ATV and Denon AVR

Just got an Apple TV. I've hooked it up to my home theater (to a denon AVR-4806) receiver via component and optical cables. I hooked the component cables into my DBS ports. The ATV works fine as long as I select Pure Direct as the sound mode and I get sound out of the r,l and subwoofer channels. If I try to get the sound to go to my 5.1 speaker system, the sound goes to all speakers but then I lose the picture on the TV. Anyone have a solution to this problem or is it a limitation f the current software?
Thanks

The Denon should have an auto detect mode for the optical audio data. Try that and see if that works. Still puzzling why the audio mode changes the video unless the component video inputs somehow are being switched off when you change the audio mode.
I elected to just run the component video right to my HDTV as I only have one component video source, the Apple TV. I use the Denon AVR3300 to do the audio source switching only for the ATV.
Howard

Similar Messages

Atv and denon 3806 Denon avr

Can anyone tell me how I connect the atv to my denon 3806 avr with an hdmi cable. There are 3 hdmi outlets on my receiver but I can't get it all to work. The atv works connected directly to my sony lcd tv, but the sound is through the tv and not very good. I'd like to listen to my music and watch movies with surround sound.

Thanks. So you have one too (Denon avr). I have fantasies of strangling the tech writer and designer of the remote. I am more than happy not to change anything for a while. Every time I do anything, no matter how simple, I screw it up and spend hours trying to figure out how to get it back again. I will never buy another Denon product. I don't care how many good reviews they get, or how good it sounds when it's finally hooked up, I think they are a bunch of sadists. And the manual is totally useless. And there is no number for tech support that I've ever found. The receiver is a total nightmare, even though it is working fine now. (after 3 days of torture.)

Apple TV and Denon AVR-2800

I am a total novice at setting up electronics. I think I know the answer but want to be sure...my Denon receiver is circa 1999 and has no HDMI inputs, just an optical digital audio port. This means Apple TV can't be setip to this receiver, correct?

Yvonne,
For about $35 bucks you could try this device here: http://www.amazon.com/gp/product/B002WBOQPU/ref=as_li_ss_tl?ie=UTF8&tag=wwwallab ouc00-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B002WBOQPU
It converts an HDMI to Component so you would plug your AppleTV into this device and then the device into your projection TV
By Apple policy I need to let you know that if you visit that link we might benefit or even profit from it. This is an affordable solution versus buying a new TV and you can enjoy all the cool stuff of Apple TV
http://www.allabouthomeelectronics.com/apple-tv-airplay.html

HDMI and Denon AVR-889

Hi,
I have the Mac mini mid 2011 wth the Intel HD 3000 card and it is hooked up via HDMI to my receiver then from my receiver to my Samsung TV. I have one nagging issue when switching sources, whenever I go back to the Mac mini the screen flickers like 3 times (resolution switching). If I plug the Mac mini HDMI directly to my TV it doesn't occur. What could be the cause and how to fix it? it does it on Snow leopard, lion and mountain lion. Also another irritating bug is sometime out of the blue I hear a loud white noise through my speakers and the screen flickers again, this doesn't happen often but still it's really annoying. Again, if I plug the Mini directly to the TV it doesn't happen.
Thanks in advance.

So, I guess the Mac mini only has the HDTV as its "display." So when the Devon receiver has the HDTV input switched to something else, for the Mac mini, it's like there is NO display connected. When the receiver switches back to the Mac mini, it's like you plugged in a display. That's probably why it does the flickering, because it is receiving information about what type of display just got connected and it's adjusting its output (on-the-fly) to match.
Do you have another Mac? If you do, you can try the following test... On the Mac mini, set up System Preferences Sharing pane to do Screen Sharing. Note the Computer Name shown there.
On the other Mac (assuming it's on the same local network), open a Finder window and find the Mac mini under SHARED (in the sidebar), with the Computer Name noted above. Select the Mac mini there. Over to the right, click on Share Screen, and log in to the Mac mini. The Screen Sharing app opens and shows the Mac mini's screen.
If the Mac mini is connected to the HDTV at that time, it should show the screen as it appears on the HDTV. The question is, if you do screen sharing to the Mac mini when the HDTV is NOT connected, what resolution will be shown on the shared screen... I'm guessing it will be something different than the HDTV screen resolution.
While you are doing screen sharing to the Mac mini with the HDTV is NOT connected, open System Preferences Displays pane Display tab. See if you can set it to the screen resolution to the HDTV screen resolution. That may not be possible, but if you can do it, then the resolution won't change when the receiver switches the connection, so maybe it won't do the flicker thing.

