Attributes not listed for Adm

The issue is where the values for attributes (ex. Cost Centers) are not listed for the Administrator.  The Attribute section is located in 2 sections:  Manage Employee Data and Edit Attributes.
We added a note 910076 a couple of days back in DEV, which removed the ‘Add New Line’ button. 
Any suggestions and fix are welcome.
Points will be rewarded amfully.
Cheers,
Lokesh.

Hi Lokesh,
Check the Adm attributes in the org structure and make sure correct backend system is in the attributes.
Thank you

Similar Messages

  • Material not listed for destination country

    Hi Gurus,
    i have an error when i create a Sales Order...
    "Material TEST not listed for destination country US"
    Can anyone help me to fix this error?
    regards
    Kumara

    Hi Kumaran...
    This is clearly the case of Material listing....
    This is happening just because for that particular customer/Country  you might have made the configuration through material determination that, he can order materials only which is listed to him.
    In other words, That customer/Country  can only order the materials which is in the list created by you through material determination.
    If you desire to add this material to the list... go to Tcode VBO1 (its 'o1" not 'zero 1') and select the type as A001 (Listing). Just check weather the material is listed there.. if not.. add the material to the list.
    Hope this help.. Reward if this is informative...
    Thanks,
    Safeer Rahman

  • My country is Kuwait not listed for FaceTime and iMessage for activation?

    my country is Kuwait not listed for FaceTime and iMessage for activation so how can i use it ??

    Sorry... But... This cannot be changed
    https://discussions.apple.com/message/15858866

  • New TMG 2010 servers are not listing for port 443

    Experts,
    We have installed New TMG 2010 servers are not listing for port 443, we have 2 servers installed in same subnet. server can telnet at port 443 to self but can not do to each other.
    Do we need to create any access rule in TMG to allow this ?. Please help.
    Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com

    Hi,
    Please check the blog that lists the ports used by TMG.
    Forefront TMG 2010 Protocols and Ports Reference
    http://tmgblog.richardhicks.com/2012/09/10/forefront-tmg-2010-protocols-and-ports-reference/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does
    not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • ACS 5.5 Radius Attribute not listed in Radius Directory

                       Hello Community,
    iam on the evaluation on Cisco ACS 5.5, and iam trying some scenarios for my company.
    I have to authenticate a ip phone . here i need one VLan tagged and one vlan untagged.
    In the authorization profile u can add the Radius Attributes, we got hp switches and i need the attribute  with the ID-56, but this ID ist not listed in the Authorization Profiles--> Radius Attributes-->select Part.
    But it is listed under system-administration->Configuration-->dictionaries-->Protocols->Radius--> Radius IETF
    come somebody tell me how i can selct this Attributes under Authorization Profiles--> Radius Attributes-->select Part. ??
    Thanks a lot
    regards

    Hi
    As you are using HP switches, certain advanced use cases, such as those that involve posture assessment, profiling, and web authentication, are not consistently available with non-Cisco devices or may provide limited functionality, and are therefore not supported with non-Cisco devices.
    For more information regarding Authorization profile configuration, please go through the following link:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/pol_elem.html

  • Profile value per_person_id is not listed for $PROFILE$ block

    Hi All,
    I have reqirement to retrive the person_id to default Employee number in Personal analysis descriptive flex filed segment.
    When i tried using $PROFILES$.PER_PERSON_ID or fnd_profile.value('PER_PERSON_ID') is not working for me.
    Then i have checked the profile value list using "diagnostic-->examin" option in the application where i am not able to find the Per_person_id in the list.
    Note: We are using the Oracle Applications : 11.5.9
    Is there any way to meet my reqirement?
    Appriciate your contribution towards this issue.
    Thanks in advance.
    Kumar
    Edited by: Kumar Kasinathan on 04-Jul-2012 00:07
    Edited by: Kumar Kasinathan on 04-Jul-2012 00:14
    Edited by: Kumar Kasinathan on 04-Jul-2012 00:16

