Attribute Change Run in Process Chain failed with SQL 942 error

Hi,
Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
Any pointers would be of great help!!
Thanks in advance,
Bhagyarekha.

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Similar Messages

What is Attribute change run in process chain

Hi Everyone,
Can anyone please give some information regarding "Attribute Change Run" in process chain. And how it is useful ?

Hi Aditya,
You need to schedule an attribute change run when you change master data attributes or hierarchies that are used as navigational attributes or in aggregates. There is a simple test to check if you need an aggregate change run. Load your attributes and look into the master data table (directly via SE16). If you only have entries with OBJVERS = 'A' (active) then you don't need a change run. If you have entries with OBJVERS = 'I' then you need to schedule a change run after upload.
Look at these previous threads
Re: When to use Attribute change Run
Re: Attribute Change Run
Regards,
R.Ravi

Problem in Activating Hierarchy Attribute change run through process chain.

Hi All,
I have the problem in Hierarchy change run processw running through process chain..and also process chain completes successfully without any error..
Even hierarchy change run completes successfully the hierarchy objects are not activating,
so daily when i have to activate hierarchy objects manually..
and what i did was in one attributechange run process i have included 10 hierarchy object is it correct or else i have to separatly create 10 attribute change hierachy proceess in the process chain.. pls through some lights on this issue
With regards,
Hari

Hi venkat,
Yes.. i already include the save hierarchies process in process chain...
my main problem is hierarchy infobject are not activating using process chain and also even process chain is not giving error message.. and in which log table the hierarchy objects are maintained (such as run time, date , status etc..).
IS there is any other settings to be made in process chain..
with regards,
hari

Attribute Change Run in Process Chain Texts?

Dear Colleagues!
A simlple question: Do you have an Attributes change run in the end of a Process Chain only containing text? (Master Data text) Or i s it sufficient to have it after attributes?
Regards
Silje

Hi,
Attribute chage run is meant only for Attr/Hierarchies.
No need to include it for texts.
For the texts changes were automatically reflected with out change run.
Regards
Jonn

Regarding attribute change runs in process chains

Hi All,
While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
regards
satish

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Attribute Change Run in Process Chain

I'm making a process chain purely for attributes. Every time I add an infopackage for attributes I get prompted to make an attribute change run. Do I need an attribute change after every attribute infopackage or can I just have one at the end?

Hi,
You can have one attribute change run at the end of the process chain for all the attribute loads.
Cheers,
Malli.

How to run change run in process chain when it fails

HI All,
How to run attribute change run in process chain when it fails. Give me the procedure with clear description. Is there is any difference with 3.x versions in running this.
Thanks,
Pratap Reddy

Hi Pratap.
If BI Accelerator is not being implemented by ur company, in that case if change run fails u'll proceed by 'Repeat' process option as usual we do in 3.x.
If BIA is exists, in this scenario u can not repeat as we do in 3.x. U have to drop the indexes on cubes effecting that change run and run the change runs. Once it is finished recreate BIA Indexes on cubes.
Warm Regards,
Ramki

Attribute Change Run in Procee chain.

I am trying to create a process chain for loading employee master data. I have three datasources populating this data.
So in the process chain I have to add the Change Run process type only after loading data from all datasources right ?
what is the process type 'Attribute Change Run' useful for anyway ?

You are correct. If the loads to the employee Master Data Attributes are done serially, then you can end it with the 'Attribute Change Run' variant. If the loads to the employee Master Data Attributes are done in parallel, then you can have all three InfoPackages flow into an 'AND' variant and then have the 'Attribute Change Run' variant.
The 'Attribute Change Run' in effect activates the Master Data Attributes, much like the activation process of activation of a DSO. The way it does it technically behind the scenes, however, is different.

Change Run in Process Chains

I am running process chains early morning. I one process chain I am carry out an attribute change run on 0MAT_PLANT and on the other on different InfoObjects. Can these run at the same time or if they do can they cause a lock? Thanks

Funny... My reply would have been "no", as in our system parallel activation always creates lock situations. We do all our attribute change runs in serial.
Check out note 903886:
<i>(2)You cannot execute several change runs in parallel (do not confuse this with the 'parallel processing' described in Note 534630). For more information, see Note 825927.</i>
Eduard

Attr change run in Process chain!