Strange problem with mac mini hdmi, denon avr 3310 and itunes

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. I hear sound on all my 5.1 speakers.
The big problem is with iTunes. When I want to watch rented series, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? Did I make a wrong configuration or is something wrong with iTunes?
Thanks in advance

Great news! My Mac mini is sending true 5.1 to my reciever through the HDMI cable! Okay so here's my list of gear.
MAC MINI 2011 2.5 i5 8gb ram
Using a quality audioquest hdmi I have connected my Mac mini to my Denon 1712 Reciever. I have connected this hdmi cable into hdmi port entitled game 2. I have connect my reciever to my tv with a monster 1000 hdx thx certified hdmi cable. It has a transmission sped of 17 gb or so...meaning it can handle transmitting 3d...if only I had a 3d tv.
Okay so that's the gear. Now onto the changes in audio midi. Open audio midi and Simply change it to 48000 hz and to 2 channel 16 bit integer. That's all I did and now it works. Before I had it set to 8 channel 24 bit and when I pulled up my surround sound options I could pretty much only get multi channel stereo. Now I can get several Dolby choices.
The voices are coming out of the center speaker and all the action is coming out of the other speakers....so in other words 5.1 surround sound has been achieved on my Mac mini 2011 which has Lion on it.
I have tested this with iTunes and Netflix. Both are in 5.1 and sound great. In iTunes I have tested both music and digital copies of movies. Both worked flawlessly.
Rejoice Mac mini owners 5.1 surround is now possible over your Mac mini 2011 edition with just an hdmi cable to your reciever. You can throw away that toslink cable becuase now you don't need it!
I hope this works for you. Remember not all hdmi cables and the same holds true for your reciever. If it does not work consider getting either audioquest or monster....everything else is junk.

54GS ver2 DHCP and static Denon AVR IP

I have a WRT54GS ver2...older model. Some models have DHCP Reservation that allows the same IP to be reestablished with the connected wireless device. This model does not have that....wish it did. I need to get the same IP with my Denon AVR (audo video receiver) each time.
Ok, So my 54GS is setup for DHCP 192.168.1.100 with 7 connections. Only using 5 of these.
If I set an IP in my Denon AVR with a static IP of 192.168.110 (outside the .100 to .106 range) and the Gateway is the IP of the 54GS, Sub, DNS1, 2 as for my TCP/IP connection....then I should be able to connect to the router and dsl modem......I am unable to get the Denon to connect?
The Denon is connected via a wirless bridge..Buffalo Ethernet Converter that uses DHCP to connect to the 54GS. Does that mean I can't use a static IP in the Denon that connects hardwire to the Buffalo?
How to get the Denon to see the router?
Linky54GS
Message Edited by linky54gs on 03-11-2008 02:36 PM
Message Edited by linky54gs on 03-11-2008 02:37 PM
Message Edited by linky54gs on 03-11-2008 02:37 PM

The puzzle continues.........
I have the Router Gateway IP set at: 192.168.100.100
The DHCP server in the router is setting: 192.168.100.101-.103
I have the Denon IP set: 192.168.100.121.... will not connect to the Internet...does connect to the network.
I have a DirecTV IP set: 192.168.100.120......connects to the Internet and network.
Why the Denon will not connect to the Internet is the puzzle, especially since the DirecTV is connected via the same bridge and using the same IP setup as the Denon. I tried UPnP on/off...no difference.
The Denon and DirecTV are both connected to a Buffalo Air Station (wireless Ethernet Converter). Same ports, connections as with DHCP in use and working.
The DirecTV IP is set at 192.168.100.120; the Denon 192.168.100.121.
Gateway IP, Subnet Mask, DNS, all set the same in both. All other sources use DHCP in the .101-.103 range.
DirecTV connects to Internet....Denon NO.
Both work when using DHCP via the router just fine. Just wanted a static non-changing IP in the Denon for use with FW updates/issues.
Stumped!

