ATUALIZATION SPAM IN PHASE IMPORT_PROPER LONG RUNNING

Hi,
Help me
Atualization of SPAM (SAPKD0023) : Long running in phase main import.(IMPORT_PROPER)
Just warnings (4).
Windows Server 2003 enterprise Edition 4GB Ram Oracle 10.2.0.2

Hi ,
The problem was solved running the statistics of Oracle.

Similar Messages

EHP4 for ERP 6.0 upgrade phase MAIN_SHDRUN/DDIC_UPG running takes long time

Dear all,
I just tried to upgrade a fresh ERP 6.0 EHP4 ready (Linux X86_64 - Oracle) to EHP4 ERP 6.0.
I go through phase MAIN_SHDRUN/DDIC_UPG running, but it takes a very long times.
I checked the server resources usage, it 's very low.
I checked on my ERP 6.0 system and also the shadow system (background job, SM50), it seems no activities on both).
MAIN_SHDRUN/DDIC_UPG running - what is this phase about?
Its normal for this phase to takes about several hours??
What should i check to ensure that the upgrade process is still running?
How can i estimate time needed for this EHP4 upgrade?
I installed that freshERP 6.0 EHP4 ready system only on around 3-4 hours.
Regards,
Fendhy.

Dear All,
I have same issue in ERP 6.0, EHP4 update, "MAIN_SHDRUN/DDIC_UPG" phase is still running, 24 hours passed. (only for this phase)
This is a NEW installation and on Production. I had no issues with DEV and QA and has taken only 50 minutes for the same phase.
Everything is same between DEV and PRD except, Production is on AIX HACMP cluster and using latest Ehpi installer + latest SPAM - version 41.
- There is no any error or warnings in /usr/sap/SID/EHPI/abap/log directory
- Phase is running, writing and reading files to installation directory
- No any automatic cluster fail-over mechanisms enabled
- Cluster has two nodes, DB+ASCS on one node and CI on other node.
- Shadow instance is running, can login, no errors in sm21, st22, no any running or canceled background jobs
- I can see 15% to 35% CPU "waits" in CI node where ehpi is running, but 50% of CPU is idle
- Also on same CI node, 70% to 100% disk busy waits can be seen on disks which mounted Ehpi installation directory
- On DB node CPU utilization and disk utilization is low
What could be the reason? Any idea ? How to diagnose.
Thanks,
P.D

Long time for phase IMPORT_PROPER - install. BI_CONT

Hello,
I try to install Add-on BI_CONT Rel.703. But in transaction saint,
BI_CONT is locked for three days on phase IMPORT_PROPER.
Is it normal that takes a long time ?
What can I do ?
Thanks
Best regards,
Message was edited by:
        Aurélien HENRY

Hello,
I have this log :
WARNING:       Background job RDDIMPDP could not be started or terminated abnormally.
      Please check that the R/3 system is running.
      Please check the system. Use transactions SM21, SM37, SM50.
WARNING:       (This warning is harmless if no further warnings follow.)
Thanks for help
Best regards,

Spam is hanging in phase IMPORT_PROPER

Hi!
I am facing with hanging SPAM error in phase IMPORT_PROPER (patch of SAPKB70013 - SAPKB70016).
The SPAM patch terminates after a few sec. in DDIC activation action.
I have looked into log file and founded folllowing:
The job RDDEXECL terminated with error.
The reason seems to be sysntax error in program "CL_PROXY_SERVICE=======CP".
Futhermore I could detect that table SI_WD_FIRST_MAIN_SCREEN cannot be activated.
Can some one help me to solve this problem?
Of great interest was the following:
rescedule possibilities of job RDDEEXECL in order to contibue patch
start of SPAM or tp-commando by ignoring this error
Thank you very much!
Thom

Moved to NW Admin...

