Attributes of request do not match buffer attributes

Hi all,
I created a connector of the type 'SAP File Search' in the Enterprise Search Cockpit. But the connector cannot be setted to an active status and when i'm executing the consistency check i get the error message "Attributes of request xx, connector yy do not match buffer attributes".
Can someone give me some recommendation ?
Kind regards
Patricia Wolf

I haven't found an answer to this yet and wish I could give advice.
However, I'm looking for it. And if you find anything - we'd love to know.
I've got a very large progect - all the media was manually copied over (via the finder) to external lacie FW drives which were brought here to another satellite editing room. I recieve updated projects from the primary edit and relink the media - The audio files have tended to 'mismatch' when I reconnect the updates. And it appears this is increasing in frequency each time! (I relink to each new version of the project which is sent).
At this point it seems all the audio files bring up the same "File Attribute Mismatch" window. Only in certain sections of the sequence is the audio out of sync (to a variable degree +/- 5 to 7 frames).
This occours when I replicate the workflow on another machine.
This does NOT happen when I've sent the projects back to the original edit suite - which has the original media. The reconnection is fine.
So it appears this might be due to the media itself - and possibly when it was copied over.
But I can't yet figure out why this problem appears to be increasing, occouring with more audio files.
If anyone has any ideas to this - which sounds very similar to the original issue on this thread - we'd be obliged to reciprocate the help!
Cheers
G5 dual 2.3GHz power PC Mac OS X (10.4.6) FCP 5.0.4 / QT 7.1
12 G4 PowerBook (1Ghz) Mac OS X (10.4.1)

Similar Messages

Attribute member datatype is not matching in Essbase Studio

Hi All,
When I was trying to build the ASO cube by adding attributes it throwing below error
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1007083): Dimension build failed. Error code [-1]. Check the server log file and the dimension build error file for possible additional info.
\\Outline verification errors:
\\Attribute member datatype is not matching with Attribute dimensions datatype.
\\Illegal datatype for attribute member
\\Attribute member (Name) datatype is not matching with Attribute dimensions datatype.
\\Illegal datatype for attribute member Name
Here every thing is "String only" and i verified in backend it will show ing datatype as "Varchar".
Can someone assit me how to resolve this error.Thanks in Advance
Regards,
SatyaB

Did you tried CASTing your source data to match it attribute dimension type? Just CAST all source data before its loaded and it should help resolve any data mismatch type errors.
I think I have an integration where we use VARCHAR2 type data mapped to string dimension.

The RADIUS request did not match any configured connection request policy (CRP)

I setup NPS server and added a RADIUS Client access point, my project is to get a wireless user to authenticate using his/her AD credientials, my problem is i can't seem to authenticate my user
my NPS server is giving me this error log under Event Viewer > Server Logs > Network Policy and Access Services
    Reason:                The RADIUS request did not match any configured connection request policy (CRP).
but from my understanding i don't need to setup Connection Request Policies because i am using Network Policy
Please Help!

thanks for your reply, i setup a new NPS policy here is my error log
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
    Security ID:            NULL SID
    Account Name:            csdomain\rsingh
    Account Domain:            csdomain
    Fully Qualified Account Name:    csdomain\rsingh
Client Machine:
    Security ID:            NULL SID
    Account Name:            -
    Fully Qualified Account Name:    -
    OS-Version:            -
    Called Station Identifier:        0026.992f.6761
    Calling Station Identifier:        2477.0392.b0f8
NAS:
    NAS IPv4 Address:        192.50.2.2
    NAS IPv6 Address:        -
    NAS Identifier:            MYWAP
    NAS Port-Type:            Wireless - IEEE 802.11
    NAS Port:            35290
RADIUS Client:
    Client Friendly Name:        MYWAP
    Client IP Address:            192.50.2.2
Authentication Details:
    Connection Request Policy Name:    PEAP
    Network Policy Name:        -
    Authentication Provider:        Windows
    Authentication Server:        MYSERVER.csdomain.com
    Authentication Type:        EAP
    EAP Type:            -
    Account Session Identifier:        -
    Logging Results:            Accounting information was written to the local log file.
    Reason Code:            22
    Reason:                The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