Denon AVR-1909 and Apple TV reverting back to 720p

I have my Apple TV running through my Denon AVR-1909 amp (HDMI). If both units are off and I start them up, my Apple TV reverts back to 720p resolution. The resolution before I turned off the Apple TV is set to 1080p.
It wasn't until I ran the Apple TV through this Receiver did I start experiencing this problem.
If the receiver is already on, then the resolution on Apple TV remains at 1080p when I turn it on.
I'm using a Harmony One Remote to Turn on my devices. I have setup the functionality to Start the receiver first, then I have a created various delays before it starts the Apple TV, thinking that the amp needs sometime before it sends a signal. Even with this delay, the problem still exists.
Is anyone else experiencing this issue, and is there a fix?
Any help would be greatly appreciated.

Welcome to the Apple Community.
Contact the developer of the Air Video app.

Denon AVR-X1000 and Apple TV

Does Denon AVR-x1000 cooperates with Apple TV 3rd generation perfectly?
Is someone tried that?

Search the forums or google and find out for yourself.
Do you have a specific issue?

Apple TV to Denon AVR-887

I have a Denon AVR 887 and I would like to figure out how I can use the ATV. The Panasonic TV Monitor is a great distance from the AVR so the Video is from Component Connections. Audio is from sperate speakers mounted around the Panasonic TV. The AVR will not convert the HDMI from the ATV to the component output.
Is there a conversion cable or box that can take the HDMI from the ATV to a componet output for the AVR?
Will I also need the Optical digital audio output cable to get the audio into the system?
Happy New Year.

Yvonne,
For about $35 bucks you could try this device here: http://www.amazon.com/gp/product/B002WBOQPU/ref=as_li_ss_tl?ie=UTF8&tag=wwwallab ouc00-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B002WBOQPU
It converts an HDMI to Component so you would plug your AppleTV into this device and then the device into your projection TV
By Apple policy I need to let you know that if you visit that link we might benefit or even profit from it. This is an affordable solution versus buying a new TV and you can enjoy all the cool stuff of Apple TV
http://www.allabouthomeelectronics.com/apple-tv-airplay.html

Macbook Pro with Denon AVR-X3000 / sound problem

Hi there..
I have a retina macbook pro and I am trying to connect it to Denon AVR X3000 surround receiver via. HDMI
Denon is connected to the TV from HDMI out, so I have no problem with sending the video to the LCD via. receiver.
My problem is with the sound modes.
Normally, as the most basic example, when I connect my Apple TV to Denon and LCD with the same HDMI way, I get all the digital sound modes such as Dolby Prologic II, Dolby True HD, DTS: Neo6 etc..etc... And I get a very quality sound, with all the channels seperated etc.
But when I connect my Macbook Pro to the system with the same way, what I can only get from the receiver are : STEREO, MULTI CHANNEL IN, MULTI CHANNEL STEREO and VIRTUAL.. I do not see any DTS, Dolby Digital, etc.
Also, I can only get the "surround effect" from "MULTI CHANNEL IN" sound mode, but this time the audio quality is really bad...
Tiny Apple TV gives me great sound but MB Pro cannot..
I have tried to change some settings from the AUDIO MIDI setup, I chose 5.1 multi channel but nothing happens from here...
By the way, I am using Mac BluRay player and I am running bluray films from my computer.
In my opinion, MBP cannot send high definition video and dolby-dts-prologic sound to the receiver at the same time..
I don't have quite experience about this issue, maybe it is something, very simple. But I couldn't manage it.
Maybe MBP is not capable of doing this... If so, I will be really disappointed because I was looking forward to purchase a Mac Mini and use it as a HTPC..
All suggestions, recommendations are highly appreciated... THX

Hi, i don't have a solution but i can share my experience with you which is similar. Mac Mini connected to Denon. On Mavericks OS btw.
two things.
1. i was fiddling with the System preferences at one time, under Sound, playing around with the output options, honestly forgotten what i did but i managed to get into all the options as per normal, such as Dolby Cinema. Problem is, once i restarted the Mini, the same problem occured. Only those as u mentioned, Multi IN etc.
at this point, i am still trying to figure out.
2. I tried switching to windows, and the problem disappear. Meaning, the sound mode options are as per usual.
u have any luck yet ?

Apple TV 2/ Denon AVR 2311CI zone 2 issues

I have an original Apple TV hooked up to my Denon AVR 2311CI ss receiver. I needed to hook the red and white RCA cables to pass an analog signal to get the audio to pass through to zone 2. The next gen Apple TV has no RCA jacks, just digital optical. That does not pass the audio to zone 2. Has anyone tried this and got zomne 2 audio to work with the newer Apple TVs??

