Attention Pro's Synchronization

Hello friends.
I have a new iMac 24" (with an external 17"monitor), iBook G4 and various MIDI controllers.
I compose to film, what I would like to do is connect the two macs together (via Ethernet) and have one Logic session loaded on both computers. So that when i record, the iMac will run the program in record mode and the iBook will play the video.
Is this possible? especially because one is a PowerPC and the other Intel?
From reading other threads I understand this may be achieved using the MTC?
This way i get to have three screens running simultaneously.
Kind Regards
p.s. I havent tried anything yet because i don't want to screw up my settings.
iBook G4 1.25 GB SDRAM 1.33GHz, iMac 24". Mac OS X (10.4.8) MBOX, Roland HP1 Digital Piano, LaCie D2 Hard drive, BCF2000

Yes, it's possible. Check out my other post here:
http://discussions.apple.com/thread.jspa?threadID=763416&tstart=0

Similar Messages

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Quicktime Pro audio synchronization problem when recording

My hardware is an Intel Based Macbook Pro with the latest Quicktime Pro S/W.
I have just upgraded to Quicktime Pro and I am trying to record video from a DV source (Canon camera acting in AV in/DV out mode). The problem I am experiencing is that the video and audio are out of sync by around 1 second, th sound seems to be in advance of the video.
Are there any setting which will affect this?
Has anyone been able to solve a similar problem?

I don't know what causes the problem, but I can give you a way to solve it:
Open your DV file with latest version 3.0 of SimpleMovieX and open the tools panel, go to Audio, and resynchronize it.
The do save, either as mov or reexport as dv format, depending on your workflow.
Website to download:
http://www.aeroquartet.com/
Note: I'm the developer of this app.
Regards, BJ

Slow motion (constant speed) rendering problem. ATTENTION PROs!

I have tried almost everything to try and fix my problem and now I am going insane!
I am editing a short promo featuring constant speed adjustments and video filters. When I render the video seems to drop frames and jutter. Why is this when i have only reduced the speed of the clips by 50% or 75% ? ?
I have put it through compressor several times and printed the video onto DVD to see if the problem lies within any other program, but i believe my problem is with final Cut HD.
The footage is HDV interlaced. I have made sure the frame blending options are checked although this makes no difference and have rendered it I dont know how many time.
Do I need to bring the original rushes out of the bin and adjust the speed again from scratch...essentially start again?
HELP! I am going mad!
Mac Book Pro (2ghz intel / 2gb memory) Mac OS X (10.4.9) Final Cut Studio HD

I have done it!
I firstly made a quicktime movie, using current settings, to create a single HDV clip. I then created a new sequence, titled HDV, and opened up the sequence settings. Going into the video processing tab I changed field dominance to 'upper odd' and motion to 'best'. I then dropped the new HDV clip into the timeline. At this point I sent this new clip to Compressor and chose the 'best quality 90min 16/9', MPEG 2 two pass + Dolby. EXPORT....HAPPY DAYS! The results are great. Perhaps I could make it better by stopping the footage down to SD first?

***Attention Pro's***

Hello, not sure if i'm in the right area for this... here goes:
I have, an iMac 24, wiith a 17" external display and a 14" iBook G4. I use logic to to compose to film, i know that you can use a G4 in conjunction with a Mac Mini as a node.
Now, what i would like to do, is use the 24"display for my arrange page, the 17" for my mixer and then use the ibook to play the video.
Is this at all possible with a networking cable, so as i pressed play in logic, it would tell the quicktime movie to play on the iBook?
Not a clue if i could do this.
Regards

Why would the app be running in Rosetta?
Good question. Rosetta is designed to be transparent, i.e. take over automatically if a PPC application is being run. When the Intel machines were first introduced, a number of Internet plug-ins were not yet converted to Universal Binary. Hence, the option of running Safari in Rosetta mode was important.
I can only speculate why Safari was set to Rosetta mode on the one machine. It may have been set that way at the factory, or E.T's may be hacking into your machine. But forget that last comment, as I don't want to initiate any conspiracy theories in the forums.
Good luck with your new machines.
Thanks for the and Aloha from Big Island.

How do I synchronize multiple *sequential* clips using audio waveforms in Premiere Pro CC?