ERR: This request does not match the context path for any installed web app

We are currently using weblogic 6.1 SP6 and facing "Error 404 Page not found" error very oftenly.
          This error is first encounter while uploading file at File folder, although does not happen at every upload, but was quite consistent always at upload file stage. At this moment, this error can occur at any stage, when ever we run any heavy process on the server (like importing large amount of data or pushing the data to different ERP - system by using custom integration. The system works fine after restarting.
          Please help me out to resolve this issue as this very critcal for our production environment.
          ERROR:
          ####<May 12, 2005 4:17:12 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:15 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:16 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:17 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:18 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          THANKS
          Rohit

Rohit
          How did you resolve the issue?
          I am facing the same.
          Thanks
          Amit

CreateAuthenticatedSessionToken: The signature of the request does not match the request parameters

I'm creating an app using the SODA Architecture.
I could successfully create an app and make the client to authorize it.
Result of newApplicationCreationInfo:
<?xml version="1.0" encoding="UTF-8"?>
<response>
<status>
<code>0</code>
</status>
<wc:info xmlns:wc="urn:com.microsoft.wc.methods.response.NewApplicationCreationInfo">
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<shared-secret>gBksYDAqcuAUXK+zyvfFW9F0sy8nchwnplJ6K7aKmAM=</shared-secret>
<app-token>AiAAANDl....A5b9fxVIlXEloouci6jGhY/A==</app-token>
</wc:info>
</response>
I'm using the app-token to build the redirect url, and I get to authorize the new app.
then, using the new child app id and the shared-secret I built the
CreateAuthenticatedSessionToken:
<?xml version="1.0" encoding="UTF-8"?>
<wc-request:request xmlns:wc-request="urn:com.microsoft.wc.request">
<header>
<method>CreateAuthenticatedSessionToken</method>
<method-version>2</method-version>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<language>en</language>
<country>US</country>
<msg-time>2013-01-01T00:00:00Z</msg-time>
<msg-ttl>1800</msg-ttl>
<version>2.0.0.0</version>
</header>
<info>
<auth-info>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<credential>
<appserver2>
<hmacSig algName="HMACSHA256">PcW4f9krD1O43O4JGBGEkqDlpatFIUUQY9JejHji0XA=</hmacSig>
<content>
<app-id>4417587e-46d1-49ee-a0fa-50dbfdcf932c</app-id>
<hmac>HMACSHA256</hmac>
<signing-time>2013-12-17T14:19:58.623Z</signing-time>
</content>
</appserver2>
</credential>
</auth-info>
</info>
</wc-request:request>
Being hmacSig value the encryption of "<content>....</content>" using shared-secret value as private key:
hmacSig = Encodingutil.base64Encode(Crypto.generateMac('hmacSHA256', Blob.valueOf(body), Blob.valueOf(sharedSecret)))
this returns an error code 11: The signature of the request does not match the request parameters.
I'm using the following endpoint: https://platform.healthvault-ppe.com/platform/wildcat.ashx
Also the redirection url I received after authorizing the app contains the following:
https://<MY_URL>/?gws_rd=cr&ei=h5ewUuKLJa7IsASc4YHIAw I'm not using this parameters, if that helps.
Any hint will be greatly appreciated.
UPDATE: I already checked the HMAC encoding using a third party service and it returned the same as my app

I figured this out (God bless Pair Programming):
I was signing incorrectly:
On the newApplicationCreationInfo:
My Shared Secret is : gBksYDAqcuAUXK+zyvfFW9F0sy8nchwnplJ6K7aKmAM=
But BEFORE hashing the "<content>...</content>" i need to decode my secret that is:
hmacsig = calculateHMAC256(content, sharedSecret.decodeBase64())

Media requested does not match media provided - BUT IT DOES?!

