ATV - After 2.1 upgrade, no show in iTunes

everything worked fine, and then i did the upgrade and now AppleTV no longer shows up in my iTunes. I did everything except factory reset, to no avail

Check the network settings in the ATV and make sure it's actually connected to the network. If it is, note its network IP address and see if you can ping it from your computer. If you can, that means the network connection between it and your computer is OK.
If the connection is OK and it still doesn't show, go to the Computers section of the Settings menu in the ATV and see if your iTunes library is listed. If it isn't, it could be a Windows/iTunes thing, in which case you might want to either re-install iTunes or re-authorize iTunes in the ATV Computer settings menu (which might cause it to sync again from scratch).

Similar Messages

  • After ios7 update iphone not showing in itunes on iMac as device

    After running latest iphone (4s) update & having the latest itunes update on my iMac the iphone device is no longer showing in itunes. I have checked the USB & changed ports however this does not appears to be the problem as iphone still charging when plugged in. Without this showing as device I have no way to Sync anything.

    Hey Loxwood,
    I found a few documented troubleshooting steps for when your iPhone doesn't appear on your Mac:
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.http://apple.com/itunes/download
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    via: iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Have a great day,
    Delgadoh

  • ATV disconnect during viewing of TV shows on iTunes

    Why is my ATV disconnecting from iTunes and requesting confirmation of my iTunes acccount id? It is being run independently of my mac (not through home sharing) and is getting on the net via a Airport Extreme using 802.11g. It has worked fine for months and now does this disconnect bit like three times a week. I now have to reset or restore depending on whether I can get Apple to acknowledge the abiltiy to download the latest software update. But then I have to reset all my Netflix information. This is a real pain. Not a nice "user experience". Any suggestions.

    How do I do that?  I am in My TV Shows, in the spread-sheet type display.  So, now how do I make one of these “playlists,” and where would it appear?  Are there directions for this anywhere?
    It seems that playlists are supposed to be made using tiny controls in the lower left corner of the iTunes window.  But those controls only show up for music, not for videos (including TV shows) — at least not in the latest version of iTunes.  But maybe I am wrong, and there is a special trick (an undocumented technique).  But actually, everything in iTunes is undocumented: there is no comprehensive manual.

  • After I purchase a TV show on itunes can I burn it to DVD to watch

    I have tried several times to burn a show to a DVD to watch on home dvd player. Im having no luck with it I dont want to watch it on my monitor...Is this the only way I can watch it. Whats the secret to buring it with my dvd buring software to watch on home player....thanks

    Why would you figure that? Personally I expect that if I download it to my computer, that I will watch it on my computer. If I want to watch it on TV, I will go out and by the DVD or go buy an AppleTV.
    And as has been said before, if you have an issue with this, you need to go talk to the copyright holders. They are the ones who make Apple do this

  • HT1689 im updating my iphone 4 and when finished it shows an itunes icon with phone charger pointing up what does this mean & what do i do

    im updating an iphone4 and after a few minutes it shows an itunes icon with phone charger end pointing up what does this mean and what do i need to do

    You are in recovery mode and need to restore in itunes on your computer.

  • ATV "Not Connected" in iTunes After V2.0 Upgrade!

    Before the update was available my ATV was not showing up in iTunes ... Many had this problem.
    After installing the upgrade ATV shows up in iTunes 'Devices' list, in Prefs Sharing status is 'on, no users connected', ATV shows as 'ATV streaming'.
    There are no other setup items to remedy this situation that I can find ... I've reset, unplugged, and restarted everything.
    Any help would be appreciated.

    Before the update was available my ATV was not showing up in iTunes ... Many had this problem.
    After installing the upgrade ATV shows up in iTunes 'Devices' list, in Prefs Sharing status is 'on, no users connected', ATV shows as 'ATV streaming'.
    There are no other setup items to remedy this situation that I can find ... I've reset, unplugged, and restarted everything.
    Any help would be appreciated.

  • Can't Sync ATV after upgrade

    One of my kids upgraded my 40GB ATV from 2.1 to 3.0 last night. After the upgrade, ATV does not appear in "devices" in iTunes 8.2.1
    I can get the ATV to appear if I turn on streaming, but the only tabs that appear for ATV are Photos and General, no movies and no TV shows.
    There's no sync button, and right-clicking the ATV only shows "turn off streaming". When I turn off streaming, the ATV disappears again from the left-hand menu in iTunes.
    I have a number of purchased movies on the ATV that I can't sync back to iTunes. Because of the 40GB size limit, some of this content is going to be lost.
    How can I get the purchased content from ATV 3.0 back to iTunes 8.2.1?

    But the problem is that, all of a sudden, I've lost sync from ATV to iTunes.
    Therefore, I have purchased content on ATV with no way to sync it to iTunes. This "just happened" (I mean, it WAS working normally and then it stopped after upgrade to ATV 3.0).
    I've upgraded iTunes to 9.0.2. I can set up streaming, and that works. But I don't have the option to turn on sync (for any content).
    I'm afraid if I disconnect and reconnect all of my ATV purchased content will be lost.

  • After the latest upgrade, I can't transfer my library audiobook cd's from my computer to my iPod so I can listen to the book. The book shows up on my computer, but not on my iPod.

    After the last upgrade, I can't transfer my library audiobook cd's from my computer to my iPod so that I can listen to the book. It seems to be transferring but
    doesn't show up on my iPod. How do I find the transferred files on my iPod Classic 60GB? Help! I've done this thousands of times before, and this is the 1st
    time I've had a problem, so I'm suspecting the upgrade.

