ATTENTION!

just wanted to make sure someone would look at my post in "multiple ipods on same computer" i believe it is, so i can get the help i need. thank you.

Wow. That's annoying.
Why not just post your question rather than post this topic referring to another? Now, if someone wants to help you, we have to search for it.

Similar Messages

A complaint in the hope of a solution, or at least some attention.

On May of 2011, an update to X.Org was pushed into core that made working with a netbook very difficult. I have an acer with 250gb HDD, 2GB RAM and a 1.6Ghz processor. For all but the most taxing tasks, it it quite snappy. The obvious limitation is the screen. Cue linux. There is a feature of X.Org that allows one to scale the screen upwards, to have a higher virtual resolution. I've used it to artificially upgrade video performance on laptops, desktops, and netbooks for a while. The syntax is as follows: xrandr --output [screen name] --mode [current resolution] --scale [decimal of scaling percentage] --panning [new resolution] For my 1024x600 screen, it is xrandr --output LVDS1 --mode 1024x600 --scale 1.25x1.25 --panning 1280x750
Arch was for a long time my favorite linux distribution. The update in march made panning not work any more; the mouse becomes trapped within a border the size of the origional screen, situated in the upper left. When this update was pushed through, the arch forums were ablaze with help threads looking for an answer. I was the only one motivated enough to post a bug report. Despite the attention surrounding it, and the fact that it makes netbooks very hard to use, it was flagged as a low priority and ignored by the X.Org package maintainer.
https://bugs.archlinux.org/task/24274
I did some testing to confirm it was not an intel driver update, but indeed the xorg package, and it is. I emailed the package maintainer, submitted a bug report, annoyed some devs on the freenode channel, and basically got referred from one dev to another as they all told me it wasn't their area of expertise and that I should fix it myself. Despite an attempt at teaching myself the entire X.org subsystem, I came up empty handed.The attention died down. I accepted that to use my netbook, I would have to switch distributions. I have been running gentoo with their X.Org updated to the same version and its working fine. It must be some patching done by the arch devs itself that broke it. Yes, this issue is that important to some of us that we will leave arch rather than have our computers crippled. Nowadays, all I hear about it is a tri-weekly comment on the bug report confirming it and asking why it has not been fixed.
Why hasn't it been fixed? I will try to fix it again, if any devs familar with X.Org would be willing to help me. I miss arch. I miss the speed. I miss the simplicity. I miss the adherance to the pilosophy of simplicity. May I ask that the people who maintain the package at least try to fix it?

sublimepua wrote:May I ask that the people who maintain the package at least try to fix it?
Sounds as if you try to fix this within the arch community when it is a x.org problem...
Have you tried reporting the bug upstream?
https://bugs.freedesktop.org/