SPAM-Patch (SAPKB70014) is hanging in phase Import_Proper

Hi experts!
I have problems to patch the SAP-Basis component (SAPKB70014) for SAP ERP 2005.
The problem is that the patch is hanging in the phase Import_Proper.
I read suitable SAP Note 822379 and changed the kernel to Patch 133 or 146, but it does not help.
The system is installed via heterogeneous system copy.
I have also other problems, e.g. Dump u201CITAB_DUPLICATE_KEYu201D by accessing into the tcodes DB13, DBACOCKPIT.
Enclosed the last lines of the log file ULOG08_2
Any helpful information is very appreciated and will be awarded with points.
APServiceVHT 20080526133153 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133221 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133221 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133224 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133224 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133246 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133246 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133248 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133248 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151612 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151612 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151614 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151807 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151807 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161807 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161807 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161810 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165518 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165518 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165520 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165743 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165743 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
Regards
Thom

Hi,
I have similiar problem with patching SPS from 9 to 14 level on NetWeaver2004s.
One background process is working second day, but it has status - STOP.
When I'm logging into system a have "Status 0020 of the user interface SAPMSYST missing" message.
Thom did you resolve your problem?
Regards
Michal Sarna

Long running in Move Nametabs phase while applying SAPKIBIIP2

HI All,
I am applying SAPKIBIIP2 (BI 7.03) patch, its long running in MOVE NAMETAB phase, I checked dumps in st22..there were no dumpsu2026in sm37 RDDMNTAB is also active & in sm50 I found its taking long Sequential Read for this table D010TAB. Checked OS space also..no space issueu2026checked tablespace thru brtools I found for 2 tablespaces ists almost 99% usedu2026I found on forums..i need to rum table statics for above table & also increase the tablespace for 2 tablesu2026.my concern is u2026shud I stop this running patch & do all ths activitesu2026or I should wait till this completesu2026???
If I stop this patch & increase tablespace n again start ths patchu2026what are the possibilities of DUMPu2019s??? coz I need to deliver the system ASAP.
Waiting for your repliesu2026.
Regards,
C Singh

No such errors or warning there nor in systemu2026pls find entries in SLOG
START imp all              BIP        20100424163726              DDIC         sapbiprd 20100424163726484
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF BIP N      not needed                  DDIC         sapbiprd 20100424163726484
START tp_getprots          BIP P      20100424163726              DDIC         sapbiprd 20100424163726484
START imp all              BIP        20100424164804              DDIC         sapbiprd 20100424164804748
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF BIP N      not needed                  DDIC         sapbiprd 20100424164804748
START tp_getprots          BIP P      20100424164804              DDIC         sapbiprd 20100424164804748
I canceled now patch..but RDDMNTAB is still running in sm37 & sm50 it shows same for tht table.?
Regards
C Singh.

