Attributes does not display in version details

When i click on the versions icon for an item
it does not show the item attributes like the create date or expire date etc..
It does show the properties icon but this properties window does not show all the
attributes!(example it does not show the create date)
Is there a way to show these attributes in the item version display page?
Is this going to be taken care of in 308?
Any help will be highly appreciated
Thanks

Thanks for the reply.
We are running ver 3.0.6.6.5
I am talking about the page which pops up
when u click on the versions icon associated the item.
In the version i am running i get a two column display.
1st column is empty
2nd column is the link the respective file version(and the property icon)
null

Similar Messages

RH7 - Custom WebHelp Pro skin custom "Print" button does NOT display in version published to RH Server 8

I customized a WebHelp Pro skin using the Omega skin as the basis. Everything works fine except the Print button, which I added using the same Action as shown in the BeautifulVista skin's Print button.
Local Version (C: drive)
When I generate my help project and view it locally from my C: drive after I accept the warning about viewing locally, I see the Print button.
However, it does NOT work. I've attached a graphic that shows the local version and the skin dialog where I set up the action for the Print button.
RH Server 8 version
When I view the same project after I publish it to the server, the Print button does NOT display.
QUESTIONS ARE:
How do I get the Print button to function properly (active printer dialog)?
If it can't work until it is published that fine but then how do I get it display when I view from server?

Hi there
Have you tried editing your Window Definition?
Click View > Pods > Project Setup
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Report Column Attributes Does Not Display All the Column Names

Good Morning,
I have an interactive query Select * from table_name. I have to select * since my query returns well over 32k. I have 162 columns in the query. On the screen, all the columns are displayed; however, on the report tab, only about half of the columns are displayed. The rest are cut off. I need to be able to go into these field's attributes. Is this an APEX bug, or am I just missing something.
Regards,
Kelly

Hello Tony,
I can't break them out because APEX is limited to one interactive report per page. There is need to be able to do computations on the data, which interactive reports allows. The data is all statistical.
Regards,
Kelly

ISA invoice detail does not display data R/3 E-commerce 5.0

I´m using R/3 Internet Sales B2B.
I´m in area for search transactions and I have selected invoices, credit memos or down payments. When I click one of these documents, the system does not display any data in the detail screen.
Any idea?

Full Message Text
An exception has occurred: java.lang.NullPointerException
at com.sap.isa.isacore.action.GenericSearchBaseAction.addRequestedFields(GenericSearchBaseAction.java:525)
at com.sap.isa.isacore.action.GenericSearchBaseAction.buildSelectOptions(GenericSearchBaseAction.java:140)
at com.sap.isa.isacore.action.GenericSearchISAAction.ecomPerform(GenericSearchISAAction.java:65)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
[EXCEPTION]
java.lang.NullPointerException
at com.sap.isa.isacore.action.GenericSearchBaseAction.addRequestedFields(GenericSearchBaseAction.java:525)
at com.sap.isa.isacore.action.GenericSearchBaseAction.buildSelectOptions(GenericSearchBaseAction.java:140)
at com.sap.isa.isacore.action.GenericSearchISAAction.ecomPerform(GenericSearchISAAction.java:65)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

The control of adf media does not display even the Control attribute is set

Hi
I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
Can anyone help me?
Thanks

try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

HELP! Ovi suite does not display Photos only thumb...

Hi, please help. Ovi Suite does not display Photos saved in my computer. Just getting Default grey image for everything on the thumbnails. OS XP home (Service ack 3). Run the repair and nothing. I uninstalled the application deleted everything to do with Nokia. Downloaded the application again and still the same problem. Nokia Ovi version 3.1.0.84. The only problem is that, Just shows grey thumbnails and no thumbnail photos. See screenshot attatched
I followed this troubleshooting steps and it still the same issue!..
Step 1
- Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Repair.
Once repair is completed then please restart computer and check.
If Step 1 didnt work, then try the below step
Step2
-Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Uninstall
Also uninstall the following f
- Nokia Connectivity Cable Driver
- PC connectivity Solution
Then right click my computer, click manage.
- Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
Then reinstall windows Installer from the link provided below
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&di...
- Then restart computer.
- Download and install Ovi Suite
- Restart Computer again
- Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
- Once done then lauch Ovi Suite.
- Check for the issue
Attachments:
Dibujo.JPG ‏83 KB

I guess sometimes this happens when the direct x is missing or corrupted in the system. Please download and install from the link provided below.
http://www.microsoft.com/downloads/en/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3
Make sure you restart the computer when the installation is complete..
Hopefully this helps
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

OVI SUITE does not display PHOTOS as thumbnails.

