Attributes of system message changing from warning to Erroro message

dear experts,
             I have an issue regarding to change the sytem message from warning to error message .For some materail groups are under Purchase requisition release Stratergy.For this without releasing Pur req system should not allow to raise  P.O .At that time system should thro error message- Pur req &,item &,not released for ordering.So in SPRO -MM-Purchasing -Environment Data-Define Attributes of sysytem message.
Here
Ver     Appl    No                           Message                                     Text Categ
00       06       055       Pur req &,item &,not released for ordering      E
The above settigs has been made & saved .
Now we created Pur req with ref to the material Group which are under release Procedure & saved .But with out releasing Pur req we are  raising  P.O with ref to Pur Req by this time when i was saving System should throw Error message -
Pur req &,item &,not released for ordering .Its not reflecting as per the configuration.
     I have checked in Table level also ,here the data's are updating as per the configuration Error message.
Table Name-  V_160m
Field Name -MSGNR (Message Number)
Field name- ARBGB( Application Area i,e ME)
Field Name -MSGTP( Error or Warning).
   Kinldy give me your suggestion as soon as possible.
Thansk In advance
vishal

Hi,
While  defining release strategy check in release statuses whether you and selected S-first indicator (blocked)
(In top) .......and 2-Request For quotation/Purchase indicators....
regards,
Patil

Similar Messages

  • How to change P.O. duplication message type from warning to error for Order

    Hi Experts,
    I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate.  I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType).   If this BAdI is not good way,  is there other way? and how to please?
    Please advise / help..
    Thanks, Jin

    Thanks Easwer for your help. 
    The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much.  I need to learn where I can see the system status of the template,  i.e.  I1034 (Order Template) or Order or Quotation .....?  if I need to filter out Quotation, I can easily do it in the BAdI.   Could you please provide me more details?
    Thanks again, Jin
    Thanks again, Jin

  • The message no vl049 is changed  from warnning prompt   to error  prompt.

    hi :
    i want to change the message type from warning  prompt to error prompt.please provied  me with means .
    best regards.

    Dear wang
    In normal circumstances, this is not adviceable.  In fact, the message number you indicated is linking to so many programmes and it will be unsafe if you touch these programmes wrongly.
    Still if you want to make changes, follow the steps mentioned below.
    Go to SE91, give VL in "Message Class" and 049 in "Number" and execute.  Block the line 049 and press "CntrlShiftF3".   You will see a Programme there.  Place your mouse on the white box on the left of the Programme and again press "CntrlShiftF3".  It will take you to another screen where you will see a Programme.  Select this and again press "CntrlShiftF3". 
    Now you can see a lot of programmes listed.  Select a programme (PLEASE BE CAREFUL IN SELECTING THE CORRECT PROGRAMME) and
    press "CntrlShiftF3", so that the system will take you to a screen where the codings are written. In that,  search the particular message number and below that you will see, code "I" is written which means, the message throws an information.  If you want to throw as error message, change this to "E".
    Take the help of ABABer and do all these.
    thanks
    G. Lakshmipathi

  • Ipod won't change from 'do not disconnect message', won't show up in itunes

    My aunt has asked me to figure out how to get her ipod nano to work. So this is my story:
    When I plug it into the usb port is says 'Do not disconnect'. The menu and other buttons are unresponsive. If I reset it, it will say do not disconnect again. It will show up in windows explorer but not itunes.
    1. I checked out itunes, and it is itunes 4. (4.7.0.42) So I downloaded itunes 7 (you need itunes version 6 or better I think). I tried to install it but that was unsuccessful. I could not get past the 'stopping service' portion of the install. I got this message:
    'error 1921. Service Ipod Serivce (iPodService) could not be stopped. Verify that you have sufficient priveleges to stop system serices.
    I got that error twice, once when my ipod was connected to the computer and without it connected.
    2. I tried to reinstall from the cd. It said to connect the ipod to see if it needs formatting. I did and it was apparently formatting. Although it never finished after about 30 minutes I gave up and closed it down.
    3. It appears to be charging because I get the battery with a lightning bolt when it is connected to the computer.
    4. Periodically I will get this message:
    The selected port, COM1, is not available at this time. HotSyncManager will open the port when it becomes available.
    So how can I get the latest itunes installed correctly and how do I get the ipod to work? (right now it never says anything other than 'do not disconnect' and it doesn't show up in itunes)
    Thanks.
      Windows XP  

    I have found a solution.
    The cd I was trying to format the ipod nano for was for a different ipod mini. So that is why I had problems formatting.
    As for installing the itunes software: I found a troubleshooting page for it. There was a section that described uninstalling quicktime, ipod, and itunes programs and manually deleting files and restarting. That worked for me, after that I was able to install itunes 7 and I could use the ipod nano.

  • TS2755 Text Messages changing from what's originally sent

    Has anyone else experienced their phone sending the correct message to the correct recipient but then changing how that message is displayed on your phone to something different from what was sent? For example, if the message you sent originally said "How is your day going though?", the phone might correct it later to read "Are you doing alright?" The autocorrect function on my phone has been turned off since I first got it back in January, and my phone hasn't tried to correct my texts before so I'm curious as to why this might be happening. If anyone else has experienced this happening to him/her, please let me know how you resolved it! THANK YOU!!

    This is due to sharing Apple IDs.
    Go to Settings > Messages > Send & Receive and make sure only the phone number is checked.

  • IPhone won't change from iMessage to text message

    My colleague had iPhone then had to get rid of it.  He no longer gets my texts as my phone is still using iMessage to text him.  I erased his cell number and re-entered it and that did not work.  What can I do to make my iPhone use text messaging to him now?