I recorded a concert at my kids' school. I ended up with:
Video in six separate clips (video+audio) from my Canon 5D Mark III camera
A single audio clip from my Zoom H4n recorder
The 5D Mark III can only record clips of up to 4GB in size, and clips 30 minutes in length. The clips broken up by the 4GB size limit are adjacent to each other, but the clips broken up by the 30-minute limit have a stop-pause-restart gap of a few second.
On past such projects, I have used PluralEyes 3.0 to synchronize the clips. But PluralEyes converts each stereo audio track into dual mono tracks, which I don't like.
I just happened upon this video: http://tv.adobe.com/watch/learn-premiere-pro-cc/merge-clips-automatically-using-audio-wave forms/?t=0 It shows how to synchronize a single video+audio clip with another audio clip. It also shows how to synchromize multiple concurrent video+audio clips with another audio clip, for multi-camera editing. But it doesn't show how to synchronize multiple sequential video+audio clips, as I got from my Canon 5D Mark III.
It seems that every time I select multiple video clips, the Synchronize item in the pop-up menu is disabled. When I select only the first video clip and the full-duration audio clip, I can synchronize them with audio waveforms. But then when I try to select the second video clip and the full-duration audio clip and synchronize them, it breaks the sync of the first video cilp
Can Premiere Pro CC synchronize multiple sequential video clips using the audio waveform method?
I am running Premiere Pro CC version 7.2.1 (4).
Thanks.

I'm an editing newbie but this was the very first task I needed to do, i.e. align multiple video clips with a single audio track. My setup is similar. I'm shooting with a Canon 70D, which breaks up video into 4gb clips, which are continuous and easy to align end to end. But the 70D like the 5D only shoots for 30 minutes continuously, so a second or two is lost hitting record again. My external audio was recorded continuously with a camera mounted Tascam (like a zoom) with a line in to the camera. So, in theory, the audio should be the same on the external audio and the audio associated with the video clips, which probably helps the software identify the identical wave forms.
I found that I could roughly align the video clips based on the audio wave forms and then "synchronize" the audio as shown in the video (Merge clips automatically using audio waveforms | Adobe Premiere Pro CC tutorials). I found that this aligned the audio perfectly but separated the video from its associated audio track. But it's easy to select the video and snap it back into alignment with its audio. While it would be nice to have everything merge automatically, using synchronize sequentially did not take much time.
Hope that all makes sense.

Can we avoid Skydrive pro synchronization generate hugh traffic?

We are considering provide Skydrive Pro feature to our company users (1,000 internal users). Do Microsoft provide any setting regarding the synchronization mechanism?
For instance, the 1000 users have setup sync to same document library. Someone add a new document to the library at mid-night. On the other morning when everyone come back to office, turn on his PC, will all 1000 PC starting download the new document
to their local folder at the same time? I am sure our network admin will not approval.
Is anyone come across this scenario? Do Microsoft provdie any workaround? (e.g. auto sync is forbidden, everyone have to trigger sync manually)
Thanks for any input!

Hi,
I complete agree with you. It is the notion that things are growing bigger in any sense and the way to handle it seems to be a marvel of different caching mechanisms.
Downloading the files locally, is kinda caching content. It will supply you with a copy to work on offline, which in sense perform better.
One thing that should be considered a must when implementing any form of caching solution is the ability to manage it. It seems however to be a general issue surrounding SkyDrive and SkyDrive Pro atm.
After reading your question, I did find some other mentions regarding this matter. Mainly in relation to SharePoint Online, where people were hitting there quota really fast, due to SkyDrive Pro library synchronization. I recon this is considered a minor
issue, as you can just buy more traffic.. Yeah right!
There is some mention of Pausing the Synch, however I am unable to find any programmatically way of doing this. (Quick google search)
http://office.microsoft.com/en-001/support/stop-syncing-a-library-with-skydrive-pro-HA102850041.aspx
As we work quite a lot of Microsoft Cloud offerings, I'll have a hear around the office :)

Sync between my iPhone 4s and Mac Book Pro with OS X and iCloud does not work. Why?

