Attribute change package (ACP)

Hi All,
Where we can find these attribute change package (ACP) in SMP.
Please guide me..
Thanks,
Mahesh.

Read SAP Note 1119856 - Description, tips and tricks for Attribute Change Packages
Regards
Juan

Similar Messages

Mopz - Requested Attribute Change Package 'TXGLO=====600' not deliverable.

HI ,
I am trying to generate the stack files in Solman using Mopz for upgrade from ERP 6 EHP 5 to EHP 7.
But in step Choose Add-on Products i get below error
Requested Attribute Change Package 'TXGLO=====600' not deliverable.
Message no.BORMMSGDELTACALC164
Any help would be really appreciated.
Thanks.

Hello,
so far, the reply I have received is that it should be possible to implement TXGLO 601 during this Support Package update.
I am not sure I agree with that take, I will discuss whether it is possible to release the ACP in some way. It does not look easy though.
Best regards,
Miguel Ariño

Requested Attribute Change Package 'EA-FINSERV617' not deliverable.

Hi experts,
while prepearing upgrade stack with MOPZ from ERP6.0 to EHP7 I have got this message.
there are only following results in swdc
Search Results
000001
EA-FINSERV600   Attribute Change Package 01 for EA-FINSERV 600
Support Package
000002
EA-FINSERV603   Attribute Change Package 05 for EA-FINSERV 603
Support Package
000003
EA-FINSERV604   Attribute Change Package 04 for EA-FINSERV 604
Support Package
000004
EA-FINSERV605   Attribute Change Package 01 for EA-FINSERV 605
Support Package
000005
EA-FINSERV606   Attribute Change Package 05 for EA-FINSERV 606
Support Package
Shall I wait for the file appearing for a while ?
Regards, Evgeny

Hello Guys,
Please take a look at below thread
Maintenance optimizer downloads error..
Best Regards,
Srikanth

Effect of Full Attribute Extract on Aggregate Attribute Change Run

Because we extract data that does not trigger the change pointer on 0CUST_SALES we do a FULL extract of this data daily instead of a DELTA. We recently created an aggregate which contains navigational attributes of 0CUST_SALES (namely Sales Office & Sales Group).
My question is does the system look to see if any information has changed between the new and old values or does it assume since there is a new version for every entry that 100% of the values have changed?
The reason I'm asking is BW appears to be rebuilding this aggregate from scratch each day instead of changing the aggregate for the few entries that actually changed.

I did a FULL extract for 0CUST_SALES in our QA system. It transferred 28617 records. When I look into the monitor > processing > data package 1 > update I see the following:
3 data records in table /BI0/XCUST_SALES marked for deletion
3 data records inserted in table /BI0/XCUST_SALES
3 data records n table /BI0/PCUST_SALES marked for deletion
3 data records inserted in table /BI0/PCUST_SALES
Different database operations were executed
When I run the attribute change I see the following messages:
The Change Run is executing
Attribute 0CUST_SALES__ZZROUTE for basic characteristic 0CUST_SALES: 2 changes
Attribute 0CUST_SALES__0BILLTOPRTY for basic characteristic 0CUST_SALES: 2 changes
Attribute 0CUST_SALES__0PAYER for basic characteristic 0CUST_SALES: 2 changes
Attribute 0CUST_SALES__ZZACGRP for basic characteristic 0CUST_SALES: 2 changes
0001 ZSD_C02    100016     Aggregates Will Be Adjusted by:Reconstruction
0002 ZSD_C02    100019     Aggregates Will Be Adjusted by:Reconstruction
After seeing this i revisited the documentation for threshold value in RSCUSTV8. Ours is BLANK! So according to the documents when it is blank the aggregate is reconstructed generally. Not what we want!!
I will change the setting to the suggested 20% to start and we'll work from there.
Thanks for your help Oliver.

How to trigger attribute change run manaully

Hi all,
i need to update a master data object with new data. i have the flat file. i scheduled info package and exected DTP (datasource -
>Master data object). now I need to trigger attibute change run manually. How would i do that?
Pls help
Please search the forum before posting a thread
Edited by: Pravender on Feb 4, 2012 11:16 AM

HI Ramya,
Activation master data is different than running Attribute change run.
Activate master data will only activate the master data in info object(Change the records in M version to A version.
Attribute Change Run will activate the master data in info object and updates the aggregates with new data if you have any aggregates built on this info object.
Be specific while asking the question.
Regards,
Venkatesh

Error in process chain with attribute change runs

We have one warning is coming in one process chain :A type "Attribute Change Run" process cannot precede process "Execute InfoPackage"
We checked the Process View , we found that there are number of attribute change run after each scheduling of Info package with different datasource but for same data target.
How to remove this warning .
Some onsite person has added this extra Attribute Change Run recently.

