Attributes Not Working in Smart View

Hi All,
I have an ASO database that has attributes on the Cost Center dimension. In EPMA and in EAS, the attributes are correctly shown. When I pull data in Smart View for a specific cost center, I see data. When I apply the correct attribute, the data comes back as "N/A". I know for a fact that this cost center IS tagged as the attribute I am pulling, but it will not show in Smart View as belonging to that attribute. I am using version 11.1.2.3 and Smart View version 11.1.2.3.000 (Build 157).
Any thoughts?

Hello,
this is indeed strange. Not a real answer, but here are some suggestions to get more details:
Case sensitive?
What was the attribute of this cost center before?
Try a report on this cost center with all attributes. Does one work?
Try a different front end tool.
From EPMA do a full deploy (make sure you have saved you essbase objects to a save location)
Does it work?
Change the Attribute and deploy it again. Does it work?
If you found it, please update this here, so others will be able to find the solution.
Regards,
Philip Hulsebosch

Similar Messages

Hyperion Strategic Finace are not listed under Smart View Shared Connections (EPMS 11.1.2.3)

Dears,
I'm can't access Hyperion Strategic Finance trhough SmartView because are not listed under Smart View Shared Connections.
But if I try connect trhough Private Connections it's work fine.
I've tried reconfigure Providers Services, but didn't work.
Anyone could help me?
Thanks in advance

It should be possible using a Shared connection to Strategic Finance as it is documented - Creating a connection using Shared Connections , as far as I am aware it is only OBIEE where you have to use the XML method.
It might be worth checking in workspace under workspace settings and enabled products to see if Strategic Finance is enabled.
Cheers
John
http://john-goodwin.blogspot.com/

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

Input textbox not working in Fullscreen view

Hi,
I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
Please let me know how do enter the text in input textbox in fullscreen mode.
Note: input textbox not work in fullscreen mode.
Thanks
Suresh

Hello,
I think your problem is very similiar to a problem that I had been suffering from a few days ago.
I think that the below code should solve your problem:
stage.scaleMode = StageScaleMode.NO_BORDER;
Chinmaya

Infopath systemuser() method is not working in infopath view @extrant site .

We have a sharepoint webapplication with infopath views .We have controlled the switch view with authenticating login use id .It is working perfectly in intranet.
When we are publishing the site to internet using public ip @ that time initially infopath forms were not opening so i have used Alternate access mapping and published the infopath forms in ip instead of server name .
Now infopath forms are getting opened but system user() rule is not working and infopath edit forms are not working .Even list view web part with assigned to filtration is also not working .
I am stuck on the issue since Monday . Please suggest how to make it possible . it is very urgent.
We want our customer to access using ad authentication.

Jeeva,
Did you create this form in InfoPath itself or you are modifying a list into InfoPath?
The first screenshot shows you have selected Total "is not equal to" Jan+Feb….
You can simply add Total field with “TextBox” and double click on it and select default value button.
Once it will open up a pop up select “fx” button in value and insert all fields like, Jan, Feb…and then put a “+” sign in between
This will auto populate value once you enter it into any of the month filed.
Also it you have copied fields for several month in InfoPath it won’t work. You have to insert each field separately
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Airport express not working with smart bro

My apple express is not working with smart bro.
What to do????

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Ad hoc analysis not available in Smart View Panel after connect with LDAP

Hi everyone,
Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
Product:
Hyperion 11.1.2.2 (Essbase, Shared Services)
log: appserver.log:
[2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
        at java.lang.reflect.Method.invoke(Method.java:611)
        at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
        at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
        at org.apache.commons.digester.Rule.end(Rule.java:253)
        at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
        at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
        at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
        at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
        at org.apache.commons.digester.Digester.parse(Digester.java:1785)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(AccessController.java:310)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
        at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
        at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
        at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
        at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
        at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
        at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
        at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
        at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
        at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
        at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
        at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
        at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
        at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
        at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
        at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.lang.J9VMInternals.verifyImpl(Native Method)
        at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
        at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
        at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
        at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
        at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
        at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
        at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
        at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
        at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
        at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
        ... 57 more
Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
        at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
        at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
        at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        ... 73 more
Thanks in advance

Hi everyone,
Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
Product:
Hyperion 11.1.2.2 (Essbase, Shared Services)
log: appserver.log:
[2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
        at java.lang.reflect.Method.invoke(Method.java:611)
        at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
        at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
        at org.apache.commons.digester.Rule.end(Rule.java:253)
        at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
        at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
        at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
        at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
        at org.apache.commons.digester.Digester.parse(Digester.java:1785)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(AccessController.java:310)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
        at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
        at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
        at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
        at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
        at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
        at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
        at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
        at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
        at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
        at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
        at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
        at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
        at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
        at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
        at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.lang.J9VMInternals.verifyImpl(Native Method)
        at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
        at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
        at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
        at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
        at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
        at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
        at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
        at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
        at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
        at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
        ... 57 more
Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
        at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
        at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
        at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        ... 73 more
Thanks in advance

Thunderbolt to VGA Adapter not working with SMART board all of a sudden?