    For non-purchased music like CD ripped songs, you need some third party software like sharepod, yamipod or iPod file manager to copy them from iPod back to computer. if you need details, here is a guide about how to copy iPod music. Hope it helps. Feel free to email me if you need further help.

  • Mobile apps not showing in itunes after upgrade

    After upgrading to iTunes 10.5.1.42, the apps I've purchased no linger show in the library listing.  They are still on my Windows 7 machine in the folder ...\music\iTunes\iTunes Media\Mobile Applications.  They just do not show in iTunes.  Does anyone know how I can get them to show again? 

    I get to this step in step 5 but I dont have the file/directory
    Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
    Where can I download the needed file? I think it is called usbaapl64

  • Adobe After Effects CS3 upgrade doesn't show as product purchased on "My Products and Services" page

    Hi,
    I have purchased both Adobe Photoshop 6.00, a upgrade from it to Photoshop CS2, Adobe After Effects 8, and a upgrade from it to After Effects C3.  The Adobe Photoshop 6.00 shows up with its corresponding serial numberand the Photoshop CS2 upgrade shows up separtely with its serial number.  After Effects shows up as version 8 but has the serial number from the CS3 product and there is only one entry for it. 
    Did I lose my After Effects CS3 upgrade when I used it to get the discount for the Creative Cloud and that is why it is showing up as version 8?
    Thanks, Ron

    Thank you. 
    I should have looked at my old version's box and I would have relized that. So, there is no loss of ownership or anything of that nature in using Adobe After Effects CS3 for the Adobe Cloud discount?  I would be free to even sell it?
    Thanks, Ron

  • I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable

    I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?

    That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
    iTunes: Restoring iOS software - Support - Apple

  • Please i just got an ipnone 4 from my brother in the UK, after unlocking and upgrading to IOS5, it keeps showing "sim card not valid" when i want to activate it. am confused, and any help will be well appreciated. Thanks i live in Nigeria

    Please i just got an ipnone 4 from my brother in the UK, after unlocking and upgrading to IOS5, it keeps showing "sim card not valid" when i want to activate it. am confused, and any help will be well appreciated. Thanks i live in Nigeria

    How was this iPhone unlocked?  Did a carrier unlock for you?
    If you did the unlocking by jailbreaking there is nothing anyone on here can do to help you.

  • After IOS 8 upgrade IPad 2 don't start

    Hi,
    After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

    My ipad2 is having the same problem.  I can get it to start up by plugging the charger in.  I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

  • ATV not showing in iTunes devices

    Just bought my friends ATV - was working ok with his sysytem - he has done a factory restore - to V1 - i have updated to V
    When I select iTunes/Preferences/Devices the ATV is not shown.
    I am connected by ethernet and have also setup to connect to my Airport extreme based network - the network is recognised and i can connect to my iTunes account and i can access movie trailers, podcasts etc.
    I currently stream music to 2 Airport Express's with no problems.
    The ATV showsup in the 'remote speakers dialogue in iTunes.
    1 of my iTunes playlists shows up on the ATV with 0songs!
    Whilst streaming from the iMac i have been able to get the current track playing displayed on my TV - i don't no how?
    I have run a further factory restore and upgraded gain to v3
    I have run the Diagnostic test - the ATV is working normal.
    I have tried to access the ATV from my other iMac - G4800MHZ does not show up.
    I am using Itunes 9.02 on an iMac IntelCore Duo 2.16ghz with 10.5.8 my iTunes library is held on a Lacie USB drive.
    I have tried connecting the ATV direct to the iMac's ethernet port - still does not show-up in iTunes.
    Any ideas would be very much appreciated.
    Thanks
    Ian
    UK

    Thanks for your response,
    I can now understand that my ethernet cable is wrong - but why cannot i connect via the Airport Network - clearly the iMac can See the ATV - it shows up in 'Remote Speakers".
    Regarding the ports, i see the article says...
    These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router.
    ... everything else in iTunes works OK.
    But how would i go about checking that each port is open etc
    I am using a netgear router.
    Incidently, i have also downloaded iTunes to a Win7 laptop and still iTunes does not show?
    Thanks
    IAn

  • Cd/dvd device not recognized after os lion upgrade

    my cd/dvd drive no longer shows up on the device list in Finder. I think it disappeared after OS lion upgrade...I need help fixing this situation.

    Check you settings in Finder > preferences > Sidebar tab > check "CD's DVDs, and iPods".
    Also check the General tab to display on the desktop.
    Captfred

Maybe you are looking for

  • Yoga 2 Pro keyboard light

    Hi, I have a Yoga 2 Pro for just a few days. I noticed that the keyboard light is not workiing properly. Sometimes it lights up, sometimes it does not. Sometimes I can turn it on and off (fn + left space), sometimes I cannot. Once it came on by itsel

  • LMS 4.2 backup and restore

    Hi Everyone, Will the backup funciton in LMS backup the archived config, syslog messages from network device, fault history, scheduled job config, report job, etc, or it just backup the device list and credential? If I need to restore everything of L

  • Convt no number error in dynpro application

    Hi everyone, While creating vendor and customer through an interface designed in web dynpro i m getting this error in fields LIFNR for vendor and NAME1 in case of custoner can any one help.  And i have also used visible biding . The following error t

  • TestStand Improvement Whishes

    1) Get rid of the "Locals." and "Parameters." prefix from variables lookupstrings in Teststand. Since 90% of the commonly used variables in Teststand are either under "Locals" or "Parameters", it will save a lot of time getting rid of them, and in ad

  • How to launch PhotoShop Elements 10

    Can anyone help me with this? I purchased PSE 10 in June and have not been able to open it. I registered my purchase and I can see where everything is in my Program Files but I simply cannot find anything that will open it. I have been a PhotoShop us