Attr change run for huge PC!

Hi,
I have 30 infopackages which i had included in a new process chain and for all infoobjects i had created only one attr chnage run by including all the relevant info objects in the variant of aatr change run!
there are actauuly some parellel processes as well in the end of PC!
So how should i connect the attr change run process to the PC!
just connecting to any of the IP s is OK? or i need to connect every IP to the attr change run which are ending the chain?
Raj

You can design your PC.
If you are running change run after every load then you may run into change run locking issues...
You can do onething load all attributes .. run the change once then...
Load all hiers.. then run change run once...
then load text...

Similar Messages

  • Attr changes runs for  all Infoobject in a process chain

    Hi,
    I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
    How can I carry out the structural changes for all InfoObject in a process chain?
    Thanks!

    yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
    I don´t know what I do?
    This process actives all my ATTR and HIER in my chain???
    Message was edited by: Victoria León

  • Attr change run in Process chain!

    Hi,
    For uploading Master data, we do have different process chains ( Eight to Nine ) for each client and for each source system!
    Now the requireement is such that there must be only two Two process chains one for daily uploads and another for weekly uploads!
    i coule create a Meta chain which shall be calling all the daily upload Process chains in series!
    But what about the attribute change runs?
    i had actually included this Attr change run process for each client comibing the other process chains ( Attr, Texts and Hierarchy )
    Now since the modelling has been changed for the daily and weekly process chains, i am puzzled about the attribute change run processes!
    Because we have lot of infoobjects which are existing in both the clients
    Any ideas?
    Raj

    Hi Raj,
    You can solve your problem in 2 ways :
    1.Include Attr.change run in each of your local PC or,
    2.In your Meta chain ..arrange your Local Chains in parallel
    & have a single Attr.change process...here you can select your object type as Infoobject & include all your Infoobjects... one after another... for which you want to run the Attr.change.
    Regards,
    Chandan

  • Attr change run

    Hi guys;
    Is there a program to run the att change run. I have several att and hier loading via process chain and I want to execute the program if we have any to execute the attr change run at the end of the process chain. I came accross with RSDDS_AGGREGATES_MAINTAIN, is this the correct one?
    thank you.

    Hi,
    yes, its the right one.
    To avoid activating all pending infoobjects and rollup in aggregates, which can take hours if you have many and big aggregates, create a variant where you select the infoobjects and hierarchies from your process chains. You can trigger an event after successfull loading and laoding with failures. You can select this variant in the process step.
    Othwerwise you may risk that another load process may abort because the locks for master data cannot be set because of the change run.
    Kind regards,
    Juergen

  • Attr change run cannot preceed Data Load?

    Hi, all
    I need to make attr change run before loading data, because these active MD should be used in data loading routines. When checking this chain BW shows message " A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_E5NXARYHE6BXRST2FD3YZAN7B in the ch".
    Why? Is that because change run only activated and chain doesnt wait for change run end and starts next process?
    Or I can suppress this warning?

    <b>2 Gopikrishna eriki </b>
    Why? I think it isn't for no particular reason.
    <b>2AHP</b>
    <i>normaly attribute/hierarchy change run is performed after all data loading finished, it should put after the infopackage process.
    </i>
    But here I need to schedule another load after this change run. And I want to use results of this change run in this load.
    BTW, when running this chain I have dump on this infopackage load with OPEN_DATASET_NO_AUTHORITY on lines
      OPEN DATASET L_PFILENAME FOR INPUT IN TEXT MODE   
        ENCODING DEFAULT                                
        IGNORING CONVERSION ERRORS.                     
    When I schedule this package manually everyting is OK.

  • Attribute Change Run for Hierarchy

    Dear experts:
    we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
    My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
    Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
    Thank you very much
    Regards
    SzuFen

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • Attribute Change Run- For Custom InfoObject

    We have custom IO ZGN_PROD. For past few days attribute change run is not happening to this IO even though there are thousands of M version entries in P table. We have tried to use Report RSDDS_AGGREGATES_MAINTAIN for attribute change run but then also it is not going through. When we debug this report we found out that there is SQL statement in Report RSDDS_AGGREGATES_MAINTAIN which is not getting executed successfully.
    SQL Statement is
      UPDATE (<l_sx_itab>-name)
        SET  objvers = rs_c_ojbvers-active
             changed = rs_c_changed-nothing
        where objvers = rs_c_objvers-modified
          AND changed = rs_c_changed-insert.
    After execution of this SQL Sy-subrc is 4 instead of 0.
    What could be the reason.
    Can you please help me resolve this issue?
    Thanks and Regards,
    Samir