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple in the past asking letting me know a purchase had been made and asking if I had made the purchase, but the item listed has alway been a purchase that I had made. Since I had received similar emails in the past, I didn't think anything of it. Because I had not purchased the item listed, I immediately clicked on the link in order to change my password, which has been suggested in authentic emails i had received from Apple in the past. The site I was redirected to was exactly the same as the Apple site where you go to change your password. I entered my userID and password and it stated a verification email would be sent, if it was not sent click "resend email." When I did not receive an email, after about 10 seconds I went to the Apple site and followed the SAME EXACT step on pages that were IDENTICAL to the FRAUDULENT website I apparently had just been at. When I clicked "Send verification email," I DID receive an email within seconds, which had a special link that brought me to a page where I could change my password, which I did. I later compared a legitimate email to the FRAUDULENT email and I DID FIND A DIFFERENCE, BUT IT WAS ALMOST UNNOTICEABLE unless you were really, really looking. I doubt it would be noticed by anyone if not comparing it closely to a real email. THE DIFFERENCE WAS AT THE BOTTOM OF THE AUTHENTIC EMAIL, THERE WERE THREE LINKS THAT COULD BE SELECTED - My Apple ID/Support/Privacy Policy. ON THE FRAUDULENT EMAIL THESE LINKS WERE NOT PRESENT!!! Just today I received an email from Apple stating my password had been changed today. I did not change my password today. When I changed after getting the fake email, I did not think about my SECURITY QUESTIONS!!! If you forget your Apple password, you are able to answer the security questions in place of your ID and you get a confirmation email. Even though I changed my password within a one minute when I did not get a confirmation email with a link to change my password right away and I went dierctly to Apple's site, apparently it was enough time to take all the information on my account - INCLUDING MY DEBIT CARD NUMBER, WHICH HAD BEEN REQUIRED WHEN I INITIALLY SET UP THE ACCOUNT!!! Today I received a call from VISA FRAUD PROTECTION asking about strange activity on my account and stating they were concerned and wanted to ensure I had used the account. I HAD NOT, AND ALL THE MONEY IN MY BANK ACCOUNT HAD BEEN STOLEN!!!!! I am writing this in hopes that many people will see it and NOT FALL VICTIM TO THIS SCAM. Please pay close attention to any emails you supposedly receive from Apple - If the links "MY APPLE ID/SUPPORT/PRIVACY POLICY," PLEASE DO NOT ASSUME IT IS AN AUTHENTIC EMAIL FROM APPLE. I suggest you immediately forward the email to apple, which I didn't do because this happened days ago. Nothing was taken from my money that was already on the Apple account, and nothing had been taken from my checking account. I guess I assumed there had been something wrong with the link in the email directing me to where I could change my password, plus I had gone to the valid Apple website and changed my password for real, and I guess I was thinking that changing my password would prevent someone from being able to acces my account info. PLEASE DO NOT FALL VICTIM TO THIS SCAM AS I DID!!!!

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

Need advice using different macs together + macpro users: Attention Please!

Hello to all Logic-freaks:-)
I'm new on this forum and have a couple of questions.
For now I'm working on PC with CubaseSX3 mainly and I'm tired of software and hardware issues(worked on G4 3 years ago but finances led me logically to pc...)
As I can't run into buying the new MacPro(wich I want to) I thought getting a MiniMac or new Imac with Logic Express, so I could learn the new soft and MacOSX's working flow, while getting my actual PC-projects done, and then get Logic Pro and bigger machine Mac.
I wonder if:
1.) I have a Imac and then a MacPro, can I use the Imac as a node and the screen of the Imac as a second screen for Logic Pro on the MacPro?
2.) I have a minimac and decide to get an Imac extra instead of a Macpro, could the Imac accept the minimac as a node,or is the node-thing reserved to Macpro's(Or Powermac G5's)
Besides that I have some Windows-only apps and plugins wich I want to keep and if I first buy a "little" mac like mini or Imac I know I could run Bootcamp and link the machine,using pc-vst plugins with the bigger Macpro to have a kind of "cross-OS"-power setup.
BUT, attention to all of you considering buying a Macpro:
I just browsed through this forum for XP on mac and I followed a link,leading to a benchmark of XP running on Macpro(and talking about the future Quad-core also) and XP running on Intel Conroe's(same as Minimac and Imac,if I got it right?): now look at the conclusions and you will see that the Single Conroe Dualcore OUTPERFORMS THE DOUBLE XEON DUALCORE when rendering and encoding/decoding mp3's, wich are the only applications in the benchmark related to audio-processing, and that could be the Fully Buffered Memory in the Xeon's causing latencies(wich I happen to HATE when it's about music making on the computer)....now that brings up some serious doubts in me, wich lead us to the third question:
-Knowing this, I'd like to know from as many Macpro users possible, if they are experiencing latency troubles or any kind of hardware related trouble in using large sessions,with lots of audiotracks and virtual instruments?
Knowing that the tests were performed with Bootcamp, could there be a significant difference under OSX?
Does this mean I'd have to wait some kind of hardware/driver update?
How is the stability with the new Macpros and Logic(or other softs) anyway?Are their lots of crashes due to the freshness of the product?
Here's the link to the benchmark,go through it,and read the conclusions:
http://anandtech.com/mac/showdoc.aspx?i=2832&p=6
Thank you all for your time,I'd really appreciate to get as much input possible,because the computer issues I went through last months were horrible and I hope going to Mac will change this,
Best Regards,
Biggnik