I just purchased an iPhone 4S and downloaded Mac OS X on my Mac Book Pro. Synchronization between my iPhone and my Mac Book does not work with iCloud. Why?

You have set everything up - entered apple id, are connected to the Internet, Mac os x lion update installed enabling iCloud, etc?

Before a trip, my Mac Book Pro didn't shut down completely.

When I arrived and opened the Mac, the clock was wiped out and showed 1, 1, 2000. Now my email has incoming dated March 25, 2014. Yes, Mac Mail. What can I do?
I did my disk utility 3 times. Got some of the other functions corrected. The MacMail is still showing March 25, 2014. This has been for the last week.
Any ideas?
In a time warp
Have OS 10.7.5 running

therafrombodega bay,
log in as your administrative user. In the Finder, press Command-Shift-U to bring up the Utility folder, and run Terminal there. In the Terminal window, enter the following command, pressing the Return key at the end of the line:
sudo date -n 030817102014
This command will ask for a password; give it your adminstrative user’s password. The password will not display as you type it in; this is a security measure.
After this command has been entered, open the Date & Time pane of System Preferences. If the padlock in the lower-left corner is locked, click on it to unlock it (and provide your administrative user’s password when requested). In the Time Zone tab, select your proper time zone. In the Date & Time tab, ensure that the “Set date and time automatically” checkbox is checked. You can then lock the padlock if desired. Your MacBook Pro should synchronize its date and time by itself.

Trying to connect IMac to Lion server (network account)

Hello,
     I have been trying to get this to work for a few weeks now. I have 2 Imacs and a Macbook, i am trying to login to a network account. I did the step by step to set up my server. I can screen share and see all the shared folders. I have a network user in the work group, and when i go to users on my macbook, and say join the server, i get host not found, but the server is active.
     My network is a DSL modem ( in bridge mode), then to a time capsule, that is hard wired to my server and one Imac, everthing else is wireless. My time capsule hands out the Ip's, and a DNS server is running on my lion server.
     Am I having a DNS problem, I am not sure what DNS has to go where starting with the time capsule. Should i have my time capsule just server one IP to my lion server and have the server hand out the other IP's over DHCP?
     My goal is to have network user account on my server, and no matter what computer you use, you can get the same information. Then set up mobile account for when my macbook is not on the network.
     I setup profile manager, and tried to push my settings to my account, but it also fails every time.
     I tried to follow apple's doc's on this but I have luck with some things, and now with others.
    I am running lion server on a mac mini server.
Thank you,
     Justin

HI,
my experience is as follows:
1. You have to setup a home folder for network/mobile users with Server.app
2. Create a group for network users with the workgroupmanagement.app from serveradmin tools
3. Create users with correct settings under "preferences" in workgroupmanagement.app, especially "rules"
4. Put the users in the group
4. Set the appropriate permissions to the home folder and share it over the network with server.app
After playing around I could login from a MacBook Pro and synchronize the users library and complete home folder. After testing and restarting the machines (Lion Server is on a Mac Mini) I could relogin with the network/mobile user.
My problem actually is, that I could not login from any other Mac. Everytime the system told me, that there is a fault with login.
Before I want to login with the network/moblle user on another MacBook i logout the user form the MacBook Pro.
No luck :-(
I test it with other users with same settings.
No luck :-(
I integrate the MacBooks in the Computer settings in the workgroupmanagement.app.
No luck :-(
I hope this thread give answers the next days, because I need a working synchronize and account management solution for different users and machines :-)
Cheers
Ishan

Troubleshooting trying to connect iMac 2009

Hey, I've got an iMac 2009 that I bought in France and I installed on it the latest update of Lion (10.7.3). I recently moved into the USA and now, my Mac won't connect to the network. I tried both WiFi + Ethernet but it only stays like 10 minutes to 1 hour connected and then the connection doesn't work anymore and then I need to switch my router on and off to have my connection back. I installed all the Software Update that I can on it but I still have that problem and so I need to restart my router like 10 times a day. Do you have a solution for me ?
Thank you, Sebastien

