Attributes editable after creating Virtual Warehouse in RMS

Hi,
As per RMS 13.2 user guide; both description and channel of a virtual warehouse can be edited after creation for a VWH. But I can edit only the description. (Multi Channel is set to Yes). Can someone confirm if channel is editable.
Thanks.

Hi ????
Bug 14731344 was raised in Oct 2012 (by you ?) which says this will be fixed in patchset 13.2.6.
So the answer is yes - it should be editable. It is for me in v12.1 with multichannel on.
Alan

Similar Messages

Server loses internet connection after creating virtual switch in hyper-v

On a fresh Server 2012R2 Essentials install, I set up Hyper-v and created an external virtual switch. Connection to the vm is good but Health Report no shows loss of internet connectivity and that the router is incorrectly setup.
However, I still have a working internet connection? I worry that the server may not update or allow Anywhere Access at some time. Any suggestions? Thanks

If Hyper-V virtual switch behaves strange and server is destined for testing, then it's correct and I recomend delete this virtual switch and create it again.
Here is some issues with internet connection and Hyper-V switch, none of them does not match your problem, but can be inspirative for troubleshooting:
Windows 8 Hyper-V - how to give VM internet access?
Hyper-V kills internet connection when bridging
Configuring Hyper-V for multiple subnets with only one NIC (Server 2008 R2 Edition)
How does basic networking work in Hyper-V?
Best Regards,
thennet

Cannot create Virtual Directory in Windows Server 2008 R2 SP1 Environment

Dear all,
I am trying install Reporting Services 2005 on a Windows Server 2008 R2 SP1 Enterprise machine.
So far we successfully did the following steps
- Install SQL Server Reporting Services
- Configure Service Account (Domain-User)
After creating virtual Directory, we made several steps to avoid HTTP 400 Bad Request in Report Manager:
1. Disable LSA Loopback in Registry and restart server
2. Enhance Service Startup time to 60000ms and restart Server
3. Set Application Pool to ASP.NET 2.0 Classic Mode
4. Modify RSWebApplication.config and set These entries:
<ReportServerUrl>http://servername/ReportServer</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
After all the Reporting Services Configuration Manager still shows a red sign and we cannot continue creating the database.
How is it possible to solve this?
We appreciate any help.
Best regards,
Mark
Mark Kuschel
Blog
Xing

Hi Mark,
As per my understanding, we can refer to the following methods to troubleshooting the issue you occurred.
Install SQL Server 2005 Service Pack 3.
Deleting the newly-created virtual directory using IIS manager and then rebooting the server.
In the Report Manager Virtual Directory dialog box, create a virtual directory for Report Manager, then change the Website to Reporting.
Enable Apply default settings.
The following link is for your reference:
http://www.mathgv.com/sql2005docs/SQL2005ReportingServicesInstall.htm
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

After creating a form, how do I download it for further editing with Adobe Professional XI?

After creating a form, how do I download it for further editing with Adobe Professional XI?

This is probably a new precaution that Apple has taken to alert folks that something has occurred with their account that has not occurred before*, namely a Mac has downloaded something from their account that has not done so before. And as the notice says, if it was you doing so, then you may safely ignore the notice. Also, do not be alarmed, Apple refers to all downloads as purchases, even when they are free.
But if you are truly concerned about the notice then you can authorize the Mac with your iTunes account, which should be the same as your MAS account. Open iTunes on the older Mac and sign into your account. Then in the Store menu choose Authorize This Computer. Now this Mac is definitely associated with your account and can now play media that you purchase from the iTunes Store as well.
*My banks do the same thing when I pop up making a purchase with my bank cards somewhere in the world I have never made a purchase before. They call me and email me and want to know if it is indeed me using the card.

