Attributes & Navigation attributes

Hi experts,
I want to know why do we use attributes and navigation attributes in demand planning?
Please explain with some example.
Regards,
Umesh

Hi Umesh,
Please check below 2 links and
if you have any further question , please let us know .
Manish
Attributes & Navigation attributes
http://help.sap.com/saphelp_scm50/helpdata/en/80/1a63e7e07211d2acb80000e829fbfe/content.htm

Similar Messages

Unable to view Navigational Attributes in ODS

Dear All,
We have enabled Material Group as Navigational Attribute in Material. Material has been included in ODS as Key Field. In ODS also Material Group is switched as Nav Attr. Now when I check in Reports I am getting # for all Material Groups. I checked in ListCube. Here also I am getting # values.
I did master Data Activation and also did Attribute change run. Where as I am able to view values for Material Group in Material Master Data.
Regards
Ravi Y

Hi Ravi,
You could check if the X/Y table of material group are correct.
Do RSRV combination check on the info object material and material group. Run all the tests...espeially the consistency of X and Y tables..
Also, you could probably check if this is some authorization issue... that you dont have authorization to view contents of material group...(may not be the case, but worth a check )...
Sounds strange though, if all is ok and u still dont see material group. (and sometimes it cud be a refresh issue as lalit suggests....., if it has to get wierd )
Hope it helps,
Regards,
Sunmit.

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

Navigational attribute in Cube

Hi Gurus,
I want to understand one point before I am going to perform a small enhancement.
I need to set a navigational attribute in a cube(before it is not checked on "I/O") meaning make this navigational attribute behave as a char., but this cube contains data already, my question is :
can I make this change ? if yes any other additional effort?
Thanks in advance

Hi Ryan,
The attr needs to be marked and activated as Navigational Attr in the parent char first. Then you can mark it as nav attr in the cube (which contains the parent char). Does not matter if the cube contains data...you can do this activity in a cube with data. Remember to reactivate the cube's update rules and any multiproviders that it is a part of after you make this change.
Hope this helps...

Adding navigational attributes to a cube

We have upgraded to BW 7.3. Previously when we added navigational attributes to a cube we need to activate the update rules from the ods but now it appears that we don't need to do that anymore. Is this the expected behavaior? We are using the 3.5 update rules.
thanks

HI,
If you are using 3.5, after selecting nav attr in the cube, the cube structure gets deactivated. The dependent update rules also gets deactivated. You will be forced to activate all again.
In BW 7.3, SAP would have given privilege to add without activation. It is good for us. So nothing to worry.
Regards,
Suman

Code needed for a Navigational Attribute.

Hi Experts,
I have a requirement to update records on a Navigational Attribute of an Infobject in an DSO.
DSO A has key figures Region & 0calmonth. Data fields Price, Quantity, Place & Name. DSO B has key figures 0customer & Data Filelds Plant, Material etc. DSO B Plant's Navigational Attribute is Region /BI0/OIREGION.
Now, I want to link the Region of DSO A with the Navigational Attribute of DSO B with Region /BI0/OIREGION and update the values of DSO A in DSO B.
For this I want to write a code in the END ROUTINE. Please provide me with the code.
Thanks in advance,
With Kind Regards,
Kannan Jagadeesan.

Hi,
data : begin of itab1 OCCURS 0,
         Region type /BI0/OIREGION-Region,
         OBJVERS type RSOBJVERS,
         calmonth type /BI0/OICALMONTH- calmonth
        END OF itab1.
select * from /bic/DSOaa00 into table itab1    * this is DSO A*
for all entries in DATA_PACKAGE
where /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION..
loop at DATA_PACKAGE.
    select /BI0/OIREGION
        /BI0/OICALMONTH
   from /bic/DSOaa00
   into TABLE itab1
   where /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION
    If sy-subrc = 0.
      sort itab.
    endif.
    read table itab with key /BI0/OIREGION = DATA_PACKAGE-/BI0/OIREGION.
    if sy-subrc = 0.
      /BI0/OIREGION = ITAB1-Region.
      endif.
this is the dry draft to read the oregion navigational object.
try to correct accordingly in your system and implement it.
hope this helps you
santosh
Edited by: Santhosh Nagaraj on Sep 16, 2009 2:01 PM
Edited by: Santhosh Nagaraj on Sep 16, 2009 2:05 PM

BI-IP / Formula navigation attribute

Hi,
i have the following problem and hope somebody can help.
I have a BI-IP planing function (Fox-Formula) which simply copies the keyfigure Amount from the characteristic company (#) to the characteristic company (8703).
{ KI_LCCUR, 8703 } = { KI_LCCUR,# }.
this characterisic has also a navigation attribute headquarter.
when i run the function the following error message appears:
8703,# is invalid: Valid is 8703,DE. Characteristic "ZCompany"
which means to me the master data for charactersitic company 8703 and its attribute Headquarter # is not valid, which is true. But what do i need to do in order to use the right combination 8703,DE?
Is there a way to make fox formula to find the right value for the attribute? is there a way use navigation attribute in fox formule?
Thanks for your help in advance!
Mike

Hi,
The problem can be due to the mapping in the cube.
Please reactivate your cube.
If you are using a multi-provider, then please check that the navigational attribute is defined in all the cubes in mulitprovider.
Regards,
Amit

How to show data for navigational attribute in a report ?

