Attributes in the Infoset

Hello SDN,
I have a requirement to create an infoset on 0MATERIAL and another custom infoobject, say XXX. So, I have created the custom infoobject and added some other fields to XXX as attributes. While creating all other IOs(attr. to XXX) I have deselected the Master Data Options as I do not want the master data for them and also I have deselected the "Attributes Only" option to make the attr. to be used in the query.
However, when I am trying to create the query on the infoset, I am able to see all the attributes of 0MATERIAL but the attributes which I created for XXX are only appearing as display attributes to XXX and so I am unable to use them as normal Char. Am I missing something in the creation of attributes to make them useful in the query?
It is very urgent. I would appreciate if someone throw some light on it.
Thanks,
RPK.

Hello RPK,
How r u ?
If u have deselected the ATTRIBUTE ONLY then it should allow you to check them. Check again if the XXX is properly saved and activated. Update Tree and check.
It will ask for "ACTIVATE DEPENDENT INFOOBJECTS", select Yes or Tick Mark for that.
After this remove the object from the INFOSET and Insert it again and see.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Filtering attributes in the DFF

Hello Everyone,
In a selfservice page, I have enabled a DFF and i displayed 3 attributes of that DFF in the page and also enabled the LOV option for those fields. All the 3 fields show data from the same Value set.Now is there any way i enable restriction in those fields so that what ever value is selected in field A, the value should not be visible or should be disabled for the user to select in field b and c and vice versa ?
Thank you

Hello RPK,
How r u ?
If u have deselected the ATTRIBUTE ONLY then it should allow you to check them. Check again if the XXX is properly saved and activated. Update Tree and check.
It will ask for "ACTIVATE DEPENDENT INFOOBJECTS", select Yes or Tick Mark for that.
After this remove the object from the INFOSET and Insert it again and see.
Best Regards....
Sankar Kumar
+91 98403 47141

How to add a Navigational attribute to an infoset

Hi All,
I have an infoset for which i am trying to add a navigational attribute. For a multiprovider i could able to see the provision to add a navigational attribute whereas coming to an infoset i couldn't find any option to do so.
i tried using RSISET tcode to adjust the infoset but couldnt see them yet. Could someone please suggest me the possible solution for this issue.
Regards
Jitendra

Hi,
after turning on the Nav-attributes in ODS and adjust via RSISET, you will see the attributes when doubleclicking the infoset.
In Infoset maintenance find your ODS and scroll down the Object list.Can you find it in your Infoset ODS Characteristic list ?
It should appear as an unchecked checkbox.
tick it and reactivate the Infoset.
if this is still not working then go through this notes below
1082082
1164196
1158243.
But if you want to use attributes for navigation in an DSO, you could add the infoobject itself to the infoset and link it to your DSO.
Santosh

Error while generating the Infoset

Dear SD Experts,
I get the Error While Generating the Infoset.
I am actually trying to write a Query.
the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
below is the List.
1)Differences in field TEXT_VBAP_CHARG
2)Differences in field TEXT_VBEP_ETENR
3)Differences in field TEXT_VBEP_ETENE
4)Differences in field TEXT_VBEP_PLNUM
5)Differences in field TEXT_LIPS_CHARG
6)Differences in field TEXT_LIPS_LGPLA
Thanks in Advance.
Regards,
Santa Khattri.

Hi ,
From what you are saying, i am guessing there could be difference in field types used and in dictionary.
Try this.
1.Go to SQ02
2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
3. Select your Infoset.
4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
or Try this.
1. Select your infoset.
2. Change
3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
Thank you.
Regards,
Subin John.

Can i create more than one attributes for the custom class created using java API

Hello everyone,
I have been creating class and its attributes programatically using java APIs, I want to know that is there any way to create multipal attributs for the same class in just one call of API with all the options for each attributes,
thanks

You can create a new class and define all of the Attributes at the time the class is created - this is the preferred way of creating classes. Use the addAttributeDefinition() method on ClassObjectDefinition. If you need to add attributes to existing classes, you can only add them one at a time (using the addAttribute() method on ClassObject).
(dave)

Data issue with Navigational Attribute in the report

Hi Experts,
We have a report which has Material and Material Group in the report. Material Group is a navigational attribute of 0Material. We have some 31 material groups in the ODS. However, the report is diaplaying only 3 material Groups. If I use Material Group directly( not as an attribute of material) then it is displaying all the 31 material groups correctly.
We have a hierarchy which is loaded through Flat file on Material Group. We need the hierarchy to be displayed for all the material groups in the ODS. Please let me know what could be causing this issue?
Thanks and Regards,
Kavitha Jagannath

Hello Kavitha,
Check if the Material Masterdata is having these Material groups. If not then load this Material masterdata and activate it.
As your query is using Material group as Navigational attribute then the data should come from this Material Masterdata.
If your Material has only 3 of th eMat Groups then report will show only 3. Better update this Material masterdata.
Regards,
Pratap Sone

Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
<input type="file" name="file" accept="image/*" id="file" />
mimeTypes.rdf does not seem to allow this.

''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
<pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
For details, see
* [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

WCF :Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property

Hi All,
Currently I am working in a WCF project here when I try to send data from WCF Project 1 to WCF project 2 I am getting the below error.
The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://tempuri.org/:subscriber. The InnerException message was 'The use of type 'Integra.Business.ICC.ObjectChangeTracker'
as a get-only collection is not supported with NetDataContractSerializer. Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property.'. Please see InnerException
for more details.
I don't understand what issue this is since I am new to WCF. Please help me on this thanks in advance.

