Attribute Change Run" process cannot precede process "Execute InfoPackage

hi all,
i have changed process chain, after changing the chain i have click the check button and activated. then iam getting this error
A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_C0BVLUDKPEPXGXFMHQ67RFI9L in the chain.
please help me out
thanks advance
sudheer.

Hi,
Your process chain shud have the following sequence:
Start Process> Loading of master data> AND process (if u have multiple master loads)-->Attribute Change Run
And all the linkages between the processes shud only be "SUCCESSFUL". Create new variants for all processes you enter in your process chain.
Check you chain before you activate. If it gives you exlamatory sign, the also u can go ahead with activation as it is giving u just the warnings.....
Hope it'll help u.......
Preet

Similar Messages

  • Use of Process type Attribute Change Run and Rollup in Process Chaning

    Hi SAP Gurus,
    I have a doubt about the use of process types Attribute Change Run and Roll up in PC
    If any1 can clear my doubts it would be helpful
    if possible if any1 can tell me about the list of process types available in Process Chains it would be helpful
    Thanks in advance

    Change run process is used to re-activate the Attributes after changes
    Roll up process is used to refresh a target (example : aggregates) after new data are uploaded into a Cube

  • Attribute Change Run for Hierarchy

    Dear experts:
    we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
    My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
    Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
    Thank you very much
    Regards
    SzuFen

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • Error in process chain with attribute change runs

    We have one warning is coming in one process chain :A type "Attribute Change Run" process cannot precede process "Execute InfoPackage"
    We checked the Process View , we found that there are number of attribute change run after each scheduling of Info package with different datasource but for same data target.
    How to remove this warning .
    Some onsite person has added this extra Attribute Change Run recently.

    Hi Surendra,
    If it is the same Info-object that is getting loaded through different Info-packages then have only 1 "Attribute Change Run" process at the end. You can ignore the warning.
    Bye
    Dinesh

  • Attribute Change Run Process

    Dear All,
    I have scheduled a Process Chain Run in BI7. All the Process has run successfully. But there is some problem with the Attribute Change Run.
    At the start of the Process Chain all the colors of Process was green and gradually all the Successful process is turning from Green to Normal Color,but in the attribute process change run the Green color is not yet gone. So i am not getting any idea if my attribute change run has run successful or it is still running?
    Plz help

    Hi Anup,
    What is the status of the attribute change run for your infoobject? whether it is successful?
    If it successful then no issues. The attribute change run happened.
    coming to process chain. there might be some problem in updating the process chain coloring.
    Dont worry about the process chain coloring just chk whether the described job is completed or not.
    orelse chck in SM37(background jobs) so that you can know whether the process event attribute change run happened or not?
    Rgrds,
    Ravi

  • What is the back ground job when we run an Attribute Change run ?

    Dear One´s,
    What is the back ground job when we run an Attribute Change run ?
    Thanks in advance,
    Raj

    Hi Raj,
    1. If the attribute change run is triggered through process chain the job name is 'BI_PROCESS_ATTRIBCHAN'
    2. If the change run is triggered from RSA1> tools?Appl Heirarchy/Attribute changerun then the job name starts with BI_STRU*
    3. If you trigger the program RSDDS_AGGREGATES_MAINTAIN from SE38 then the job name will be RSDDS_AGGREGATES_MAINTAIN
    Hope this helps...

  • Attribute change run for Customer

    Hi All,
    I did a delta load of the customer data and got some new and changed records. I remember that we need to do an attribute change run after loading any master data. To do that, I went through the menu path Tools Apply hierarchy/Attribute change run...but couldn't find anything there. Do I need to do anything to get the "Customer" here to do the attribute change run.
    Thanks,
    RPK.

    Hi
    Go to
    Tools-->Apply hierarchy/Attribute change run
    Oncle ur there click execute to start change run,It will staart and finishes the Attribute change run.
    If u want to see the list of objects click on the 'InfoObjectlist' on the Tools-->Apply hierarchy/Attribute change run screen
    Assig point if it is helpful

  • "Attribute Change Run" process has to follow process "Execute InfoPack

    Hi All,
             i created process chain for M.D SD area. here i created start varient, then execute info package process created and when i am checking that it showing some warning message like ....
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4B9B5FH2BTQJOBTBAWHVM5ZY2 in the chain.
    Here i can't understand what i have to do....
    Any inputs for this...........
    Thanx in Advance
    Subbu.

    hi,
    Check master data objects in both process types "Excute info package" after start varianet and in attribut echange run process type.
    Both should match or system will throw error message.
    The concept is like Attribute change run has to run when ever new data is loaded to master data attributes.
    Regards,
    Arun Thangaraj

