Attribute AgentUser not getting displayed

I m trying to configure OIPM
1. Access the Oracle I/PM domain in Oracle Enterprise Manager 11g FusionMiddleware Control at the following URL: http://localhost:7001/em
2. Log in as the Administration user (for example, weblogic).
3. In the navigation tree, expand Application Deployments, and then click the imaging application.
4. On the Application Deployment menu, select System MBean Browser.
5. On the System MBean Browser page, close the com.bea folder under Configuration MBeans.
6. Expand the oracle.imaging folder under Application Defined MBeans.
7. Expand the Server: <server_name> and config folders. The default server name is IPM_server1, but it can be changed when installing I/PM, so ensure you are
configuring the correct server.
8. Click config.
however I do not see the attribute : AgentUser... Is there any specific way in which this attribute is enabled.

There is no need for AgentInput user id as the system will use the logged on user id. The documentaton is incorrect.

Similar Messages

Navigation Attribute is not getting displayed as in Masterdata Table

Hi All,
I have an infoobject "YDOCUMENT" compoundedd with "S_ORD_ITEM". Also i have added few attribute (Reason for rejection and Order Status) for the same. This infoobject is getting updated through data load from Sales Order Item level DSO and it will contain the Reason for rejection and ORder Status for each Sales ORder and item combination.
After performing the data load i am able to see the attribute successfully getting updated into the master data table as expected, But when i run the Bex report and disply these Attributes as Nivugational Attributes, I am gettign the value as "Unassigned, and i am getting the proper result from the infoobject master data table.
Can anyone give me any idea why this is happening? How we can i fix this issue?
Thanks,
Muruganand.K

Hello All,
The issue is due to the SID generation failure for the Attribute, This didnt happen properly because i am inserting the records into the infoobject during the data load to another DSO.
Now i am doing a Direct data load to the infoobject to update the attribute this is solving the issue.
Regards,
Muruganand.K

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

Entitlements not getting displayed in Entitlements Tab - OIM11gR2

Hi Experts,
I am trying to provision entitlements to users by requesting entitlements. When i successfully provision entitlements, the entitlement is getting displayed in accounts tab, child form. But the same is not getting displayed in entitlements tab of the user.
Please kindly guide me
regards

Verify below steps:
1. Marking Entitlement Attributes on Child Process Forms
http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/appinstance.htm#CHDFFEEE
If you have already marked it then fine. else create new version of form and add property Entitlement=true. activate this . make sure the parent form having the latest child form. goto parentform->child tab and verify the child form version.if not create new version for the parent form and activate this version.Automatically it will pick the latest child form
2. Run Below scheduled task
a. Entitlement List scheduled task.
b. Entitlement Assignments scheduled task

SUN ONE Ldap - Default value is not getting displayed

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil Kumar

I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Attribute AgentUser not getting displayed

Similar Messages

Maybe you are looking for