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • Job name of attr change run

    Hello friends ,
    could u please let me know , what is the name of job for Attr change run ?
    Regards,
    Manoj

    RSDDS_AGGREGATES_MAINTAN try in se38
    Khaja

  • Attr change run failed with exception

    hi all,
            My process chain failed at ACR( attr change run) with exception
    "UNCAUGHT EXCEPTION" ...I 've again scheduled that process but it again
    got failed.
      I am not able to undestand what is the problem?
      does anybody have any idea how to resolve this?

    hi arun,
                that was a short dump with the above exception .

  • Master data loads vs attr change runs

    Hi experts,
    I need to load master data daily and want to know the difference between attribute change runs and process chains for master data. Please explain with steps. I know how to create process chains.

    Attribute change run is nothing but adjusting the master data after its been loaded from time to time so that it can change or generate or adjust the sid's so that u may not have any problem when loading the trasaction data in to data targets.
    Whenever master data attributes or hierarchy is loaded an attribute chnage run need to be performd due to the following reasons:
    1. When a master data is changed/updated it gets loaded into the master data table as version "M"(modified). It is only after a attribute chnage run that the master data becomes activated i.e. version "A".
    2. Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.
    Re: Attribute Change Run
    Re: Attribute Change Run for Hierarchy

  • Change run for Compounding  infoobjects

    Hi Experts,
    I need a solution.My question is that do we have any option like attribute change run for compounded infoobjects.Ex.Componding change run??.
    Issue is that.I have Characteristic infoObject ZBOMM i.e for Bill of material.It has attributes and compounded infoobjects.The componded infoobjects are 0plant and 0material.We know these compounded objects acts as an primary key for ZBOMM infoobject.When the changes happen for attributes,because of attribute change run it over writes all attributes of ZBOMM which will be available for reporting.But when it comes to compounding infobjects (0plant and 0 material) it will retain the old data and also reflects the new changed data.this is shows double entry in reports.I want the old data not to be present as it happens for attributes.
    Is there any solution for this problem?.
    Please let me know.
    Thanks and Rgds
    ACE

    Hi!
    Run RSDDS_AGGREGATES_MAINTAIN for 0plant and 0material.
    Hope it helps!
    Adwin

  • Can we apply attribute change run for datatarget (Master data )

    hi,
    can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
    pls advice how not to make the error repeat even after successful loading of master data.
    Thanks in advance, quick responce is greatly appreciated.

    Hi all,
    i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
    coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
    i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

  • Double change runs for same variant

    Hi,
    Can anyone help me regarding this .We are facing duplicate change runs for the same variant.This is very important for us
    Regard
    Srini

    Hi Subhash,
    Check the print parametes of the job, can be seen under steps --> double click on program --> print properties. There we have option to select new spool number.
    So every time the job runs it will have a new spool number. Hope this helps.
    Regards
    Sushant

  • Error while realigning aggregates through master data attr. change run

    Hi all,
    We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
    "Error while procesing aggregate <aggregate technical name>"
    From ST22 we can find
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
    Whereas from SM21 we can find out:
    Database error 14400 at INS access to table /BIC/F200009.
    /BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
    Thnaks,
    Abhishek.

    Hi Jogeswara Rao Kavala,
    When I am pressing back or NO option  it is showing error like this
    What is this OK- Code means?
    how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
    Sunil Boya

  • Error in Change Run for 0cust_sales

    Hello Experts
    In master data load process chain for 0cust_sales it fails at change run step.
    with ABAP error short text "Exception condition "TREX_ACCESS_ERROR" raised."
    and error analysis
    " A RAISE statement in the program "CL_RSDDTREX_TABLSERVICE=======CP" raised the
      exception
    condition "TREX_ACCESS_ERROR".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls."
    Please help me understand and resolv issue here
    Thanks in advance.
    Regards
    Sudeep

    Hi,
    This seems to be related to BIA.
    Please check the below thread & link.
    [Attribute Change run was terminated;
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/6b/cda64246c6c96ae10000000a155106/content.htm]
    Regards
    Vishal

Maybe you are looking for