Attributes dissappear from the formula variable after upgrade

Hi,
We have upgraded from 3.X to 7.X. When i run the reporrt, i get the error saying that attribute XXXX for characterstic 0object in variable ZFormula variable couldn't found.
When i went and checked in the formula variable, under replacement path
Replace variable with
Info Object
Replace With
Attribute value
Attribute
I couldnt find my XXXX attribute but with error mesage.
I tried to create a same formula variable,but could't find the XXXX variable under ATTRIBTE.
I coldnt find the proper solution or note. Did anyone had issue like this?
Thanks
Annie

Hi,
Thanks for the replies. But my issue is not with variants. Attributes are missing when I try to assign attribute of char in replacement path and also in my exception aggregation in query designer, reference char isu201D-1u201D. I am not very sure how can it be u201C-1u201D. Is it upgrade issue?
Thanks
Annie

Similar Messages

No sound from the 'Music' app after upgrading to iOS 5

After upgrading to iOS 5 I went to play music in the new 'Music' App. However, no sound came from the iphone (3gS) athough the songs continued to play. Has anyone encountered this issue and how have you resolved it. I thank you for responding to my question.

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Why can't I update/ download apps from the app store after upgrading to iOS 7.0.3?

I have an iphone 5 and updated my phone to the lastest version (ios 7.0.3) last night. I can't download/ update any apps from the app store using my cellular network. The only error message is that the app cant be downloaded at this time. As soon as I click the download button, the image of the icon shows up with "Waiting" underneath the icon. I tried tapping on the app icon to pause the download but that isn't working. I have disabled Wi-Fi setting and enabled"the use cellular data" option in the itunes and app store setting page. Memory is not an issue because I have a lot of memory available. In the cellular setting page the App Store is enabled to use cellular data. It seems like it is a setting issue. What can be done to fix this problem

Thanks for your suggestion. Not long ago before I saw your response I tried to download the app and I seemed to have some progress (I had 5 bars and 1x). It looked it was 3/4 of the download complete only to have the same error message.
Since then I reset the phone and I have tried downloading the app when there 5 bars with 3g. Every time the icon has waiting underneath it and I get the same error message.

I can't upload photos to facebook from the photo library after upgrading to iOS 8

AFter updating ios8 i can't upload photos from photo library to fcebook..even i can't upload photos with safari browser...what can i do now??

It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook?

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

Unable to print from HP Laserjet P1102 after upgrading to Mavericks

Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Stuck in a "loop" at the login window after upgrading to Leopard

I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
Apple

If Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim

Problems to reconize the sim card after upgrade itunes, what should I do???

Problems to reconize the sim card after upgrade itunes, what should I do???

Get a SIM card from the carrier to whom the phone is legitimately locked.

Applying order by for the data comming from the formula column

Dear Friends,
I am having a report in which some of the columns in which data is comming from the formula columns,but i need the data in asc order.
How can i do it.
Please advice.

I am having a report in which some of the columns in
which data is coming from the formula columns,but i
need the data in asc order.Lets say you have this query:
select empno, sal, comm from emp
And you have empno, sal, comm and a formula column 'f_percentage' in one group. Add one dummy column in the query, like this:
select 'temp' temp, empno, sal, comm from emp
Move this 'temp' column into the second group (drag and drop outside the first group). You don't have to create repeating frame/or need to show this 'temp' column on the report.
Now if you use break order on formula column, that should work. Make sure you have break order on other columns also. Arrange items (change order) in data model as you needed. Run your report before and after this change and make sure you have same number of rows before and after this change.
(from reports builder's help)
"Break Order has no effect on columns that belong to the lowest group of a particular query. Break Order only affects columns in groups that are above the lowest child group of a query"

The type of the value being assigned to variable ... differs from the current variable type

I am trying to load a variable on SSIS Execute SQL Task with a string value. I keep on getting an error message :-
“The type of the value being assigned to variable “User::LegacyColumns” differs from the current variable type”.
Below are the settings on my package:
Execute SQL Task Result Set –
Single Row
Variable Data Type –
String
The data to be loaded on the variable is a single row shown below:
FirstName,LastName,MiddleName,PatientType,Title
Can someone kindly help me to solve this as I’m lost for ideas.
Thanks,
Mpumelelo

Thank you Sorna. I think I have managed to solve it. After a long search I have found a solution which advises that I should use a Foreach Loop Container. The help is on this link:
https://social.msdn.microsoft.com/Forums/en-US/f46dea91-c26b-4ffe-ab1c-ebeef57c90b6/error-0xc001f009-at-mypackage-the-type-of-the-value-being-assigned-to-variable?forum=sqlintegrationservices
Mpumelelo

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Hey DebC2001,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with iMessage. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't e-mail from Safari's Reader after upgrading to 7.0

How come I can't e-mail directly from Safari's Reader after upgrading to 7.0? That was a great feature. Why did Apple disable this or is something wrong with my Safari browser?

Thanks. I didn't know the command but the old version had a menu that appeared at the bottom of the page.

How can I retrieve my calendar info that was sucked from my iPad 2 after upgrading to OS V and backing up to iCloud (using Windows XP computer with Outlook)?

How can I retrieve my calendar info that was sucked from my iPad 2 after upgrading to OS V and backing up to iCloud (using Windows XP computer with Outlook)?

I think (and I'll double check) only the BBLink events will sync on a wired USB sync. I'm fairly certain of that.
You'll need to use your calendar syncing via an EAS email account (outlook.com, for instance, is free) to sync wirelessly. It works great. I use it and was a former tied to the USB sync guy as well... and I thought I was gonna die a painful death without it. I found more freedom this way.
This explains the process. But I don't think you'll get BBM Groups to sync.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/How-To-OTA-Sync-BB10-and-non-BES-Outlook-Overv...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Attributes dissappear from the formula variable after upgrade

Similar Messages

Maybe you are looking for