Attention Mac 10.7.2 users that are crashing with Adobe AIR - SOLUTION

We are aware of the crashes that can occur with late model Apple computers running 10.7.2 and have worked closely with Apple to address this issue.  If you find that AIR is crashing on your system, please update to OS 10.7.3.  If you still encounter issues please create a new thread and include your crash log for further examination.
If you had previously disabled "Automatic graphics switching" (see screenshot below), you should now be able to safely re-enable this feature without impacting AIR performance.
Open System Preferences, select Energy Saver and enable Automatic graphics switching
Thank you,
Chris

Chris: I decided to not create another thread.
The Error-Log:
<snip>
26.03.12 12:53:14,801 Adobe AIR Installer: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.7.3 x86
26.03.12 12:53:14,801 Adobe AIR Installer: Commandline is: -psn_0_2744990
26.03.12 12:53:14,801 Adobe AIR Installer: No installed runtime detected
</snip>
This, esp. "No installer runtime detected" I notice since SnowLeopard (at least).
And so, no I don't think you worked out anything out with apple.
What I tried so far is:
Started Chrome Yes & No
Fresh system start Yes & No
Automatic graphic switching On & Off
All above in any combination
much more...
Your help would be very much appreciated.

Similar Messages

  • Are there any browsers for Mac other than Safari and Google Chrome that are better with adobe flash for my Macbook 2009?

    On Safari Adobe Flash freezes at times on popular Flash chatroom I visit and on Google Chrome when I try to type the typing is laggy delayed. Adobe Flash needs to be fixed in Safari and possibly other Browsers, and Google Chromes html5 or whatever flash replacement their browser uses ***** on older hardware.

    Go for Safari always, you will have more advantages than any other browser. You can safely install the Adobe Flash pluguin, it will install as pref pane in your System Preferences. From there you can limit its access, block sites for storing info in your mac.
    Under the advanced tab of the Flash Player in System Preferences, check “Notify me to install updates”, so you are always up to date (feel free to check out any update directly form the Adobe website to be safe).
    Steve does't want to allow Flash for iOS due to security issues (long story). But it's OK for mac, if you keep an eye on it.
    Google's Chrome its decent, but you know, it's Google. I will prefer to take the advantage of the Apple's ecosystem, like syncing all Safari content and passwords with iCloud, to keep using it in your iOS devices. You can have an open page in your mac, and go to your iPad and continue with the same page.
    Also you can find some useful Safari extensions that will trick the websites to load an HTML5 version of the video instead of flash (like if you were on an iPad).

  • How do I chat between users that are under one .mac/MobileMe family acct?

    How do I chat between users that are under one .mac/MobileMe family acct? We are all under one account, but in different locations, using iChat 4.0.5 and OS 10.5.4. Thank you.

    The only way is to create separate accounts under either AIM or Jabber (for example Googletalk). Then everybody logs into iChat with a different user and you can have full iChat functionality (except encryption which works only if you have different .mac accounts). If some members of your family have already a gmail/googlemail account then they can use this account information to log into iChat if you create a Jabber account with the gmail user information. Otherwise go to www.aim.com, request a screen name and use this user information to create an AIM account in iChat.
    Have fun.

  • When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted.

    When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
    I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.

    Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.

  • HT2515 Does iChat work with other users that are on other types of smartphones?  or only Mac phones and Mac mail, contacts, etc?

    Does iChat work with other users that are on other types of smartphones?  or only Mac iPhones and iMac Mail, Contacts, etc?

    Hi,
    The Messages Beta will Send iMessage to iPhones (Messages replaces iChat)
    iChat can SMS to phones
    It needs the computer to be listed as if it in the United States and contacting a Phone that is on a Carrier in the United States that is accepting SMS forwarding from AIM
    You list the Buddy as AIM and then +plus their number as in +123456789
    The computer can be made to "think" it is in the United States in System Preferences > International (or Text a Language in Lion) then Formats tab.
    The Phone has to be a US phone with all the trimmings about AIM's SMS forwarding.
    11:14 PM      Monday; February 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Script to find users that are a member of more than one of a list of specific groups

