ATV and Surround Sound Speakers

Hi gang,
I'm looking to hook up a surround sound system and I'd like to have it so my iPod/iMac/iPad can wifi play over the sound system. I've got a Samsung Plasma TV with the following things hooked up:
- Current gen Apple TV
- PS3
- Wii
- Comcast DVR
- Sony DVD player
I'm thinking I just need something that runs from the TV to the surround sound speakers, but not sure about how to play music by wifi through the speakers. I'm no tech wiz, so I'm looking for an out of the box solution if at all possible. Any thoughts / inputs?

Unless the TV has the option to output surround sound to a receiver (most don't) you would put the receiver in front of the TV in the chain and have all your other devices feed into the receiver, using the receiver to switch inputs to the TV rather than the TV itself.
Your current Apple TV would take care of all the streaming from your iPod, iPhone and iMac.
When considering a receiver take account of all the inputs you require as a result of all the devices you wish to play through it.

Similar Messages

Optical audio and surround sound speakers for my Mac Pro

In the back of my Mac Pro there's an in and out for Optical Audio. What is this and are there any surround sound speaker systems out there that will plug into it? Most surround sound speakers seem to require a PC-style triple-input, with three jacks (Green to front, Orange to centre and Black to rear channels). Very few surround sound systems have the additional option for a single headphone socket-style jack, and I'm not sure if they will work terribly well with this single connection.
Can anyone recommend some speaker choices, particularly in the UK, that will give me good surround sound from the optical audio or single headphone jacks? Many thanks.

You might want to look at a device called the Griffin FireWave: [http://www.griffintechnology.com/products/firewave]
It connects to your MacPro via firewire, and has the green/orange/black jacks out to a standard 5.1 speaker system.
It comes with a software application that lets you customize the sound, and also synthesize surround from mono, stereo, etc., sources.
It would definitely open up your choices for speaker systems. I'm using one with a Klipsch 5.1 Promedia set of speakers. Works and sounds great.

Using sky go from Mac air to TV and surround sound speakers

I have skygo, and want to watch it on my tv through HDMI cable, can I use logitech surround sound pc speakers too somehow?

As your TV has HDMI inputs which will support sound as well as video, use a MiniDisplay port to HDMI cable (Mini DisplayPort to HDMI Cable by Cablesson works great) or a MiniDisplay port to HDMI adaptor and HDMI to HDMI if not. Just make sure the adaptor supports audio as well as video. Just select HDMI in the Preferences Sound
And yes, you could use your surround sound speakers via the 3.5 mm headphone jack, just make sure you select this option in Preferences Sound if you're not using the HDMI for sound

How do I connect Apple TV and surround sound to my projector?

My current set up is that I have a projector connected to my Blu-Ray player. My surround sound speakers connect to my Blu-Ray player. They all came in the box together and the speaker wires all go into the Blu-Ray. Everything works perfectly.
However now I have bought an Apple TV and although I can play it through the projector, the sound is only through the projector and not the surround sound. I tried plugging the Apple TV in the HDMI in the projector and then connecting the Apple TV to the Blu-Ray via optical cable, but that didn't work.
In the back of the projector there is 1 HDMI port and an audio port but no optical port
In the back of the Blu-Ray, you have the speakers, the HDMI, the audio in and the optical port.
How can I connect everything so that I can use my Apple TV with surround sound?

The manual doesn't say anything an optical port on the BD ?

Connecting my MacBook Pro to my DVD Surround Sound Speakers?

I'm a student filmmaker in the UK and pretty much do all my video editing from my bedroom using Final Cut Studio. I am using a MacBook Pro3,1 (bought in 2007) and have recently decided that I want to start working in 5.1 surround sound.
As I have no surround sound speakers with my MacBook Pro, I was wondering if it would be possible to connect it up to my DVD surround sound system? This would ultimately save me having to buy a compatible set and having two lots of surround sound speakers around my room...
My DVD player is a Panasonic SC-PT150. The 6 surround sound speakers each connect to it through the standard +/- "clip-in" wire set up (which, obviously isn't compatible with my MacBook Pro). There are also two AUX sockets (one for Left and one for Right) on the back of the DVD player. So far, I have tried connecting my MacBook Pro to these sockets using a Mini plug to RCA cable, however, all I get is an incredibly loud humming noise.
Does anyone have any suggestions as to how I might, either overcome this problem or, get the setup to work another way? Thanks in advance for your help.

