Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Similar Messages

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • Attribute change run Failing in Process Chain

    Hi guys,
    Every day my process chains is failing due to Attribute change run and I am maually running attribute change run.
    And one more thing when the attr. change run is triggered automatically,then it is generating 2 change counters in RSATTR tcode instead of 1.
    One is successfully completes and one is still in schedule.After 2days days it is showing like completed change count id.
    Please help me.
    Regards,
    Tiragati.

    Hi,
    As you said Attribute change run step is failing every day.
    can you post the error message. is it failing because of Lock issue or some other issue.
    Mostly attribute change runs fails with lock issues. if its the same problem in your case. make sure that no master data objects runs at the time attribute change run runs.
    Try to put some delay in the process of the Attribute change run so that it will not get failed.
    Check if its the same ACR scheduled or diff objects?
    Regards
    KP

  • ABAP Run time error when display the Customs Export declarations

    Hi,
    I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
    Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
    While debugging we found that Primary Key of the below structures are not the same
    lt_corpar                              type      /sapsll/corpar_t
    lt_corpar_ht       type      /sapsll/corpar_k02_ht
    Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
    Error message short details
    Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
         "/SAPSLL/CUHD_LOAD_SELECTION".
        The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
        In the source code you have the termination point in line 144
        of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
    We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
    Regards,
    Pradeep Maddi

    Hi,
    I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
    For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
    Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
    Proforma Invoice not transferred to GTS
    After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
    Error details
    Runtime Errors         ITAB_DUPLICATE_KEY
    ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
    Application Component  SLL-LEG
    You tried to insert an entry into table  "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
    Regards,
    Pradeep

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Attribute Change run failed due to the User Lock

    Hi Friends,
    attribute change run has failed due to the user lock.
    can any one tell me how to process and what is the main cause behind on this.
    thanks in advance

    if master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
    Usually u get error message like..user ALEREMOTE has locked the MD tables..
    Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
    if it still shows locked..try to see in rsmo if a MD load has got stuck..
    else..see in sm12 to find lock is on which tables..
    last resort..delete lock forcefully from sm12..
    first option is wait for some time and give a try again..
    cheers,
    Vishvesh

  • Attribute change Run Failed/Scheduled

    Hello All,
    For a process Chain Attribute Change Run has failed in BW 3.5,and I Repeated the Change Run in Chain only
    where Repeat option is ,now the problem is in RSA1 it is now that change run is scheduled
    and sm37 it is showing that Canceled.
    Now there is Other Process Chain in BI7.0  which picks data from  3.5
    Should I repeat the Master data Chain in BW 3.5 followed by in BI 7.0
    Or any other way is possible as in BI7 the chain has run successfully..
    Thanks,
    Kiran

    Hi Kiran.......
    BI 7.0 and BW 3.5............totally two seperate systems..............here BW 3.5 is just act as a source system of BI 7.0.............if change run fails in BW3.5...............it is not going to effect BI 7.0.............
    As ajeet already said............it will effect the SID s in 3.5.............because attribute change run activates the master data...........and SID get generated during the activation of master data.......
    Also it will effect the aggregates............because aggregates also get adjusted during change run.......if any of the aggregates contains the master data.........which are getting activated in the change run....
    Now u r saying........that in SM37 it is showing that the job got cancelled............So it will not locked the master data..............terminated change runs generally lock the master data............then we hav to repeat the chain run to release the lock.........and u hav already repeated the change run............so no issue........
    Hope this helps..........
    Regards,
    Debjani........

  • Run time error when loding the WEB clint

    Dear
    All
    I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
    New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
    I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
    that are 20.10.2008     
    1.09:26:15     gopinath     SAPUSER     800     C     SYNTAX_ERROR               CRM_MKTTG_PROC_TG_FEXP_BATCH     1
    2.18.10.2008     14:05:55     gopinath          000     C     DBIF_RSQL_INVALID_REQUEST               SAPMSYST     1
    and i check in event viewer also in that it is showing that.
    SAP-Basis System: Transaction Canceled 00                  671 ( SYNTAX_ERROR 20081020092615gopinath                        SAPUSER     8001        )
    with Regards,
    Prakesh.