    Hi, I need to attach a value set to attribute12 which should not be the employee number, attribute12 of per_all_people_f and employee_number of a custom table and the number for the attribute12 should be the unique value.
    The steps i have followed
    1. created a table file_number to hold the numbers from 0000001....to...9999999
    2. created a view-file_number_v to have unique numbers as
    SELECT fn.file_number
    FROM file_number fn
    WHERE NOT EXISTS (SELECT 1
    FROM per_all_people_f pap1
    WHERE pap1.employee_number = fn.file_number)
    AND NOT EXISTS (SELECT 1
    FROM per_all_people_f pap2
    WHERE pap2.attribute12 = fn.file_number)
    AND NOT EXISTS (SELECT 1
    FROM table1 t1
    WHERE t1.employee_number = fn.file_number)
    3. Created a table validated value set based on the above view and attached it to the Attribute12 of the DFF
    Its worked fine for new inputs, but when ever i try to requery the employee,hence the number is inserted in the attribute12 column of per_all_people_f table the value set validates and provides error message.
    To avoid this i have used the following temp table query,
    (select file_number fn from file_number_v
    union all
    select attribute12 fn from per_all_people_f where attribute12 = :PERSON.ATTRIBUTE12:NULL) temp
    I have used the above query as table in the valueset.
    Now i have to get the person_id to use it on the above query to avoid the issue which i have mentioned in previous discussion.

  • My playlist is not listed for device synch

    I have a playlist on the left side of my iTunes schreen wil several audio items in it. However, when I click on my iPhone Sync Music section, the playlist is not listed. My other playlists are there. Any ideas why it is missing, and will not sycn with my iPhone?

    Hi,
    In your contacts list (Address Book) your Contacts (for iMessages) should list either and Apple ID or their Phone Number complete with international Dailling code.
    In the UK I contact my iPhone by it's number that starts +44
    (or I use the Apple ID I use in Messages Beta  and set the Settings > Messages > Received At / Caller ID to the Apple ID)
    FaceTime on the Mac (Included with Lion) works using an Apple ID
    On the iPhone it tends to work with the Phone Number
    9:34 PM      Tuesday; May 1, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My country is not listed for any downloads - zambia

    Zambia is not listed on my iPad. How do have access as most of the downloads require me to key in my country

    Hi,
    In your contacts list (Address Book) your Contacts (for iMessages) should list either and Apple ID or their Phone Number complete with international Dailling code.
    In the UK I contact my iPhone by it's number that starts +44
    (or I use the Apple ID I use in Messages Beta  and set the Settings > Messages > Received At / Caller ID to the Apple ID)
    FaceTime on the Mac (Included with Lion) works using an Apple ID
    On the iPhone it tends to work with the Phone Number
    9:34 PM      Tuesday; May 1, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Issue regarding 0MATERIAL_ATTR  - Attribute not Updated for Some Materials

    Hi All,
    As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
    After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
    After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
    I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
    I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
    I had also activated master data by running Attribute change run but still problem persist.
    Please help.
    Regards,
    Divyesh Khambhati

    Hi Venkatesh,
    I had write code in CMOD for MRP controller.
    As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
    if I take one example..
    For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
    Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
    I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
    please help.
    regards,
    Divyesh Khambhati

  • Drivers not listed for Tecra A3 (PTA30A)

    I followed the logical structure of the website and went through this link:
    http://www.isd.toshiba.com.au/drivers
    Drilled down to find only 13 drivers listed most of which are for windows 2000 (fat lot of use these days). However most of the drivers i.e chipset, audio, card reader etc... are not listed? Where am i suppose to get these files from?

    Hello
    Jaba is right, search on the Toshiba European website. There you will get the most drivers.
    Normally the Tecra A3 (PTA30A) is an Australian model but I have checked the Australian website and there I cant find all drivers for this model. :(
    http://www.isd.toshiba.com.au
    Greets

  • Muse not listed for download

    I'm trying to download a trial of Muse CC, but it isn't listed under the available apps on my CC Installer. I currently run Mavericks on my MacBook Pro. Please help

    Applications are normally not listed if the machine is determined to not meet the system requirements.  Check the system requirements to see if your system does not meet them.
    System requirements | Muse

  • Podcast not listed for download why?

    My podcast was accepted earlier today and I can find it in search, but there are no epidoes listed.  There is only a subcribe button under the podcast image.  Why is this?  Was itunes unable to download the episode from my site?  Any thoughts would be greatly appreciated.

