Atv 3 can see wifi but will not connect?
i can see my wifi but when i connect with the correct key i just get an error, was working fine untill about 3 weeks ago?
it says
there was a problem connecting to the network
check your settings and try again (-3906)
i have reset then re-installed software using my iMac,
yesterday i purchased a new router and installed and it is still the same error??
if you connect the atv by cable it works fine but the position of it means i really need to use the wifi
regards Simon (thanks for your reply)
Similar Messages
-
just bought ipad 3 and trying to connect to home wifi, can see network but will not let me progress to enter router password?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
IPad 2 can see wifi but doesn't connect ... What's going on???
iPad 2 can see wifi but doesn't connect ... What's going on???
A few more things that you can try.
Turn WiFi off - restart the iPad - turn WiFi on again and then try to connect again. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Try to join again.
Go to Settings>General>Reset>Reset Network Settings. Then select your WiFi network again and try to join again.
Go to Settings>WiFi>Tap on the arrow next to your network name and then tap on Forget this Network in the next window. Then back out of the setting and go back to WiFi and let the iPad find your home network and then tap on the network name and try joining it again.
Do the same thing as above except don't tap on Forget this Network - tap on Renew Lease at the bottom. -
HT4528 My iphone 4s is connected to my wifi but will not connect to internet
My Iphone 4S is connected to my wifi but will not connect to the internet. Does anyone know how to fix this?
Try going to settings>general>reset>reset network settings. Once you've reset your network settings you will need to be able to plug in your wifi/router password to your wifi appliance. (password to wifi router)
Good luck. -
Macbook will connect to wifi but will not connect to internet
Lately I've been experiencing an issue with my internet, my computer will connect to wifi, but the internet will not work. I have tried multiple wifi networks, and sometimes the internet works but it is slow, or sometimes it won't work at all. For whatever reason apple.com is the only one working at the moment.. how convienent.. I have rebooted my laptop, the router and my operating system is up to date. Please help!! I'm a college student and internet is crucial for one of my classes!
Check proxies ...
Open System Preferences > Network > Advanced > Proxies
Deselect any checked boxes on the left then click OK.
Relaunch your browser to test.
And make sure the firewall is off. System Preferences > Securty & Privacy > Firewall
If it's on, you may need to click the lock icon to turn if off. You may be prompted for your admin password.
Message edited by: CS -
HT1414 just updated ipad to latest software version. finding wifi but will not connect
Just updated ipad to 6.1. Finding wifi but not connecting.
1. Turn router off for 30 seconds and on again, this will refresh the IP address of the iPad.
2. Settings>General>Reset>Reset Network Settings
3. Try changing router security e.g. WEP/WPA/WPA2
4. Have you updated router firmware? -
Iphone 5c is connected to Wifi but will not connect to internet
Have had my Iphone for a year now and have never had this issue before. The device shows I am connected to the wifi but tells me it cannot connect
to the internet. Any ideas?I know having wifi connection is important to your data usage amlaco. I'm sorry you're not able to use the internet . Have you tried to disable your wifi connection and renable it? Are you connected to your home wifi? Have you contacted your internet provider that is connected to your wifi?
Kinquana_VZW
Follow us on Twitte @vzwsupport -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work
I too am having the same problem. I'm glad to know it's not just me
-
Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.
I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.
-
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.
Maybe you are looking for
-
Fiscal Year Variant not Maintained
Hello All, while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600". but i have configured Fical year variant and assigned to co code, i am able to
-
Condition records wrongly populated in sales order instead of billing doc.
condition records are maintained billing wise to populate in the billing document for pricing condition where as while creating the sales order itself i am getting the condition records populated in the sales order which is not correct as it needs
-
Cannot update, reinstall, uninstall 9.3.3 in windows 7 pro 64 bit
Acrobat Reader 9.3.3 will not successfully complete the update to 9.3.4. It complains about not having permission for a key (error 1402). Other forum posts and Adobe knowledge base articles do not supply a solution. When I try to uninstall Reader 9 c
-
Storage Type and storage bin in MB26 pick list
Hi, We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not ge
-
Store different filetypes in different content dbs
Hi, is it possible to configure sharepoint to store e.g. different filetypes (by extension like .jpg, .wav, ...) in different content databases? Or maybe store chose by filesize? Thanks a lot and best regards.