You've posted to a forum for Microsoft Project - a project management program. Please re-post your question to the WCF forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf
Sorry - I cannot seem to move your post for you.
Julie

Add a new field(from transparent table) to the infoset

Hi,
I need to add a new field to the existing infoset in HR. I found that field exist in the CSKS table. in the infoset they are using PNP logical database. As per my understaning i have to link the CSKS-KOSTL with P0001-KOSTL.
Could you tell me how to do this?
Please do the needful.
Thanks & Regards,
Krishna.

Hi,
I have added that KOSAR in the additional fields and i added the code for that like
clear kosar.
select single kosar
into kosar
from csks
where kokrs = p0001-kokrs
and kostl = p0001-kostl.
Is it will work now? One more help how to add this change to the transport?
Please do the needful.
Thanks & Regards,
Krishna.

CRM function module to update the attribute in the classification TAB of BP

Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PM

For material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi

Populating CRM marketing attributes using the APD

Hi Experts
We are having problems with populating CRM marketing attributes using the APD. When we run our process we get the error message:
CRMBW_ATTR_WRITE005: Error when processing function module CRMBW_UPDATE_BPMKT_5. Message no. RSAN_MDL024
As you can see, we are using the new function module CRMBW_UPDATE_BPMKT_5 since the old CRMBW_UPDATE_BPMKT did not work either.
Do we have to add a reference to a infoobject in transaction CRMBWTARGETS? We have not done this because the marketing attribute in CRM doesnt have decimals and all the objects in BI have. Could this be the cause of the error?
Kind regards
Erik

Hi Ramesh,
Thanks for quick reply.
I have already followed the procedure you have described. Since there is not common objects between ODS and Bpatner infoobject, i am not able to do mapping.
for eg. my ZBPARTNER infoobject has attributes like zfooty, ztennis and zrugby but my ODS has char name , char value, counter for multiple values infoobjects.
I am following the example in the demo content to work out the process but could not understand how the data is getting uploaded from ODS to Business partner.
http://help.sap.com/saphelp_nw70/helpdata/en/bf/5df63bf9deaf09e10000000a114084/frameset.htm
Thanks,
Sandeep Jogde

Marketing attribute in the text field, interactive script

Hello Gurus,
We are facing a problem in the interactive script, of the sap crm 7.0.
We know the possibility of set some of the customer data into the
script by filling bdc field inthe test field and then adding this text
field to a script question.
We did it in the customer data "***" by filling the bdc field with "ext
field marketing attribute interactive script" and this data is showed
in the script, but we can not show marketing attribute data in the
script by using text field and bdc field.
There is a possiblility of showing the marketing attribute in the text
field or it is imposible due the structure of bol in crm.
Thanks in advance.

Hello ,
To display or change the marketing attributes of a business partner in the script follow these steps:
1. Run the Interactive Script Editor.
2. Create a new Question and in the Answer Area drag and drop the "Marketing Attribute" dynamic answer.
3. Select the "Marketing attribute will display here when executing the script" object and go to tab "Dynamic Content Parameters".
4. Select the attribute set and the attribute name.
5. Save the question.
6. Drag and drop the question to your script.
7. Change the template of the question node to either "Person Marketing Attributes" or "Organization Marketing Attributes" depending on what type of business partner is expected to be confirmed at run time in the IC_AGENT role.
8 Save the script.
9. Run IC_AGENT or similar IC role.
10. Confirm an organization ( if you used "Organization Marketing Attributes" ).
11. Run the script.
When you reached the question maintained above, the marketing attributes will render for that business partner, if they exists or will be created if they don't exists . To be created a button that will do a navigation is required. It means that the question will have to be linked to a next question or to itself by this button (to itself is required only if it is the last or the only question in the script). To suggest to the user that he or she has to click on the button, to save, is probably better to name the button "Save".
Octavian

Display entity-attributes and global-attributes in the same screen

Hi,
I have a question about entity.
Is it possible to display in the same screen, entity-attributes and global-attributes?
thanks
Rosalia

Hi Rosalia,
You can only display attributes from the current entity and the entity or entities that it is contained by (the parent entities).
So if you had the following data model
Global
..the person
...the income
the person is contained by global.
the income is contained by the person (which is contained by global).
If you want to create a person-level question screen, you can display global attributes on that screen by using subsitution like %global_field_1%. You cannot, however, input global attributes on that screen (ONLY attributes belonging to the person)
If you want to create an income-level question screen, you can display attributes from the person such as "tell us about %person_name%'s income..." as well as global attributes. Again, you cannot input person or global attributes on that screen (ONLY attributes belonging to the income)
However it only works from child-to-parent containment relationships! You cannot have a global question screen which loops through the person instances and displays attributes from the person, or from the income out-of-the-box.
We have managed to implement this using custom controls.
You can map individual attributes back up to the parent level, and then display them,
such as
the first person's name = InstanceValueIf(the people, the person's name, the person's id = 1)
the first person's name is now a global attribute and can be displayed on global question screens.
Hope this helps!
Ben

Data type of the base attribute or the base value does not match...

...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
Michael

Technically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
    SQLDataType="NUMBER(12,2)"
    ETMeasureColumnName="REGISTRATIONS"
    Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template.

Attributes in the Infoset

Similar Messages

Maybe you are looking for