LONG RUNNING OPERATION의 진행상태 확인방법

제품 : ORACLE SERVER
작성날짜 : 2002-04-09
LONG RUNNING OPERATION의 진행상태 확인방법
==========================================
Oracle 8.0 부터 제공되고 있는 v$session_longops 는 단일 long running
operation에 대한 진행 상태를 operatoin별로 제공해 주는 view로 DSS, DW와
같은 long running job이 많은 system에서는 유용한 정보를 확인할 수 있는
table이다.
다음의 test는 oracle 8.1.6에서 이루어졌으며 v$session_longops
view는 oracle 8.0.x과 8.1.x에서 structure 상 조금의 차이가 있음을 미리
알려둔다.
Oracle 8i에서 이 dynamic view에서 다루어지는 operation들에는 다음의
것들이 있다.
Operation Description
Archiving (1)
Rman Backup and Restore
Parallel Query
Recovery ( Crash and Media )
Full Table scans (2)
Sorting
Analyze using DBMS_STATS Not seen yet
Hash Cluster Creation " " "
Hash Joins Phase 2 " " "
(1) : document로는 제공이 되고 있는 것으로 되어 있으나 아직 구현되지
않음
(2) : 10000 blocks 이상의 full table scan을 long operation으로 간주한다.
V$SESSION_LONGOPS COLUMNS
COLUMN DESCRIPTION
SID Session identifier
SERIAL# Session serial number
OPNAME The operation name
TARGET The object on which the operation is carried out
TARGET_DESC Description of the target
SOFAR The units of work done so far
TOTALWORK The total units of work
UNITS The units of measurement
START_TIME The starting time of operation
LAST_UPDATE_TIME Time when statistics last updated
ELAPSED_SECONDS The number of elapsed seconds from the start of
operations
CONTEXT Context
MESSAGE Statistics summary message
<TEST CASE>
### SESSION A ###
SQL> select userenv('sessionid') from dual;
USERENV('SESSIONID')
31948
SQL> SELECT COUNT(*) FROM PARTTAB;
--> waitting . . .
### SESSION B ###
SQL> connect internal
SQL> select opname, time_remaining, sofar, totalwork, message
2> from v$session_longops
3> where sid = 110 and time_remaining > 0;
OPNAME TIME_REMAINING
SOFAR TOTALWORK MESSAGE
Table Scan 138
75332 341590 Table Scan: SCOTT.PARTTAB: 75332 out of 341590
Blocks done
==> operation의 진행율이 약 22%로 138초가 남았음을 보여준다.
SQL> r
OPNAME TIME_REMAINING
SOFAR TOTALWORK MESSAGE
Table Scan 50
242846 341590 Table Scan: SCOTT.PARTTAB: 242846 out of 341590
Blocks done
==> operation의 진행율이 약 71% 로 약 50초가 남았음을 보여준다.
SQL> r
OPNAME TIME_REMAINING
SOFAR TOTALWORK MESSAGE
Table Scan 115
93889 324446 Table Scan: SCOTT.PARTTAB: 93889 out of 324446
Blocks done
==> TOTALWORK가 변한것으로 보아 다른 partition에 대한 full table scan이
진행중임을 알수 있다.
% v$session_longops에는 이미 종료되거나 취소된 operation들에 대한 정보가
남아 있게 되므로 active operation인지 먼저 확인해야한다.

WIJ 20002 error on long running reports

When trying to run a long running report, an error message is received .
Quote:
*"The Web Intelligence Java Report Panel cannot connect to the server. Close
the report panel and try to connect again or see your BusinessObjects
administrator. (Error: WIJ 20002)"*
What happens next is you are advised to "close" (twice) and are then advised to close this window.
If you select Details on the first error message:
Server: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet?
java.lang.RuntimeException: java.io.IOException: Server returned HTTP response code: 502 for URL: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
     at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:437)
     at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
     at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
     at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
     at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
     at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
     at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
     at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
     at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
     at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
     at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
     at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
     at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
     at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
     at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:441)
     at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
     at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
     at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
     at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
     at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
     at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
     at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
     at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
     at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
     at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
     at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
     at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
     at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Please let me know what the solution is.

Matt,
A namesake of yours is my client for this issue.
Coming to the problem, the customer says there is proxy configured between HTTP server and WebSphere. This proxy server times out for long running reports. If the HTTPServer is bypassed, things work fine.
A colleague of mine opened a case with BOBJ. I can get you the case# if you need it. We got this reply:
From: Takano, Hitomi
Sent: Tuesday, November 04, 2008 10:26 AM
Hi Matt,
I was away for the last two days, so I couldn't reply to you sooner.
Extending the timeout setting from Webi and Infoview in BOXI R2 will not
make the long running reports work as your proxy setting at the lower
layer than BOXI just allows 5 minutes and after that the connection will
be cancelled by the proxy. I'm not sure why this setting was effective
for https only or timeout out after 2 min. This is out of scope of BOXI
R2 and your network admin would be the best person to handle. You were
getting 502 error in Java Report Panel. I googled with "502 error and
ProxyTimeout", and I got the some articles returned which say when
backend doesn't answer on requests(because it timed out), it returns to
a client an error 502.
I'll close this thread as the n/w admin at the client are working things out.
Thanks for your support.