HELP! Ovi suite does not display Photos as thumbnails, see screenshot attached.
12-May-2011 01:19 PM
Hi, please help. Ovi Suite does not display Photos saved in my computer. Just getting Default grey image for everything on the thumbnails. OS XP home (Service ack 3). Run the repair and nothing. I uninstalled the application deleted everything to do with Nokia. Downloaded the application again and still the same problem. Nokia Ovi version 3.1.0.84. The only problem is that, Just shows grey thumbnails and no thumbnail photos. See screenshot attatched
I followed this troubleshooting steps and it still the same issue!..
Step 1
- Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Repair.
Once repair is completed then please restart computer and check.
If Step 1 didnt work, then try the below step
Step2
-Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Uninstall
Also uninstall the following f
- Nokia Connectivity Cable Driver
- PC connectivity Solution
Then right click my computer, click manage.
- Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
Then reinstall windows Installer from the link provided below
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&di...
- Then restart computer.
- Download and install Ovi Suite
- Restart Computer again
- Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
- Once done then lauch Ovi Suite.
- Check for the issue
And this did not work, I also installed DIRECTX and still it did not work, PLEASE I WOULD LIKE THIS TO BE FIXED!
Regards to all.
Attachments:
Dibujo.JPG ‏83 KB

I guess sometimes this happens when the direct x is missing or corrupted in the system. Please download and install from the link provided below.
http://www.microsoft.com/downloads/en/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3
Make sure you restart the computer when the installation is complete..
Hopefully this helps
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

Show CD on CD insert does not display info

When loading a CD, iTunes does not update and show the new album info. Last album continues to display. Advanced preferences are set to "show CD"

Latest available is the simple answer
Console OES2 SP2 Oct 2009
Netware 6.5.8 with most (if not all post SP8 patches)
4.91 SP5 IR1
Seb
"Simon Flood" <[email protected]> wrote in message
news:guHDq.62$[email protected]..
> On 07/12/2011 09:45, Sebastian Cerazy wrote:
>
>> I have it on quite few IPs from DHCP that java console does not display
>> the
>> info, it just hangs there
>>
>> Most are displayed OK
>>
>> Not much of a problem, I use iManager is the console does not work, but
>> would like to know why it does it
>
> Versions please:
>
> * What version of the DNS/DHCP JavaConsole are you using?
> * On which platform?
> * If installed, what version of the Novell Client?
> * What version of OES2 are you running?
> --
> Simon
> Novell Knowledge Partner (NKP)
>
> ------------------------------------------------------------------------
> Do you work with Novell technologies at a university, college or school?
> If so, your campus could benefit from joining the Novell Technology
> Transfer Partner (TTP) program. See novell.com/ttp for more details.
> ------------------------------------------------------------------------

Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Dunning Letter XML not displaying XML version of Dunning Letter

I have changed the Output Format for "Dunning Letter Print from Dunning Letter Generate" to XML. When I run the Dunning Letter Generate process, though, the XML output in the Dunning Letter Print from Dunning Letter Generate does not display the XML of the Dunning Letter. Instead, the following XML is displayed:
<?xml version="1.0"?>

<ARDLP>
<LIST_G_CORRESPONDENCES>
</LIST_G_CORRESPONDENCES>
<R_INTEREST_RATE></R_INTEREST_RATE>
<R_DEFAULT_COUNTRY>NL</R_DEFAULT_COUNTRY>
<C_TRX_NUMBER>APP-00001: Unable to find message: AR_REPORTS_TRX_NUMBER</C_TRX_NUMBER>
<C_PO>APP-00001: Unable to find message: AR_REPORTS_PO</C_PO>
<C_DEBIT>APP-00001: Unable to find message: AR_REPORTS_DEBIT</C_DEBIT>
<R_DEFAULT_COUNTRY_DESC>M-3M-WM-4M-zM-6M-uM-5M-e</R_DEFAULT_COUNTRY_DESC>
</ARDLP>
Is there any specific setup required to generate the appropriate XML for the Dunning Letter?

Kit
It is definitely possible to use XML Publisher for dunning letters. I would suggest your sample run did not select anything for dunning as the XML looks correct otherwise. The problem with this approach is that it is not a single step process to get the letters. You will only ever get XML from the dunning letter print report as there is nowhere in the submission screen to tell it what template to use. Therefore you will need to modify the after report trigger to submit the XML Report Publisher concurrent program to automatically pick up the XML and create the letters.
You might want to look at the standard functionality in collections or advanced collections (not sure about collections but definitely in advanced) as there is some standard functionality in there for Dunning which uses XML Publisher templates. The setup is a bit onerous (not sure what the developers were thinking) but at least you can use XMLP as standard.
Cheers,
Dave

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to *
* compile the currently running kernel. This can cause unpredictable *
* behavior in kernel drivers and should be fixed. *
* gcc version: Linux) *
* kernel compiled with: 4.3.2 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name : kernel-source Relocations: /usr/src
Version : 2.6.27.29 Vendor: openSUSE
Release : 0.1.1 Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST Build Host: rinck
Group : Development/Sources Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size : 309251954 License: GPL v2 only
Signature : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager : http://bugs.opensuse.org
URL : http://www.kernel.org/
Summary : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
 Linus Torvalds <[email protected]>
 see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Attributes does not display in version details

Similar Messages

Maybe you are looking for