    Hi
    I would suggest you to create a OSS request using service.sap.com and ask SAP to help on this
    Regards
    Madhan

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Error when Activating the data store object

    Hi All,
    I have to get the following below errors when i was activating the ods.
    Transfer structure prefix for source systemt T90CLNT is not defined
    Error when creating the export datasource and dependent objects
    could anyone help me on this issue.
    Regards,
    Naveen.
    Edited by: naveen naveen on Feb 2, 2009 6:35 AM

    Hi Naveen,
    Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
    and also Check the BW self System whether it is active or not. then try activating DSO
    hope this helps
    Regards,
    Daya Sagar
    Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

  • Error while deleting the data from DSO

    Hi Experts
    I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
    "    An entry was to be entered into the table                                                    
         "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have                               
        had a unique table key (UNIQUE KEY)).                                                        
        However, there already existed a line with an identical key.                                                                               
    The insert-operation could have ocurred as a result of an INSERT- or                         
        MOVE command, or in conjunction with a SELECT ... INTO.                                                                               
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several                     
         initial lines into a table with a unique key.     "
    I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
    Regards,
    Mahesh

    Hi......
    I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
    Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
    Check this.....
    u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
    u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
    u2022 Note 1037507 - System Termination when you delete from DataStore objects
    Regards,
    Debjani.....

  • How does attribute change run works for Aggregates and Master data?

    Hi
    Can anybody xplain how does the attribute change run works for Master data ?
    For e.g.
    There is 0spelling and it has master data
    On Day 1 there are 10 records
    day 2 it has 12 records
    so with attribute change run this 2 new records will get added....
    The values for this  12 records will added seperately in Data load
    Is this how it workss
    So how about Aggregates which has Master data.????

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • Error while deleting the Data Source

    Hi gurus,
    I am getting an error while deleting a Data Source - "Source system XXXXX  not found RSAR205".
    but that source system no more available.
    Is there any way to delete the Data Source.
    Thanks in advance.
    CK.

    Hi,
    That source system deleted.
    Using RSDS also same error.
    Thanks,
    CK
    Edited by: CK on Oct 3, 2008 11:37 AM

  • Error when reading the data of infoprovider

    Hello,
    I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
    Error reading the data of InfoProvider ZDPPTGR1
    Message no. DBMAN305
    Diagnosis
    Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
    It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
    Procedure
    Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
    If an SQL error is listed in the previous message, see the procedure for SQL errors.
    Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
    Thanks for answering!
    Kind regards
    Heinz

    Hi,
    Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
    Remote cube - uncaught exception
    DBMAN350 Error reading MultiCube data over aggregate
    Error reading the data of InfoProvider 0TCT_VC01
    Regards,
    Arpit

  • I am getting a Changing Password Failed error when I try to join an active directory

    I had a working AD configuration under Snow Leopard. When I upgraded to Mountain Lion, my account was no longer in sync with the domain. I got the red dot on the login screen and my domain password was out of sync. I unhooked from the domain at that point. This was several months ago.
    However, over the last few weeks, I keep finding myself locked out of the domain. I suspect it's something on my Mac that is trying to use my old credentials. I was hoping to rejoin the domain and see if I could get my account back in sync. When I get a domain admin to enter his password on the Directory Utility join screen, it first notes that the computer account already exists in the domain. I tell it to continue, but I can't get past this point:
    2013-06-24 14:21:20.729935 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write
    2013-06-24 14:21:20.732774 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - existing record found 'CN=MYMACHINE,OU=Default,OU=Workstations,OU=MyCity,OU=North America,DC=GLOBAL,DC=OURCORP,DC=NET'
    2013-06-24 14:21:20.732822 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7faef36ed770'
    2013-06-24 14:21:20.733141 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm GLOBAL.OURCORP.NET flags 2
    2013-06-24 14:21:20.734196 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
    2013-06-24 14:21:20.734221 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kerberos (1.2.3.4)
    2013-06-24 14:21:20.741380 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kerberos (1.2.3.4)
    2013-06-24 14:21:20.741416 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
    2013-06-24 14:21:20.741619 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password
    2013-06-24 14:21:20.741637 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password using: MS set password in realm GLOBAL.OURCORP.NET
    2013-06-24 14:21:20.741648 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - using TCP since the ticket is large: 1560
    2013-06-24 14:21:20.741665 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service change_password for realm GLOBAL.OURCORP.NET flags 2
    2013-06-24 14:21:20.742867 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
    2013-06-24 14:21:20.742908 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kpasswd (1.2.3.4)
    2013-06-24 14:21:20.745231 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kpasswd (1.2.3.4)
    2013-06-24 14:21:20.745250 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
    2013-06-24 14:21:20.745398 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - set password using MS set password returned: 0 result_code 3
    2013-06-24 14:21:20.745417 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Changing password failed for '[email protected]' with error '' (3)
    2013-06-24 14:21:20.745426 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - setting Computer Password FAILED for existing record - 5103
    2013-06-24 14:21:20.745818 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - ODNodeCustomCall failed with error 'Credential operation failed' (5103)

    Reggierror,
    Had the same issue and discovered that I made my AD object name too long (16 instead of 15 character which is the limit) You might want to try making the computer object name shorter if you can.

Maybe you are looking for