Hello all,
I have a hierarchy info object A which has a navigational attribute(hierarchy) B. I need to filter on B for a particular node.
I have added A in the filter column and selected B as the attribute. How can i restrict B for a particular hierarchy node ?
Any help will be appreciated.
Thanks in advance
S N

Hi,
Have you defined 'B' as Navigational attribute at InfoProvider Level?
You can Restrict B for a Particular Value once it is defined as Navigational attribute at InfoProvder level.
Go to InfoProvider maintaince>click 'nav attributes'>enable it (check the box).activate the InfoProvider.
Then you can see it under same dimension where 'A' is assigned and its name would be A_B.
Drag and drop in to rows and restrict(include/exclude) with required value.
thanks
Message was edited by:
Murali

Virtual infoprovider with services - Navigational attributes

Hi all,
I have a basic cube in BI system- X , and created a virtual cube in another BI system Y with services to read data from basic cube of BI system X . In BI system Y we built a report on virtual cube. This report (on virtual cube in BI system Y) is using a characteristics say Product group ( which is a navigational attributes of prodect in BI system X).
DataFlow is as under:
Basic cube in BI system X:
Product
Year
Amount
and Product group is switched on as navigational attributes in this basic cube.
Virtual cube in BI system Y:
Product group
Year
Amount
Report in BI system Y:
Product group in rows
Amount in column
This report is not working.
If I do the the following changes as follows then it works:
1.Use Product instead of product group in report
2. Switch off navigational attributes in basic cube.
We are in BW 3.5 and navigational attributes option is ticked on for virtual cube.
In summary, If I do not use navigational attributes in report and switch off navigational attributes from basic cube then report shows data.
Could you please help me to figure out the issue.
Thanks,
Harry

Thanks Naga,
Yes, I tried adding product in virtual cube as well but it did not work. Secondly, we do not want to add product in virtual cube because of data aggregation.
Most strange thing is that, once we switch on any navigational attributes on basic cube, function module stop working (paasing any data to virtual cube report). report says no appropriate data found. We are using sap standard function module "RSDRI_INFOPROV_READ_RFC". I debegged this code and no data in internal tables.
If we switch off all navigational attributes from basic/source cube this function module provide data to internal tables in code.
Why function module is behaving like that.
You guys experience/support/any clue will be appreciated highly.
Thanks,
Harry

How to see Navigation attribute in Report

Hi ,
I am working on BI7.0.
In my Query , material is a characteristic which has 3-4 Navigation attributes. But when I execute the report , I can only see Material data displayed (because only material is in the rows). I also want to see data of its attributes in report results. I dont have authorisation to change the query.
Also I am unable to open the Query in Local view (some connectivity issues).
Can you please suggest How I can drill-down those attributes.??
Also these attributes are not visible in free characteristics.
Thanks,
Su

Hi there,
To use the navegational attributes with drill down, they have to be available in either rows, columns or free characterisitic.
For that you have to edit the query. There's no other way.
But each navegational attribute is also a display attribute.
Therefore, you can after executing the query, right-click over material and select properties. You'll see a tab named attributes where you can add the avilable attributes to the left (so they will be displayed), and change the settings of each one of them (see only key, key and text, etc.), but you can't filter by any of those attributes, or do any drill down options over them. They are only display attributes.
Hope this helps.
Diogo.

Need help on Authorization on Navigational Attribute.

