ATV doesn't show iTunes playlists and doesn't play them using the Remote app

Hello
Using ATV3 with the latest software version and it is connected to the iTunes library (also latest version) on my Mac Mini.
When I go to Computers on the ATV I can see the content of the iTunes and am able to play both Music and Vidoes however I don't see the playlists on iTunes there. On the ATV configuration it is configured to Show playlists -> All but still no Playlists appearing at the top of my movie and TV show listings section.
When I connect to the ATV using the Remote app on the iPhone and go to Computers there I do see the playlists but unable to play the ones with Vidoes just music.
Any ideas what would cause these problems...?

log into my library through more > computers where? on the Remote? This is exactly what i'm doing, I can see the content of my library there but I can't play movies from there.
Re: ATV doesn't show iTunes playlists and doesn't play them using the Remote app 

Similar Messages

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • I used to able to access and listen to my itunes library from my ipad using the remote app but this no longer works.  I am connected but sound thru ipad.  Is this because of they want us to use itunes match

    I used to able to access and listen to my itunes library on my ipad  using the remote app but this no longer works.  I am connected but sound thru ipad- just controls my library on iMac.  Is this because of they want us to use itunes match

    That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
    To play for example iTunes imusic on iPad
    You need to have Home Sharing On.
    Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
    Start iPad's Music app, tap the ... More (bottom right), tap Shared.
    Choose your iTunes' library and have fun.

  • Music  does not play on Iphone when using the Remote app for Itunes , is this normall.

    Hi all,
    I am using the remote App for ITunes on my IPhone 5,I can get the phone to operate
    ITunes perfectly but there is no audio coming from the phone, I am having a party and I
    want to play the same playlist  throughout the house without having it up at full volume.
    I was hoping to leave the laptop downstairs and plug the IPhone into a stereo upstairs.
    If this is normal ...........
    Is it possible to load the playlist on to 2 computers , and have them playing the same music
    simultaneously.
    Any suggestions please

    See http://discussions.apple.com/thread.jspa?messageID=9926596

  • HT1947 Can I use the "Remote" app to turn the Apple TV on and off?

    Can I use the "Remote" app to turn the Apple TV on and off?

    Welcome to the Apple Community.
    The Apple TV doesn't switch on and of, it goes to sleep and wakes up, but yes you can perform these actions using the remote app.

  • HT1947 After updating My Apple TV to 5.1 I can browse music library using the Remote app on my iPhone and iPad but cannot select a song to play. Is someone else having the same problem?

    I have updated my Apple TV to 5.1. Using the Remote app on my IPhone and iPad I can browse the music library on the Apple TV but I cannot select a song to play. Has someone else the same problem?
    Mats

    I think I found the reason. On my iMac that is hosting the music library a song already was playing. This seems to block out me from selecting another song though my Apple TV.
    Mats

  • TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • How to not have songs duplicates in app remote? I have playlists for my iphone and playlists for my pc. All songs of my iphone are also on my mac. When i use the remote app, it plays everything in double.

    Dear all,
    I am using itunes to control all my music and i like to use my iphone, or my ipad to control my music with the remote app.
    But i have a problem: all the music i have in my iphone count as double play.
    To explain everything since the beginning, i personally don't like and don't trust at all the music sync capability of itunes.
    So i have my music on my pc, and i load every type of music as a single playlist (ex a Pop-Rock folder, with all artists folders and so on, makes me a Pop-Rock playlist).
    For my iphone, i created a iphone music folder, with the same classification.
    It means that i don't have all my Pop-Rock music, only a selection. But of course the selected music appears also in my complete music collection.
    So in itunes i created a folder playlist named iphone music, with inside one playlist by type of music (exemple : Pop-Rock, which contains some files of my main Pop-Rock collection).
    So i do have duplicates in my hard drive. But when i selected the playlists to be shared on home sharing in itunes, i selected only the main playlists, not my iphone playlists! But still, when i look for ACDC artist for example, i should see only what i have on my pc, not what i have also on my iphone.
    The result is if i play an album for example Back In Black (i have it full on my hard drive, and full on my iphone too), then every song is displayed in remote app in double, and also played in double:
    Here is how it is displayed:
    Song 1
    Song 1
    Song 2
    Song 2
    So the remote app plays Song 1 one time, then Song 1 (the second Song 1) one time and continues like this to Song 2 etc...
    I guess that if i put my selection of songs on my ipad, i will then have everything in triple....
    It is very annoying. Is there a way for me to change that? Or for an update to be made (based on ID3 Tag) to not play everything twice or more? It would have an ID3 Tag No Double toggle button.
    I don't want to select from my main music to send elements to my iphone as doing that i lost a lot of music multiple times. This way of doing is not safe at all (at least for me).
    What is possible to do? Is there room for improvement here (i believe so). Is there a way for me to avoir this very annoying effect?
    I would really like to put my music to my iPad2 also, but after i'll have triple play....
    Thank you for your help.

    Nobody knows? Not even administrators?
    Please it would be really nice to have help on that to take all the benefit of the remote app.
    Thank you very much in advance.

