ATTN K8N Diamond Plus Users - SLI problem

i need help diagnosing a problem:
i installed this board last night, transplanted my a64 4000+ along with 2 7800gt's and a brand new antec 550w psu. i did the live update bios flash (dont recall what version i am running now) got my e/n and audio drivers in place etc.
when i enable sli, the machine freezes when i fire up a game. both cards are plugged in properly, i tried swapping the slots they were sitting in, i tested both cards individually and they are good, i reversed the sli bridge just in case, reverted to fail safes in the bios,
i cannot play games in sli mode, in single card mode i can (I THINK... i am afraid this might be a heat issue, but i put plenty of fresh arctic silver on my proc, FEAR seems to freeze regardless if i am running sli or not..i will have to double check when i get home from work)
has anyone experienced anything similar? i am running fresh drivers and this is my first sli build so maybe i am missing something... i have been racking my brain for the last 12 hours, i dont think its the ram, could it be the northbridge chipset driver? i installed the one off the disc, but i didnt check the site for a newer one...
thank you so much for your time.

Quote from: kakarocht on 08-February-06, 13:58:02
Do not used liveupdate to flash the bios. Used from the program files itself. Refer from my sig on the flashing the bios. BTW create your own sig and gives more details about your peripherals and psu in details. What my concern is your PSU problems. Could you gives more details your PSU? Have you tried to install new drivers from NVIDIA??
the psu is a brand new antec 'true power 2.0' unit that i bought from newegg...in bios the 12v rail is showing 12.3 which might be a little bit high...but it is stable for what its worth...
here is my setup, i will create a sig shortly:
2gb PQI ram DDR400 running at stock speeds, not sure of the latency but i am thinking cas2
A64 4000+ Clawhammer proc running at stock 2.4ghz speed, 1mb cache
MSI K8N diamond+
dual 120gb maxtors
sony dual layer 16x dvd
stock cpu fan.
shitloads of AS7
another curious fact:
since the upgrade FEAR doesnt want to work at all... DOOM and COD2 both work in single card mode...but FEAR will freeze on me mere seconds after the first map loads...
i dont know what the culprit is...but i bet im gonna kick myself when i find out...
im gonna go re flash my bios now...
thanks for the input, its always greatly appreciated.

Similar Messages

MOVED: K8N Diamond Plus Motherboard overclocking problem.

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=93776.0

Quote from: TimeReaper on 15-February-06, 09:15:17
I know this board can reach 300+ by reviews by Tom's Hardware. But I was wondering how I could get my FSB up there? I can't seem to get past the hurtle at 270. Anything above this will make the system fail to start up and I have to clear the BIOS again.
I lowered the HT to the equivalent of 3X, and CPU Multiplier to 8X using a venice core 3500+. I even tried adding voltage to the HT. I'm wondering if I'm missing something in this equation that stops me from getting 300+ FSB? The overclockable items are too many and unexplained.
If someone could spread some light on what else needs to be done, please tell me.
My system is as follows.
MSI K8N Diamond Plus
AMD64 3500+ Venice
OCZ DDR600 Platinum Elite
520 OCZ Powerstream
2x Samsung 200G@Raid 0
Zalman CNPS 9500 LED
Sapphire GTO2
Hi dude,
I have the similar problem as well. Sounds like you are in the bad shape, but yeah, try to loose your RAM settings. First, all settings auto seem to be good, but it's actually not the case. You have to set TRC and TRFC as higher than 12 and 14. I am seeting those to be 14, 18, and it seems to be working great. It will be better to set the burst length as 4 beats. I don't like this board coz I can't set the drive length to be weak instead of normal detected by the Windows. My system can post, but I got problems of playing 3D demos and games, which looks like it's the problem of motherboard. Not mature enough.
My rig:
AMD Athlon64 3700+ @ 2.7GHz
OCZ Platinum Elite DDR600 2.5-4-4-10 Dual Channel
Leadtek PX6800GT @ 425/1200 at 2nd PCIe slot
2 x WD 120GB 7200RPM + Samsung 160GB HD

K8N Diamond Plus Power on problem

I have this problem with the board where I shut down windows, and it does shut down by the way. But the strange thing is that right after it powers down, like say a second, it restarts itself as if I pressed the power button immediately after. Though I can correct this by pressing power again while it is still going through the motherboard check ups, I was wondering if someone had similar problems. If so, if there is a solution to correct this bug?
I am currently using the 1.16 version patch.

