ATTN: SSHR Rollup 3 for HRMS FP.K Rup 5671710
The SSHR Rollup 3 for HRMS FP.K Rup patch 5671710 has just been released today.
This patch contains fixes for the following bugs:
Bug 5612687 : ORACLE.APPS.FND.FRAMEWORK.OAEXCEPTION: FOR CHANGE MANAGER PROCESS.
Bug 5590776 : POSITION DEFAULTING AND POSITION LOV NOT WORKING IN RFC NOTIFICATIONS
Bug 5587674 : ONDEMAND:OHS: SEARCH IN SELFSERVICE HAS DUPLICATE VALUES FOR ASG
Bug 5582127 : ESC:PROPOSED_SALARY_N CONTAINS 38 DIGITS AFTER DECIMAL FROM SSHR.
Bug 5572041 : THIS PERSON IS NOT ELIGIBLE FOR THE ELEMENT ASSOCIATED WITH THIS ABSENCE TYPE.
Bug 5522407 : EMPLOYEE'S RECORD OR ELIGIBILITY CHANGED ERROR WHEN ADDING EMERGENCY CONTACT.
Bug 5515312 : SSHR SALARY CHANGES AUTOMATICALLY WHEN USING BACK BUTTONS.
Bug 5501388 : ONDEMAND:CANNOT ENTER REQUIRED FIELDS FOR JAPAN HIRE PROCESS.
Bug 5468591 : VOL TERM OF A MGR RESULTS IN INVALID ERROR MESSG -DUE TO SUB-ORD FUTURE ASSG CHG.
Bug 5527923 : GENERIC ADDRESS STYLE IS BEING REPLACED IN SELF SERVICE CONTACTS FORM.
Bug 5515814 : ONDEMAND:IN SSHR WHEN TERMING AND REHIRING AN EMP THE PARTY ID # IS NOT THE SAME.
Bug 5508360 : CHANGE JOB FUNCTION POSITION QUERY RETURN ONLY 'ACTIVE' STATUS POSITIONS.
Bug 5507401 : MANAGER SSHR HIRE APPLICANT GIVES NUMERIC OR VALUE ERROR WHEN ADDING SUPERVISOR.
Bug 5328872 : WRONG EVENT PASSED TO FINALIZETRANSACTION CALLBACK FOR DELETE ACTION ON SFL.
Bug 5138131 : DEFAULT VALUES IN EXTRA INFORMATION DFF IN SELF SERVICE NOT DISPLAYED
Bug 5652542 : THE EMPLOYEE'S RECORD OR ELIGIBILITY STATUS HAS CHANGED ERROR.
This patch requires additional prerequisite patches to have been successfully applied to your system before it can be applied. These prerequisite patches, as at the time that this patch was built, are listed below. Please check Oracle Metalink to determine if any of these have been superseded.
11i.HR_PF.K.delta.1 - 11I.HR_PF.K RUP 1
Regards,
Greg
We need to know the new codes which will be added and which if any will be replaced. We know those identified on the US Gov site but can Oracle Dev. provide the specifics in advance so we can update our Employment Applications etc to match Oracle HR definitions?
Regards,
Ed
Similar Messages
-
What could be the Approximate time for HRMS Implementation?
Dear Friends,
Any clue on What could be the Approximate time for HRMS Implementation?
Modules: Core HR, Payroll, SSHR & OLM
Bahrain Legislation
2 Functional
1 Technical Resource
Integration with Third Party system for Financials..
Anyy approximate time pls..
GuruHi Guru,
Difficult to estimate these as each legislation is different.
I also presume, Bahrain is not a seeded legislation.
So you will have to write all the tax rules and reports.
But, as the Tax/NI rules for GCC are fairly simple, should not be difficult.
Best way to go about it, is to do it in phases.
Core HR - BG configuration, Person migration, Absences etc.. and finally any reports for HR
Payroll - elements, balances, formulas and all the logic.. and then all the reports.
Once HR and payroll are done.. SSHR and OLM should take 1/3(or 1/2) of the time you spent on the HR/Payroll.
Cheers,
Vignesh -
I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
at System.Reflection.RuntimeModule.GetTypes()
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself. -
Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working
Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping. -
Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager
I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points -
Peoplesoft delivered processes for HRMS
I am new to Peoplesoft. I am dealing with NA-payroll, and collected a basic idea related to HRMS. But still haven't got an overall idea about Peoplesoft HRMS. Will anyone guide me in having a basic documentation for HRMS especially about delivered processes.