Error when try to power on virtual machine after creating

I created the virtual machines from the virtual machine templates in the OVM server Manager console.After creating,status of the virtual machine turned to be power off. Then I tried to power on it. But it prompt error as " failed:<Exception: no server selected to run vm('/OVS/running_pool/18_Test01') mem_size=1024>".Then I check the /var/log/xend/xend.log. I can found messages of "VmError: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?".
How should I deal with this error?
Thanks a lot,
Mary

Please check whether your box support fully virtualized guest or not beforehand.There are two main requirements for the hardware virtualization is to be enabled in a system:
1. BIOS should be setup for virtualization
go to "BIOS Setup" to enable "Virutalization Technology"
2. The CPU should support virtualization
check the keywords( "vmx" for Intel cpu "svm" for AMD cpu) from /proc/cpuinfo

New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7

New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7 workstation.
Windows 2008r2 hosts the hyper-v server. I can create VMs and VHD's when connecting to the server locally with the hyper-v manager.
The issue arises when I try to connect to the hyper-v server from my workstation which runs windows 7.
I have installed The Windows6.1-KB958830-x64-RefreshPkg.msu that was suggested for windows 7 sp1.
I can connect to the hyper-v server, create vm's but I cannot create vhd's the gui just hangs with no errors in event log or on screen.
The files are there on the hyper-v hard drive but i suspect they are just created by windows as they are written and are not valid.

I've had just the same solution. Both did Hang Fixed size and flexible.
Two parts were taken:
1 - KB939820 for Windows 2003 server based domain controllers
2 - disable using IPv6 on your NIC
Result - both types of VHD's are created normaly.
-----Infrastructure----
Windows 2003 Domain upgtraded to 2008R2
Windows Server 2008R2 Hyper-V - virtualisation clustered
Windows 7 Pro - Hyper-V management
Feel free to use --Mark as answer-- or --Propose as answer-- option and rate if a comment helps you or seemed usefull. -------------- Не забывайте использовать кнопки --От&#1084;етить как ответ-- или --Предложить как ответ-- и проголосовать, если
ко&#1084;&#1084;ентарий ва&#1084; по&#1084;ог или кажется полезны&#1084;.

Recovery Partion Role AFTER creating recovery DVD's?

on a DV7t:
What is the role of whatever is left on the recovery partition after creating the recovery DVD's?
Is there any reason to keep what is there?
I would love to shrink the Windows 7 partition, grow the Recovery Partition, and then install Windows XP into it.
Also see http://h30434.www3.hp.com/t5/Hardware/Partitions-in-a-dv8t-Quad-Edition-laptop/m-p/157876
David
David

Nothing changes in the recovery partition when you make the disks. After you have the disks and have tested to be sure they work you can delete the Recovery Partition. Vista and Windows 7 have the ability to resize exiting ntfs partitions. Shrink the Windows 7 partition, delete the Recovery partition then make a new ntfs partition in the extra space after the Win7 partition and use it to install Windows XP. XP does not work real well on the dv7 series you have to install a little hacked routine at startup to make the sound work and I found XP not to be too stable on my dv7-1175nr. I am now happily running Windows 7 64 bit on it and have no need for an actual XP install. If you must have XP Windows 7 Professional and Ultimate have an XP Mode which is a virtual machine....works great. I have a scanner for which there are no 64 bit drivers. If I need to use it I just fire up XP Mode. There is a full pass-through of usb devices.
Resize Partition

Strange knock / thud noises in mix AFTER creating mixdown in GarageBand

Hey
OK, so this is REALLY weird.
After creating a mixdown of a song and listening to it back in any audio program (Audacity for instance)
I can hear a knock / thud sound in my mix at the beginning and end. Unfortunately its over vocals so I cant simply delete it.
I cant hear it when I'm listening to the track itself in Garageband, only AFTER I've mixed it down.
Any suggestions on what this might be and how to fix it.
Its almost sounds like someones plugging in a guitar on a ghost track or something.
I guess it could be happening all over the song, but I cant hear it in the loud parts, only in the quet parts at the start and end of the track.
I've solod every track in Garageband and I cant hear it.
Thanks

I "Think" this might be an issue with the bass track (recorded with a real bass guitar).
Its as if (even though the track has been edited up so theres no bass sound wave playing at the beginning) there is a ghost or virtual track still there.
Like for instance Ive done a few takes of a song, and even though Ive deleted the unused takes, its still there in places. BUT its not doubled the bass up elsewhere.
Weird!

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

How to save report in PersonalCategory after creating it using java panel?

Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol Mali

Hi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                     + "SI_INSTANCE=0 And SI_ID=" + reportID;
                InfoObjects infoObjects = infoStore.Query(query);
                InfoObject infoObject = infoObjects[1];
                Webi wreport = (Webi)infoObject;
                ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
            /personalIDs.Add(Convert.ToInt32(categoryID));
               infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM

Error while creating data warehouse tables.

