Attribute Change Run in BW 3.5

Hi,
In RSA1 ->Monitoring ->Reallignment Run,
When I click on the InfoObject List button, I can see one InfoObject.
1) Does it mean the attribute Change Run is not yet perform for this InfoObject?
2) If yes, then I would just need to select this InfoObject, then click one the Execute button, correct?
3) If not, then why I have that InfoObject in the InfoObject List button?
Please advise, thank you.

Hi,
For your last quesdtion, why the infoobject is there in the list is it could be that the master data was changed/new records in to BW for this infoobject, hence requires the change run to be executed.
Regards.
Srini

Similar Messages

  • Attribute Change run taking too long time to complete.

    Hi all,
    Attribute change run has been taking too long time to complete.It has to realign 50 odd aggreagates, some by delta , some by reconstruction. But inspite of all the aggregates it used to finish in quick time earlier. But since last 4-5 days it is taking indefinite time to finish.
    Can anyone please suggest what all reasons may be causing this? and what possibly can be the solution to the problem? It is becoming a big issue. So kindly help with ur advises.
    Promise to reward your answer liberally.
    Regards,
    Pradyut.

    Hi,
    Check with your functional owners in R/3 if there are mass changes/realignments or classification changes are going on regarding master data. e.g. reasigning materials to other material groups. This causes a major realignment in BW for all the aggregates. Otherwise check for parameterchanges / patches or missing db stats with your sap basis team.
    Kind regards, Patrick Rieken.

  • ERROR while running attribute change run.

    hi sap xperts,
    I got an error while running the attribute change run in a process chain.
    At first i got an error "The action is locked by a change run"
    SO I DID THE FOLLOWING STEPS.
    1.RUN ATTRIB CHANGE RUN MANUALLY  IT RUN SUCCESSFULLY,but the process chain is still red.
    Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
    2.SM12 - realease the locks and right click the pc and repeat.It didn't work
    Q1.While removing the locks what should we remove,bcoz i removed all the locks?
    3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
    So the Process chain got stuck,Can any body help me to run the attrib chnage run.
    If possible can anybody send the Process chain monitoring documents to my email id:
      <email ID removed>
    please.thanks in advance,i know how to say thanks in sdn.

    At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
    Open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps.

  • Attribute change run problem - infoobject is not listed in the list

    Hi folks,
    When I load master data for 0customer, the infoobject 0customer doesnt come in the infoobject list for attribute change run. Also, when I try to activate master data manually it says 'Master Data already active'. and the reality is M version of Data is not active.
    Can you guide me.

    Try running the program RSDMD_CHECKPRG_ALL for this infoobject. You can select all the options when running this program.
    Try running this program multiple times, coz my experience showed that initial run may not always fix this issue.
    Good luck!

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • ABAP program to add in the process chain before the attribute change run

    Hi
    I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
    Regards,
    Satish

    I am not sure of any standard program .... but you can write your own... should be a small one..
    you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

