Attribute can be a field for selection screen
Hi,
For 0employee i have made a attribute as organization unit in a report,so org unit is attribute for 0employee and now my requirement is that i want that organization unit to be in selection screen for Bex reporting so that the user can choose the org unit from the selection screen only.
Hi,
If you need to include organization unit, which is a attribute of 0employee, in you report, you need to perform the below steps.
1. In the 0EMPLOYEE characteristic Attribute tab, make organization unit as a Navigational attribute.
2. In the InfoProviders on which the query is created, you need to select organization unit as a navigational attribute.
3. If your report is created on a multiprovider, you need to select organization unit as a navigational attribute in Multiprovider also and create assignment for it.
ex: If your report is based on a multiprovider, which is created on a Cube and cube has a ODS below it, you need to perform above steps at all levels.
You will now be able to see the organization unit as a characteristic in report, just pull it and create a variable.
Please let me know if you need any more information.
Regards,
Pankaj
Similar Messages
-
Fields for Selection on selection screen - Data Dictionary
Hi,
I have an issue while selecting the required fields for selection on the Standard table.
VBAK --> Settings > Fields for Selection> Select required fields and save it as a variant.
It looks good for that day but it again changes to the standard selection fields on the selection screen.
Is there any way that i can keep the Fields for selection on the selection screen ?
Any suggestion will be appreciated!
Regards,
KittuHi Kittu,
The SE16 tool generates Selection Screens automatically for the Table and chosen fields therein the user selects. Unfortunately the tool is User Independent, thus other users can change the fields for selection thus rendering any Variants created useless. This is because of internal numbering identifiers for fields instead of field names making up the variant. SE16 has always being regarded as a development tool hence its limited functionality.
I however may suggest that you could utilise ABAP Queries instead by way of transaction SQ01/SQ02 or SQVi. These may offer you a better solution.
Best of luck,
Derrick Hurley
ABAP Development Workbench
SAP
Edited by: Derrick Hurley on Mar 31, 2011 4:01 PM
Edited by: Derrick Hurley on Mar 31, 2011 4:01 PM -
How to write HTML code in Web Template for selection screen
Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra. -
ABAP Query : Obligatory fields on selection screen!
Hi Experts,
I would like to know the differrent ways through which we can define mandatory fields on selection screen.Options availabel in Infosets (SQ02) as well as Query(SQ01).
Selection Screen:
Document Date in Document: (Mandatory Select-Option)
Plant : (Mandatory Select-Option)
Thanks,
YogeshHi, Everyone .
We can do that .
At selection-screen output (code section 13), set "1" to the field REQUIED by using MODIFY SCREEN code .
(You can get Dynpro number by F1 key or T-cd SE51 )
Masao .
Edited by: MASAO NONAKA on Oct 20, 2008 9:11 AM -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Multiple Selection For Selections screen field
Hi Friends ,
Can any body tell me how to create multiple selection for a field in selection screen and how to capture all those values of that fields in program for database selction. Suppose i am having document number EBELN from EKKO exists in selectio screen . how to create multiple selection for that and how to use all those values given to EBELN to get data from EKKO.
Kumar.hi,
select-options is one type of parameters where u can give multiple values in ranges or single as a input. when u use select-options then system will create a selection screen for u and u give multiple values as
ex:
select-options: s_ebeln for ekko-ebeln.
internally system creates a internal for s_ebeln which has for attributes
1. low --- starting value if range is used
2. high -
ending value
3. sign -
operator used for validating field
4. option -
to exclude given range of values or single value or to include.
for this u can assign default values in INITIALIZATION event as
INITIALIZATION.
s_ebeln -low = '1'.
s_ebeln- high = '100-100'.
s_ebeln-sign = 'BT'.
s_ebeln-option = 'I' // include
'E' // exclude.
if helpful reward some points.
with regards,
Suresh Aluri. -
How to hide input fields on selection screen using variant attribute
Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki KozaiUse this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin -
Default value for selection screen field
Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
RahulHi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya -
F4 for field at selection screen
Hi all.