I am also having this issue (picture - but no sound) - but with an Onkyo AV Receiver (TX-SR674). And unfortunately, my TV doesn't have HDMI - just DVI - so I can't pass the AppleTV through my TV to get the audio to the AV receiver - or even get the audio from the TV's speakers. So unless I can firgure this out, I either have to return the Apple TV, or buy a new TV and/or receiver. As much fun as that sounds, I don't really have the spare coin to make it happen. I've tried every possible setting on the Onkyo (which I use with a DirecTV receiver and a Sony Blu-ray player just fine - using HDMI) - but no luck. The only way I've seen it work is using my Dell computer Monitor (which has HDMI in and analog audio out). So it doesn't appear to be a defective Apple TV. Oh - and I can't get any digital audio out of the Apple TV either. I tried two different AV receivers that have optical tos-link inputs.
Any help is greatly appreciated!
Cheers (and Happy New Year).

Denon AVR 1709

I cannot get Apple TV to work through my Denon AVR. Is this a common problem as I have now heard that there maybe compatibility issues.

Welcome to the Apple Community.
Connect the Apple TV to the TV directly temporarily to eliminate any possibility the problem lies with either of these devices.
Check your Denon manual to make sure that any port mapping has been carried out properly.
Try powering up the devices in different orders, the Apple TV may not turn on if it is unable to detect a supported TV.
If necessary you will have to connect the Apple TV and TV directly and connect the receiver to the Apple TV by optical cable for audio.

How do I stream itunes from my time machine via windows XP to a Denon AVR 1707 via Airport express?using

I am trying to play music to a Denon AVR 1707 bought in 2006. It has an ipod 3.5mm jack in back. I bought a Denon wireless ipod docking station that plugs into the 3.5mm jack and red&white rca jacks + s video. It plays when an ipod is docked, but think it's crap as I can't share from my time capsule, ipad, iphone or ipod or touch wirelessly. I have windows xp with a Time Capsule and the wired a second hard drive for itunes music and pictures. I have an Airport express that works to my alarm clock, HOW do I make this work on the Denon? Thanks for any help!

I just got off the phone from Denon and was told the 3.5mm jack is just to run a remote control for their equipment not a digital input jack. Denon said to get a 3.5mm to rca splitter and that should work. If this works I just need to figure out how to share from my Time Capsule to my ipad. Any feedback is helpful. Thanks.

ITunes does not see Denon AVR-3311CI

I updated Firmware and added the AirPlay feature to my Denon AVR-3311CI. Called Denon support. Denon says that Airplay is loaded. They verified this by having me go to 'Add New Feature' and if the Airplay option doesn't appear, I was told that means that Airplay is loaded. When I launch iTunes, iPod Touch, or iPad, the 3311 does not show up as a device nor does the AirPlay icon show up in the bottom right corner of iTunes. I have File Sharing turned on the Macs. The Macs can all see each other. Macs & 3311 are hardwired to same router. iPad & Touch use Wi-Fi obviously. Router is a Linksys WRT54G. Any suggestions would be appreciated.

Here's a few things you can try:
- If you haven't tried disabling your anti virus software and turning off the Firewall, do that then restart your PC and the iPod.
- Try another cable to make sure it's that that
- Try connecting to another computer to verify that your computer is not the issue
- If none of these work then your iPod might need service. Take it to your nearest Apple Store

Uverse input on Denon AVR not providing audio

I have my Uverse DVR connected via HDMI to my Denon AVR-X2200 connected to my TV via HDMI. When switching through several stations quickly on SD channels, I get no sound. This does not occur when going through HD channels.
I have already tried rebooting the box, I have rebooted the box and gateway, I have tried setting the resolution to 720p and I've tried turning off Dolby Digital, none of the above has helped. I know this has to be an issue with the uverse equipment as none of my other inputs are having this problem. The uverse boxes are Cisco boxes, I'm having issues with the main DVR as well as the satellite boxes. I have no intention of using optical and component cables as I'm not paying for the service so that I can view things in a sub-par environment. Component video is awful.
Is there a solution to this problem, or do I have to buy older equipment just to handle Uverse's equipment?

Just because your audio doesn't go over HDMI doesn't mean your picture has to not use HDMI, and it should also be noted that Component may actually give you a better picture than HDMI.
So... why won't you use optical for audio?
Also, since this is SD channels, which are stereo only, you could use the L/R audio cables for that, though switching the amp between the stero inputs vs the HDMI for HD could be problematic. Optical wouldn't have that issue

ATV and Denon AVR

Similar Messages

Maybe you are looking for