CPU=Opteron 170
Motherboard=MSI K8N Diamond Plus
Videocard=Sapphire X800GTO2
Soundcard=Creative X-Fi
Hard drive= 2x RaptorX 150GB @ Raid 0
PSU=OCZ Powerstream 600
CPU Cooler=Zalman CNPS 9500LED
3x 80mm exhaust fan
1x 120mm intake fan
1x Vortex 2 Intake crossblower
1x Slot Exhaust
1x Antec Vcool Intake
I'll check on that wake lan thing.

K8N Diamond Plus audio out problem

Hi,
I'm having an issue with the audio out on my K8N Diamond Plus. The rear audio out works fine when left jumpered. However when I connect the front panel audio connector to the mother board the volume of the rear audio out drops to an almost in audable level while the front panel audio works as expected.
At first I thought the rear audio had been completely disabled until I tried turning my speakers all the way up.
Is there a software issue here?
FYI I'm trying to use the front pannel audio connection on a Silverstone TJ07 case.

hey - mikein_texas here - i have same board but with a Centurion case -
couple of things i ran into - maybe will spark some ideas
initally i hooked up front panel audio and got nothing
then i read on page 2-19 of manual that 5-6,9-20 have to be jumpered for rear audio to work
but that means no front audio which was a drag - but solved that prob with usb mike and headphones
apparently unless i am reading it wrong and someone please correct me if so, but you can have front audio OR rear audio
BUT not both
again look at page 2-19 in manual and specifically at text in grey box in middle of page
Yukon PXE 2.01 ( 20040406 )
Pre-boot Execution Environment PXE v.2.1
DLink Cable Modem - model DCM-202
ViewSonic VX2025WM 20.1" Widescreen TFT LCD - 1680x1050, 800:1, 8ms
MSI K8N Diamond Plus Socket 939 NVIDIA nForce4 SLI X16 ATX AMD
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive Model SFD321B/LBL1
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s
XFX Geforce 7600GT PV-T73G-UDD3 Video Card
SAMSUNG 16X DVD±R DVD Burner - 5X DVD-RAM Write and LightScribe Black ATA/ATAPI Model SH-S162L/BEBN
COOLER MASTER Centurion 532 RC-532-SKN1 Black Computer Case
AMD Opteron 165 Denmark 1000MHz HT 2 x 1MB L2 Cache Socket 939 Dual Core
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400
Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
Ultra ULT31849 X-Finity 600W Power Supply
Cooler Master A12025-12CB-5BN-L1- 120 x 120 x 25mm 1200rpm, 43cfm, 22dBA, LED, 3-pin - front intake case fan
Scythe S-FLEX SFF21F 1,600rpm, 49.0CFM, 20.1dBA, 3-pin, 120mm S-FDB Bearing - rear exhaust case fan

K8N Diamond Plus and SLI

I have the Diamond Plus MB with (2) MSI NX7900GTX-T2D512E Graphic cards and the SLI bridge connecting them. Everything runs great until I enable the SLI in the NVidia display properties. I check the box and as soon as I hit the apply or ok button my system reboots. When I check the display properties after reboot the box is unchecked. Graphics driver is ver 84.43 I really expected the cards to work great with the MSI MB, but so far that's not the case. Any Ideas?

^ Echo the power-supply response. I'm not sure what the specs on your PSU are, but you might want to check it. If it's dual-rail, then you could be having a problem. Random reboots when graphics are involved usually means PSU.
Also make sure your PCI-E connector on your motherboard has power. There's a 4-pin connector on the upper-left of your first PCI-E x 16 slot that needs power if running dual graphics. Check your motherboard manual if you're not sure which one it is.
Go here: http://www.slizone.com/object/slizone2_build.html
.. for a list of compatible power supplies for your setup. I'm running a Silverstone Zeus ST56ZF which is one of the few PSU's certified for SLI 7900GTX's, even though I'm running a single 7900GTX, so I can overclock the CPU and GTX all I want.