I was wondering if anyone had any suggestions on getting my classroom's (I'm student teaching) SMART board connected to my macbook pro (13 in). Two days ago I tested the setup I had, Mini-DVI to VGA adapter, Mac OS X SMART software suite and it worked flawlessly. Today I try the setup and although the SMART board recognizes my macbook via usb, the projector does not display anything. System preferences does not even recognize the projector as an external monitor. When I plug in my Mini-DVI to VGA adapter (already attached to the VGA cord from the SB) the screen flashes black and goes back to normal. Official work from SMART technologies is there is no supported adapters for connecting a macbook to a SB but I have seen numerous threads about this setup working and like I said it was previously working fine. Any suggestions on what to try next? I was thinking of dual booting to an older version of OS X. Thanks.
Specs:
MacBook Pro 13 in
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
10.9.1

If your laptop is not connected to power (i.e., plugged in to a wall), try plugging it in. It is not uncommon for a laptop to send the VGA signal out with less power when it is on battery power. I've seen this fix this problem, at least, dozens of times.
Try connecting the VGA cable to your adapter while the smart board display is on THEN plug the adapter in to your computer.
Also, try connecting the VGA+Adapter to your mac before booting it (or connect the macbook to the vga cable and then reboot the macbook). I've seen this work with macbooks using vga on projectors (or other external displays running through longer cables or crestron/extron/whatever switching equipment) many many times too.
If these fail, get your campus AV (or IT) people involved. We have often found that a damaged cable or long run needing amplification will work with some computers but not with others. It could be that the cable running from the smart board is somewhat sketchy.
Also, have you attempted to connect your macbook to any other display since starting to have the issue? A bad dongle (dp to vga adapter) isn't rare. I have a bad one sitting on my desk at this very moment.
One last thing you can try, this works for some:
Shut of the mac
Connect it to the smart board (i.e, connect the cables)
Turn on the mac and then close the lid
This *may* boot the computer on the external dispaly (smart board)
Open the lid before it comes to the login screen.
Hopefully one of these suggestions helps.

Key figure Attributes not working

Hi ALL,
We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are showing as output only and key figures which are for output only are showing as open for editing.
I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
Can any advice on this?
Sivarama

Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
I am not very clear what went right but working.
Sivarama

Buttons Not Working in Content Viewer v21

I create two simple buttons in my document that go to the Next or Previous state of my Multi-State object On-Click. When I test it out in my desktop Content View and click the mouse, the only thing that happens is the Conten Viewer menu comes up. I've tried using the On-Mousover command and that does not work either. What am I missing?

You need to use on release. In CS6 it’s on release or tap.
Bob

Apply Button not working in Report viewer web part in SP 2013

I have a SSRS report which gets values from SSAS cube, with more than 10 parameters defined in the report. All the parameters are multi-select parameters and the report is deployed in SharePoint 2013 integrated mode.
I created a web page and integrated the SSRS report inside a report viewer web part. All the report parameters are from Performance Point filters. All the PPS filters are connected to SSRS report.
The problem is each and every time the parameter is re-selected(changed) the whole page gets refreshed.
So I added a Apply button, so that the report gets refreshed only after clicking the Apply button. Even after adding the apply button the report gets refreshed on each parameter change.
Can you please let me know why the apply button is not working and possible solutions to overcome this.

Hi,
There's no much similar issues I have found.
I suggest you consider opening a support case with us, provided the sample code for reproduce and version of SQL Servr. You may visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone.