Hi,
For uploading Master data, we do have different process chains ( Eight to Nine ) for each client and for each source system!
Now the requireement is such that there must be only two Two process chains one for daily uploads and another for weekly uploads!
i coule create a Meta chain which shall be calling all the daily upload Process chains in series!
But what about the attribute change runs?
i had actually included this Attr change run process for each client comibing the other process chains ( Attr, Texts and Hierarchy )
Now since the modelling has been changed for the daily and weekly process chains, i am puzzled about the attribute change run processes!
Because we have lot of infoobjects which are existing in both the clients
Any ideas?
Raj

Hi Raj,
You can solve your problem in 2 ways :
1.Include Attr.change run in each of your local PC or,
2.In your Meta chain ..arrange your Local Chains in parallel
& have a single Attr.change process...here you can select your object type as Infoobject & include all your Infoobjects... one after another... for which you want to run the Attr.change.
Regards,
Chandan

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Process chain failed with RSDMD199

Hi All,
While loading data through process chain, which includes master data and transactional data,
the job failed.
and the message is : RSDMD199
also when i checked in details tab in RSMO, i got meaasage like:
3510 data records in table /BIC/PZORD_NUM marked for deletion
also this job runs with 3 data packages, out of which 1st data package failed while updating in target.
But completed data package also has the same message like
3510 data records in table /BIC/PZORD_NUM marked for deletion
So can anybody explain me which type of error this is.......???
Thanks in advance,
Vishal

hi,
see Note 788588 which addresses the RSDMD199 error.
So shortly summarizing the problem of RSDMD 199.This error occurs due
to following reasons:
1. Master Data tables or indexes are inconsistent at the database level.
2. Master Data is inconsistent for the characteristic (RSRV check)
3. Same characteristic value spread across different datapackages and
they are loaded in parallel.
4. Parallel loading of time-dependent attributes or texts.
5. Delta update of an ODS object into a characteristic
6. Simultaneous data load into the following objects :
    a. Navigational Attributes of the characteristic
    b. Compounding Objects of the characteristic.
    c. Characteristics that are references of this one.
    d. Trasaction Data - Into Info Cubes that contain this
       characteristics
    e. ODS request activations - When the chacteristic is part of the
    ODS object.
Some of the above points are described in detail in the note 668466.
Colin

Process chain failing with error 8 in BI 7.0

Hi ,
we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

Hi,
user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
bye
Frank

Process chain best practice - attribute change runs

When building attribute change runs into Process Chains I see that there are potentially two main options to consider:
1. One to One mapping. Incorporate a separate attribute change run object type after each InfoObject has been loaded.
2. Many to One mapping. Build the process chain so that one single attribute change run occurs after all the InfoObjects have been loaded.
I would be interested to see how other people have incorporated their attribute loading into Process Chains.
any info appreciated.
Mike

We run the attribute change run twice in our daily process chain, here's our order:
- Load all master data
- Attrib change run
- Load all tx data
- Run ABAP programs that generate master data
- Attrib change run
I doubt there will be much of a performance difference if you do the change run after each master data load, but it makes the process chain a lot easier to read.

Process Chain Failed Error

Hi All,
Following is the error in process chain, please let me know the approch to resolve the issue
Source system: CRM
Batch job cancelled with following error
Job cancelled after system exception ERROR_MESSAGE
The following is the error in process chain
Process Attribute Change Run, variant has status Ended with errors (instance STRU_E0F3RXKBGPIRKR9NQCU2J7HLQ)
The action is locked by a change run.
Regards
Kareena

Hi,
Usually a BI_STRU job runs in either of the two case mentioned below:
1> Either you are manally pushing packets of a failed load may be because of lock or sid.
2> When you manually run a ACR by selecting specific info objects in rsattr transaction.
Now failing of a STRU job means the object is either locked that could be tracked in SM12( if you know the corresponding job for which the job was running).
Usually an ACR if fails in between locks all the acquired objects , the failure could be checked either in sm37 with job name prefix BI_ATTR, or in RSATTR and detail in SLG1, it could be traced in se38 too using program RSDDS_Changerun_monitor in BI 7.0 and even could be restarted from there.
For getting more information on which all objects are locked by the ACR you can use funtion module in rsdds_aggr_mod_state_get in transaction se37 too.
Hope this will be expedite.
Thax & Regards
Vaibhave Sharma.
Edited by: Vaibhave Sharma on Aug 31, 2008 9:28 PM

Attribute Change Run in Process Chain failed with SQL 942 error

Similar Messages

Maybe you are looking for