    He should have turned off iMessage on his old phone before getting rid of it.  If he ever registered it with Apple, he might be able to do the following:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "edit products"
    Click on the "x" to the right of the product.
    Click "unregister"
    Unregistering it often deactivates his number with iMessage.

  • Have system requirements changed from 10.0 to 10.0.1?

    I have final cut pro x installed on my mac.  I have a  ATI Radeon X1900 XT and 10.0 worked just fine, still does.  Try to download update and it says my graphics card in incompatible.  this is quite frustrating.

    Ian R. Brown wrote:
    It sounds like a plan to encourage you to update to the latest computer but I am sure Apple would not do anything like that.
    Apple is a hardware company, all of their software is designed to sell hardware... been that way for years.

  • Message creation from Service Desk when Message Processor field is updated

    I want our Service Desk system to create a message to the message processor only after the message processor field is updated. I do not want it to send e-mails when there is a status update. Any ideas?

    Hi,
    You can have the email on status update, but make it partner dependant.so that action will be executed whenever you put bp for processor and save without changing status.
    regards,
    mahantesh

  • How can I stop my audio message recorder from automatically recording audio messages? I am not even pushing down the button.

    I am having trouble with my Messages app. Sometimes the keyboard messes up as I text and I also am having trouble with my audio message microphone. It is automatically recording messages without me doing anything. I won't even be typing, my hand is nowhere near the button and all of a sudden I look down, and thirty seconds of audio has been recorded. It doesn't usually send, but sometimes it sends on its own.
    Any insight would be greatly appreciated.

    Reset your iPhone: hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.

  • N96 text messaging Problems auto change from sms t...

    N96 text messaging changes from SMS to MMS when delivering to more than so many people how do i stop this
    i create a text and when i select add recipients if i select so many people it changes the text to a MMS if i add a group of people it does the same too. How do i stop this?

    roll on the firm ware updat from what i can see there a hell of alot of bugs. and i dont know how there logic works out with the MMS being cheaper.
    You send a 1 -3 page SMS text to someone it costs 30p (or free if u have free texts) you send 1 MMS it costs roughly 35p.
    ok the text will be reduced to 1 message when changed to MMS but still cost u 35p instead of 0p.
    Also the N96 at 1st is only available on CONTRACT which means people going to have free texts so i the long run its going to cost people more money the way they have it set up plus if you dont know about this feature and send texts that it changes to mms (WITHOUT IT ALLERTING YOU) it costing people money they got some kind of commision going with the service providers?
    a simple feature would of been to have it so it goes to change it and comes up with a message and the option to keep the same or convert but that would be too simple wouldnt it lol.
    Dont you just love big companies ways of thinking (they dont!!!)

  • [svn:fx-trunk] 7661: Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.

    Revision: 7661
    Author:   [email protected]
    Date:     2009-06-08 17:50:12 -0700 (Mon, 08 Jun 2009)
    Log Message:
    Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.
    QA Notes:
    Doc Notes:
    Bugs: SDK-21636
    Reviewers: Corey
    Ticket Links:
        http://bugs.adobe.com/jira/browse/iso-8859
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/SDK-21636
    Modified Paths:
        flex/sdk/trunk/templates/swfobject/index.template.html

    same problem here with wl8.1
    have you sold it and if yes, how?
    thanks

  • Project definition system status change details

    Dear PS experts,
    Request, kindly let me know which report is available to show the system status change from
    crtd to rel
    rel to teco
    teco to clsd
    we would like to analyse which date or period the system status changed thru edit-status
    from crtd to rel
            rel to teco
            teco to clsd
    we don't use any user status.
    i have checked cn60 & all reports from cn41 to cn47, but i don't get any report states about the change details of system status.
    pl help
    srihari

    thanx,
    can u pl tell me about cn60 std report, does this use for system status change or any other purpose, pl let me what purpose this report is available for us.
    i wanted to know only the changes taken place in project definition with regard to crtd to rel or rel to teco or teco clsd, there should some report which will give this data without touching the tables.
    pl help
    regards
    Srihari

  • Events or attributes triggered by data coming from a data file

    Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? If not, does anyone know or have some scripting suggestions to do that. For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
    Thanks

    That is how I solve your question.
    I use a formula in Excel:
    I import the result in ID, not Column A, but B (result of the calculation):
    And I modify the paragraph style like this:
    It is easy and fast to do. 

  • Software Update icon in System Preferences changed

    Never seen this before. This morning I noticed that Software Update icon in System Preferences changed from the regular one to a BIG switch. Noticed this only in MBP.

    I got it back. I moved Software Update preference pane from /System/Library/PreferencePanes to Desktop and moved it back. The original icon is back ! Ofcourse I ran Disk Permissions after checking.

  • Synchronous message mapping - access to originating request message?

    Say you have a synchronous message - like a SOAP web service request - and you map it to an RFC call, is there any way for the message mapping from the RFC response message to the SOAP response message to access fields from the original SOAP request message?  Or even just a temporary storage area that I could store values from the originating request message?

    Hi Jonathon!
    First of all, why not access the original soap request message inside the RFC..you will be receiving this data in your RFC...is the RFC is standard, maybe you can make a wrapper with a Z RFC of your own to store the original data and use it later to build the RFC response.
    Another idea: you could call a RFC via JCO inside a UDF in mapping.. this RFC could write  some data in XI business system during the request mapping and another call to a "reading" RFC could read that data in the response mapping.
    Other idea: use BPM, you can use containers to store the request SOAP message, call synchronously the RFC and then use a transform step (mapping) to use the original request SOAP message and the RFC response message to "merge"/build the response for the SOAP.
    Regards,
    Matias.
    PD: please give points if useful.

Maybe you are looking for