ATV died after updating

I have a brand new ATV, was setting itt up to my TV and network and iMac, and everything worked fine.
Then I selected update, and it took a looong time but finished in the end after more than 30mins (I have a download speed on my network around 40MB/s).
But after updating the ATV box just died, the LED is completely off.
Yhen I tried reboot with power cycling, and after there came a screen picture wich I interpreted as I need to connecting with the USB cable - and I am not able to do anything with thw remote or anything. I do not have this micro-USB cable - any suggestions anyone?

Sadly, you need to get the micro-usb cable to get the Apple TV to work again. It happened to my Apple TV 3, and I had to run down to Radio Shack to buy one. It was about $13 for the shortest one they had, but it ended up working and restoring the unit once you plug it in to your computer. That's better than going out and purchasing a new Apple TV for $99.

Similar Messages

  • Apple tv completely died after update

    apple tv completely died after update, not even light on. its brand new.

    Take it back and get another.

  • My iphone4 died after updated ios 5.01.

    My iphone4 died after updated ios 5.01. Yesterday, when I charged my iphone, iturn showed new software update. I clicked "update".After finished update,my iphone show the apple log only. I couldn't turn on and turn off my iphone. The iturn can't recognize my iphone.Who can help me to solve the problem. Thanks!

    The iphone is designed to be synced to your computer or cloud service regularly.  Your contacts will be in whatever program/service you have chosen to sync.
    If you have failed to sync your contacts then they are likely gone.
    You can try restoring from backup.
    You should be transferring any purchases made on the iphone to your computer regularly.  Just sync them back.  if you have failed to do this, then redownload them:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • SmartWatch 2 died after update with Sony Update Service

    After problems with Call Handling app after update of my xperia z ultra to Kitkat 4.4.4. I was told by support to repair my firmware using PC Companion. It didn't help. Afterwards I was instructed to update my SW2 firmware with Sony Update Service (SUS).
    I downloaded SUS and installed on my PC and followed the instructions. It said that the SW2 already has latest version. I clicked continue and after 40% it failed saying that there was an error with connection click retry or contact support. I tried several times - all attempts failed.
    After I tried turning on my SW2 but it was dead. And any other steps didn't help to turn it on.
    Nearest Service center is in Moscow, I live in Astana, Kazakhstan. So I am not even sure if they can help us even if I spend my time and money to take it there.
    So the bottom line is - never use SUS to update your watches, folks.

    ello everybody
    The problem is solved by Sony
    You will find an update for smartwatch 2
    This update will solve our problem
    Have fun

  • My apple tv died after update

    Black screen and white light flash slow on appletv??

    Similar problem: Said yes to an update; after update only Computers and Settings logo on screen, updated again via traditional iTunes method and got everything back except for Settings. Anytime I select a specific settings menu such as "General" screen goes black.  Can only get back to main menu by pressing menu key on remote twice.   Lesson learned: only allow an update if there's a major upgrade offered by Apple.  They just don't test these updates thoroughly enough before releasing. 

  • My 5800 is died after updating the software

    Guys,
    My 5800 was working smoothly with the older version but now when i updated to the new version my phone is died. It doesn't gives any response. I removed my battery and memory card and switch it on after 5 mnts.But its not giving any response. Do u have any idea on this. 

    According to this:
    http://support.apple.com/kb/HT1937
    Softbank does not offer unlocking of iphones.
    Your iphone is carrier locked to Softbank and cannot be activated with any other carrier in any other county.

  • Broadcom wireless died after update

    I just did a system update a little bit ago and upon rebooting my wireless wouldn't work.  It's a Broadcom 4311 internal card on my laptop.  It worked fine before the update, and I used the bcm43xx-fwcutter method from the Arch Wireless wiki tutorial to get it set up.  It's been working since I installed Arch, which was right after Voodoo was released, so almost 6 months.
    I tried to do:
    rmmod bcm43xx
    and then reinstall through fwcutter, but that did nothing.  The weird thing is, I can iwlist eth1 scanning and it shows my wireless connection available. iwconfig eth1 essid "myConnection" mode Managed doesn't help, either, it just accepts it and does nothing.  I know my wireless/internet is working still because my girlfriend's connected to it wirelessly.  It's also working fine on my big pc and on the ethernet port on my laptop.
    I haven't changed anything in my rc.conf or network profile that would make it stop working:
    # /etc/rc.conf - Main Configuration for Arch Linux
    LOCALE="en_US.utf8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Canada/Pacific"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    MOD_BLACKLIST=(pcspkr ipv6 sd_mod sr_mod)
    MODULES=(b44 mii speedstep_centrino fglrx bcm43xx ac battery button fan sbs video)
    USELVM="no"
    HOSTNAME="slaptop"
    lo="lo 127.0.0.1"
    #eth0="dhcp"
    #eth1="dhcp"
    INTERFACES=(lo)
    NET_PROFILES=(ethernet linksys bitey)
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    DAEMONS=(syslog-ng network netfs @crond alsa fam @kdm hal @cpufreq @acpid @powersaved @samba @keytouch)
    # End of file
    network profile
    DESCRIPTION="Wireless"
    # Network Settings
    INTERFACE=eth1
    HOSTNAME=slaptop
    # Interface Settings (use IFOPTS="dhcp" for DHCP)
    IFOPTS="dhcp"
    # Wireless Settings (optional)
    ESSID=linksys
    #KEY=
    IWOPTS="mode managed essid $ESSID"
    I suspect the the update from Dhcpd or the new kernel 2.6.22 to be suspect.  What can I do to fix this, and has anyone else had the same problem? http://bbs.archlinux.org/viewtopic.php?id=36115  This looks like it may be the same problem, or something similar.
    Any help would be appreciated!

    after some updates a while ago i have had to use wifi-radar with 'Ifup required' option in preferences ON. or else it wouldn't connect...

