployment With OWA 2010 Integration Not Working

    I just installed Lync 2010 and it works fine with the Lync 2010 client.
    Our Exchange Server is Exchange 2010 SP3 and I can't get the OWA integration to work.
    I found various blogs with instructions, but they are all so old that I'm not sure all the prerequisite software hotfixes downloads they are pointing to install are still valid for Exchange 2010 SP3 and the Lync 2010 with all the latest updates.
    For a little while I got it partially working in OWA where some of the Lync integration was showing, but it was grayed out and the contacts lists would never load.  Now that I have tried several solutions, it no longer even partially works.
    I think I need to clear all the integration settings from both Exchange and Lync, so I can start over with valid instructions.
    What are the current instructions and current download files needed with the most up to date versions of Lync 2010 and Exchange 2010?  
    I also need to make sure that the syntax of the all the server and certificate names the various commands and wizards ask for are exactly correct.  Some of it is confusing on whether it is the actual DNS name, Exchange certificate SAN name or something
    else.

    TL_ERROR(TF_CONNECTION) [0]0878.0AC8::09/21/2014-19:27:55.515.000002d3 (SIPStack,SIPAdminLog::TraceConnectionRecord:SIPAdminLog.cpp(160))$$begin_record
    LogType: connection
    Severity: error
    Text: The peer is not a configured server on this network interface
    Peer-IP: 192.168.1.61:23952
    Transport: TLS
    Result-Code: 0xc3e93d6a SIPPROXY_E_CONNECTION_UNKNOWN_SERVER
    Data: fqdn="domain.local"
    $$end_record
    TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.289.00004a73 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 592054086
    Instance-Id: 0000005B
    Direction: outgoing;source="local"
    Peer: 192.168.1.101:50734
    Message-Type: response
    Start-Line: SIP/2.0 401 Unauthorized
    From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
    To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
    CSeq: 1 REGISTER
    Call-ID: ccb79e71bef84e2084502ffbd63115ad
    Date: Sun, 21 Sep 2014 19:28:36 GMT
    WWW-Authenticate: NTLM realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4
    WWW-Authenticate: Kerberos realm="SIP Communications Service", targetname="sip/Lync2010.domain.local", version=4
    WWW-Authenticate: TLS-DSK realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4, sts-uri="https://Lync2010.domain.local:443/CertProv/CertProvisioningService.svc"
    Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
    Server: RTC/4.0
    Content-Length: 0
    Message-Body: –
    $$end_record
    TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.304.000051a6 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 592054086
    Instance-Id: 0000005D
    Direction: outgoing;source="local"
    Peer: 192.168.1.101:50734
    Message-Type: response
    Start-Line: SIP/2.0 401 Unauthorized
    From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
    To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
    CSeq: 2 REGISTER
    Call-ID: ccb79e71bef84e2084502ffbd63115ad
    Date: Sun, 21 Sep 2014 19:28:36 GMT
    WWW-Authenticate: TLS-DSK opaque="2068882F", gssapi-data="FgMBCWUCAABNAwFUHybk5YL8BIG6/hEQ8Ho3vB2JmvRbl5XJKZwxAM+FWCDVMQAAt9DcOnkWE+JUcGJjlZfh78cGOcAxLv/yU9+cmQAvAAAF/wEAAQALAAXqAAXnAAXkMIIF4DCCBMigAwIBAgIKYUQCVgAAAAAABjANBgkqhkiG9w0BAQsFADBHMRUwEwYKCZImiZPyLGQBGRYFbG9jYWwxFjAUBgoJkiaJk
    TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.367.0000785c (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 2754735576
    Instance-Id: 00000063
    Direction: outgoing;source="local"
    Peer: 192.168.1.101:50734
    Message-Type: response
    Start-Line: SIP/2.0 403 Location profile only available when UC enabled.
    From: <sip:[email protected]>;tag=60cf26eaec;epid=a25bafc9cb
    To: <sip:[email protected];gruu;opaque=app:locationprofile:get;default>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
    CSeq: 1 SERVICE
    Call-ID: b01cbdd5693c4bbbb4c013d87a6a51eb
    Authentication-Info: TLS-DSK qop="auth", opaque="2068882F", srand="2A6F42FF", snum="2", rspauth="aec4e7a2404bbb46a0d55c9b42d3631cc36df614", targetname="Lync2010.domain.local", realm="SIP Communications
    Service", version=4
    Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
    ms-diagnostics: 2;reason="See response code and reason phrase";AppUri="http://www.microsoft.com/LCS/TranslationService";source="Lync2010.domain.local"
    Server: RTC/4.0
    Content-Length: 0
    Message-Body: –
    $$end_record

Maybe you are looking for