1st gen iPod Touch, old app no longer runs

I have a first generation iPod Touch, version 3.1.3. About a year ago I bought an app, "Converter Plus (Universal)", and it worked fine until recently when I received notice of an update. There were a few app updates and all loaded successfully except the Converter Plus (Universal) which gave me an error message that the software I have does not support the updated app. I understand and accept that my old iPod Touch does not support most (almost all) new apps. The problem, however, is that the old Converter Plus (Universal) app that worked fine for a year no longer runs. I try to open it, the initial screen pops up but shuts down right away. I can only assume that when the recent update was attempted but failed it somehow messed up the old app. Is there any way to restore the old version of the app so I can go back to using it? The app only cost $1.99 so it is hardly the end of the world if I cannot use it any more, but I am worried all my other older apps (some of which receive regular updates) might also stop working and that just seems wrong to me. Feels like I am being robbed. Thanks for any suggestions.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try deleting the version of that app that is in your iTunes library. Then do the following:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
Then delete the app from your iPod and sync the app back to your iPod and see if it works.
- Next try restoring from backup. Make sure that all the apps that are compatible with 3.1.3 are in your iTunes library so they can be synced back as part of the restore from backup.
- Last, restore to factory settings/new iPod and sync your media to the iPod.

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Long running DBAdapter partnerlink activities (transactions)

Hello,
I try to use nonBlockingInvoke = true for long running DBAdapter partnerlink activities,
but i'm not succesfull.
In BPELConsole the activity seems to be running, but there is an entry
in Manual Recovery > Activity TAB and OraBPEL~OC4J_BPEL~default_island~1
log says:
<2006-02-10 09:32:05,130> <INFO> <test.collaxa.cube.ws> <AdapterFramework::Outbound> file:/ora/app/oracle/product/bpel/integration/orabpel
/domains/test/tmp/.bpel_ZalozeniObjednavky_1.2.jar/ZapisObjednavky.wsdl [ ZapisObjednavky_ptt::ZapisObjednavky(InputParameters) ] - Using
JCA Connection Pool - max size = <unbounded>
<2006-02-10 09:32:05,390> <ERROR> <test.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube engine": Callback in
vocation failed.
An attempt to invoke the method "handleCallback" on the performer "bpel.p0.BPEL_BIN$$BPELC_BpInv0" failed. The reported exception is: "".
Please ensure that the signature of the method "handleCallback" is: ( IWorkItem, ICubeContext ).
<2006-02-10 09:32:05,406> <ERROR> <test.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ...
exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.CallbackInvokerMessage";
the exception is: Callback invocation failed.
An attempt to invoke the method "handleCallback" on the performer "bpel.p0.BPEL_BIN$$BPELC_BpInv0" failed. The reported exception is: "".
Please ensure that the signature of the method "handleCallback" is: ( IWorkItem, ICubeContext ).
Does anybody succeed with nonBlockingInvoke = true on DBAdapter partnerlink?
I use BPEL 10.1.2 patch02
Thank you
Karel

Hi Jon,
 
 
You can set the maxConnections which represents the Maximum number of connections in the pool in oc4j-ra.xml.
Please refer to the section Oracle Application Server Adapter for Databases in Oracle® BPEL Process Manager Developer's Guide
for more information.
 