K8N Diamond Plus and IEEE1394 problem

I connected the supplied IEEE1394 bracket to the correct connectors in the mainboard (as described in pg 2-20 in the manual).
the "squarish" port worked fine, but the "longer" type just won't work!
what happened? in the manual, it says one of the connector is optional. but in my board, there are 2 1394 connectors.
does it have anything to do with the problem?
thanks

In my Diamond Plus board there were two separate brackets that came with it.
One - for IEEE 1394 (Firewire) usage has two different shaped connectors on it, two cables coming off of it, and each cable has a GREEN connector with a big nub hanging off the side that only allowed them to be plugged into the IEEE1394 ports on the motherboard. You could NOT accidentally plug those into USB ports because they would not fit.
The other, for USB and diagnostic LED, has two same sized USB connectors on it, and four LED's. The USB ports have two cables that come together at a YELLOW connector. The LED's have a single cable that comes together at a BLACK connector. It looks to me like if you inverted these connectors you could get it to fit into the IEEE jack on the motherboard, but they don't belong there.
Make sure you're using the right brackets.
Good Luck,
DJG
NOTE - Now that I reread this, it sounds like you might be saying that you got the two connectors to fit into the motherboard fine, but that one of the ports on the bracket still doesn't work. Is that what you mean? If so, I have nothing to offer except try switching connectors on motherboard and see if problem travels with bracket connector or motherboard port, try new bracket, etc...).
DJG

New K8N diamond plus questions please help.

Hi all well i am new to this msi site and am thinking of buying the new MSI K8N Diamond plus motherboard, the problem i have is that i have been a fan of ASUS and have had there last 3 SLI motherboards of which i have not been happy with.
Well i am totaly into overclocking and have an Opteron 165, balistix ram, 600w Enermax PSU, 2x Gainward 6800gt's,
what i am looking for is a motherboard that does what i says it will do, yes the asus a8n32 was a great motherboard but has a limitation on the voltage if useing the new E4-E6 stepping cores of which would only give a max voltage of 1.58v of which the asus spec said 1.76v.
What i am asking you chaps is is this a great motherboard, can you play with all the coms settings without any limitation, or do you think that the DFI motherboard is better.
If you can let me have some info on this motherboard that would be great, as i can not seam to get any reply from MSI about some information.
what i am looking for is what is the max CPU voltage and is there any limitation on it for some chips.
what is the max voltage for the ram
what is the max voltage for the chipset.
any help on this would be great.

Quote from: Stick on 23-February-06, 17:46:08
there is no mobo that alows 4V for the memory. i think the DFI goes up to 3.4V and you can use a DDR Booster to get to 3.8V. the only mobo that is capable to pass 3.3V is the DFI since you can have the choice to select from which rail the memory will be powered (the 3.3V or the 5V). you don't have that option in any other mobo.
Hi thanks for the mail but i have just copied this from msi about this motherboard, see below.
1.Adjust CPU FSB Frequency:
You can adjust the desired "CPU FSB Frequency" by using "+,-" key. The default value of AMD Athlon™64 is 200MHz. The maximum value is 450MHz.
2.AMD Overclocking Configuration (CPU Ratio):
If the CPU is Athlon™64 FX series, the ratio range is from 4 to 25.
If the CPU is Athlon™64 series, the ratio should be set according to its model number. For example, the ratio range of 3000+ is from 4 to 9, and the 3200+ is from 4 to 10.
3.Adjust Extra CPU Voltage:
This is for adjusting CPU voltage while overclocking. Following the CPU default value, the maximum is 1.8V. The interval is 0.05V.
4.Adjust DDR Memory frequency:
The Memclock is the major part which has four different frequencies to match many kinds overclocking memory modules. The memory frequency settings includes DRAM/FSB=1/2, 2/3, 5/6, 1/1.
5.DDR Memory Voltage:
This is for adjusting memory voltage while overclocking. K8N Diamond Plus has a special design.We use jump to distinguish two level arrangement of voltage. In this way it can get maximum 4.1V for overclocking modules. As you can see the below pictures, the left one is the standard mode when jump hat is located at the top postion. The default value is 2.5V, and the maximum is 3.2V. The interval is 0.05V. As the right one, it is overclocking mode when jump hat is located at the under postion. The default value is 3.2V, and the maximum is 4.1V. The interval is 0.05V.
What i am asking is there any limitation on the cpu voltage like the asus a8n32 as this had a max voltage of 1.58v due to it having a limit put on it by recomendation of amd.