I'm trying to build an installer for my application. It requires NI-CAN and NI-DAQmx.
The installer requested to know the location of the install media for both packages. I downloaded the NI-CAN 14.0 installer, let the archive self-extract, and then pointed the application builder to the folder that NI-CAN 14.0 self-extracted to. It was happy with that.
I did the same thing with NI-DAQmx, but now I get this bizzare error message - bizzare because it claims the requested and provided media descriptions do not match, but they clearly do!
What is happening? How do I fix it?
The closest thing I could find searching in the knowledgebase was this link: http://digital.ni.com/public.nsf/allkb/830B0370F5314BF586257E0F0078884D.
However, that link said that the problem was different language packs - as far as I can tell, everything on my system is (and should be) english.
I downlaoded NI-DAQmx from this link: http://www.ni.com/download/ni-daqmx-14.0/4918/en/
I tried downloading the run-timeNI-DAQ instead, but it didn't like that either.
Thanks for any help you can provide.
Attachments:
Capture.GIF ‏25 KB

Greetings,
That is indeed a strange issue. I'd recommend trying different versions of those drivers, specifically starting with the most recent versions. It looks like a possible corruption in the driver.
Andy G
Applications Engineering
National Instruments

PSA Requests does not match.

Hi Experts,
There are 4 requests in my PSA table /BIC/B0000813000 but when i check in RSREQICODS I find only 1 request for the same PSA.
Can anyone explain me what could be the reason ?
All 4 requests are available in RSREQDONE table.
Moreover i m trying to delete my old PSA, when I run DB_GET_TABLE_SIZE func mod it gives me total size as (number of records in /BIC/B0000813000 * table width) but since RSREQICODS holds only 1 request I am able to delete only that one. (Tried both manual deletion as well as using process chain step).
Anyone know how do i delete other 3 requests ?
Note:- Other 3 requests are not available in RSA1-->PSA page (tried changing the date selection ).
Thanks in advance for the help.

maybe there is more then one PSA table. If you replicate and reactivate the system recreates a new PSA table. try searchin in s1-e11 with /BIC/B0000813*, and see how many tables you have...
M.

The key columns of the country measure group attribute do not match in either number or data types to the key columns of the source attribute

I have a country dimension which is used in 5 cubes. Now I want to change 'key column' property of the country attribute. Whenever I do this, I get an error as "The key columns of the country measure group attribute do not match in either number or
data types to the key columns of the source attribute". I dont understand what this error is about.
Can someone please help? Thanks in advance.
-Regards,
Raj Patil

sounds like you need to verify your dimensional usage tab to verify the relationships between dim and fact on the measure group.
Hi Talktorajpatil,
As Jon said, you can verify the relationships between dim and fact on the measure group on the dimensional usage tab. Use this section to define how you "join" your measure groups to your dimensions. There may be a Dimension-Measure Group relationship
that is defined using the wrong attributes and you'll need to select the correct attributes to link the Dimensions to the measure groups. Here are some similar thread for your reference.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/74203b66-8a71-4681-8e47-8f99cce87b3d/error-on-the-measure-group-which-do-not-match-the-data-type-of-the-key-column?forum=sqlanalysisservices
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2421058d-fd4a-44b8-8c7c-b0b349bbef2d/measure-group-attribute-key-column-does-not-match-source-attribute?forum=sqlanalysisservices
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Master Data Load - Number records not match

I am loading the 0PLANT table. In R3, it shows 966 records. After running the InfoPackage, there are 966 records in the PSA, none in error. But I get a message - Number of records requested does not match number transferred (packet 1).
This is a first use of a new source system to this BW. All master data loads give me the same error.
What is setup wrong?

Hello RoberT,
& How r u ?
For the same 0PLANT we load data on daily basis. Not only for this but also for more Master Data Objects. For some of them we used to get this message but not as an Error. On pressing the Update Tree (Refresh) it will change the status.
Anyway u got the records in the PSA so there is no problem with the data load. What signal u find in the Monitor ? Yellow or Red ? If yellow wait for some time, press Update Tree.
Best Regards....
Sankar Kumar
+91 98403 47141

Data type of the base attribute or the base value does not match...