I have a field at selection screen without any standard F4 on it.
SELECT-OPTIONS: S_EXCMSG FOR T458A-AUSKT. "Exception message
How can I implement F4 for this field?
Thanks,
RebekaHi,
Try using the FM " F4IF_INT_TABLE_VALUE_REQUEST "
A Sample Examle:
REPORT Z_TEST_F4_HELP.
TABLES: ZEMPLOYEE,MARA.
DATA: BEGIN OF ITAB OCCURS 0,
ENO LIKE ZEMPLOYEE-ENO,
ENAME LIKE ZEMPLOYEE-ENAME,
EAGE LIKE ZEMPLOYEE-EAGE,
SALARY LIKE ZEMPLOYEE-SALARY,
END OF ITAB.
PARAMETERS: P_ENO LIKE ZEMPLOYEE-ENO,
P_MATNR LIKE MARA-MATNR.
TYPES: BEGIN OF ts_mara,
matnr TYPE matnr,
ersda TYPE ersda,
ernam TYPE ernam,
END OF ts_mara.
DATA : lt_mara TYPE TABLE OF ts_mara.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR ERSDA ERNAM FROM MARA INTO TABLE LT_MARA UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MATNR'
PVALKEY = ' '
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = LT_MARA
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Ruthra -
Field Validation for Authorization Object field on selection screen
Hi Experts,
We have included a new field u2018Authorization Objectu2019 in the selection screen which should be reflected in the field Authorization Object of the spool property. Please let us know how we can provide F4 help for this field and also validate it in the code.
The data element "RSPOAUTH" is used for the field on selection screen parameter. However, as there is no value table attached to the domain, we are unable to provide any F4 help and hence cannot validate the field in the code.
Looking forward for your valuable reply.
Thanks in advance.
--Warm Regards,
Prajakta Kanitkar.Hi Prajakta,
You can refer the following code for getting F4 help.
TYPES: BEGIN OF stru_btc,
zesgbtc TYPE zhr_del_btc,
END OF stru_btc.
DATA: it_btc TYPE STANDARD TABLE OF stru_btc
SELECT-OPTIONS: s_zzbtc FOR pa0001-zzbtc NO INTERVALS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zzbtc-low.
SELECT * FROM zbtc INTO CORRESPONDING FIELDS OF TABLE it_btc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_ZZBTC'
value_org = 'S'
TABLES
value_tab = it_btc
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope this will help you.
Thanks & Regards.
Aniruddha -
How can i declare a single radio button field in selection-screen ?
How can i declare a single radio button field in selection-screen ?
>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas -
Restrict values for F4 on field in Selection-screen
Hi,
For f4 on particular field I am getting list of values. These values are fixed in Value Range of DOMAIN of that field. There are 26 values fixed for that DOMAIN. Now what I need is I need to restrict 26th value from displaying on F4 for that field in selection screen.
I tried doing it in AT SELECTION SCREEN OUTPUT event using F4_ON_VALUE REQUEST FM, fetching data and deleting 26th entry , but before i delete it, It shows all values in selection-screen.
Please any one guide me.
Thanks,
Vanitha PYou have to use AT SELECTION-SCREEN ON VALUE-REQUEST event.
Tables:mara.
TYPES :BEGIN OF gty_mtart,
mtart TYPE mara-mtart,
END OF gty_mtart.
DATA: gt_mtart TYPE STANDARD TABLE OF gty_mtart,
gtt_mtart TYPE gty_mtart.
DATA: gt_return_tab TYPE TABLE OF ddshretval,
gwa_return_tab TYPE ddshretval.
SELECT-OPTIONS:so_mtart FOR mara-mtart.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_mtart-low.
REFRESH gt_mtart.
gtt_mtart-mtart = 'Z01'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z02'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z03'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z04'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z05'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z06'.
APPEND gtt_mtart TO gt_mtart.
gtt_mtart-mtart = 'Z90'.