There are several questions there, and several misunderstandings.
Some answers to some of the questions:
- no, you can't use the screen of the iMac as a second screen for the Mac Pro
- yes, you can use almost any recent Mac as a node, but it's best if the nodes are connected with gigabit ethernet. Logic Node (Distributed Audio Processing) has some significant limitations - it's best overall to get a fast computer, and not use Distributed Audio if possible.
Now for the misunderstandings. Do not confuse rendering and encoding/decoding MP3 with 'audio'. It's got little to do with the kind of processing involved in Logic. And don't confuse RAM latency with audio latency. RAM latency has no effect on audio latency.
Latency in a DAW, whether you're referring to monitoring latency recording audio, or latency playing virtual instruments, is almost entirely determined by the size of the audio buffer used. A much smaller component of the latency is the latency of the link to the audio interface (usually Firewire these days), and the inherent latency of the A/D and D/A converters in the audio interface.
Quad G5 2.5Ghz 4.5GB 2x250G, PB 15" 1.5Ghz,80G,1.5G Mac OS X (10.4.7) Logic Pro 7.2.2, Focusrite Saffire...

ICal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?

iCal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?

UPDATE: I had 36 Safari windows open and minimized on the dock from my last session; 20 of those windows failed to open b/c Safari "couldn't find the server"; I just went to the URL bar of all 20 pages and clicked return, and all 20 pages loaded perfectly, without dropping any images or losing formatting. This is a puzzle!!!

HP Color Laserjet 3550 - the "attention" light won't turn off

I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off. It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in. It was a real easy fix, I pulled the page out and now the "attention" light won't turn off. So I can use the printer at all. I've had this printer about a year. I purchased it used. I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router. I've opened up the printer and removed the casing (the plastic apparatus on the door) and replaced it. The router is a 2Wire HomePortal 1800HG. I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix. Now a simple stick like this and the light just wont' go off.

ShlomiL wrote:
HI Vern,
Where did you bought the printer? may you bought it from a different region than your current one?
What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
I bought the printyer in the US and the cartridges also came from the US, probably no the same state. Cartdridge # 97, black # 96. I don't see a product number. This is the same # that was in the printer before and the same one I always used. As soon as I pull it out the light goes out, and on again as soon as I install it. This is before the printer even cycles through it's "new cartdridge" routine, if you know what I mean.
thanks for the reply

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Hp laserjet printer p11o2w attention light in on continously

the attention light on my laserjet printer p1102w is on continouly (there is nopaper blockage) and the printer will not print. The printer is 2 years old.

Hi @flur ,
I see by your post that the attention light is continuously on and you unable to print anything. I can help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
You can find the blinking light pattern in this document and the solutions appropriate to the pattern you are experiencing. Blinking Lights on the HP LaserJet Pro P1102, P1102w, P1106, and P1108 Printers.
Reseat the toner and remove the paper from the paper tray and reseat the paper again.
Remove the USB cable temporarily and try and print a hardware self test on the printer. If using a USB connection.
Were you able to print the test page, or is the attention light still on?
When you turn the printer on or open the top cover, does the printer make a noise?
Are you using Genuine HP Toner?
What are the toner levels?
How is the printer connected? (USB/Wireless)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Drawing attention to an FP object DId YOU know this?

Often when we are walking a user through filling out some required information we want to direct their attention to a particular control. The traditional wasy of oing this is to use "key focus" and if more "help" is required maybe change a string control with instruction saying "please fill in your name!". If you really want to get fancy you may even change the background color.
There is now a new approach available but I am not going to tell you what it is (yet). Instead I'll show you!
Run the attached VI (in LV 8.6) and press the highlight button.
The approach I used is in the code but I hid it so you can first ask yourself "how would I have done that?"
So did YOU know this?
Ben
PS To find the answer in the code, please rember that I don't use sequence structes unless I have a reason.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Solved!
Go to Solution.
Attachments:
Highlight.vi ‏9 KB

sth wrote:
From reading between Darren's lines, the method existed previously and thus if Ben saves a copy for previous versions it will work and the method can be cut and pasted to VIs and used in other versions. Ben, can you save a version 8.5 of this and see if it works and then post it? It would be a nice tool and some of us are stuck at 8.5 until further notice.
Oww you are sharp Scott!
Here it is saved as a invoke node. I did not test it since my 8.5 and 8.6 machines are unique boots of the same machine. If it works we may be able to go bak fartehr than 8.5.
Let me know if it works!
Ben
Message Edited by Ben on 01-29-2009 07:56 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Highlight.vi ‏6 KB