...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
Michael

Technically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
    SQLDataType="NUMBER(12,2)"
    ETMeasureColumnName="REGISTRATIONS"
    Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template.

[Solved] Ise does not match custom policy attributes!!!

example
authentication policy
if guest - and -
device location starts with : building_1 then GuestAccess
everithing goes fine
but
if MicrosoftWorkstation - and -
device location starts with : building_1 and IdentityGroup:Name MATCH Guest then GuestAcces
does not work!!! (match starts with equals etc...)
or
if Guest and -
device location starts with : building_1 AND IdentityGroup:Name MATCH Microsoft then GuestAcces
does not work!!! (match starts with equals etc...)
it doesn't even match the string "a" or "i" or "o"
this is to grant guest access only to microsoft workstation or apple devices after being profiled
what's the problem?

Hello Giuliano-
I have used the location field to build policies before and never had the problem. Can you provide some additional info:
What version of ISE are you using
Do you see a failed authentication in your live authentication window. If so can you post:
The reason for the failure
The detailed output of the failed attenuation. More specifically the output that contains all of the matched Radius attributes.

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
       at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
       at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
       at $Proxy2.modifyx(Unknown Source)
       at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

DPS6: hiding attributes for entries not matching a specific objectclass

I'd like to be able to hide some attributes, but only for entries not matching a given objectclass.
DPS 6 allows data hiding rules to apply to a specific subset of entries, but the subset can not
be defined thanks to a negative filter such like (!(objectclass=MyAuxiliaryObjectClass)).
If I hide the attributes at the view level, then it takes precedence over any "allow rules", so I don't see how
I can achieve this.
Any idea ? support plan ?

Just to add some more details, I've tried to use a virtual ACI in order to define my filter but there's no "targetfilter" support in DPS, and with different other ACI combinations, it can not work because there's no implicit deny ACI in DPS:
Even with only "allow dpsaci's" , attributes not specified in those dpsaci's are still allowed by the viewable-attr parameter of the view. Moreover, if I use the viewable-attr/non-viewable-attr view parameters, then the not explicitly allowed/explicitly denied attributes defined at the view level take precedence over the dpsaci's .

Trying to reconnect media...Some attributes do not match..

Using FCP 7
Hey all,
I'm trying to do some color grading for a friend. She gave me the raw video files and the fcp project files on a hard drive. When I opened the project file, all the media was offline, so I assumed I needed to reconnect them. However, when I find the clips and try to reconnect it says:
"Some attributes of one or more of the files you have chosen do not match the original. This may cause problems within the sequences that are dependent on them. The attributes that differed are as follows:
-Rate
-Reel
Would you like to try to connect them again?"
Is this a big deal? What exactly are "Rate" and "Reel" referring to?
And how do I fix this, or do I even need to worry about it?
Just for clarification, all I'm doing is bringing it into final cut so I can send to color and color grade what she has edited together.
Any help would be wondreful

It looks like you are using legacy FCP. This is the FCP X forum. You'll probably get more adequate answers in the Final Cut Studio forum.

PublicKey attribute does not match

I'm publishing a VS2010 project (was converted from a VS2005 project) but keep getting the following warnings:
Warning 1 The value of the 'PublicKey' attribute in 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' does not match that of file 'c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi'.
Warning 2 The value of the 'PublicKey' attribute in 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' does not match that of file 'c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\Crystal Reports for .NET Framework 4.0\CRRuntime_64bit_13_0.msi'.
I've seen a couple others post this same warning but I haven't seen any answer yet. How can I resolve this so I no longer get the warnings?
Thanks.

Just for those following this thread in the future. The way to limit the ClickOnce to 32 or 64 bit install is documented in the following KBs:
[1553482 - How to force the 32bit runtime to install on all CPU Architectures (Intel and AMD64) when using Click-Once deployment|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433383332%7D.do]
[1553968 - How to prevent the 64 bit msi installing on AMD64 processors when using Click-Once deployment|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933363338%7D.do].
- Ludek

Attributes of request do not match buffer attributes

Similar Messages

Maybe you are looking for