 
Aruna

Long running threads (Jasper Reports) and AM-Pooling

Hi,
we are developing quite large application with ADF an BC. We have quite a lot of reports generated through Jasper that take quite long time to complete. The result is a PDF document that user gets on the UI so he can download it over download link. Reports that take over an hour to finish are never completed and returned to the user on UI. I think the problem is in AM-Polling because we are using default AM-Polling settings:
<AM-Pooling jbo.ampool.maxinactiveage="600000" jbo.ampool.monitorsleepinterval="600000" jbo.ampool.timetolive="3600000"/>
The AM is destroyed or returned to pool before reports finishes. How to properly configure those settings that even long running threads will do there jobs to the end.
We also modified web.xml as follows:
<session-config>
<session-timeout>300</session-timeout>
</session-config>
Any help appreciated.
Regards, Tadej

Your problem is not related to ADF ApplicationModules. AMs are returned to the pool no earlier than the end of request, so for sure they are not destroyed by the framework while the report is running. The AM timeout settings you are referring to are applicable only to idle AMs in the pool but not to AMs that have been checked out and used by some active request.
If you are using MS Internet Explorer, then most probably your problem is related to the IE's ReceiveTimeout setting, which defines a timeout for receiving a response from the server. I have had such problems with long running requests (involving DB processing running for more than 1 hour) and solved my problem by increasing this timeout. By default this timeout is as follows:
IE4 - 5 minutes
IE5, 6, 7, 8 - 60 minutes
I cannot find what the default value is for IE9 and IE10, but some people claim it is only 10 seconds, although this information does not sound reasonable and reliable! Anyway, the real value is hardly greater than 60 minutes.
You should increase the ReceiveTimeout registry value to an appropriate value (greater than the time necessary for your report to complete). Follow the instructions of MS Support here:
Internet Explorer error "connection timed out" when server does not respond
I have searched Internet for similar timeout settings for Google Chrome and Mozilla Firefox, but I have not found anything, so I instructed my customers (who execute long-running DB processing) to configure and use IE for these requests.
Dimitar

Web.Show_Document does not work with long running reports

I am using Web.Show_Document() to call reports from Forms. Everything works fine for smaller reports. However for long running reports I do not get the output instead get the page "This page cannot be displayed.". On checking the job status on the report server I find that report is still running and completes after some time but by that time my http request has already timed out. What configuration do I have to change to make my long running reports work.
Thanks

So, looks like this is an IE issue. I need to add the form server site to my list of Trusted Sites. Once I did that, everything started to work fine. Thought I'd share in case anyone is really interested.....

Script to kill long running reports in OBIEE

Hi
I have requirement to kill long running reports . I am using OBIEE version 10.1.3.4.0 which has a bug where it is not taking query limits governor and the reports are not getting killed if i am setting that parameter in RPD.
Oracle support has advised me to upgrade to next version, but for now, i cannot upgrade.
Can anyone suggest me script to run on obiee app server that can kill long running reports on obiee and database server.
I have AIX server and all reports run on database with same functional ID that is being used for ETL as well to Analytics database.

Shikhs17 wrote:
Hi
I have requirement to kill long running reports . I am using OBIEE version 10.1.3.4.0 which has a bug where it is not taking query limits governor and the reports are not getting killed if i am setting that parameter in RPD.
Oracle support has advised me to upgrade to next version, but for now, i cannot upgrade.
Can anyone suggest me script to run on obiee app server that can kill long running reports on obiee and database server.
I have AIX server and all reports run on database with same functional ID that is being used for ETL as well to Analytics database.Do you want to enforce the limitation on the database to automatically kill running sessions that run over specific period of time?

Long running reports using java servlets

Hello,
I'm running into a problem using java servlets to produce database reports and sending them back to the client browser as excel or html. The problem comes into play when the user has submitted two reports then goes to run a third and the browser hangs. I realized now that this is because of the two active connections that the user already has to the app server. Does anyone have any suggestions on how to get around this? I'm trying to now write the report to the server, and provide the browser with a url, but it seams as though the connection isn't totally closed even though I close the response printwriter.... Any suggestions would be greatly appreciated....

Unfortunately I dont have an answer to your question, but:
If the reports are large/long running, should they be generated on demand? You could schedule the reports to be generated every day, month or whenever appropriate, stored on the server and then quickly pulled by the user whenever needed.

ATUALIZATION SPAM IN PHASE IMPORT_PROPER LONG RUNNING

Similar Messages

Maybe you are looking for