Someone tell me it aint so: K8N Diamond Plus nForce4

simple really work were buying a job lot of computer bits and pieces so i thought might as well bung a few things on for myself and take advantage of the discount, so a new mobo, memory, and graphics card ive got more than enough spares hdd, fans, dvd/cd drives
took all the stuff home tonight thought i would stick it altogether leave it installing with baby sitter and go pub. So build it and then look at it strangly thinking im missing something then it hits powersupply, bugger how could i forget the powersupply have no fear i'll just take it out of my other rig. so out it comes and i start connecting it all up then i come accross the 12v cpu connecter and i begin to search for a 4 pin connection on my shiny new mobo and what do i find a bloody 8pin one.
The mobo in question is MSI K8N Diamond Plus, nForce4 SLI X16, Socket-939
The power supply in question is found in my sig
My questions is am I screwed, will i have to wait till monday to order a new power supply then wait till it gets delivered or can i just ignore the little factor of 4pins into 8 doesnt fit slap it in switch on and not have the computer start blowing smoke at me. im suspecting a long wait till monday and a longer wait till delivery but stranger things have happened in the computer world

Quote from: thorpe on 17-June-06, 18:13:01
i'll be honest i was thinking your all bonkers
that's not a nice thing to say
Quote from: thorpe on 17-June-06, 18:13:01
got the wife to press the power on button
roflmao this is the best part. i think we should all make our wifes/girlfriends (or the male equivalents) to push the button after a heavy OC or after messing around with the system. that way you can blame it on them if something happens

K8N Diamond Plus 2x16... Arrival Imminent?

I noticed a strange thing when I was looking/pricing for my next mobo - SLI, naturally. I know that the Diamond Plus 2x16 isn't out yet but I thought I'd have a look just to "ballpark" my budget (Merry Chirstmas to me ) & I noticed something odd.
There is not a MSI SLI board to be had anywhere from 3 of the "BIG" sites that I've shopped so far - NewEgg, ZipZoomFly or Monarch. It is quite unusual for all to be out of a particular product at the same time. The single PCI-e boards are available at all 3, however.
Hopefully, this means that the K8N Diamond Plus 2x16 SLI is about to "hit the street"...
Just my contribution to the rumor mill.

Quote from: Tiresmoke on 26-November-05, 00:20:47
When you get one maybe you could take a couple close up pics of that new chipset cooler. I think it looks pretty nice but MSI did not post a good closeup of it so that folks could really get a gist of what it is.
It would also be pretty cool to get some compairison between how well it works versus the existing cooling solution.
Looks like a heatpipe thing... similiar to what some others are starting to use.
From what I've read, they can work pretty well - as long as there is sufficient air moving through your case that is. If not much air is flowing they supposedly get pretty damned hot. That might be something that people running watercooling might take note of, if they're not running fans in their cases.
In any event, if I had one in front of me right now ready to install, the first thing I'd do is completely remove it to see if there's a good amount of thermal goo... & then promptly replace it with Artic Silver.
I've checked, then replaced the thermal compound with AS on every new board that I've gotten before installing since my ABIT days - at the time they were putting little or no compound on the chipset. Good thing it's become a habit - there wasn't exactly what I'd call a copious amount on my Neo either. Anyway, there's always benefits to doing that straight out of the box for obvious reasons.

K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

Hi there!
I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
See here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
and here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry. When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen. When i disable SLI mode it crackles less, but it still crackles. Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
My question is:
Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem. Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

What's going on guys.
I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
LPB
P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

K8N Diamond Plus BIOS problems

Hi , just replaced my lanpartyUT sli-dr expert with K8N Diamond Plus mobo and having problems allready :D
Just finished overclocking and now running at (250 x 11 x 800mhz x 1.300v+0.2v x dram/fsb 1/1 x 2.80v)
Memory timings --> (3,7,14,3,2,8,2,2,1,3,200mhz(15.6us),1,16x,7x,7ns,5ns,0clk,DiCC:enabled,1T,8beats,reduce 00%... ...)
The problem is "BOOT" related... System is PRIME95 stable , but still when trying to "restart windows" or "reset" the system wont BOOT !!?
When i shutdown and then power up, the system boots perfectly !? What can cause this kind of behaviour :/
I have OC:d quite many systems , but this is new even to me

