Attention: Ethmoid; process followed now I-web wont publish to my domain

HI Ethmoid or someone who can help.
the process below has been followed and now. My website has not prescence on the internet at all. It wont upload even though iweb says it is complete.
Posts: 1,752
From: UK
Registered: Nov 4, 2007
Re: Publishing from folder back to iweb???
Posted: Mar 28, 2009 5:20 AM in response to: All Eyes On Me Reply Email
If you are hosting your site on MobileMe, then you do not need to publish to a folder at all.
All you need to do is to change the forwarding method to get what you want. Log into your MME account through either System Preferences and MobileMe or enter me.com at the top of Safari. Once logged in, go to the section where is says Personal Domains at the side. Enter your domain name here.
You then need to go to your domain name registrar where you initially set up your web forwarding and cancel this. Then go to the DNS settings and set up a new CNAME with your domain as the alias and forward to web.me.com as your host.
If you do this, your url will then be domain.com/sitename/pagename.
You do not need to publish to a folder to do this - this option is only needed if you want to upload directly to your hosting space if you have it, which you don't if you are publishing to MME and forwarding.
Remember to back up your domain file for your site which can be found under User/Library/Application Support/iWeb/domain.sites. You need this to be able to alter your site in any way.
The published version is just that and is only for uploading or testing your site - iWeb can't import so you do need your domain file.

Firstly, is the domain name that you entered into your MobileMe account and the one at Melbourne IT the same? If not they need to be the same domain name.
Also, when you set up the new CNAME, did you enter either your domain name or www as your alias and then web.me.com as your host? If not, then you need to do this.
Also, have you published your site to MobileMe? If you are using MobileMe as a host, then all you need to do a publish all to MobileMe. When using MobileMe it is the linking process that will be incorrect. You are not publishing directly, but publishing to MME and then just forwarding.
Please go and check that you have done all of the above correctly.

Similar Messages

HT1349 i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

No message processing until now

Hi all,
We have an interface with a RFC sender and with several FTP receiver communication channels. After execute it, we are able to see in the sxmb_moni that the xml message has been successfully sent but on the other hand in RWB message monitoring we see that the sender is successful but the receivers are with 'to be delivered' status.
So no file is generated in our destination folder.
If we go to RWB -> adapter monitor -> file adapter we realise that receiver is in green status but says that 'no message processing until now'.
Does anybody of you know why our integration engine can not process our interface? (note that the sender seems to work properly as it is visible the xml message in sxmb_moni)
Thanks in advance and kind regards

Hi,
To configure FTP, you need to do the following things:
1.Download and install the ftp you need to use like guildftp and etc.
2.Add a user id and password to it.
3.Configure a root path.
4.Grant authorizations to the users like create, delete, append etc.
To configure FTP Protocol in XI, please go through all the following links. They should help you do the same.
http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/6c9442c22d1131e10000000a1550b0/frameset.htm
Configuring the Sender File/FTP Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Configuring the Receiver File/FTP Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://www.sapgenie.com/xi/
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
If content conversion is involved, You have to mention the field names in header of data type: fieldNames. Hence if the key field is not present it will throw an error in adapter monitoring, FIELD NOT FOUND.
To make note mapping cannot be performed with a flat file as XI understands only XML. Hence content conversion required.
Please go thru these links for step by step procedure to do the same:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
Hope they are helpful for you.
I hope I have answered your query.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.
Message was edited by: Abhy Thomas

No message processing until now in receiver1_cc in RWB (File Adapter)

Hi,
When exceuting a scenario ( XML to XML - between 2 third party systems using File Adapter & Transport Protocol : NFS), in RWB i am getting the following msgs:
Sender1_cc ( Communication channel )
Sender Adapter v2307 for Party '', Service 'sender':
Configured at 2007-12-11 18:49:52 IST
History:
- 2007-12-11 19:38:52 IST: Polling interval started. Length: 60.000 s
- 2007-12-11 19:38:52 IST: Processing finished successfully
- 2007-12-11 19:38:52 IST: Processing started
- 2007-12-11 19:37:52 IST: Polling interval started. Length: 60.000 s
- 2007-12-11 19:37:52 IST: Processing finished successfully
receiver1_cc ( Communication channel )
Receiver Adapter v2123 for Party '', Service 'receiver1':
Configured at 2007-12-11 19:05:25 IST
No message processing until now
and even when excute the TCode: sxi_cache, i am getting a warning message saying:
Error when accessing SLD: NO_BUSINESS_SYSTEM
Message no. SAI_CACHE221
But i have defined the Technical system and Business system perfectly.
I placed the "input.dat" in the source directory on the server but "output.dat" is not getting created in the target directory.
Please advise.
Regards,
Ravi

Hi Ravi,
ya it seem that your file has not been picked up.
only sender channel is polling.
once the message hit the sender channel then it can be seen in the channel log.
i have somthing for you
have you checked the permission of the folders where you are putting the file and expecting to get the output.
1) then give the full permission 777 to each folder.
2) have you given the path of the folder which you have created in server(i hope your folders is in server)
if not then create the folders in server and then give the location in communication channel.
one more thing
have your scenario cofiguration is right combination of your objects.
plz have a recheck.
also clear chache form IR
go to tool then refresh.
**PS: rewrd points if useful**
regards,
Sumit Gupta

