Attn: KellyRay (and whatever other name you want to use)

Sir,
You have been making a complete fool of yourself. By starting a personal vendetta against me, you have completely missed me and have affected the members of the forums and the other moderators.
I logged on today to find out that you have been busy making a nuisance of yourself, and there was nothing left for me to do.
If you continue in this childish game, we will have no choice but you contact your manager at the FDA where you work and tell them what you are up to.
I would prefer that you crawled back under the rock you came from and this ended right here, but if you want to continue, we can take this out to the real world.
Richard

Hi,
Well I'm another person who can't help but comment. Though I did refrain from doing so last night when this all began. BTW, I am not a moderator!
Firstly, I read your initial reaction to Richard's reply to your post, and I honestly can't see where your problem lies! Many, many members have been greeted with the same "Car" post and many other members have used similar comments as a playful "Dig" (me among them) to coax more information from members.
Most (if not all) members realise that it is not malicious and take it in the spirit in which it is given, in fact I don't think I've seen another reaction like yours! To use an expression my daughter uses - Chill!
If you'd read the stickies at the top of the forum then you wouldn't have made your first post, as it added no useful information (it lacked any detail) to the thread starter's question, it was in fact pointless! It was also not clear whether you posted to give information or receive it!
BTW, you are not the only person around here who is either disabled or who has served their country in a war zone! I've drawn my own conclusions as to why you imparted the information as to your disabilty, and the fact you were a Gulf war veteran, but I consider myself too polite to comment further! Sorry mate, but I've been there, seen it, done it! (as have others here)!
However, I don't feel the necessity (nor have I in the past) to give any details on this forum!  
As for the following, I'm a little lost for words. For one thing, we are not all from the U.S or didn't you notice!
Quote
By the way, treating a federal employee is a federal offence and repeated threats of a known employee is a felony! I have reported your threats to the FBI, in all likelihood they will do nothing, but continued threats will! Also any attempt to access, backtrack, or modify in any way federal traffic is a felony.
I think I will treat this with the contempt it deseves!
Quote
I have reported your threats to the FBI
presumably, they'll act once they've stopped laughing!
I'm assuming that the posts that you made here were indeed "Federal Traffic" and carried out in your capacity as a worker for the "Federal" government. You were specifically instructed to post here? At least this is what you seem to be suggesting!
If not, then you seem to be backing your childish antics on this forum with a threat of intervention by the Federal Government (I could be wrong but that sounds like it may be illegal too) - Three words "Cloud Cuckoo Land"!      
Kellyray: It seems to me that your time and efforts would be better served if you directed them toward other, more important injustices. I would hope that you would reconsider this "Vendetta" against this forum.
It would seem to me, that you would selfishly deny the help given to many (thankful, and the vast majority are) users for your own misguided ends! Just remember, all forum members and moderators are volunteers! Any and all help is given free and is dependent on the willingness of members to help!  
There are plenty of things in this world it is possible to get extremely upset about. I would suggest that this is not one of them! I for one, have better things to worry about!
This post is the only comment I will be giving, I will not post again with regard to this matter!
Unless of course anyone asks me nicely  
Axel  

Similar Messages

  • Wouldnt it be so neat if when sending emails to multiple contacts that you could place a check mark beside the names you want to include in the email?

    wouldnt it be so neat if when sending emails to multiple contacts that you could place a check mark beside the names you want to include in the email instead of having to go back and search through contact list to add each recipiant?

    Hey docasman, 
    Welcome to the support forums!
    The error you are seeing is normal, all it means is that the list will be truncated meaning you will not be able to see the full list of people in the CC field but you can add more and it will send the message to all of them.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud.  Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

    Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud. 
    Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    That's what Firefox sad to me...I was Rich text editing,but I can
    not use copy paste on.
    I did the same site and Rich text editing with Opera,
    and there was no problem.
    I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
    Pleace,responde to me,I need to fix a problem.
    I hope you understanded my Engish!
    Thank you...

    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete
    See:
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

  • Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    Yes!

    https://support.mozilla.com/en-US/kb/Clipboard+not+working
    This extension will help you set the necessary permissions - Allow Clipboard Helper extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/852

  • I click on update though and it says do you want to update to iTunes 5 then I keep clicking download and nothing happens after.......

    I click on update though and it says do you want to update to iTunes 5 then I keep clicking download and nothing happens after....... Helppp ?