  • My iPhone 4 died after updating to the new software

    Hi all,
    I was just wondering if this had happened to anyone else, two days ago i tried to upgrade my iPhone to the new software, 4.2, and my iPhone literally died on me! Now all that appears on my iPhone's screen is the connect to iTunes sign. When i do connect it, a message comes up saying my iPhone is in recovery mode and needs to be restored. Unfortunately though every time I try this the restore fails. I have called apple support and now have to go up to the Apple Store in Sydney and get them to give me a new phone. As i said above i was wondering if anyone else has ever had this problem.
    Cheers

    Diego_Onofre wrote:
    Hey ! Today I tried to make the update for my iPhone 4 and it died. I get the same type of message your getting and nothing will make it respond or set it back to the normal settings. Did you call apple? did you get a new phone? were you able to fix it? I'm really disappointed on apple and iphone.
    if you were to read the ops original post he said hes getting a new phone....

  • Ipad 2 die after update

    Hello everyone
    After I updated my ipad, it become black and only have apple symbol.
    How can I fix it now?

    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

  • IPhone 4S: Wifi died after update to iOS 7.0.x

    I updated to iOS 7.0.x some time ago which broke my Wifi. Apparently, the apple store in Australia told me that I had to call Applecare since I picked my phone up in France; but there's no way of getting in touch with them through phone nor chat without paying. How would I go about doing this?
    I feel a bit annoyed by the fact that hardware is working fine and software killed it. What does that have to do with my expired hardware warranty?
    Anyone else in a similar situation? Would be interested to know how you resolved it.
    Thanks,
    Johan

    Hi there,
    I actually went into my local apple store and had an appointment in the genius bar.
    They did a reset by turning my phone upside down and pressing down the button on the table.
    The button seems to be permanently stuck but everything else is functioning now.
    They added a new "off button" to the screen through general setting.
    So now I lock the screen or turn off the phone with this digital button and not the actual hard button on the top.
    In a couple weeks I'll probably order a new phone, until then hopefully this will last.

  • Firewire died after update

    I recently installed the update for iMovie and suddenly my sony dcr-hc38 can't import anymore. Apple profiler can't list devices attached to firewire port, although I tried with a new cable and camera seems to see the cable on its end. The network control panel says firewire is not connected and that I should configure it, but I'm not sure if this will help as it seemed to work fine before without me having fuss around with a dns server. I'm not doing anything differently than before, I only have one fw port and one fw device, to keep things simple. I've also read the Apple guides to firewire troubleshooting, disconnecting, reconnecting, unplugging, replugging, zapping pram and none of it has helped. It's a long trip to take it in for repairs (I live in the sticks, yes) and my resources are limited so if anyone has any advice on what to do to narrow down the problem, I'd be grateful.

    I've read about these problems.  When I turn on hearing aid I get a picture of a hearing aid on my status bar.  Has this changed?  Or did it just happen when the ota was received?  Just wondering how one wouldn't know that it was enabled.

  • IPod died after update

    I plugged my iPod 15G in to my computerto sync it up. A window popped up in iTunes that said my iPod's software was out of date. I clicked the "run update" button as directed. It finished updting and said to disconnect from PC and plug into power source to finosh and do a firmware flash. When I unplugged my iPod from the PC, it was dead. I plugged into the AC outlet to like it said and still nothing happened. I tried all the restart actions, and still nothing. My iPod was fully charged nd working fine until the updater did its thing. What do I do now!!??

    Let it sit for 24 hours then reconnect it to the computer and let it charge for at least 30 minutes. Then reset it and see if your computer/itunes sees it. If so, Restore it and this time don't disconnect it prematurely.

  • Mic died after update?

    Problem solved!  Go to settings and turn off hearing aid.

    I've read about these problems.  When I turn on hearing aid I get a picture of a hearing aid on my status bar.  Has this changed?  Or did it just happen when the ota was received?  Just wondering how one wouldn't know that it was enabled.

  • Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Did you have the phone set to backup things to the One Drive on Microsoft servers?

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

Maybe you are looking for

  • Web Service  - ESR

    Bom dia. Necessito fazer duas integração (no Xi e no PI) com as seguintes configurações: <-----(RFC) - <---(WS)--->  integração no cliente A. <-----(RFC) - <---(WS)--->  integração no cliente B. Sendo que a RFC é a mesma nos dois clientes e o também.

  • Exporting Crystal Report to Excel Data Only Fails On Demand in Infoview

    I am having the following problem with only 1 report in Business Objects.  The report runs fine in Infoview, but the Excel export fails after around 5 minutes.  It exports fine when scheduled.  The reports is over 3,000 pages of data and comes in at

  • I want to know how to use my domain name in business catalyst

    please I want to know how to use my domain name in business catalyst

  • IDoc error :'Message has error at outbound side'.

    Hi Experts, am working on JMS-->IDoc, where TIBCO sends MBGMCR01 IDoc to ECC through XI . in SXMB_MONI : shows red flag in outbound:with the message as 'Message has error at outbound side'. please, suggest  to solve the issue. thank you, <b>MK</b>

  • When running full screen apps - dock is slow, difficult to appear

    This is on a new MBP with an additional external monitor.  The primary display is still the laptop display.  When apps are in full screen, simply bringing the cursor to the bottom of the screen does NOT bring up the dock.  I have to continually pull