Thanks both of you for your help.
It doesn't mention either of those connections in the manual, however, yes you are right, it takes digital input. I'll have to call and check if the toslink cable is compatible.
I tried connecting the mini-stereo-to-RCA cable to my Nokia phone (which is actually where the cable came from) and that plays through the DVD speakers just fine, when i select AUX mode. Although, as you said, it only plays stereo.
Say the mini-toslink cable is compatible, would I need to get a 5.1 surround sound card for my MBP?
Thanks again.

Why do Creative no longer make Surround Sound Speakers?

It's been years since Creative made any high-end surround sound speakers. Why has nothing new come out in the meantime? No 7.1 speaker systems or 5.1's in absolutely ages.
Can any Creative Rep tell me if Creative will be making 7.1 speaker systems with Digital Optical inputs or are you guys just gonna stick to producing 2.1's and 2.0's from now on?

But is there any reason why Creative stopped making high-end speaker systems? Was it no longer lucrative enough to produce them?

Surround sound speakers don't work help

I recently bought a new sony bravia t.v. and a sony all in one blu-ray disc/dvd all in one home theater system. We cannot get the surround sound speakers to work watching regular television. Can anyone help solve this problem? Any help is appreciated, Thanks, Ken Please write to {Removed per Forum Guidelines}

JUANGONZ is correct. The easiest way to get the surround is to take an optical cable from the cable box to the input on the back of the Sony receiver. You will have to change the input on the Sony to digital in. Make sure you have Dolby Digital enabled on the cable box settings. Also important is that most standard definition content is broadcast in stereo, usually only high definition is broadcast in 5.1 surround.
If you can stop in at your local Best Buy, I am sure they would be happy to show you on a display unit, or setup an appointment to have a Geek Squad Installer connect your components if you would like.
Justin
++++++++++++++++
Although I am an employee of Best Buy, my comments and opinions are my own and do NOT necessarily reflect the opinions of the Best Buy Company.

5.1 surround sound speakers

I have these Logitech 5.1 Surround Sound speakers and it would be +really nice+ if I could hook up my Santa Rosa Macbook Pro to them. The speakers have three input cables, and the Macbook has one. What kind of converter would I need?

I've read this because I have a Z-5300 (Logitech) 5.1 speaker set, and I want to hook it to my MBP. Of course, only having the 1/8mm audio and the digital out - we have a predicament. How to get 5.1 sound from a stereo jack. In the above post, the soundblaster USB audio device is recommended - however Creative doesn't support OS X 10.5 - in fact no Mac OS at all. Will this device work for me, or is there a better device sub $100 that will do the job for me? I'd love to have my speakers hooked back up - and don't want to get a different set, but will if I have to .... please advise.

5.1 Surround Sound speakers not working since 7.1 downloaded

I'm not sure what is causing it...But I cannot get my surround sound speakers working with ITunes since I down loaded 7.1. They all work with Windows media player. Is therre any setting I should be aware of?
Dell Dimension E510 Windows XP

I have the same problem and it is driving me crazy. I have an older logitech quadraphonic Z-560 speaker system that I love and have been using for years with never any problems, until I installed Itunes 7.
At first after the upgrade I was completely unable to play any file at all, which was later resolved by updating my SoundBlaster live Audigy card drivers. Now I can at least listen to music but only out of my front 2 speakers. I also noticed my QuickTime player does the same thing only playing out of the 2 front speakers. The issue only exists when trying to play audio through these 2 programs.
I have read all the posts on this issue that I could find yet have not been able to resolve it. I changed all the QuickTime, and creative settings appropriately for my hardware and no luck. I'm running the most current version of divers on windows XP with SP1.
Is it simply an incompatibility issue with my sound card?
PLEASE HELP with any advice!!!
Windows XP Pro

HT6067 How can I connect 5.1 surround sound speakers to my Mac Pro?

How to connect 5.1 surround sound speakers without a receiver to my Mac Pro, so I can test and hear surround sound files I am creating?

As far as I know, the only way to do that is with the digital out, toslink I believe(1). . Currently there are very few external usb soundcards that are known to work with Mac and produce 5.1 sound, perhaps Diamond Multimedia or Zalman?. Analog surround really doesn't work (green, yellow, black cords)*. So, maybe, Garage band/VLC? or the dvd player might be the only things I know that could produce 5.1 sound, but I could be wrong.......
(1) You will need a speaker set with an optical input...
* maybe try this--i think it's called an " HD audio rush " box and it converts digital to analog audio 5.1 supposedly-, you can look on ebay for similar things
sorry I couldn't be of more help
John B

Surround Sound speakers don't work with ITUNES 7

My surround sound speakers have worked with my computer since I got them and still are working. However, when I upgraded to ITUNEs 7 suddenly only the front speakers work, this only happens on ITUNEs and nothing else. What is going on and how can I fix it?