APPEND gtt_mtart TO gt_mtart.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'SO_MTART-LOW'
* PVALKEY = ' '
* DYNPPROG = ' '
* DYNPNR = ' '
* DYNPROFIELD = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_mtart
* FIELD_TAB =
return_tab = gt_return_tab
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc = 0 AND gt_return_tab IS NOT INITIAL.
CLEAR gwa_return_tab.
READ TABLE gt_return_tab INTO gwa_return_tab INDEX 1.
IF sy-subrc = 0 AND gwa_return_tab-fieldval IS NOT INITIAL.
so_mtart-low = gwa_return_tab-fieldval.
ENDIF.
ELSEIF sy-subrc <> 0.
REFRESH gt_return_tab. CLEAR: gwa_return_tab.
ENDIF. -
How to display the selection screen fields for selected checkboxes
Hi all,
I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
p_chk2 as checkbox user-command PQR,
p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
s_ersda for mara-ersda modif id A,
s_werks for marc-werks modif id B,
s_lvorm for marc-lvorm modif id B,
s_tab for dd03l-tabname modif id C.
data: v_chk1,
v_chk2,
v_chk3.
at selection-screen output.
loop at screen.
if screen-group1 = 'A' or
screen-group1 = 'B' or
screen-group1 = 'C'.
screen-input = 0.
modify screen.
endif.
endloop.
loop at screen.
if v_chk1 = 'X'.
if screen-group1 = 'A'.
screen-input = 1.
modify screen.
endif.
endif.
if v_chk2 = 'X'.
if screen-group1 = 'B'.
screen-input = 1.
modify screen.
endif.
endif.
if v_chk3 = 'X'.
if screen-group1 = 'C'.
screen-input = 1.
modify screen.
endif.
endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
if v_chk1 = ' '.
v_chk1 = 'X'.
else.
v_chk1 = ' '.
endif.
endif.
if sy-ucomm = 'PQR'.
if v_chk2 = ' '.
v_chk2 = 'X'.
else.
v_chk2 = ' '.
endif.
endif.
if sy-ucomm = 'XYZ'.
if v_chk3 = ' '.
v_chk3 = 'X'.
else.
v_chk3 = ' '.
endif.
endif.
Regards,
Sailaja. -
Search help for selection screen field
Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vindhi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
select single butxt into butxt
from t001
where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = 'T001'
fieldname = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
tables
return_tab = return
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
from t001
where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = dynfields
exceptions
others = 8.
start-of-selection.
rgsds
anver
if hlped mark points -
Validate a field on selection screen based on value entered on anothr field
HI,
There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
Could anyone suggest, how this can be achieved?
Thanks in advance.
Regards,
PavanHi,
You can use FM
DYNP_VALUES_READ
DYNP_VALUES_UPDATE
to read the another field value and Using that field build your internal table for f4 values.
and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>.
Maybe you are looking for
-
HELP! New Imac user (last 2 years)
I took my mac and had leopard and the new Ilife installed. Now it freezes almost every day. mostly when I run multiple programs, Itunes, Iphoto and safari at the same time. Sometimes like last night it froze when the screen saver came on and then aga
-
HELP New Install CS3.3 on a MAC
HI, I have a Mac freash out the box it has OX 10.5 and I tried to install CS3.3 upgrade on it but all it did was install fireworks and Pro 9. my question Do I have to have CS3 on my Mac first then use the up grade CD to upgrade should the up grade ha
-
How do you stop a recovery mode loop when it won't sync with the orignal itunes library?
My dad gave me his Ipod touch 4th generation and said if I could get it to work I can use it. I have tried to restore it with his itunes, it goes through the steps but when it is over it is still in recovery mode...I don't know what to do....
-
How do I sync the music from my iPhone to iTunes on my mac?
I got a new macbook and I can't sync the music from my iPhone to iTunes.. How do i do that?
-
Scratched Up Brand New iPod(less than 24 hrs) Under warrenty?
I have had my black 30G for 23.5 hours as of this post, I have moved after removing it from the box, once. I moved it in the apple issued case then in the breast pocket of my jacket, only other place its been is in my hand and my hands are not that d