Frustrated with the lack of Support and Attention to the Thunderbolt

I was under the impression when I upgraded to the TB, that it was/is the "Flagship" for 4g Android phones (at least it was back in March). Unfortunately, that's not the case and I should of kept my Droid X a little longer.
Although the Droid X is not 4g, the device now has Gingerbread and seems to be getting a lot more attention from Verizon, then the TB..
I marked this down as lessons learned.

The DX is a great device even by todays standards. Anything that is as solid as the DX that has the latest OS is a keeper in my book. I to did the exact same thing and " upgraded " to the Thunderbolt but quickly regretted that choice. I got the TB the day it was available and figured I'd deal with some issues. I even went as far as Emailing HTC and calling VZW on a regular basis whenever I had an issue they might want to be made aware of but that got me no where. Then the update came out and that seem to add even more issues. So I threw in the towel and got the Droid Charge as a replacement for the Thunderbolt. I don't email HTC I have called VZW a couple times and that's it. Sure it's a Samsung and it might never get an OS update but for now it's a actual upgrade as apposed to the Thunderbolt.

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me. :)

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me.
I had changed this a long time ago, so I don't remember how. It was done on an older computer and carried over to my new one. I think it was done through the terminal...

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Attention on USE Oracle SQL Developer 4.0 (4.0.0.13.30) EA3!!!!

I use this new version and i find that, for example, if you want to add a datafile to a tablespace with modify tablespace window in DBA he try to drop all the other datafile!!!!
INCREDIBLE!!!
Pay attention!
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_1/sr3.data1';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_10/sr3.data10';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_11/sr3.data11';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_12/sr3.data12';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_13/sr3.data13';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_14/sr3.data14';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_15/sr3.data15';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_16/sr3.data16';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_17/sr3.data17';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_18/sr3.data18';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_19/sr3.data19';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_2/sr3.data2';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_20/sr3.data20';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_21/sr3.data21';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_22/sr3.data22';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_3/sr3.data3';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_4/sr3.data4';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_5/sr3.data5';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_6/sr3.data6';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_7/sr3.data7';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_8/sr3.data8';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata2/sr3_9/sr3.data9';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_23/sr3.data23';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_24/sr3.data24';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_25/sr3.data25';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_26/sr3.data26';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_27/sr3.data27';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_28/sr3.data28';
ALTER TABLESPACE PSAPSR3
DROP DATAFILE '/oracle/PCC/sapdata3/sr3_29/sr3.data29';
ALTER TABLESPACE PSAPSR3

This is a horrible bug, one that should have never made it out, even to an EA.
A few notes:
the teams involved are reviewing and updating the test scripts to ensure this doesn't happen again
it's important that you always review the generated SQL/DDL and test/approve it before using it in production
this has been fixed for the production release
This is about as bad as it gets, and I'm sorry that this one got out.

Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

There is no free version of CS2. There is only a special version of CS2 available for people who purchased it and need to reinstall it.

Help, I have the zinio app, the golf magazine app in my newstand, however I cannot access the magazine, it keeps coming up, attention an unknown error has occurred. When I push ok, it comes up 4/6 more times,

I have the zinio app, the golf magazine app in my newstand, however I cannot access the magazine, it keeps coming up, attention an unknown error has occurred. When I push ok, it comes up 4/6 more times, why is this happening, please help me?

Try here > iTunes Store: Purchasing and managing auto-renewing subscriptions

My iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

ATTENTION!

Similar Messages

Maybe you are looking for