  • Process chain error - Attribute change run

    Hi,
    I am creating a Process chain to load 4-5 master data with its text.
    I get a error while executing :
    it says : Attribut change run need to be set up.
    what should i do
    1 :where should i set it up and how ??
    2 :why is that needed ??
    I included it in the Process chain and still it says that i need to set it up in the administrative workbench .
    Please help me understand .
    Thanks,
    GG

    Hi , when i execute a Process chain it stops at the A Master data load package and i get that red.
    if i double click it ,
    It says that
    Attributes are not yet maintained.
    If i see the details,it says
    Diagnosis
         The attributes have either not yet been created or activated.
         The data cannot be taken from the source system without maintained
         attributes. Therefore, this data request is not possible.
    Procedure
         Maintain the attributes for this master data-InfoSource in the
         Administrator Workbench and then activate them.

  • Process Chain Attribute Change Run

    Hi Experts,
    I am working BI 7.0 version, I am try to run Process chain showing warning Error in Infopackage level, Please find the below Error Message:
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage"  var.ZPAK_4DLO5GB778XTBBM57040KMRW4 in the chain
    Please provide me solutions, how to solve this issue, Please ASAP.
    Thanks & Regards,
    Bharathi.

    Hi All,
    Thanks a lot for ur assistance.
    Thanks & Regards,
    Bharathi.

  • Attribute Change Run Process chain

    Hi,
    We have a attribute change run step in Process chain with "selective infoobjects".
    But when it executes it runs attribute change run for all infoobjects apart from what i have mentioned in the variant.
    Proof:
    I had a snapshot of infoobject list in RSA1->Tools->Attribute change Run before executing process chain in which i saw info objects other than what i had in the variant.
    I ran the process chain.
    Again I saw the infoobject list RSA1->Tools->Attribute change Run and it was empty!!
    Even though I mention some infoobject in process "Attribute change Run" It runs for all info objects irrespective of what I maintain in the variant.
    This causes problem and creacting lock. If anyone ever observed this problem and resolved please let me know!!
    Thanks
    VJ

    well here is the POC ,I have nw204s SP-12 .
    Steps followed -
    Monitor of change run - 3 infoobjects currently waiting for CR.
    Built PC with Process type "Attribute  Change"  only ..no other process types barring "Start" which is imperative.
    Included only 2 Infoobjects from the 3 aforementioned.
    Scheduled as immediate and it executed CR for the 2 only,so my CR monitor shows now 1 pending for CR to be run,which is as expected.
    So as per Proof of Concept sp-12 works with process type "Attribute  Change"
    You may wish to check your process chain again and in worst case raise an OSS to SAP.
    Hope it Helps
    Chetan
    @CP..

  • Process chain hangs when reaching AND process before Attribute Change Run

    Hi Experts,
    I have the following problem. For some reason my master data attribute process chain hangs when it reaches the AND process variant right before the Attribute Change Run. It does not go anywhere from that point.
    Thank you

    hi AG,
    if this is hanging daily at the same place without proceeding further, and with out giving the instance for the same. then the better way is to replace that AND process in the chain with the new AND process. and then check and activate ur chain. this wil solve ur problem.
    if this is the first time that happend to u, then check the previous load status, if any of the load has failed and u didnt turned the status of the process then also this can happen. So please do check it and act accordingly. If u cannt find the resolution then please run ur changerun manually.
    u can use RSPC_PRCESS_FINISH FM to convert the status of any process. for this u need to give instance and variant details. and then if u execute, then chain will continue further.
    Hope this will help you.
    thanks
    Vishnu

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • ABAP program to add in the process chain before the attribute change run

    Hi
    I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
    Regards,
    Satish

    I am not sure of any standard program .... but you can write your own... should be a small one..
    you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

  • Problem in Activating Hierarchy Attribute change run through process chain.

    Hi All,
    I have the problem in Hierarchy change run processw running through process chain..and also process chain completes successfully without any error..
    Even hierarchy change run  completes successfully the hierarchy objects are not activating,
    so daily when i have to activate hierarchy objects manually..
    and what i did was in one attributechange run process i have included 10 hierarchy object is it correct or else i have to separatly create 10 attribute change hierachy proceess in the process chain.. pls through some lights on this issue
    With regards,
    Hari

    Hi venkat,
    Yes.. i already include the save hierarchies process in process chain...
    my main problem is hierarchy infobject are not activating  using process chain and also even process chain is not giving error message.. and in which log table the hierarchy objects are maintained (such as run time, date , status etc..).
    IS there is any other settings to be made in process chain..
    with regards,
    hari

Maybe you are looking for