If you have access to the Oracle University training courses, they can be the best resourse for a beginner. Yoy can find lots of introductory courses for all the modules of PeopleSoft there.
In addition, keep reading PeopleBooks :)
All the best ! -
Hi, Want link for HRMS functional documents.
Hi There,
i'm new to HRMS.
can any one give me links for some simple documents
for HRMS functional.
Thanks
BachanSearch on metalink and OTN. There are also many old threads which discuss the same and have links. Search is your friend :)
--Shiv -
Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"
Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben -
Installing Update Rollup 4 for R2. Question of post installation task
I will be installing Update Rollup 4 for Service Manager 2012 R2 on our Orchestrator, Data Warehouse, Service Manager and Portal Server as well as updating the client Consoles.
Following MS article
http://support2.microsoft.com/kb/2989601/en-us?sd=rss#install.
A bit confused about the Post installation tasks. Particularly the following:
Resynchronize System Center Operations Manager mount point data
To resynchronize Operations Manager mount point data after you apply this update, follow these steps:
Disable all the Operations Manager configuration item (CI) connectors in the Service Manager console.
In Windows PowerShell, check the current execution policy by running the following cmdlet:
Get-ExecutionPolicy
If the current execution policy is Restricted, set it to
Remotesigned by running the following command:
Set-ExecutionPolicy –force RemoteSigned
Find the following PowerShell script in your System Center 2012 R2 installation directory:
OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
By default, you should find this file in the following location:
C:\Program Files\Microsoft System Center 2012 R2\Service Manager\PowerShell
Run the following command from the Primary Management server:
PowerShell .\OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
Revert the execution policy to the original value that it had in step 2.
Enable and synchronize the relevant Operations Manager CI connectors.
Make sure that all the mount point data is populated in Service Manager.
I am guessing they are talking about the System Center Configuration Manager Connector but not sure. We don't have a Connector for SCOM. If by OMCIConnector they mean SCOM, then I don't need to worry about this. If would be nice if they would tell
you why you are doing this. I don't even know what "Mount Point Data" is.
Does anyone know if it would cause any problems if I skipped this step? I hate doing stuff when I don't know why I am doing it. For example, step 8 "Make sure that all the mount point data is populated in Service Manager."
What does that even mean?
Also, I cannot even find the PowerShell script they are talking about in the C:\Program Files\Microsoft System Center 2012\Service Manager\Powershell folder so are they talking about SCOM or SCCM?All of the steps listed refer to the Operations Manager connections. none of these steps relate to the Config Manager connector. If you are not using SCOM, or don't have a SCOM connector, then you can safely ignore these steps.
-
I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer". -
Error 1603 when installing Rollup 4 for Exchange 2010 SP2
Hi There,
I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server.
I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
I have tried the following without success:
Turning off UAC
Running from elevated CMD prompt
Running from elevated Powershell command
Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
Re-downloading the RU4 install package to the local disk on the server
Adding more RAM and CPU resources
I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
but then all of a sudden just begins "Rolling back actions".
The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
to do so, could this have anything to do with it?
I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
I am running out of ideas so any help would be greatly appreciated.skippy-85,
Any updates on this Issues?
In case if the issue stands
resolved, Please mark Solution for this Thread and close this.
In case if you still have
the issue with the RU4 installation do let us know!
Thanks
Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!! -
Console freez after install Rollup 5 for DPM 2012 R2
Hello,
first domain admin installed Update Rollup 5 for DPM 2012 R2. The DPM console freeze in "Monitoring" area in second domain admin. In first domain admin DPM console works good. Do anybody know where si problem?