    By the way this is when I try to update to iOS 5 by clicking update after iPhone 4 is plugged in

  • I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

    Hi,
    When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How  do you want to use this disc', although the DVD was full of data. When opening these 
    lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD  opened well without any problems at all.
    Also, how can the System show to me 'How  do you want to use this disc' , in particular when  a DVD is non rewritable(DVD-R) and also contains data)?
    Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
    However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting  blank lightscribe discs I found that the disc were opened.  Also,
    non lightscribe discs were opened well.
    When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
    Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe  discs are unregonised
    Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
    I have done:
    Press the Windows logo key+R to open the Run dialog box.
    Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
    When you are prompted to confirm that you want to remove the device, click OK.
    Restart the computer.
    But the same prolbem is existing.
    yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
      mount ISO disc images into it, and not physical discs.
    Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
    NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there  a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
    the second is recognised. 
    Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of  what virutal CloneDrive is enabled or disabled.
    But when cliced on my problem didn't solve,
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
    which is always thrown in dust without caring at all. Also, its battery is
    always inserted even when it is fully charged while the laptop is plugged in to
    the main power supply.
    However, my laptop is either used on only battery, or on plugin. Also, it is
    kept from the dust.
    But, I really found that the battery of the Dell laptop
    still lasts about three and half hours, and there is no problem cooling fan is
    not oproperly preporly.
    I only remember one thing differently done on my laptop battery which is I
    charged it fully, then I stored it without using it for about four months, then
    when I reused it, I found it got worse over time. I.e. first time of using it
    after storing,I found it empty, then I charged it again fully, however, then it
    lasted about 2 hours, then 1 and half hours, next an hour, now it is only
    lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR Data
    CD/DVD-R LightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive
    'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
    is grayed out)
    Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
    read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
    NOTE: with CD/DVD Player is grayed out)
    Used CD/DVD±R/RW Non-LightScribe disc opens normal:
    Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
    With a CD,DVD)::
    My HP CD/DVD DVD±R/RW specis are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data
    diagnostic utility
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir
    C:\Program Files (x86)\Common
    Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir
    C:\Program Files (x86)\Common
    Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand
    http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion
    1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion
    1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type
    16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start
    2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
    0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
    LightScribeService Direct Disc Labeling
    Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
    LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description
    Used by the LightScribe software components to support 3rd party disc labeling
    applications using the LightScribe COM Application Programming Interface
    (LSCAPI). This service needs to run for LightScribe direct disc labeling to
    work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
    7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
    IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
    SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Winlogon\allocatecdroms
    0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel
    Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
    Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk
    /r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software which
    came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical
    drive, on a Dell optical drive, and all of them were opened well, although Dell
    optical drive did not have a lightscribe feature at all., nor third party disc
    recording software
    However, the problem is still with opening the discs LIGHT-SCRIBE
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with
    another one.
    I think there something needed to be done on the BIOS Of my HP
    laptop[[[A similar problems happened on my Desktop computer's optical
    drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
    My Desktop Computer) ---while my optical drive of my desktop was connected to
    the primary slave IDE, and the HDD was connected to the
    primary master IDE, the optical drive and hard disk are functioning
    well. However, I remember that while burning an image with Nero essential V: 5,
    something went wrong, and then the Optical Drive of My Desktop Computer
    (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
    BIOS, although it was still shown on the device manager as a
    recognised device. Also, it was listed on my computer, however, when entering a
    disc(blank or with data) into the drive, I found it was not recognised, and it
    opened empty(no files at it), although it contains data. Thus, I decided to boot
    to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
    still shown as installed on BIOS. However, the optical drive was not. Th I tried
    clicking on it on BIOS and then clicking on 'enter' to try to let the device be
    re-recognized. However, that made no difference. I had to take part my computer
    ,and then reconnected the optical drive onto the secondary slave
    IDE , and let HDD connected to the same primary master IDE.
    Then, I found that the problem solved and all discs became being read
    normally. Aslo, optical drive became installed on BIOS]]]
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

  • HT4436 I have 2 I phone which is using same apple id to back to icloud and restore it. I want to use different id on the one phone what can I do or change the id?

    I have 2 I phone which is using same apple id to back to icloud and restore it. I want to use different id on the one phone what can I do or change the id?

    Welcome to the Apple community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add a new account by tapping the "create Apple ID" button. (Settings > iCloud, scroll down and hit "Delete Account")

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • I have got a 1500 Kinetic Systems CAMAC crate and 3922 controller. I want to use it with LabView inst

    alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?
    Many thanks.
    Victor. I have got a 1500 Kinetic Systems CAMAC crate and 3932 controller. I want to use it with LabView installed in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Thanks

    alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?Victor,
    I couldn't find an Instrument Driver for the 3932 crate controler. There is a driver for the 3988: http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/045f8392cc4d1b01862568ab005fbb49?OpenDocument
    If you look at the driver it isn't too complex. Well ... actaully there are certain differences when using the 3988 GPIB controller that the driver takes care of that relate to correctly passing commands (FAN).
    If the 3922 controller is similar then maybe you can use the 3988 driver and modify it to meet your needs. I'm not familar with the 2915 Kinetic system so I'm not sure what would be easier.
    If you have a GPIB board, then you could try using the 3988 driver with your 3922 controller and see if you can modify the driver to get things to work.
    I
    've only used the 3988 and that was quite three years ago but it might be worth a try.
    Best of luck,
    Kamran - NI