    Hi,
    I need to generate a list of users that are members in more than one group, out of a list of specific security groups.  Here's the situation:
    1) We have about 1100 users, all nested under a specific OU called CompanyUsers.  There are sub-OUs under CompanyUsers that users may actually be in.
    2) We have about 75 groups, all directly under a specific OU called AppGroups.  These groups correspond to a user's role within an internal line of business application.  All these groups start with a specific character prefix "xyz", so the group
    name is actually "xyz-approle".
    I want to write a script that tells me if a user from point 1) is a member in more than one group in point 2).  So far, I've come up with a way to enumerate the users to an array:
    $userlist = get-qaduser -searchroot 'dq.ad/dqusers/doral/remote' | select samaccountname |Format-Table -HideTableHeaders
    I also have a way to enumerate all the groups that start with xyz that the user is a member of:
    get-QADMemberOf -identity <username> -name xyz* -Indirect
    I figure I can use the first code line to start a foreach loop that uses the 2nd code line, outputting to CSV format for easy to see manual verification.  But I'm having two problems:
    1) How to get the output to a CSV file in the format <username>,groupa,groupb,etc.
    2) Is there any easier way to do this, say just outputting the users in more than one group?
    Any help/ideas are welcome.
    Thanks in advance!
    John

    Here is a PowerShell script solution. I can't think of way to make this more efficient. You could search for all groups in the specfied OU that start with "xyz", then filter on all users that are members of at least one of these groups. However, I suspect
    that most (if not all) users in the OU are members of at least one such group, and there is no way to filter on users that are members of more than one. This solution returns all users and their direct group memberships, then checks each membership to
    see if it meets the conditions. It outputs the DN of any user that is a member of more than one specfied group:
    # Search CompanyUsers OU.
    strUsersOU = "ou=CompanyUsers,ou=West,dc=MyDomain,dc=com"
    $UsersOU = New-Object System.DirectoryServices.DirectoryEntry $strUsersOU
    # Use the DirectorySearcher class.
    $Searcher = New-Object System.DirectoryServices.DirectorySearcher
    $Searcher.SearchRoot = $UsersOU
    $Searcher.PageSize = 200
    $Searcher.SearchScope = "subtree"
    $Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
    $Searcher.PropertiesToLoad.Add("memberOf") > $Null
    # Filter on all users in the base.
    $Searcher.Filter = "(&(objectCategory=person)(objectClass=user))"
    $Results = $Searcher.FindAll()
    # Enumerate users.
    "Users that are members of more than one specified group:"
    ForEach ($User In $Results)
        $UserDN = $User.properties.Item("distinguishedName")
        $Groups = $User.properties.Item("memberOf")
        # Consider users that are members of at least 2 groups.
        If ($Groups.Count -gt 1)
            # Count number of group memberships.
            $Count = 0
            ForEach ($Group In $Groups)
                # Check if group Common Name starts with the string "xyz".
                If ($Group.StartsWith("cn=xyz"))
                    # Make sure group is in specified OU.
                    If ($Group.Contains(",ou=AppsGroup,"))
                        $Count = $Count +1
                        If ($Count -gt 1)
                            # Output users that are members of more than one specified group.
                            $DN
                            # Break out of the ForEach loop.
                            Break
    Richard Mueller - MVP Directory Services

  • How to retrieve the users that are following a document using JSOM / REST APIs in SharePoint 2013

    Hi everyone,
    Does anyone know how to use JSOM / REST APIs to retrieve the users that are following a specific document in SharePoint 2013? 
    Thanks in advance,
    Nam

    Hi Nam,
    Please use the sample code to get the followers for the document. Courtesy: Mokhtar
    Bepari 
    using Microsoft.SharePoint.Client;
    using Microsoft.SharePoint.Client.Social;
    ClientContext clientContext = new ClientContext("http://URL");
    SocialFollowingManager followingManager = new SocialFollowingManager(clientContext);
    SocialActorInfo actorInfo = new SocialActorInfo();
    actorInfo.ContentUri = "<documenturl>"; //set the document url.
    actorInfo.ActorType = SocialActorType.Document;
    //By using the GetFollowed method you can get the people who the current user is following.
    ClientResult < SocialActor[] > followedResult = followingManager.GetFollowed(SocialActorTypes.Users);
    //By using the GetFollowers() method you can get the people who are following the current user.
    ClientResult < SocialActor[] > followersResult = followingManager.GetFollowers();
    clientContext.ExecuteQuery();
    Once you get the resultset you can iterate like below:
    foreach(SocialActor actor in followedResult)
    string name = actor.Name;
    string imageURL = actor.ImageUri;
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    It's either hand right or left.
    I have the same issue myself.  Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.

  • Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?

    Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?

    Yesterday I set up a Canon IP3600 to work on a PowerBook G4 running OS 10.4.11. It is a print-only unit. I got the 10.4 drivers off the Canon website before connecting the printer. Many Brother printers still have support for older Mac OS versions.
    If you need a multi-function device, it is gettng very hard to find any that support PowerPC Macs (pre-2006) of OSX versions older then 10.6 any more.
    As you posted in the PowerPC iMac forum I assume you have one. However, there are some Intel Macs (2006 and newer) still running 10.4. Check "About this Mac" under your Apple menu: if it says you have an Intel processor, you have many more doors open.

  • "Office 365 Mailbox" missing for users that are member of Ricipent Management role

    Hi,
    I have a hybrid setup with Office 365 and one exchange 2013 standard server on-premises.
    I currently have an issue with that I have a button after pressing the + under recipient to create a Office 365 mailbox from the ECP, but users that are members of the Recipient Management role don't have that button visible.
    What extra permissions are required to be able to create an Office 365 mailbox from the on-premises Exchange?

    Hi SeidKrv,
    Thanks for your update.
    Following article introuduces the permissions that need to assigned before running "New-Mailbox" command.
    Please focus on "Recipient Provisioning Permissions" session.
    Recipients Permissions
    http://technet.microsoft.com/en-us/library/dd638132(v=exchg.150).aspx
    Based on the article, it seems both Recipient Management role and Organization Management role are required.
    More detailed information on both management role as below:
    1. Administrators who are members of the Recipient Management role group have administrative access to
    create or modify Exchange 2013 recipients within the Exchange 2013 organization.
    2. Administrators that are members of the Organization Management role group have administrative access to the entire Exchange 2013 organization and
    can perform almost any task against any Exchange 2013 object, with some exceptions. By default, members of this role group can't perform mailbox searches and management of unscoped top-level management
    roles.
    Thanks
    Mavis Huang
    TechNet Community Support

  • I have 7 users that are interested in ExportPDF. Do I need 7 separate licenses?

    I have 7 end-users that are interested in ExportPDF. Do I need 7 separate licenses or just one since the service is cloud based?

    Hi candanceh48631207,
    Your assumption is correct. Each subscription is tied to a unique Adobe ID/email address. So, you'll want to purchase a subscription for each user, and have that subscription tied to their Adobe ID/email address.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Listing users that are member of special role

    hello
    if i have a role that called role1 then how i can list users that are member of this role?
    thanks

    Try Pete Finnigans who_has_role.sql
    http://www.petefinnigan.com/tools.htm

  • Find USERS that are using a particulary Forms ??

    It is possibile to find the USERS that are using the a FORMS in application server ??
    I must update sometime a forms, but if the user is using the forms it is not possibile. Find the user i can call it for exit from teh form.
    Thank's a lot.

    I'm not aware of such an information somewhere. We had a similar need (actually we needed something more), and we used DBMS_APPLICATION_INFO package, which updates CLIENT_INFO column in V$SESSION.
    Bad news are : you have to change every Form to do that....but it's not difficult, you can add a call to that package in WHEN-NEW-FORM-INSTANCE trigger in each Form...

  • HT3395 What are some camcorders that are compabtible with the mac book pro and also records high quality youtube videos?

    What are some camcorders that are compabtible with the mac book pro and also records high quality youtube videos?

    any camcorder using AVCHD…

  • MAC (10.6.8) users having permission issues with windows 2003 AD and NetApp SAN environment.

    I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD.  When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
    https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
    http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
    Any help will be appreciated.
    Thanks,
    Manu

    This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
    It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
    I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
    Note: You should only try SMBup on a test setup first.

Maybe you are looking for