Initiating BPM Process Instances from External Web Service Call

I'm attempting to update the HelloWorld example so that I can create an instance of the process from an External Web Services Call rather than via the Workspace. Our current SOA Architecture is configured so that all BPM instances are managed through a .NET SmartClient via the Service Bus and the use of PAPI W/S and so I'm wishing to recreate this capability in the new BPM.
I understand the replacement for PAPI W/S is Human Workflow so I've therefore updated and republished the HelloWorld Example with an Exposed 'TaskService' Service for the Human Task within the BPM Process.
I've then attempted to reference the TaskService through our existing BPM, and have been able to import a number of generic WSDL's as follows:
Task Service
http://vmaquatestapp2:7001/integration/services/TaskService/TaskServicePort?WSDL
Task Metadata Service
http://vmaquatestapp2:7001/integration/services/TaskMetadataService/TaskMetadataServicePort?WSDL
Task Query Service
http://vmaquatestapp2:7001/integration/services/TaskQueryService/TaskQueryService?WSDL
When I examine the available operations for these generic services, there are quite a lot, each of which have a fairly complex schema. I believe I should be using the TaskService: InitiateTask Operation to create an instance of my BPM Process but my questions are:
- Is the above the correct method of interacting with BPM Instances from an external system such as the Service Bus?
- Does anyone have any examples of a basic XML payload that would initiate a process instance?

I created an process with a message start event and can call it from an external web service call. I can also pass input arguments and map those to process data objects. However I can not find how to return data as response to the external web service call as e.g. the process instance id.
Is it possible to this?
Gr,
Gert Jan Kersten

Just moved to ISP PLUSNET and now loading web pages is dead slow

Just moved to ISP PLUSNET and now loading web pages is dead slow.
Like loading google will sometimes take 30 seconds to 1 minute but it used to load in a fraction of a second on my previous ISP.
Sometimes a new URL will take over a minute so I hit Stop Loading This Page and then try again and sometimes it might load instantly, or if not, it might continue to just drag on again.
It's so frustrating it's like being back on dial-up connection - but worse.
It feels like PLUSNET have put something on my Mac to slow it down.
PLUSNET has a restriction on how much I can use per month, which my previous ISP did not have, but according to PLUSNET's usage checker I am nowhere near the max, ie, I am allowed 10GB per month but the checker is showing I have used less than 100 MB so far this month.
I wonder if the PLUSNET usage checker is slowing down my usage coz it's really noticeable that it has only started to run slow since I moved to PLUSNET.
When I run a broadband speed check it always shows the feed coming in at around 5500 kbps or so which should be OK.
PLUSNET told me to go through their test page and I got to the part where it says install a Virus checker and an Adware checker but I'm not sure which ones to use coz I heard some of those checkers are themselves plants that infect you with a virus or keystroke logger.
Also I have Block Pop UP Windows running on Safari but yesterday a window popped up so that blocker seems to have been compromised somehow.
I have 17GB available on my HD of a total of 38GB.
Can anyone help me with this problem please?

(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
(An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Wikipedia also has an interesting article about Open DNS:
http://en.wikipedia.org/wiki/OpenDNS
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
More useful information here:
http://guides.macrumors.com/SpeedupSafari
Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
http://www.versiontracker.com/dyn/moreinfo/macosx/33696
Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

Trigger Process Chain through the Web

Hi,
I am trying to allow the users to control when they trigger a process chain through the web.
The users have a number of integrated planning sheets, which they access and input, once they are happy with the inputs, then they want to trigger the process chain to carry out additional loads.
I am using function module RSPC_CHAIN_ACTIVATE_REMOTE to trigger the process chain, when I test this with the chain set to direct scheduling it works fine.
I have set a planning function to call RSPC_CHAIN_ACTIVATE_REMOTE, with the process chain in question. Now when I run it with the chain set to direct scheduling it repeatedly calls the process chain over and over again, like it is in an endless loop.
When I try setting the chain to Meta Chain or API nothing happens.
Does anyone have any ideas why I can't get this to work through the web?
Thanks
D

CALL FUNCTION 'RSPC_API_CHAIN_START'
 EXPORTING
 i_chain = 'YOUR PROCESS CHAIN NAME'
 EXCEPTIONS
 error_message = 1.
 IF sy-subrc <> 0.
 CALL FUNCTION 'BALW_BAPIRETURN_GET1'
 EXPORTING
 type = sy-msgty
 cl = sy-msgid
 number = sy-msgno
 par1 = sy-msgv1
 par2 = sy-msgv2
 par3 = sy-msgv3
 par4 = sy-msgv4
 IMPORTING
 bapireturn = p_return.
 RAISE STREAM_FAIL.
 ELSE.
 RAISE STREAM_SUCCES.
 RETURN.
 ENDIF.