Hi Surendra,
If it is the same Info-object that is getting loaded through different Info-packages then have only 1 "Attribute Change Run" process at the end. You can ignore the warning.
Bye
Dinesh

Attribute change Run and Infocube Problem

Hi SAP BW Experts ,
I am getting the following problem
2 days back our production system was down when Attribute change run is running in a process chain . After the system is up I triggered the Attribute change run manually for that specific master data Object. But the jobs was cancled automatically. When I checked the Job log I found the following messages
InfoCube XXX is locked by a terminated change Run
System error: RSDU_TABLE_COPY_INI/DDIF_TABL_ACTIVATE /BIC/E200073 /BIC/E100073 0
Message no. DBMAN100
When I verified manage screen in the Infocube XXX , one request is not rolled up . when I tried to rollup that particular request manually again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to create Indexes on that Infocunbe XXX , Again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to load data in to that Infocube I am getting the same message InfoCube XXX is locked by a terminated change Run
The Steps Taken By Me:
1. In SM12 , there are no lock entries for the Infocube XXX
2. According to A.H.P reply I verified the Support package . We are having Import Support package 18 for 3.10( BW 3.10 patch 18 or SAPKW31018 )
so I think there is no problem from patch side.
So please let me know by doing which task , I can eliminate the error message InfoCube XXX is locked by a terminated change Run

I got this reference from one of other site. Hope this solves issues of most of our ques on this topic.
We faced this problem and reported to OSS. They solved our problem.Here is
the answer from OSS
I connected to your BWQ system. I checked the table RSDDAGGRMODSTATEand
found an entrie for a change run "not yet" finished.
CNSID CLOSEDFL TIMESTMP_START TIMESTMP_END TSTPNM
207,851,300 20,030,910,141,500 0 SIDTLHG
As you can see, the field CLOSEDFL is blank (should be 'X' for an ended
change run) and the field TIMESTMP_END is also zero.
You can also check with the function module RSDDS_CHANGERUN_MONITOR as
in note 388069 that both objects you reported are the ones involved
with thi change run error (Infocube ZINV and Infoobject ZELEM_PEP):
E_CR_STATE C
E_T_CHANM 1 Entry (IOBJNM = ZELEM_PEP)
E_T_HIEID 0 Entries
E_T_AGGRSTATE 1 Entry (AGGRID = 3QR79ZYB6VGSDS3C42HPXMA8S
ICUBE = ZINV)
E_T_MSG 1 Entry (IOBJNM = ZELEM_PEP)
You have two choices to solve this problem. You cn either:
1.- Restart the change run and let it finish with ok.
The change run usually fails due to database errors, tablespace
problems, and when some user manually cancel it (NEVER should be
done!!)
2.- Change manually the entry from table RSDDAGGRMODSTATE that isdescribed
above. Set the field CLOSEDFL with a 'X' and also fill the field
TIMESTMP_END with a value with the following format
yy,yym,mdd,hhm,mss. Use, for example, '20,030,910,181,500'
IMPORTANT!!!
After this change on table RSDDAGGRMODSTATE, you have todeactivate
all aggregates, activate again and refill them!!
Hope this solves your error. If the issue is solved, please close this
message with the [confirm] button.
Best regards,
David =C1lvarez
SAP Active Global Support
The answer refers to our problem.We chosed option 2. Here is the AbAPcode:
REPORT ZLOCKED .
tables: RSDDAGGRMODSTATE.
select * from RSDDAGGRMODSTATE where CLOSEDFL = ' '.
RSDDAGGRMODSTATE-CLOSEDFL = 'X'.
RSDDAGGRMODSTATE-TIMESTMP_END = 20020912195015.
MODIFY RSDDAGGRMODSTATE.
ENDSELECT.

Process chain error - Attribute change run

Hi,
I am creating a Process chain to load 4-5 master data with its text.
I get a error while executing :
it says : Attribut change run need to be set up.
what should i do
1 :where should i set it up and how ??
2 :why is that needed ??
I included it in the Process chain and still it says that i need to set it up in the administrative workbench .
Please help me understand .
Thanks,
GG

Hi , when i execute a Process chain it stops at the A Master data load package and i get that red.
if i double click it ,
It says that
Attributes are not yet maintained.
If i see the details,it says
Diagnosis
     The attributes have either not yet been created or activated.
     The data cannot be taken from the source system without maintained
     attributes. Therefore, this data request is not possible.
Procedure
     Maintain the attributes for this master data-InfoSource in the
     Administrator Workbench and then activate them.

"Attribute Change Run" process has to follow process "Execute InfoPack

Hi All,
i created process chain for M.D SD area. here i created start varient, then execute info package process created and when i am checking that it showing some warning message like ....
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4B9B5FH2BTQJOBTBAWHVM5ZY2 in the chain.
Here i can't understand what i have to do....
Any inputs for this...........
Thanx in Advance
Subbu.

hi,
Check master data objects in both process types "Excute info package" after start varianet and in attribut echange run process type.
Both should match or system will throw error message.
The concept is like Attribute change run has to run when ever new data is loaded to master data attributes.
Regards,
Arun Thangaraj

BPS and attributes change

Hi,
I'm currently working on BI-IP with planning function "Repost on Basis of Characteristic relationship" and it works well but i would like to know if there's something like this in BPS.
Some old projects are in BPS and there are some derivation by characteristic relationship. In BPS if an attribute changed from the last writing a new line is created with the new value but i don't think there's another line to cancelled the fisrt one (line with old attribute value).
I hope someone can find an issue for my question.
Raito.