My surround sound speakers have worked with my
computer since I got them and still are working.
However, when I upgraded to ITUNEs 7 suddenly only
the front speakers work, this only happens on ITUNEs
and nothing else. What is going on and how can I fix
it?
I have surround sound speakers and mine are working fine with iTunes 7. Now, I don't want to state the obvious, but my surround sound speakers have a bass box attached and the leads go into the back and sometimes they come loose. You've probably already checked this but I thought it worth a a mention.

AirPlay and surround sound

Hi, set up my apple tv . I have managed to get everything working ok but when I use the AirPlay option I cannot get my surround sound to work, it only comes thought the speakers on my tv. My current scary lead goes from my sky tv box to the DVD player that has the surround sound. However, when I set my scary from tv to DVD p,Ayer there is still bNo surround sound- do I need ton change a setting?
Thanks

I have no idea what your current setup is, despite your brief description. Go back a few steps to 'troubleshooting 101'. If your using the HDMI only, your ATV will output audio to whatever device the HDMI is connected to (uh, your TV?)
If you want audio sent to any other device, you must use the digital optical connector. It is always active, so no changes in your ATV are necessary - just hook the optical cable to your surround receiver, configure your receiver to work with the optical input you have the ATV connected to, and it will work.

Not able to get the sound from my tv to come through my surround sound speakers

I have a new Samsung 46" tv and a new yamaha receiver also a new Samsung blu-ray player. I currently have an HDMI cable going from my tv to my receiver and a short HDMI cable going to my Blu-ray player and the old style red and white rca cables from my tv to my receiver. The surround sound works great when playing the blu-ray but no luck when watching regular tv. I have tried to change the tv speakers to external speakers but all is silent when i do that. I have read on the other post of similiar problems and the solution seemed to be using an optical digital cable. I have also read on prior post that i should be able to accomplish this with just the HDMI cable. I do not have a cable box only a cable line coming into the house and straight to the tv. Do i even need the rca cables?

When i purchased the equipment from best buy i told them what all i was trying to accomplish and this is the exact way i was told to make the connections keep in mind i know nothing when it comes to electronics so i wrote the instructions from the salesrep word for word. Here is what I have. My tv is located on one side of the room and receiver and blu-ray on the other about 25' from each other. I have regular cable coming to the tv and I have an HDMI cable coming from HDMI (DVI- IN) on the tv to HDMI(OUT) on my RX-V367 receiver. the i have a short HDMI cable going from my receiver (HDMI/DVD) to my blu-ray (HDMI out). My RCA cables came into play when I told the rep. that I wanted my tv sound to come through my surround sound. He said they did not have a digital optical cable with a length of 25' to reach from tv to receiver so I would have to use RCA cables and to connect them from (audio component IN) on my tv to (AV OUT) on my tv. The input on my receiver when watching tv in on HDMI 1.

Audio - connecting surround sound speakers to mac mini

I have a PC surround sound sytem, 4 speakers and a subwoofer, that I would like to connect to the Mac Mini. There is a left and and right cable that I previously plugged into my computer's sound card.
Any suggestions as to how to connect the speakers?
mac mini

Hi there,
First of all, which Mac Mini do you have? A G4 or Intel? Does your PC surround sound system accept a digital input?
From gathering what you wrote, if the speakers only accept a left and right cable, then it is not a true surround sound system. You'd simply need a cable that splits the sound system into the left and right inputs such as this:
http://www.radioshack.com/product/index.jsp?productId=2103865&cp=&origkw=audioy+adapter&kw=audio+yadapter&parentPage=search
Hook this up to your audio output (or headphone jack) and you are all set for stereo output only.
Mini 1.42GHz Mac OS X (10.4.8)

Connecting audio channels with surround sound speakers

I have an art project coming up and I was wondering if anyone could help me. I have made a film with a separate .aif sound recording to go along with it. I want the sound to play from different speakers at different points, I have a surround sound system I was hoping to use and thought it might be possible to cut the sound files and somehow place them in different audio channels to link with different speakers. Would this work or is there another way to get the same effect?

I've not personally done it yet, but the theory is sound. I'd expect it to work just fine.
In any event, you'll know for sure once you try.

ATV and Surround Sound Speakers

Similar Messages

Maybe you are looking for