ATTRIBUTE7 in OKC_K_LINES_B table not seen in lease contract

Hi,
When i enable the ATTRIBUTE7 in the context Global Data Elements for Application- Lease management and Title - Contract Line Additional Information, I expect the DFF to be visible in the lease contract from lease center administrator or Lease super user.
But I am not able to find the DFF any where. Kindly let me know where can i find the DFF in the front end.
Thanks and Regards
Sathya

Hi Guys,
I got the answer of this query.
Amount at line as well as at Header level for a service contract was getting calculated in negative.
Cause: There was a Discount modifier set up at Header level and Line level. Discount at header and line level combined applied was greater than 100% which is why the amount was getting calculated in negative.
Modifier on Header and Line level can be checked as below.
: keep the cursor at header then go to Tools>Price Adjustment--- check the Rate column
Vice versa for line level.
Thanks
Deep

Similar Messages

Table not seen in the layout

Hi All,
I wanted to display table in adobe form. I got the internal table from the interface to the context of the form.
When designing the form, i dragged and dropped the table from data view to the form designer. I assumed a table element is created on the designer. But a group of textboxes are created with all the table elements.
When i wanted to create a table manually, i couldnt find table element in the pallette. Everything else like, textbox, dropdown box etc are present, but not the table. How can i display the contents in the form of a table now? Am i in the wrong version of adobe forms?
Thanks,
Satish Challa.

Hi,
To create a table in the layout designer just goto the "Table" menu in the adobe livecycle designer toolbar, in that select "Create Table" and when you click on that a popup opens up based on your choice select a radiobutton and create the table, this is no where related to webdynpro, it only from layout designer perspective. After creating this table then bind the relevant fields of that table to the webdynpro context table in form as specified by me in the previous message.
I think from Adobe LiveCycle Designer version 7.1 the "Table" menu toolbar option is provided. If yours is lower verion then try to upgrade to latest version or alleast version 7.1.
Regards
Pradeep Goli
Edited by: Pradeep Goli on Jun 4, 2009 8:17 PM

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

CLEAN_REQREQ_UP results in "Buffer Table not up to date"

Dear all,
we are getting an error while running CLEAN_REQREQ_UP (SRM 5.00 / SAPKIBKT11).
Without any selection, the report runs into a "Buffer Table not up to date" error. All scheduled jobs also get aborted.
Tried to reset the buffers using $sync. Does not help. I appreciate any further input.
Cheers,
Claudia

Hi Claudia,
All scheduled jobs also get aborted.
The above problem will mostly occur (i.e. all the background jobs fail) when the database arhieve log/paging is full and the system is not able. Please ask your basis consultants to increase to get this fixed.
Then we have seen quite a few instances in which the job CLEAN_REQREQ_UP goes to similar runtime error:
1. Due to inconsistent document entires in table BBP_DOCUMENT_TAB (usually such documents are created through interfaces, or gets copied during client/system copy etc).
2. The system goes into this runtime error two chances a) While updating the status of these docs or b)while reading these documents
3. The other possibility could be because of custom smartform developments as well
We faced similar situations before and they have all been because of one of the above issues, and we deleted these entries manually. Hope this helps you get them resolved.
Regards
Kathirvel

Base table not found

CF5 Newbie needs help.
I am trying to create a webpage with a searchable access
database that displays photos.
I am getting the message ODBC Error Code = S0002 (Base table
not found). I have verified my database.
Maybe there is a problem with one of my initial files. I have
the search, results and details querry set up am I missing an
additional file here that would cause this problem?
Thanks -any help is greatly appreciated,
Jen