Hi,
I am getting an error while creating data warehouse tables.
I am using OBIA 7.9.5.
The contents of the generate_clt log are as below.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Schema will be created from the following containers:
Oracle 11.5.10
Universal
Conflict(s) between containers:
Table Name : W_BOM_ITEM_FS
Column Name: INTEGRATION_ID.
The column properties that are different :[keyTypeCode]
Success!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There are two rows in the DAC repository schema for the column and the table.
The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
If not, then what could be the problem?
Any responses will be appreciated.
Thanks and regards,
Manoj.

Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
4.3.4.3 Create ODBC Database Connections
Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
Several other users are getting the same message creating DW tables.

Unable to create virtual folder. Too many folders

Hi,
We are getting this error while trying to create new folder in UCM (even trying directly from UCM throws same error)
oracle.stellent.ridc.protocol.ServiceException: Unable to create virtual folder. Too many folders
Has anyone experienced this? If yes, please let us know how you resolved it.
Thanks!

You don't "store" anything in contribution folders. They are just webdav access points. I recommend zero folders personally.
If you want to upload files using webdav, then I suggest using one staging folder, where files can enter the system. When the document is workflowed and/or verified, it is moved out of the folder. It's more likely however that you'll need a few access points for various types of content as each folder enforces specific metadata.
Now I imagine you are after a way to store all the HR bits and pieces of one person together as a unit. Some people use Content Folios. Personally, I'd just use a metadata field that contains the ContentID of the person's master record. Any new content for that person just gets the master ContentID stamped on it. Just search for that ContentID to get all their stuff.
Regarding best practices, there are lots of quality blogs floating around. Stellent/Oracle don't talk about best practice because each system is used by their clients in a unique way... well, that's what they say.

Need to change status of incident after creating CR

Hi Experts ,
I am creating a CR from my incident as folloow up document from CRMD_ORDER tcode. That is working fine .
After creating CR i need to change the status of incindent to 'CR created" .
Means at the time of creating CR i need to change the status of incident .
1 .Please suggest me where to add code related to update incdent ?
2 . Can i use ORDER_SAVE badi or any other BADI existed for that ?
Thanks in advance ,
Vijay vorsu

Hi Rajiv ,
Thnx for quick reply. I am new to CRM .I understood whats to be done.
I am following these steps :
In my CR action profile i am creating a new action called Z_status_change.
In process type- "permitted process type of action " i am selecting as ' METHOD CALL" .
Next i am clicking on "SET PROCESS' .
Here i am getting problem . When i click on help for on METHOD system is showing existing methods .Here Which method i need to select to change the status .so i thought to create a custom method .
So i created a BADI Z_STATUS_CHANGE and in attributes of BADI i have given filter type as PPFDFLTVAL .
I created implementation for this BADI Z_STATUS_CHANGE_IMP and in attributes in method i have given Z_STATUS_CHANGE .
But if i search in method in process type of action defination i could not see the method.
Is the process i am following is right or wrong ?
If i miss any thing to do pl guide me .
Thanks in advance ,
Vijay Vorsu

CX_SY_MOVE_CAST_ERROR in SPROXY Class after creating fault messages in PI ?

Hi All,
We created a SOAP to Proxy synchronous scenario and everthing works fine.
Now we have created a fault message in PI and regenerated the proxy in ECC, after regenerating the proxy, if i debug the proxy from service registry, breakpoint gets triggered in proxy class and iam getting an exception "CX_SY_MOVE_CAST_ERROR" at the status bar (but not dump). After executing the proxy class i could get the required response in service registry but with the exception ( Connection IO Exception. Check nested exception for details. (Invalid SOAP Response. Runtime can not find return parameter <(http://hostname.com/soaptoproxy)MT_Soap_Response>.). In MONI i could see this as a successful message. Can anyone tell me reason for this exception both in proxy class and in Service registry ? I also regenerated the proxy class after creating fault message in PI.
Thanks,
Sivakumar.C

Hi,
Thanks. I have tested in locally in SPROXY and i found that exception occurs in the constructor method of exception class, which was created by adding Fault Messages in PI. Any Suggestions ?
Thanks,
Sivakumar.C
Edited by: kumar.sappi on Feb 6, 2012 12:19 PM
Edited by: kumar.sappi on Feb 6, 2012 1:49 PM

Attributes editable after creating Virtual Warehouse in RMS

Similar Messages

Maybe you are looking for