I bought the Snow Leopard Update but now my macbook wont even accept the DVD and keeps ejecting it. This is the same for all DVDs.

I have a very old (refurbished, bought over 4 years ago) macbook pro 15". It's been running ok on OS X 10.5.8 until very recently. It started ejecting disks, and then the new adobe flash player update wouldn't work. Lots of other little things have been happening as well.
I had been considering buying a new macbook, but one of the Apple store people suggested I update instead (a much cheaper alternative!). So I bought Snow Leopard, and it arrived in the post today. But now my macbook wont even accept the dvd. It takes it in, whirs and complains a bit (for less than 60 seconds) then ejects it again. I have tried cleaning the disk, cleaning the disk area with a credit card + lens cleaner (a trick I saw recommended on this forum). But no luck.
Any advice?
I am a trainee teacher and actually will be gutted to have to get a new laptop (as I really cant afford it). BUT obviously if I have to I will. I just need to extend the life of this one for as long as possible, until I have more money to get a better one!

Bring your MBP to an Apple store genius bar and see what they say about your MBP optical drive.
Look on the OWC web site. They sell optical drives for older MBPs. Perhaps there is one that will fit yours. Installing one is not brain surgery.
Otherwise examine the iFixit.com and Powerbookmedic.com web sites for replacements.
Ciao.

Changes to the Web Service publishing process (Operationalization)

With the new release of Azure ML features, we are updating the web service publishing workflow. Below are the list of changes:
Web Service Input / Output modules: these replace the input and output ports previously used to create web services. You can now drag and drop them on the experiment from the left pane under Web Services (instead of right-clicking on the module).
Generation of Scoring experiment from Training experiment: We have automated the steps in creating a Scoring experiment by adding the Web service input and output modules, and automated the saving of the Trained model. With this feature, you no longer need
to manually save a trained model and add it to a Scoring Experiment. The "Create Scoring Experiment" button will trigger these events and generate the Scoring Experiment for you. The resulting Scoring experiment can be published as a web service
as is, or user can make modifications to the generated workflow including location of input/output modules.
To use this feature:
  ○ Create a Training Experiment (includes an algorithm such as Boosted Decision Tree and a Train Module)
  ○ Click Run
  ○ Click Create Scoring Experiment
  ○ Review the resulting Experiment, then Click Run
  ○ Then click Publish Web Service
A sample Training Experiment:
Publishing a Training experiment as a web service:Similar to the Scoring experiment, we have now automated the steps to create a web service from the Training experiment using the "Prepare web service" command button. This action adds Web service
input and output modules to the training experiment. The experiment can then be published as a web service. This approach to creating a web service is needed for setting up the Trained model for retraining using the Retraining APIs. But is not the recommended
approach for creating web services - Scoring experiment should be used for that purpose.
Publishing an experiment as a web service: in cases where the experiment does not involve training, such as when processing, transforming and cleaning up data, it can also be published as a web service using the "Prepare web service" button.
We will publish more detailed documentation for this and other features shortly. Please let us know if you have any questions.
Thanks,
The Azure ML Team

Hey Freppas, can you give some more information about your first ask? For classifiers, we already output the scored probability along with the scored label. You can limit the output to just the probability using the Project Columns module to exclude unwanted
columns. The web service is not concerned with domain-specific functionality - it will output exactly what you see being output in Studio when you set up the web service ports
The second ask is something we're working on bringing to our product - feature importance. Again, you would have to make it happen in the Studio before you publish the web service for the web service to have that functionality

Now the iphone wont connect to itunes

I uninstaled my web cam on the laptop because my computer would shut down when i conected the iphone..well that fixed that problem but now my iphone wont connect to itunes...can anyone help
ta
Craig

Follow the directions here:
http://support.apple.com/kb/TS1495

I deleted bonjour in error, now my music wont play ?

I deleted bonjour in error, now my music wont play ? Do I need this to play music ? If so how do I re install ?
Thanks

- Did you update the iPod?
- Try the following:
- Reset. Nothing will belost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Updated & Restored now click wheel wont work

I have an iPod Nano 2nd generation.
It froze on me... so I followed all of the instructions.
Charged it up. Updated software. Restored the Nano.
Repeated the process.
Now it is stuck on the select language screen - but anytime I click any buttons - nothing happens!
When I restored it... everything appears normal from within iTunes - it tells me it is synching my music, allows me to name the iPod. Click wheel does work when connected to the computer either.
HELP?
Thanks
Dave

The click wheel is broken and needs to be replaced. It will also need a new battery.

HT1725 I just spent 15 dollars on a movie and my wifi shut off half way through the downloading process and now when i look in "purcheased" it's not there.

I just spent 15 dollars on a movie and my wifi shut off half way through the downloading process and now when i look in "purcheased" it's not there, is there anyway I can get back to downloading my movie ?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it

updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.

Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried?

Attention: Ethmoid; process followed now I-web wont publish to my domain

Similar Messages

Maybe you are looking for