Hi,
pPerhaps one should explain some basics about privileges in the database.
You connected as sysdba, named superdba.
The table(s) you are looking for have been created by the user SAPAJ4DB.
If a user creates a table, noone !!, really noone is allowed to select them except this owner.
Not even the sysdba is allowed to select them.
And it is good that it is like this. I personally do have some private info in tables and do NOT
want to let them being seen by my boss being the sysdba of the db.
If the owner wants to allow access to this table, he has to grant privileges to other users.
There are select, insert, update, delete ( to name the DML-privileges ).
If the owner of the table you are looking for, did not do this, the sysdba is not allow to see them.
And then he will receive the error -4004.
Yes, the table DOES exist. But for the user not having a privileges for this table,
this table looks like not existing, causing this error to occur.
Therefore: connect as the owner, select there what you want.
And then think about your needs and grant the corresponding privileges to other users / the sysdba.
Have a nice weekend,
Elke

2 fact Tables not joining to all the same dimensions

Hi there,
I have 2 Fact tables
1) Errors (count)
2) Tasks (count)
both share the following dimension - customer
and both have a dimension that joins only to itself
1) Errors type (joining to errors Fact)
2) Tasks type (joining to Tasks Fact)
In Answers I can see customer and errors count and task count together
When I add Errors Type, the Tasks count returns 0 (it doesn't disappear)
When I add Tasks Type, the Errors count returns 0 (it doesn't disappears)
customer - errors count - tasks count
xyz 2 8
customer - errors count - tasks count - task type
xyz 0 8 abc
customer - errors count - tasks count - errors type
xyz 2 0 123
I have seen some documentation on fact tables not joining all dimensions but any help would be appreciated
Thanks

The end game would be to be able to see the following:
customer - errors type - errors count - task count - tasks type
xyz 123 2 8 abc
Initially I would take the either or:
customer - errors type - errors count - task count -
xyz 123 2 8
customer - errors count - task count - tasks type
xyz 2 8 abc
I think there is something I ned to do in the Repositry?

BORDER LINES NOT SEEN ON PRINTOUT

Hi gurus,
I have an interesting problem. I developed a smart forms. It works clearly. I create the preview then get a printout, everything on the paper is OK. However, when ı get the printout by printing immediately, I mean without previewing it, The borders not seen on the paper. What may be the problem.
Thanks in advance..

Go to the table in smartform and change the Horizontal Alignment of the smartforms... may in left or right. and similary in the template portion of smartforms. I am sure it will chnage and the border line would shown in printing.
Regards,
Akg

Return values not seen in previous records

I'd like to be able to return Code values below that have not occurred previously (ordered by ID). I have a feeling it's going to involve a ROW_NUMBER() and CTE, but I can't quite put my finger on it. See the example below.
DROP TABLE #codes
CREATE TABLE #codes (ID INT NOT NULL,
Code VARCHAR(20) NOT NULL)
ALTER TABLE #codes
ADD CONSTRAINT pk_codes PRIMARY KEY (ID, Code)
INSERT INTO #codes (ID,
Code)
VALUES
(1, 'A'),
(1, 'B'),
(1, 'C'),
(1, 'D'),
(1, 'F'),
(2, 'A'),
(2, 'B'),
(2, 'C'),
(2, 'D'),
(2, 'E'),-- not seen in #1 - return this record
(3, 'B'),
(3, 'C'),
(3, 'D'),
(3, 'E'),
(3, 'F'),-- not seen in #2 but was seen in #1 so no need to return this record
(3, 'G') -- not seen in #1 or #2 - return this record
SELECT *
FROM #codes
ORDER BY ID, Code
I need a query to return (2, 'E') and (3, 'G') because they did not occur in ID's prior to them. Hope this makes sense. Any help?
Thanks!