Thanks,
JakubHello Cejka,
The GUI might freeze in one of the the following cases :
Case1:
You have never protected the DPM server’s System State, with the DPM server itself
You have protected some System State from other Production Servers
You upgrade to UR5
You trigger an inquiry on the DPM Server itself
Case2:
You have a primary DPM server protecting the System State of a Production Server
You have attached the primary DPM server to a secondary DPM server for Disaster Recovery
You upgrade the secondary DPM server to UR5
You trigger an inquiry on the
primary DPM server in the secondary DPM server UI
Then:
The UI crashes, and gets hung if you start it again
Cmdlets are also unresponsive
Workaround:
Stop all DPM services (MSDPM, Access Manager, DPM Writer, DPMRA, VssNullProvider)
Open the SQL Server Management Studio (Either from Start Screen, or Run: ssms.exe)
Connect to the SQL Instance holding the DPM DB
Backup Your DPM Backup
Right click the DPM DB and click on “New Query”
Paste the following SQL script:
DELETE
FROM dbo.tbl_IM_ProtectedObject
WHERE
ProtectedObjectId IN
SELECT PO.ProtectedObjectId
FROM dbo.tbl_IM_ProtectedObject
AS PO
JOIN dbo.tbl_AM_Server
AS SRVR
ON PO.ServerId
= SRVR.ServerId
WHERE (CONVERT(VARCHAR(4096),PO.ComponentName)
= 'System State'
OR CONVERT(VARCHAR(4096),PO.ComponentName)
= 'Bare Metal Recovery')
AND PO.ProtectedInPlan
= 0
AND PO.ProtectedObjectId
NOT IN
(SELECT
ProtectedObjectId FROM
dbo.tbl_IM_ProtectedObjectAlerts)
AND LOWER(CONVERT(XML,PO.LogicalPath).value(
'(/child::ArrayOfInquiryPathEntryType/child::InquiryPathEntryType[attribute::Type="Server"]/attribute::Value)[1]',
'VARCHAR(4096)'
)) !=
LOWER(SRVR.ServerName)
Press F5 to execute
Start all DPM services
The UI and cmdlets should work normally as before
Islam Gomaa Microsoft MVP | System Center Data Protection Manager email: Islam @ Islam Gomaa.com Blog: http://owsug.ca/blogs/IslamGomaa Website: www.islamGomaa.com -
Interface tables for HRMS & Payroll
Dear All
Can you tell me that are their any interface tables available for HRMS and Payroll data loading like employee, addresses, assignments..
Regards
MajidIf you are using Data Pump :
HR_PUMP_BATCH_HEADERS
HR_PUMP_BATCH_LINES
For Initial Balance Upload :
PAY_BALANCE_BATCH_HEADERS
PAY_BALANCE_BATCH_LINES
For Batch Element Entry:
PAY_BATCH_HEADERS
PAY_BATCH_CONTROL_TOTALS
PAY_BATCH_LINES -
Update Rollup 2 for SCO 2012 R2
I have just installed SC2012R2 Orchestrator and then upgraded Rollup 2 through Windows Update. Do I need to run anything special after it on the database like it is required for VMM Update Rollup 2?
In the installation instructions there was one mention that if SMA is also in place then we need to change the database connection string, but since I do not have SMA at the moment, is it still applicable to me?Hi,
UR2 is the current update for System Center 2012 R2 Orchestrator (without SMA). You don't need to configure anything after the update.
http://www.sc-orchestrator.eu/index.php/scoblog/117-update-rollup-3-for-system-center-2012-r2-orchestrator-applies-to-orchestrator-or-not
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Link for HRMS 8.9 Peoplebooks
Hi All,
Does anyone have the link for HRMS 8.9 Peoplebooks.
Thanks,
Ravi Teja.You can find it all here...
[http://peoplebooks.cognizant.com/]
Maybe you are looking for
-
Hello all Im running Windows 8.1 Pro. It has Hyper-V on it, I use it and ive been able to install alot of os on it vista, xp, linux, etc. I got an educational copy of windows server 2008 r2 with cd key. From MS dream spark when i try to install it on
-
Just Got MiFi2200 and can't connect
I just got the ipad and mifi2200. the ipad sees it but will not connect?
-
Snow leopard to Lion Upgrade on a brand new Macbook Pro
My brand new macbook pro (bought september 2011) came with snow leopard installed. Am I really expected to buy a Lion upgrade for a brand new product?
-
Best way to export from FCP for website
I've been reading around about this and am not getting a clear idea of what to do... I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about). I want to export them in
-
App prototype--How to do on-click depression?
I'm using Keynote '09 version 5.3 on Mountain Lion 10.8.2 I have been trying to do a " button on-click highlight" for an app prototype. By "on-click" I mean when I click the button it's state changes from an inactive to a clicked/depressed state. Usi