  • Using the Remote App and playing iTunes from a shared Library

    I have a playlist set up in my main iTunes library on my iMac.  This is a shared library on my local network at home.  I can access and play the library remotely from my MacBook.  I want to move my MacBook outside with external speakers for a party.  I want to be able to access the shared library from the iMac inside the house from my MacBook and be able to control it with the Remote App.
    My problem is that when I use Remote and the MacBook outside (I've set up the iTunes passcode with that computer and my iPod) it will only recognize the library on that computer, even if I am logged in to the shared library and it is visible in the MacBook.  So basically, remote is doing what it is suppose to do in a normal situation, but I need it to recognize and play from the shared library.
    When I turn on home sharing on the iPod I can access all the libraries on the various macs in our house, but the music will only play out of that particular machines speakers.
    I don't have wireless speakers, so I can't think of another way to do this.  Is there?
    Thanks, Sandy

    Well, I've got it to work although not ideal. 
    1. On my main computer (iMac) I created the playlist that I want available to control at a party.
    2. I went to iTunes settings/Sharing and selected "Share selected playlists" and checked the playlist I made for a party.
    3. I Linked my iPod to MacBook (which is outside with external speakers) using the 4 digit code
    4. iPod, Home Sharing Off
    5. Select the Library on iPod
    6. Select "More" (bottom right of iPod)
    7. Select "Shared" from the list that appears
    8. Select the computer that has the shared library
    9. Select the playlist (or lists if you created others)
    This setting is allowing me to use my iPod "Remote App" to play an iTunes playlist (or the entire catalogue) from a shared library on my MacBook WITH the sound coming from my MacBook and NOT from my iMac where the original iTunes catalogue is located.
    Not sure if this is the easiest way, but it's working.

  • HT1947 I can't connect my iPhone to my iTunes using the Remote app

    I've looked at all the instructional help threads, done everything multiple times and when I connect my iPhone to iTunes, it still doesn't work. The Remote app icon doesn't show up under devices in iTunes. I have tried to reconfigure my iTunes settings but I can't find the option, "Look for ipod touch, iphone and ipad remotes" under my preferences. HELP!

    If your iPhone is not seeing your computer, then something on your network is blocking it. Do you use any security software on your computer? Check your router to make sure that it is not blocking any of the following ports, referred to your router manual if you need to do so:
    80 TCP (http)
    123 TCP/UDP (time server)
    443 TCP (https)
    554 TCP/UDP (rtsp)
    3689 TCP (daap)
    5353 UDP (mdns)
    Specifically, home sharing uses TCP port 3689 and UDP port 5353 to communicate with other devices.

  • Can't use the remote app to enter itunes password on apple TV

    the remote app on my iphone and ipad work really well as a remote control for my apple tv, however if I use the app to enter my Itunes password (typing it on the keyboard)it won't recognise it and I have to use the apple tv remote instead, any ideas?

    Don't have an answer, but this guy http://tidbits.com/article/12126 says you can do it, but doesn't explain how. I would love to know - using YouTube on Apple TV is a complete pain cos you have to enter your search terms using the Apple Remote and it takes forever.

  • I can use the Remote app to access my Itunes but cannot make it work with appletv

    I can currently use remote app on my Ipad2 to access my windows desktop itunes library.  I cannot use the remote to access appleTV.  I am setting something up wrong?  Home sharing is turned on, apple tv can access the internet no problem.  The remote app just connects to my itunes library and that's it
    thanks for any help.

    The remote app requires home sharing to be enabled on Apple TV and both to be on the same network. If those aren't in place you will need to purchase a new remote.

  • HT1555 I reset Apple TV using the remote app without having the physical remote control.  Now I am unable to use the menu items to reset it up without the physical remote and the Remote apps on my other Apple devices will no longer control it.  What can I

    I lost my physical remote for Apple TV and the Remote apps on all my other devices no longer control it.  What can I do?

    You need to find your old remote or buy a new one.
    AC

Maybe you are looking for

  • Having a hard time getting iMac (Alum) to start up

    I had to force restart my imac because it ended up freezing in Front Row. When it restarted it didn't pick up that my Time Maching Hard Drive was connected, so later in the day I restarted again and it will usually pick it up and when I restarted it

  • When I click on a link in email, firefox won't open the site unless I click "allow". How do I turn this off?

    On the new tab I get this message: Firefox prevented this page from automatically redirecting to another page.

  • Problem starting a extended server.

    Hi, I'm using Weblogic 10 and I created a Weblogic domain with the default settings, after that I extended the server with a .jar from a Domain that uses GroupSpace and is using Oracle as the DB. When I start the server I'm getting this error: <19/02

  • IMPORT error :  ORA-01631

    Hi, I am impoting a dump file to a Oracle 8.1.7 database. Before the import, I have manually created all the tablespaces required. Now I'm getting an error while importing rows: ORA-01631: max # extents (100) reached in table <..> IMP-00018: partial

  • Is PS WebServer IP address bound in any configuration files?

    We are moving our 8.20 and 8.44 tools Peoplesoft Web Servers (HCM and FSCM) to new hardware (via Physical to Virtual process). The Server names won't change though the IP addresses will. I wanted to double check with the community users to see if IP