The windows core program shows htt link 1000mhz exact. Memory settings are all "manually" adjusted. Cpu vcore is 1.300 & extra voltage 0.2v=1.5v.
All ECC options are disabled.Hdd:s adjusted manually. Should i rise the (NB) voltage , or does that have anything to do with this !? Maybe not at 250fsb only :D Cool & quiet is disabled naturally :/ All fan controls disabled , connected directly to psu. No D.O.T,s or anything automatic overclocking enabled. The (L cache & data cache scrubs) are strange to me, so those are disabled.After flashed bios , enabled boot sector protection. All the mobo power connectors are in use (24pin+8pin+4pin) Could it be that the memory modules should be used on ports 3 & 4 (now on 1 & 2) ??
The mushkin redline xp4000 memory specs Fortron Epsilon 700W Psu specs
Output Voltage Min. load Max. load      Load Reg.     Ripple & Noise
Frequency:   500MHz +5V     0.5A     30.0A     +-5%     50mV P-P
Latency:   3-3-2-8 +12V1   0.0A     18.0A     +-5%     120mV P-P
Parity:   Unbuffered +12V2   0.0A     18.0A     +-5%     120mV P-P
Voltage:   2.6V-2.9V +12V3   0.9A     18.0A     +-5%     120mV P-P
Module:   128MX64 +12V4   0.1A     18.0A     +-5%     120mV P-P
Chip:   64MX8 +3.3V   0.8A     36.0A     +-5%     50mV P-P
Pins:   184 -12V     0.0A     0.8A     +-10%     120mV P-P
+5Vsb   0.0A     3.0A     +-5%     50mV P-P

K8N Diamond Plus Video problems

When ever I run a Game or any 3D program like 3DMark the video locks up I removed 1 of the card to test for SLI problems and get the same result pixilated FPS drop to 1 from 50-60 FPS and the system reboots after about 2m
Only think I have not done is update the Video cards Bios I have a friend that is having the same problem only thing that is different is he has running Win XP SP2 and has the n516 model video card and he did the bios update and after he did the Bios on the video card the system does not lock any more but the video get pixilated even just sitting at the desktop and he all other drivers are up to date
Mainboard K8N Diamond Plus V1.0
CPU AMD Athlon 64 X2 4400+ Toledo
2 CORSAIR 1GB DDR 400
2 eVGA 256-P2-N517-AX Geforce 7800GT 256MB
Antec NeoHE 500 ATX12V 500W
Antec LifeStyle SONATA II
Microsoft Windows XP Professional X64

Quote from: jzastrow on 19-February-06, 23:34:02
When ever I run a Game or any 3D program like 3DMark the video locks up I removed 1 of the card to test for SLI problems and get the same result pixilated FPS drop to 1 from 50-60 FPS and the system reboots after about 2m
Only think I have not done is update the Video cards Bios I have a friend that is having the same problem only thing that is different is he has running Win XP SP2 and has the n516 model video card and he did the bios update and after he did the Bios on the video card the system does not lock any more but the video get pixilated even just sitting at the desktop and he all other drivers are up to date
Mainboard K8N Diamond Plus V1.0
CPU AMD Athlon 64 X2 4400+ Toledo
2 CORSAIR 1GB DDR 400
2 eVGA 256-P2-N517-AX Geforce 7800GT 256MB
Antec NeoHE 500 ATX12V 500W
Antec LifeStyle SONATA II
Microsoft Windows XP Professional X64
I have a similar system
as you can see. you need 550 minimum to run it.
also what video drivers are you using?
what was the order of your xp install?
where is your page file?
what config are you hdd's in?
when was the last time you ran dxdiag? (post log here)
when was the last time you defragged? adaware spyware removal?

2 'problems' with the K8N Diamond Plus

Hi there.
I just bought a K8N Diamond Plus and I'm having some troubles installing my system in conjunction to my Decklink Extreme PCI-E ( http://www.decklink.com/products/sd/ ).
Here's my configuration:
MSI K8N Diamond Plus
AMD64 X2 4400+
ROSEWILL 6600GT PCI-E VGA
Decklink Extreme PCI-E
2GB RAM ( 2 x 1gb) Kingston
OCZ-520 12U Modstream Power Supply
plus 6 HD's (7200rpm) and 1 DVD-+RW
The problem is, when I try to initialize the system with the Decklink, which it's a PCI-E 1x, it just don't boot. Neither putting the Decklink on the 1x, nor in the 4x slot and nor in the 16x.
The Decklink is working just fine in another system and doesn't seem to be a problem with this card.
I wondered if there's any limitation in the K8N Diamond Plus with working with the ROSEWILL 6600GT PCI-E VGA plus the Decklink.
=======================
The other thig is that when I take off the Decklink, the system boots normaly but a message appears while booting: "Not enough space to copy PCI option ROM 00:13:00".
And I don't have a clue about what's going on.
=======================
Please enlighten me with this questions if possible.
Thank you very much.
Greets.
Igor Bineli