  • Issue: attributes change run triggers the rebuilt of 0IC_C03 aggregates

    Hello Guru,
    I am facing to a problem that I don't understand.
    Here is below the detail of the messages of a '3-infoobjects attributes change run' step of a Master Data process chain.
    22:06:14     Job started
    22:06:14     Step 001 started (program RSPROCESS, variant &0000000231235, user ID RFC_BW)
    22:06:16     Starting process type ATTRIBCHAN with 3 objects...
    22:06:16     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061600
    22:06:16     Editing of aggregate 100139; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:16/07.07.2010
    22:06:18     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061601
    22:06:18     Editing of aggregate 100143; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:18/07.07.2010
    23:02:29     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 23022900
    23:02:29     Editing of aggregate 100140; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 23:02:29/07.07.2010
    23:52:38     Starting process type MDHIERACT with 2 objects...
    23:52:39     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523900
    23:52:39     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523901
    23:53:10     Aggregate 100139: Repair indexes
    23:57:14     Aggregate 100140: Repair indexes
    00:17:23     Aggregate 100143: Repair indexes
    00:50:09     3 aggregates are condensed
    00:50:09     Starting process type CONDAGGR with 3 objects...
    00:50:10     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501000
    00:50:10     Editing of aggregate 100143; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
    00:50:10     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501001
    00:50:10     Editing of aggregate 100140; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
    00:50:16     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501600
    00:50:16     Editing of aggregate 100139; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:16/08.07.2010
    00:50:22     Hierarchy/attribute change successfully carried out
    00:50:23     Event RSPROCESS with parameter D59BE8XWZMHY0IFP2VLEFP671 successfully triggered
    00:50:23     Job finished
    As you can observe, the step takes almost 3 hours !!!!!!! After anlyses BICHNG_* concerns
    22:06:16 Job started
    22:06:16 Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000000891873, user ID RFC_BW)
    22:06:18 Aggregate 100139( 0IC_C03) is being adapted / rebuilt
    22:06:18 Statistic UID of the aggregate process: 'D8FC4Q9KSAMRDWQ1RDPPKMF3O' (RSDDSTATAGGR)
    22:06:27 Aggregate 100139: Read (1) from table /BI0/E0ICC03_ (max 500000 records)22:06:27 SQL: 07.07.2010 22:06:27 RFC_BW
    I don't understand what is the link between the '3-infoobjects attributes change run' (BBATCH, 0MAT_SALES, 0MAT_PLANT) and the rebuilt of 3 0IC_C03 (Material Stocks/Movements) aggregates (why does the 'attribute chan run' trigger the rebuit of aggregates???).
    The rebuilt of the 3 aggregates takes 1 416, 3 366, 3 009 secondes...
    Does anyone understand my problematic? If not I can give you more details.
    Thanks in advance for your help.
    Samuel

    1/ Exactly Fred
    Here is the definitions of the aggregate:
    100139:
    0PLANT
    0STOR_LOC
    0MAT_PLANT__0VAL_CLASS
    0STOCKCAT
    0STOCKTYPE
    BMODIFIC
    BMVTSTOCK
    0MATL_TYPE
    0CALxxx
    2/ For my information in the aggregate 100140 , does the presence of BBATCH (one of the 3 IO) trigger the rebuilt or is it only 0MAT_PLANT__0VAL_CLASS ?
    100140:
    0PLANT
    0STOR_LOC
    0MATERIAL
    0MAT_PLANT__0VAL_CLASS
    BBATCH
    0STOCKCAT
    0STOCKTYPE
    BMODIFIC
    BMVTSTOCK
    0MATL_TYPE
    0CALxxx
    3/ In the same process chain, I have another Attributes Change Run: 0MATERIAL. Several active aggregates using 0MATERIAL__0MATL_TYPE are built on a CO-PA cube.
    Why did the '0MATERIAL Attributes Change Run' rebuild no aggregate? (see below)
    22:06:04     Job started
    22:06:04     Step 001 started (program RSPROCESS, variant &0000000231238, user ID RFC_BW)
    22:06:06     Activation of master data for 0MATERIAL
    22:06:07     154 Data records deleted
    22:06:11     154 Data records deleted
    22:06:12     154 Data records updated
    22:06:13     154 Data records updated
    22:06:13     0 aggregates are condensed
    22:06:14     Hierarchy/attribute change successfully carried out
    22:06:14     Event RSPROCESS with parameter D59BEEE069HKRCRU0ZPYFUPB1 successfully triggered
    22:06:14     Job finished
    Samuel

  • Regarding attribute change runs in process chains

    Hi All,
    While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
    regards
    satish

    Hi Bhagyarekha,
    The reason behind that error could be:
    An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
    Check this SAP Note:
    Note 684405 - Replacing the compounding and deleting navigation attr.
    Hope it helps.
    Veerendra.

  • Attribute Change Run taking very Long time.