After few test with BPS it doesn't work like BI-IP.
Let's take an example to be sure we speak about the same thing.
I've got a Web Interface for the input where we need to fill one Order Number with an Amount. On my Planning Area, there's a derivation by characteristic relationship for profit center (attribute of Order Number).
I fill my interface with Order Number A and an AMount of 10.
In my cube i have something like :
Order number = A / Profit Center = AA / AMount = 10
If my master data changed and my new profit center for Order number A is AB. If i changed my data in the input with the value 20, in my cube i've got something like :
Order number = A / Profit Center = AA / AMount = 10
Order number = A / Profit Center = AB / AMount = 10
For me it's not good because i need to have 20 in my profit center AB and 0 in AA like how it works with BI-IP and planning function "Repost with characteristic relationship". SO i need to have 3 lines in my cube
Order number = A / Profit Center = AA / AMount = 10
Order number = A / Profit Center = AA / AMount = -10
Order number = A / Profit Center = AB / AMount = 20
I hope it's clear ...

Attribute Change run taking too long time to complete.

Hi all,
Attribute change run has been taking too long time to complete.It has to realign 50 odd aggreagates, some by delta , some by reconstruction. But inspite of all the aggregates it used to finish in quick time earlier. But since last 4-5 days it is taking indefinite time to finish.
Can anyone please suggest what all reasons may be causing this? and what possibly can be the solution to the problem? It is becoming a big issue. So kindly help with ur advises.
Promise to reward your answer liberally.
Regards,
Pradyut.

Hi,
Check with your functional owners in R/3 if there are mass changes/realignments or classification changes are going on regarding master data. e.g. reasigning materials to other material groups. This causes a major realignment in BW for all the aggregates. Otherwise check for parameterchanges / patches or missing db stats with your sap basis team.
Kind regards, Patrick Rieken.

Assigning a value to a record attribute ,where attribute changes dynamicall

Hi all,
i am writing a procesure in which ...
i want to assign values to a record whose attributes changes dynamically depending on the variable value...
below is the code in which i am trying to assign values to a record type rec_ce_stmt_int_tmp & i want a value "/" to be assigned to rec_ce_stmt_int_tmp.column(l_num_curr_col_no + 1)[[/i]b] ...
for example if l_num_curr_col_no value is 14 then a value "/" must be assigned to rec_ce_stmt_int_tmp.column15....
i am highlightinf the row of code where i want to assign a vlue "/" to my record attribute.... & insert this assigned values in to my table.
FOR c_fnds_dtl_rec IN
c_fnds_dtl (c_stmt_acts_rec.intf_row_id)
LOOP
IF l_num_curr_col_no > 13
THEN
rec_ce_stmt_int_tmp.column(l_num_curr_col_no + 1) := '/'; BEGIN
INSERT INTO ce_stmt_int_tmp
(rec_no,
column1,
column2,
column3,
column4,
column5,
column6,
column7,
column8,
column9,
column10,
column11,
column12,
column13,
column14
VALUES (rec_ce_stmt_int_tmp.rec_no,
rec_ce_stmt_int_tmp.column1,
rec_ce_stmt_int_tmp.column2,
rec_ce_stmt_int_tmp.column3,
rec_ce_stmt_int_tmp.column4,
rec_ce_stmt_int_tmp.column5,
rec_ce_stmt_int_tmp.column6,
rec_ce_stmt_int_tmp.column7,
rec_ce_stmt_int_tmp.column8,
rec_ce_stmt_int_tmp.column9,
rec_ce_stmt_int_tmp.column10,
rec_ce_stmt_int_tmp.column11,
rec_ce_stmt_int_tmp.column12,
rec_ce_stmt_int_tmp.column13,
rec_ce_stmt_int_tmp.column14
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line
(fnd_file.LOG,
'Error while inserting 03/88 >13 record into ce_stmt_int_tmp :'
|| SQLERRM
RAISE end_acts_save;
END;

Hi Sathya,
Actually this is apart of my procedure, BEGIN is also there
it is giving an error saying COLUMN MUST BE DEFINED on line
rec_ce_stmt_int_tmp.column(l_num_curr_col_no + 1) := '/';
can you please help me out to achieve my task ...
thnks,
Sachin

ERROR while running attribute change run.

hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.

At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps.

Attribute change run problem - infoobject is not listed in the list

Hi folks,
When I load master data for 0customer, the infoobject 0customer doesnt come in the infoobject list for attribute change run. Also, when I try to activate master data manually it says 'Master Data already active'. and the reality is M version of Data is not active.
Can you guide me.

Try running the program RSDMD_CHECKPRG_ALL for this infoobject. You can select all the options when running this program.
Try running this program multiple times, coz my experience showed that initial run may not always fix this issue.
Good luck!

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Attribute change package (ACP)

Similar Messages

Maybe you are looking for