  • Cannot repair Aperture Library, "which library do you want to use"

    When I open Aperture and hold down the option key I keep getting prompted for "which library do you want to use"
    and it lists my current library and two backup with a , .BAK extension on two different disks.
    So I cannot get to the repair options, I only get  "which library do you want to use".
    How can I get to the repair options?
    much appreciated.

    You need to press the key combination options-command to launch into the Library First Aid Tools:
    Hold down the options key ⌥ and the command key  ⌘ at the same time, while launching Aperture. And keep the keys held down firmly, until you are seeing the Library First Aid panel. Then select "Repair Library" from the panel.
    If you only hold  down the options key  ⌥, you will launch into the Library chooser panel to switch between libraries.
    What is the reason, that you need to repair the Aperture library?

  • Do you want to use RarGenie to open this file type??

    The short answer is NO!
    Another user of my laptop (honest) downloaded some software that changed our default search engines to searchmoose.
    I deleted the app, the accompanying "Install Mac" folder in the applications and reset all the search engines.
    Everything now seems fine, except for when I download a Rar file, I get a popup window asking "Do you want to use RarGenie to open this file type??"
    I've ran a CalmXav scan which came back with nothing. I've followed the instructions for others who have had similar issues, but still have the issue. I've even allowed RarGenie to try and expand a folder, then used AppCleaner to remove all accompanying files, but I still have the issue.
    Is there anything else I can try?

    Thanks!
    That seems to have sorted it.
    I'd tried all the stuff on that page and run AdwareMedic before, but it didn't pick up anything.
    I ran it again this morning and it found 3 files which, once removed, stopped the annoying prompt.
    Your advice is much appreciated.

  • Instead of running firefox.exe, computer asks me to "choose the program you want to use to open this file".

    When I click on either the firefox shortcut or firefox.exe in the Mozilla folder, instead of running, the computer asks me to "Choose the program you want to use to open this file: firefox.exe". The recommended program is Adobe Reader 9.1, which obviously doesn't help.
    I have uninstalled firefox and downloaded it again, but now I am trying to run Firefox Setup 4.0.exe, and it asks me again to "Choose the program you want to use to open this file: firefox setup 4.0.exe" Help?

    This is a registry problem with your .exe entry
    The below program worked for me on my vista machine.
    http://windowsxp.mvps.org/exefile.htm
    You can download an exe file from there that automatically sorts the issue or you can edit the registry manually.

  • What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

    What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

    The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.

  • Which user account do you want to use to run this program?

    As of fairly recently, when I click to start Firefox, and just before it actually opens up, I get a the following screen:
    "Which user account do you want to use to run this program?"
    I have researched the internet and it seems as if many people have encountered this same problem.
    What's causing it, is it dangerous to my computer and how can I get rid of this message?

    This is a Windows feature that should only open if you right click on the Firefox icon and select ''Run As...".
    Try creating a new shortcut to Firefox.<br>
    You must make a shortcut to the <code>firefox.exe</code> in the Firefox installation directory.

Maybe you are looking for

  • Dual Stack NW 7.0 installation with R/3 Backend as UME

    I have a quick question guys. I am about to install a dual stack NW system with ADS(SQL server database on windows) and will use a R/3 Enterprise running on unix as the UME datasource. Now this R/3 enterprise backend already acts as bakend for Portal

  • Mac Pro will not boot, revs fans at full speed

    Hi, I had my Mac Pro (2006 3.0 quad core) asleep, it woke itself up and didn't display video, instead revved the fans at full speed and did nothing, so I shut it down using the power button. When I turned it on, it did/does the same thing, no chime,

  • Smartforms in Quality certificates

    Hi everybody Can anyone tell that how to use smrtforms in quality certificate? Regards Mohanraj.C

  • PDCE: Basic set up query.

    Good morning to all, I see that a data basis is needed at the first place. can you please list out the steps to be taken as prerequisites to PDCE. We are evaluating various scenarios in PDCE and would like to have a very basic level costing to be don

  • Could not load file or assembly 'Microsoft.Xrm.Client' in CRM outlook offline client.

    Hi, In my plugin code i have used 'Microsoft.Xrm.Client' to make use of CachedOrganizationService class. but while i am checking in offline client i am getting this error Could not load file or assembly 'Microsoft.Xrm.Client'. please suggest and help