HI,
my experience is as follows:
1. You have to setup a home folder for network/mobile users with Server.app
2. Create a group for network users with the workgroupmanagement.app from serveradmin tools
3. Create users with correct settings under "preferences" in workgroupmanagement.app, especially "rules"
4. Put the users in the group
4. Set the appropriate permissions to the home folder and share it over the network with server.app
After playing around I could login from a MacBook Pro and synchronize the users library and complete home folder. After testing and restarting the machines (Lion Server is on a Mac Mini) I could relogin with the network/mobile user.
My problem actually is, that I could not login from any other Mac. Everytime the system told me, that there is a fault with login.
Before I want to login with the network/moblle user on another MacBook i logout the user form the MacBook Pro.
No luck :-(
I test it with other users with same settings.
No luck :-(
I integrate the MacBooks in the Computer settings in the workgroupmanagement.app.
No luck :-(
I hope this thread give answers the next days, because I need a working synchronize and account management solution for different users and machines :-)
Cheers
Ishan

5400 versus 7200 rpm firewire disk: does it matter?

I'm in the market for an external firewire drive. The model I'm considering (LaCie Rugged Hard Disk) comes in 5400 rpm and 7200 rpm versions. I will be using my iMac G5's FireWire 400 connection. Given the transfer speed limitations of FireWire 400, will I see a difference between the 5400 rpm and the 7200 rpm models?
I will typically use Retrospect to backup my entire hard disk, and Synchronize Pro to synchronize folders between the external and internal disks.
Thanks.

Probably not with 400 transfer, however if you want to upgrade your computer later to an intel with 800 Firewire, you might be glad of the greater speed.

Servlets: Will the value of the counter be kept?

Good morning fellow forum users.
I'm using a static counter.class to keep track of the number of times an input is made.
import java.util.*;
import java.awt.*;
public class counter {
static private int count = 0;
public counter() {
} // constructor
static public void increment() {
count++;
}// end of increment()
static public int getCount() {
return count;
} // end of getCount()
} // end of counter class
In the program, whenever an input is being made by the user, I'd call
counter.increment();
the same servlet is called by different JSP pages
(eg. init.jsp -> select.jsp -> select.jsp -> select.jsp etc)
I check for the counter value using an
if (counter.getCount() == 3) { do something };
but this "do something" is never executed.
Query 1: Is my Static counter's value still valid when different JSP pages call it?
Query 2: Is there anyway i can system.out.println(counter.getValue()) to check my counter value, for nothing is shown when i used that in my servlet.
Thank you for your kind attention! :)

(1)Synchronize the methods.
(2)Your counter class does not need constructor.
I check for the counter value using an
if (counter.getCount() == 3) { do something };
but this "do something" is never executed.Because it was not 3.
Query 1: Is my Static counter's value still valid when different JSP
pages call it?Use synchronization. It should be valid if your definition of 'valid' is proper.
Query 2: Is there anyway i can
system.out.println(counter.getValue()) to check my counter value,
for nothing is shown when i used that in my servlet.No such method: counter.getValue()
Message was edited by:
hiwa

How do I add my Hotmail account to my Mail app on my MacBook Pro so that it synchronize automatically ?

Hi guys, I'm new to Mac. I know that you can add email accounts likeHotmail into your Mail app so that you can view, edit, modify, create and delete your emails and folders, etc. The questions I have are (1) can I see all the emails I have not just in the inbox but all the other folders as well just like if I was logging on to Hotmail via Internet Explorer ? (2) what happens if I read some emails, delete or move some emails, create new emails and send or save in draft, create or delete folders, etc in the Mail app on my MacBook Pro, will this synchronize and reflect the same on my Hotmail account if I was to logging via Internet Explorer ? How about the other way ? If so, how do I set it up on my MacBook Pro to do this automatically ?
I know that this doesn't work with Hotmail accounts on my iPhone 4 via the Mail app. Everytime I read an email or delete an email on my Mail app, it does not synchronize or reflect the same on my live Hotmail account when I logging via Internet Explorer.
Any help, guidance or advise would be appreciated. Thanks.

Edit: never mind, I was using the wrong password

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

On the MacBook launch iTunes.
From the menu bar click Store / Authorize This Computer.
Now sync your iPhone.
Apple - Support - iPhone - Syncing

***Attention Pro's*** Synchronization

Similar Messages

Maybe you are looking for

Attention Pro's Synchronization