MDX not working in Power View on sharepoint 2013

I have this MDX statement below that should be able to dynamically give me a % of total for any dimension. IN power View (sharepoint 2013)
I am getting an error. It works in Excel and works in the AS browser but will not seem to work in power view. Any ideas on how to rewrite it so that it may work. I am surprised I cannot find anything on this online about this issue.
When you highlight the "#ERROR!" in Power view it gives a long description of
"The Axis Function was indirectly referenced from the context of a statement other than SELECT. Evaluations of Expressions involving this function succeed only
when indirectly triggered by a SELECT statement".
CREATEMEMBERCURRENTCUBE.MEASURES.[Percent
of Total] AS
//Used to get % from total
IIF([Measures].[Total Count] = 0,
NULL,
IIF(isempty( ([Measures].[Total Count],
Axis(1)(0)(Axis(1)(0).Count-
1).Dimension.CurrentMember.Parent
)), 1,
[Measures].[Total Count] / ([Measures].[Total Count],
Axis(1)(0)(
Axis(1)(0).Count-
1 ).Dimension.CurrentMember.Parent))),
FORMAT_STRING="#,##0.00
%;-#,##0.00 %";

Hey Mike, Thank you very much for the answer. Just need a little more help please???
I have added two separate MDX statements that should get the individual % for these two separate dimensions.
1. First does it look correct from what your saying individually. Would you write it different?
2. Next can you show me the MDX that would combine them into 1 measure. Once I can see how these two get combined into 1 measure I should be able to do this for the rest of the dimensions.
3. Will Power View ever allow Axis function? Just seems strange that it works in Excel Pivot but not in Power View.
WITH MEMBER [Measures].[Percent] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Status].[Status Name].CurrentMember.Level Is [Status].[Status Name].[(All)] Then 1
Else ( [Status].[Status Name].CurrentMember, [Measures].[Total Count] )
/ ( [Status].[Status Name].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent] } ON COLUMNS,
{ [Status].[Status Name].[Status Name]} ON ROWS
FROM [Report]
WITH MEMBER [Measures].[Percent2] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Order Placed Date].[Order Placed Date].CurrentMember.Level Is [Order Placed Date].[Order Placed Date].[(All)] Then 1
Else ( [Order Placed Date].[Order Placed Date].CurrentMember, [Measures].[Total Count] )
/ ( [Order Placed Date].[Order Placed Date].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent2] } ON COLUMNS,
{ [Order Placed Date].[Order Placed Date].[Order Placed Year]} ON ROWS
FROM [Report]

Gmail Options button not working in standard view for Firefox 4

Since upgrading to Firefox 4 gmail does not work correctly in standard view. I can't select my username or options at the top right or select emails to delete or perform any actions on. I use IE and everything works fine. I tried restarting in safe mode and still same problem. I also cleared all recent history.

A little bit more detail... I am also having this issue, but I think it's more widespread than just google. My desktop is experiencing this issue (Vista x64) but my laptop isn't (Win 7 x64). Both are running Firefox 4.
Anyway: the problem seems to be with dynamic webpage content, javascript, html5, or something like that.
As amc-1 mentioned, the two buttons at the top right of google pages aren't doing anything in firefox 4.
In addition to the settings thing on google pages, in Facebook, if I type in a name into the search bar, suggestions pop up, but if I click on them, nothing happens.
In google maps, I can get it to open the directions section, but when I click "get directions," nothing happens there either.
I've tried starting in safe mode. Not working there either.
'''Edit''': I can confirm that this is fixed by creating a new profile. However, I would like to avoid this if at all possible.
Possibly relevant info from Troubleshooting Information in help menu: http://pastebin.com/uNUxsp2d

Interactive Heuristic not working in product view

Good morning,
I am trying to run a Heuristic in the Product view (sapapo/rrp3) and I get the following message:
'Stage number algorithm can not be run in the simulation version' but I am trying to run this in our active version, any ideas?
thanks in advance.

Good afternoon,
The Heuristic maintained in the product master is the SAP_PP_002 (Standard lot) which is working but if you go into the header menu and we run the heuristic that replicates our nightly run (this is a 2 step planning run with SAP_PP_020 = Stage numbering algorithm and then SAP_PP_002 = standard lots).
It fails at the first step saying that it can not be executed in the simulation version?
Could this refer to the nature of the process rather than a simulation planning version? I mean due to the process that the number staging algorithm works, may not work running in APO and simulating the results (due to the data is only firmed once saved).

Grand Total Not working on Materialized view based table ??

Hi all,
I have a complex report report by using sum and decode function. I precalculated my requirment in database and then create a materialized view based on my sql statement. I import this view in physical and BM model and its results very fine and efficient. But the problem create when I implement Grand Total on my report in table view it did'nt work means (Grand Total is not working on this MV based table) Any idea why ??
any reply would by higly appriciated.
Regards

Hi Zishan,
Check the Aggregation Rule and set it to sum in the table view.
That is go to the "edit formula" tab of the column for which you want grand total and set that to sum.
Hope this will help.
Thanks
Ashok

Attributes Not Working in Smart View

Similar Messages

Maybe you are looking for