    Hi Experts:
    We are daily loading Master data from one common process chain. There are 33 Infoobjects which are getting activated in Attribute Change Run Process. This process is taking almost 3 hours to run daily; due to this it is impacting our other data load process chains.
    Many times it happens that there is lock on cubes due to attribute change as attributes are getting aligned to same cube on which the roll up is running.
    There are local chains below the attribute change run, which are also important to run.
    Please help and suggest the workaround for the same.
    Cheers,
    Omkar

    33 info objects in one ACR(attribute change run) is not a good idea.
    Better to split the info objects and use multiple ACR.
    During your ACR if transaction data load was on then lock issues always occurs.
    Thats why we need to run master data loads first and later transaction data loads.
    Which info object change run was troubling, better to note the info objects which are causing and try to put them  in separate ACR and trigger it before start of your transaction data loads. so that it won't raise the same issue again.

  • Attribute Change Run in Process Chain failed with SQL 942 error

    Hi,
    Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
    Any pointers would be of great help!!
    Thanks in advance,
    Bhagyarekha.

    Hi Bhagyarekha,
    The reason behind that error could be:
    An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
    Check this SAP Note:
    Note 684405 - Replacing the compounding and deleting navigation attr.
    Hope it helps.
    Veerendra.

  • Use of Process type Attribute Change Run and Rollup in Process Chaning

    Hi SAP Gurus,
    I have a doubt about the use of process types Attribute Change Run and Roll up in PC
    If any1 can clear my doubts it would be helpful
    if possible if any1 can tell me about the list of process types available in Process Chains it would be helpful
    Thanks in advance

    Change run process is used to re-activate the Attributes after changes
    Roll up process is used to refresh a target (example : aggregates) after new data are uploaded into a Cube

  • Process chain best practice - attribute change runs

    When building attribute change runs into Process Chains I see that there are potentially two main options to consider:
    1. One to One mapping.  Incorporate a separate attribute change run object type after each InfoObject has been loaded.
    2. Many to One mapping.  Build the process chain so that one single attribute change run occurs after all the InfoObjects have been loaded. 
    I would be interested to see how other people have incorporated their attribute loading into Process Chains.
    any info appreciated.
    Mike

    We run the attribute change run twice in our daily process chain, here's our order:
    - Load all master data
    - Attrib change run
    - Load all tx data
    - Run ABAP programs that generate master data
    - Attrib change run
    I doubt there will be much of a performance difference if you do the change run after each master data load, but it makes the process chain a lot easier to read.

  • Attribute change run

    Hi all,
    As Iu2019m very new to SAP BW, can u plz tell me how to complete the attribute change run that has failed in a process chain?

    Hi
    Goto T-code: SE38, Run program: RSDDS_CHANGERUN_MONITOR.
    It will show the staus of change runs. Here you will get execute button option to execute it again.
    Note: It might take bit long time to open.
    Thanks,
    Jitender.
    Edited by: Jitenderkumar Danduvia on Mar 30, 2010 11:00 AM

  • RSA1 Setup and Hierarchy / Attributes Change Run Activation

    I have perfomed a Hierarchy / Attributes change run in RSA1, but althought it shows no errors; in some transactions (reports) its not updated or rather it still shows the previous and the actual hierarchy values overlapped.
    One of the possible solutions its to deactivate and reactivate aggregates, I already entered 0 in transaction RSCUSTV8, also try to find info objects and click  on activate master data but none has the option and they are not assigned.
    I been reading some solutions that involve making changes to the data that shows in different parts of transaction RSA1, the problem is that in my case there are no data in the transaction just shows some unassigned info objects.
    In fact SAP ask me to provide a System Logical Name prior to use transaction RSA1. So problably there are more set up steps missing.
    Does somebody knows where should I look for answers.
    Thanks
    Best Regards,
    Carlos

    Its more complicated than I thought currently learning more about BW

  • How to trigger attribute change run manaully

    Hi all,
    i need to update a master data object with new data. i have the flat file. i scheduled info package and exected DTP (datasource -
    >Master data object). now I need to trigger attibute change run manually. How would i do that?
    Pls help
    Please search the forum before posting a thread
    Edited by: Pravender on Feb 4, 2012 11:16 AM

    HI Ramya,
    Activation master data is different than running Attribute change run.
    Activate master data will only activate the master data in info object(Change the records in M version to A version.
    Attribute Change Run will activate the master data in info object and updates the aggregates with new data if you have any aggregates built on this info object.
    Be specific while asking the question.
    Regards,
    Venkatesh

Maybe you are looking for