Remove the battery away for 10 minutes, clear CMOS, start the system to load setup/optimized defauts in bios setup. After that, disable all onboard items in bios setup that you won't to use. Save and exit.
Plug ROSEWILL 6600GT PCI-E VGA card, and start your system to check if there is the error message. If there is, borrow another brand VGA card to do a test.
Besides, update your MB bios and driver version to the latest one.

K8N Diamond Plus boot problems

I just built a new computer and it was working fine for about a month. Then one morning when I started it up it wouldn't turn on. The front LED's turn on, and the fans all start, but nothing ever shows up on the screen. The set of four lights on the back show R R
G G
Nothing has changed since the pc was working fine. I haven't changed any bios settings or added any hardware or software. I did try resetting the bios using the CMOS jumper, but this didn't change anything. The lights on the back show that it is initializing ide drivers, but in the manual it also shows that it is one of the last steps in the start-up process, so i would think that the memory check, processor count, msi logo ect. should appear on the screen like it normally does. However, the LED that blinks when the hard drive is active never lights up, but when i open the case and feel the hard drive i can feel it vibrating like it is functioning properly. And if it is a hardrive failure, then shouldn't the bios still start up and show up on the monitor? I have heard that many weird problems can be attributed to the psu, but I have a 500w Antec Smartpower 2.0, which is a pretty reliable psu from what i've heard. Any help or suggestions would be welcome. Also, how would i test individual components to find out what is causing the problem? I think since everything is within a couple of months old i should be able to get replacements. Thanks in advance for any help.
System Spec:
MSI K8N Diamond Plus
AMD Athlon X2 3800+
Nvidia 7600 GT
Maxtor DiamondMax 300gb ultra16
2gb Corsair Twinx xms ddr400
500w Antec Smartpower 2.0
Thanks!!

Quote from: Mikeyp926 on 15-August-06, 12:58:47
You guys are awesome! Thanks a bunch for the info on ram, I feel like I understand it better and I looked and found all the stuff in the bios that you guys were talking about. I'm downloading speedfan currently and will go install it on my other computer. I tried swapping the sticks of memory, but i ran into the same problem i did before. So i'm assuming that i can safely say one stick is faulty right? And do any of you guys have any experience trying to get replacement memory from crucial? I'll have to go poke around their website also. Well, thank you all so much for all of your help. This is my first home built pc and i'm trying to learn alot about them. Once everything is running properly i may try a little overclocking, but i'd like to get everything running smoothly first. Just out of curiosity, what would make a stick of ram go bad like that? It was only a month old, and i thought crucial xms was pretty good ram. Is it not? or did i just get unlucky?
Thanks a ton for all the answers, this forum is the most helpful one i've ever seen. thanks!
Maybe that you're unlucky to get those faulty RAM. Crucial RAM is not bad if you get the better performance if you're ocing your PC if or else get the value RAM if you don't oced.
Quote from: Svenomous on 15-August-06, 12:55:00
Speedfan 4.29 works with the K8N Diamond Plus. I have it running now
Ok. Get it but not sure about MBM as it seems that it don't support it. :p

K8n diamond plus sli link card

bought a open box k8n diamond plus from newegg and it didn't come with a sli link card
to go between the 2 video cards.
where can I buy one?
thanks

newegg was of no help.
I got ahold of msi and they're sending me one.
thanks.
it was a open box board that turned out to be just a board LOL.
i'm still looking for the full install of the creative software.
the drivers load but none of the base creative software is in the
msi downloads.
so digicell can't fine the creative programs.
i upgraded the bios to 1.20 and am waiting for the sli bridge
so i can put the other 7900gt ko 512meg card in.
runs good with just one, it should run even better when both are in.
thanks again.

ATTN K8N Diamond Plus Users - SLI problem

Similar Messages

Maybe you are looking for