In case you have to consider any row that is present only for ID = 1 like (1, 'Z'):
CREATE TABLE #codes (ID INT NOT NULL,
Code VARCHAR(20) NOT NULL)
ALTER TABLE #codes
ADD CONSTRAINT pk_codes PRIMARY KEY (ID, Code)
INSERT INTO #codes (ID,
Code)
VALUES
(1, 'A'),
(1, 'B'),
(1, 'C'),
(1, 'D'),
(1, 'F'),
(1, 'Z'),--You may need this value because it is not present 2 and 3 below
(2, 'A'),
(2, 'B'),
(2, 'C'),
(2, 'D'),
(2, 'E'),-- not seen in #1 - return this record
(3, 'B'),
(3, 'C'),
(3, 'D'),
(3, 'E'),
(3, 'F'),-- not seen in #2 but was seen in #1 so no need to return this record
(3, 'G') -- not seen in #1 or #2 - return this record
;WITH CTE
AS
SELECT *, ROW_NUMBER() OVER (PARTITION BY Code ORDER BY id) rn
FROM #codes
SELECT id, Code
FROM CTE
WHERE rn = 1 AND ID <> 1
--In case you need any row that is part of ID = 1 only: use with below code
UNION ALL
SELECT CTE.id, CTE.Code
FROM CTE
JOIN
SELECT CODE FROM #codes WHERE ID = 1
EXCEPT
SELECT CODE FROM #codes WHERE ID <> 1
) T ON CTE.CODE = T.CODE AND CTE.ID = 1
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

Published ASNs not seen in SNC

Hi,
We have an issue where the Published ASNs are not seen in the ASN Overview report in SNC. Supplier indicated they created an ASN and ASN number was generated for it. Upon Investigation, the ASN number provided by the supplier did not show up in SNC. There was no XML found for ASN and there were no signs of the ASN number in the header table. There are also no logs found for user in SLG1 and no short dumps found as well. I could not replicate the same issue in Quality.
Has anybody come across this sort of issue? Request your inputs in finding the reasons why the ASN number was generated and published but went missing in SNC.
Thank you.
Sreedhar

Hi Sreedhar,
Can you check what master data is valid or not?
There can be some issue and hence system is not publishing ASN.
How supplier is creating ASN.(try to get detail level steps for ASN creation)
This will help you to replicate the issue in Q system.
Regards,
Nikhil

The new Page Tab is not seen

Hi,
I'm working with Server Database and I added the new page tab is not seen.
I already compiled and valided the project. Also I already restart the server.
New Project: Xxaa New Project
My New Page Tab has like screen: Xxaa New Screen
My New View: Xxaa New View
I added the new page tab in the Application “Siebel Universal Agent” and I compiled the project “Xxaa New Project” and “Siebel Universal Agent”. After I logged to “Call Center” but I don’t see the new Page Tab
I navigated in application “Navigate --> Site Map --> User Preferences --> Tab Layout”, but my new page tab "Xxaa New Screen" isn't checked the flag "Hide"
Also I added new Responsibility: "Xxaa New Responsibility" and I added the new view "Xxaa New View" and the User SADMIN has grants.
What I need to do?
Edited by: Wings2009 on 15-jul-2009 19:03

Hi, the all objects are news.
I created these objects:
1- New Project : Xxaa New Project
2- New Table : CX_PROJECTS
3- New Business Componet : Xxaa New Business Component
4- New Business Object : Xxaa New Business Object
5- New View : Xxaa New View
6- New New Applet : Xxaa New Applet
Finally I added the new screen (Xxaa New Screen) to application "Siebel Universal Agent" in the new page tab. I compiled the all objects and projects and I copied the file srf to the SERVER. And I created new responsibility (Xxaa New Responsibility) and I added the view (Xxaa New View) in this responsability.
But the new tab is not seen.

Ipod not seen by windows or itunes

Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.

I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1

5th Gen IPOD - Won't Sync and Not Seen by Windows

Help!!!
Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

IPod touch: Seen by XP, not seen on OSX.

Strange one.
1st Gen ipod Touch with latest software(think its 3.3), latest version of itunes.
Its seen and works perfect with Windows XP.
I plug it into my Mac Book Pro, running Lion and its not seen. nothing happens wihen i plug it in.
I have reset, restored and wiped the ipod from the device itself and its still not seen.
I also tried it on a Win 7 machine and its NOT seen either.
Is this something crazy to do with 32bit architecture. Its seen on Win XP which is 32 but not by 64bit Lion and Win 7.
Any suggestions?

Have a Look Here
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

ATTRIBUTE7 in OKC_K_LINES_B table not seen in lease contract

Similar Messages

Maybe you are looking for