Hi All,
I am working on Authorizations.
I am using the info Object "Material group" which is the Navigational Attribute of 0MATERIAL.
In Reporting, I have created the Authorization Variable for Material group.
And after this, i have created the Authorization Object in RSECADMIN and added the info Object "Material group" and harded coded the value as "1000". After this, i have created the Authorization Role in PFCG and added this authorization Object over there.And this role is assigned specific User.
While Running the report on specific User, for Material group, filteration is not happening over there (Material group = 1000). It is showing all values for this user.
Can you please help on this issue.
Thanks,
Shahina A

Thanks for your reply. I was on leave for the past 2 days. I have checked as you suggested.
In 0MATERIAL, 0MATL_GROUP is the attribute and i have made Authorization Relvent for this Attribute.
And i activated the Info object 0MATERIAL.
Then i have run the query in RSRT and found an error while running the Report.
Can u pls help on this issue.
Diagnosis
The system determined the authorized characteristic values for the characteristic 0MATERIAL__0MATL_GROUP. It determined that you do not have the (analysis) authorization to view transaction data for any characteristic values or range.
System Response
If this situation occurs when a variable is being filled, the query cannot be executed.
Procedure
You must have authorization for at least one characteristic value for the characteristic 0MATERIAL__0MATL_GROUP.
Create the appropriate analysis authorizations for the user.
If you are only authorized for evaluations that aggregate using the characteristic 0MATERIAL__0MATL_GROUP (for ":" authorizations), use a query without this characteristic. If the characteristic is not used as a filter or in the drilldown, variables should not be used.
Procedure for System Administration
Notification Number EYE 018
Thanks,
Shahina A

# values for navigational attributes in report . (Urgent)

Hi Gurus,
I have a navigational attributes for time dependent master data. In the report I am not able to see values for that navigational attribute. I see # values for the navigational attributes. I checked the master data of main info-object. every thing looks fine.
please help me in regarding this.
thanks,
Regards,
Aarthi

Check the following two things again just to make sure you are doing everything right. These are already mentioned by Bhanu...
1) Go to the master data table (Q table or the M table) and check to see if there are M version records (OBJVERS = M). If yes, you need to activate the master data using the program RSDDS_AGGREGATES_MAINTAIN (Change Run). If there are no M version records then check the second step
2) If you do not enter any key date in the query, it takes the system date as the default key date. So check and see if any master data exists for today's date ?
Also just curious, which version and support pack level are you on ?

How to Get Navigational attributes of dso in Report ...

Hi i have a dso with many fields ,
In the report i need to get some navgational attributes which are in dso..
How to Get Navigational attributes of dso in Report ..??
Thanks All..

hai naiduz,
in the dso u find folder with navigational attributes, there select the Navigation check box the fields which u need in the report.
and further if ur dso through multiprovider and also identify them at multi provider level.
then u will be able to see the fields at query designer level, then u can use the nav. fields u need in the report.
regards,
Vj

Data issue with Navigational Attribute in the report

Hi Experts,
We have a report which has Material and Material Group in the report. Material Group is a navigational attribute of 0Material. We have some 31 material groups in the ODS. However, the report is diaplaying only 3 material Groups. If I use Material Group directly( not as an attribute of material) then it is displaying all the 31 material groups correctly.
We have a hierarchy which is loaded through Flat file on Material Group. We need the hierarchy to be displayed for all the material groups in the ODS. Please let me know what could be causing this issue?
Thanks and Regards,
Kavitha Jagannath

Hello Kavitha,
Check if the Material Masterdata is having these Material groups. If not then load this Material masterdata and activate it.
As your query is using Material group as Navigational attribute then the data should come from this Material Masterdata.
If your Material has only 3 of th eMat Groups then report will show only 3. Better update this Material masterdata.
Regards,
Pratap Sone

Poor Performance with Webi on top of BW - Large Navigational Attributes

We have recently developed a reporting model based on having a BW cube of approx 20 million records. This has 2 very large line item dimensions (one 14 million records, on 6 million records) that both have navigational attributes stored against them.
We need the design to be like this because the attributes change monthly and we do not wish to do a complete drop and reload of cube data each month (this takes 10-12 hours).
When we build a Universe on top of the cube and try Webi reporting the performance is dreadful - many reports time out completely. This happens whether or not the large line item dimensions are selected in the query. The BW query is very simple just 2 key figures and approx 30 Navigational Attributes as default values. No filters are applied.
For example a query that just contains Calander Year and one key figure either times out after 10 minutes or fails.
Our source of the data is Oracle tables and the same query runs in 2 1/2 minutes and the query runs in RSRT in approx 5 minutes with no problems so it is definately a problem with BOBJ to MDX to BW.
We are on BW7.01 SP5 and XI3.1 SP2. SAP have recommend going to SP3 and using query stripping to help with this but I doubt if this will work.
We have tried building aggregates, splitting into yearly cubes etc but nothing seems to help.
My question is do the large navigational attributes mean Webi simply can't cope with this?
Thanks

Thanks for the suggestions.
Although this did not directly help I've now found a solution.
We had a calculated key figure in the query that doing a count of records on a huge navigational attribute. This was causing all queries to run very slowly (even if the key figure wasn't selected in Webi).
Removing it solved the problem. Will have to find another way to do the count key figure.
Thanks

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

Attributes & Navigation attributes

Similar Messages

Maybe you are looking for