    Hello Mr. Wilmut,
    Thank you for your insight into the podcast dilema.  I wanted to chime in here and ask if you think that the issue applies to me as well.  I have been subscribed to a podcast for some time now and the "show" is up to episode #35.  All 34 episodes faithfully download or present themsalves for download upon running iTunes on my pc.  Last night when I tried to bring in the latest podcast, #35, I was surprised to see that iTunes did not automatically download it so I tried the refresh button a few times to no avail.  The action produces no response as if there were nothing available for download but I know that is not the case.  Oddly enough when I use the following link I can "play" the podcast via my local copy of iTunes.  Here is the link:
    http://pipesmagazine.com/blog/radio-talk-show/the-pipes-magazine-radio-show-epis ode-35/
    Do you think this is related to what you had mentioned about Apple having an issue as per Mr. Walch's information?  I must say that this has only happened after the latest iTunes update but that could purley be coincidence.
    What do you think, I would please ask you to let me know your thoughts.
    Thanks,
    Lou

  • Some attributes not working for tableView.

    Hi All,
    Below is the code of my tableView:
    <htmlb:tableView id              = "material"
                                     headerText      = "Materials"
                                     headerVisible   = "true"
                                     design          = "alternating"
                               filterButtonTooltip   = "Use this row to filter and find materials"
                               filterButtonText      = "Filter"
                                     visibleRowCount = "5"
                                     fillUpEmptyRows = "true"
                                     onRowSelection  = "MyEventRowSelection"
                                     selectionMode   = "MULTILINEEDIT"
                                     width           = "950"
                                     filter          = "SERVER"
                                     emptyTableText  = "No items found for specified search criterion"
                                     iterator        = "<%= iterator %>"
                                     table           = "<%= itab_materials %>" />
    But the three attributes filterButtonTooltip  , filterButtonText and  emptyTableText does not seem to work.
    No text is displayedif the TV  is empty , neither filterButtonText and filetrButtonTooltip are visible..
    Any ideas?
    Regards,
    Anubhav.
    Edited by: Anubhav Jain on Nov 13, 2008 5:01 AM

    Hi All,
    Solved it..
    DATA: find type string value `src="/sap/public/bc/ur/Design2002/themes/sap_tradeshow/common/saptable/ico12_filter.gif"`,
              replace type string value `src="/sap/public/bc/ur/Design2002/themes/sap_tradeshow/common/saptable/ico12_filter.gif" alt="You can use this row as a filter"`.
    <htmlb:gridLayoutCell columnIndex = "1"
                                        rowIndex    = "1" >
                         <bsp:findAndReplace find    = "<%= find %>"
                                            replace  = "<%= replace %>" >
                    <htmlb:tableView id              = "service"
                                     headerText      = "Services"
                                     headerVisible   = "true"
                                     design          = "alternating"
                                     visibleRowCount = "5"
                                     fillUpEmptyRows = "true"
                                     onRowSelection  = "MyEventRowSelection"
                                     selectionMode   = "MULTILINEEDIT"
                                     width           = "950"
                                     filter          = "SERVER"
                                     iterator        = "<%= iterator %>"
                                     table           = "<%= gt_materials %>" />
    </bsp:findAndReplace>
                  </htmlb:gridLayoutCell>
    Regards,
    Anubhav
    Edited by: Anubhav Jain on Jan 23, 2009 11:52 AM

  • LastLogonTimeStamp Attribute Not Updated for Computer Account Over SSL-VPN

    We like to use LastLogonTimeStamp (LLTS) to find stale computer accounts, disable them, and eventually delete time.  What we have found is that domain member computers that connect to the domain exclusively by SSL-VPN (for instance in the case of employees
    who work from their home office) do not update LLTS.  Consequently these computers frequently appear on stale computer reports.
    I suppose the required logon type is never used when connecting over SSL-VPN.  Therefore I would like to know if there is a way via a logon script or some other method that we can update this attribute.

    That is normal as you connect to VPN using locally cached credentials for the user and the computer accounts.
    My recommendation to track these computers is to have an agent that periodically report the computer status (Example: Using Microsoft Intune) or have a scheduled task that will run a script when the user is connected to VPN and register the computer name
    as active in a file that is hosted in a share.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Ontario Universities are not listed for CC, I selected Home School as advised but...

    How should I proceed?
    Context:
    I am a full-time student at an Ontario university.
    I registered for Creative Cloud for Teachers and Students.
    I could not find my university listed in Adobe's database.
    Adobe recognizes this technical error and their official advice is to select Home School.
    I selected Home School.
    But I would like to submit evidence that I am a full-time student at a Canadian University.
    I don't want to wake up one day and find that Adobe has disqualified me from the Teachers and Students rate.

    I have requested that Ontario University be added.

Maybe you are looking for